3 3.1 Attach TV to Wall Plate 3.2 Unlock the Wall Plate Press the button on wall plate 10 to release the safety latch. NOTE: “L” pin 16 is provided to release or engage the safety latch when your TV is installed. Hang Your TV ALL1 HEAVY! Use assistance with this step. Instruction Manual Use two people to hang the TV, to visually ensure TV bracket 01 is hung correctly onto wall plate 10 (see side view). WE’RE HERE TO HELP IMPORTANT: DO NOT lower TV straight down onto wall plate 10 -- this will engage the lock. Safety latch must be released for proper installation (See STEP 3.1). 01 16 Want to watch a video that shows how easy this DIY project will be? Recommended placement Watch it now at: SANUS.com/2636 Get it right the ﬁrst time. HeightFinder™ shows you where to drill. Our US-based install experts are standing by to help. Check it out at: SANUS.com/1170 Call us at: 800-359-5520 01 Thank you for choosing Sanus Accents! Please take a moment to let us know how we did: 10 Call us: 1-800-359-5520 Or, chat at: SANUS.com/chatSA 10 01 10 10 Side View Find us on Facebook: SANUS Side View 3.3 3.4 Lock the Wall Plate Place magnetic leveling feet 14 in the lower corners of the TV. A NOTE: If needed, use “L” pin 16 to engage the safety latch. CAUTION: Avoid potential personal injury or property damage! The safety latch must be locked, so the TV is securely fastened to the wall plate 10 . 10 09 B If you used spacers 09 in STEP 1.2, stack both magnetic leveling feet 14 together and place in the lower center of the TV. For non-metal back TVs, use adhesivebacked disc 15 . 16 IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE For non-metal back TVs, use adhesivebacked disc 15 . Before getting started, let’s make sure this mount is perfect for you! Does your TV (including accessories) 14 14 15 2 Adjustments Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 to ﬁnd a compatible mount. What is your wall made of? Level 10 Slide the TV side to side. Make sure your TV is locked to wall plate 10 (STEP 3.3). Remove the TV Remove the TV. Loosen both screws 13 , adjust level, then retighten the screws (STEP 2). 13 Disconnect your cables. Unlock wall plate 10 (STEP 3.1). Lift the TV up and away. 3 Call Customer Service: 1-800-359-5520 INCLUDED Do you have all of the tools needed? ( in. [mm] ) 4 23.62 600.0 17.72 450.0 16.00 406.4 1.12 28.6 0.20 5.1 1.5° 5° 2.77 70.3 11.81 300.0 7.87 200.0 15.75 400.0 19.69 500.0 25.50 647.7 0.34 8.8 23.62 600.0 0.98 25.0 Concrete Applications Ready to begin? Awl Pencil Tape Measure Screwdriver Electric Drill Square Driver Bit 1/8 in. (3.2 mm) Wood Drill Bit 5/16 in. (8 mm) Concrete Drill Bit Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for mounting your TV. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service at 1-800-359-5520. CAUTION: Avoid potential personal injuries and property damage! LEVELING 2.95 75.0 3.94 100.0 Wood Stud Applications 10 Stud Finder 24.00 609.6 Unsure? Concrete kit CMK3 required [NOT INCLUDED] Perfect! DO NOT install into drywall alone 16 Solid concrete or concrete block? Drywall with wood studs? CAUTION: Lateral Shift Dimensions No — Perfect! 135 lbs. (61 kg) weigh more than 135 lbs. (61 kg)? Side View 6904-300005 00 SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA Button 15 Follow us on Twitter @sanussystems ©2017 Milestone AV Technologies. All rights reserved. Sanus is a division of Milestone. All other brand names or marks are used for identiﬁcation purposes and are trademarks of their respective owners. 1 Side View Leave a review: accents.sanus.com Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. No Tilt Feature (OPTIONAL) Press down on the safety latch until the button pops up AND you hear a "click". Email us: email@example.com 1.10 27.9 OPTIONAL TILT 3.40 86.4 LATERAL SHIFT ● ● ● ● This product includes directions and hardware for use with wood studs – DO NOT install into drywall alone. The wall must be capable of supporting ﬁve times the weight of the TV and mount combined. Do not use this product for any purpose not explicitly speciﬁed by manufacturer. Manufacturer is not responsible for damage or injury caused by incorrect assembly or use. 1 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used. Attach TV Bracket to TV 1.1 Select Your TV Screws 1.2 M6 Center TV bracket 01 on your TV's TOP hole pattern and securely attach using hardware conﬁguration A or B , depending on your TV needs. IMPORTANT: TV bracket 01 must be oriented on the TV as shown. M8 Parts and Hardware for STEP 1 Attach the TV Bracket A TV Bracket B • Flat Back TV [AND TV closer to the wall] • Rounded Back TV • Extra Space Needed [for cables or inset holes] Top of TV 01 x1 Top of TV CAUTION: Verify thread engagement of the screw or spacer/screw combination in STEP 1.2. — Too short will not hold the TV — Too long will damage the TV TV Screws 02 x2 M6 x 12mm 03 x2 06 x2 M6 x 20mm 01 M6 x 35mm Correct Correct 09 A 07 x2 01 B 06 07 02 03 04 05 M8 x 35mm 04 x2 Washers M8 x 16mm Too Long Too Short Spacers 08 05 x2 M8 x 20mm M6/M8 2 22mm 08 x2 09 x2 09 Parts and Hardware for STEP 2 Driver Bit (Square) Washers 11 x1 Wood Screws (Wall Plate Screws) 13 x2 #10 x 2 1/2 in. 12 x2 * (NOT INCLUDED) For concrete installations: Concrete Anchor Kit CMK3 * Contact customer service at 1-800-359-5520 to have these anchors shipped directly to you. C1 x2 Fischer UX8x50R Anchor WOOD STUD OPTION 2A 10 x1 09 08 Attach Wall Plate to Wall 2.1A Wall Plate Inset Holes Cables 2.2A Verify Your Wall 2 1 Min. 3 1/2 in. (89 mm) Min. 1 1/2 in. (38 mm) Max. 5/8 in. (16 mm) Find the Stud Centers 3 2.3A Attach the Wall Plate 3 2 1 10 Min. 16 in. (406 mm) 11 10 CAUTION: Avoid potential personal injuries and property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm). ● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm). ● Minimum horizontal space between fasteners: 16 in. (406 mm). ● Stud centers must be verified – not all walls have conventional 16 in. (406 mm). Locate the studs using a stud ﬁnder. Probe the wall with an awl or drill bit to verify the stud edges. Mark the center of both studs. Min. 16 in. (406 mm) Position wall plate 10 at your desired height. Level, then mark the two hole locations. Drill two pilot holes using a 1/8 in. (3.2 mm) drill bit. IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (63 mm). 13 12 Install wall plate 10 with two washers 12 and screws 13 , using bit 11 . Adjust leveling, if needed, then securely tighten both screws 13 . CAUTION: Improper use could reduce the holding power of screws 13 . DO NOT over-tighten the screws. Parts for STEP 3 (OPTIONAL) ** Disc (Magnetic Leveling Feet) 14 x2 2.1B (Adhesive backed) 15 x2 Part for Adjustments “L” Pin 16 x1 ** medical device such as a pacemaker or implantable cardioverter deﬁbrillator WARNING: This product contains a magnet. If an implanted (ICD) is in use, magnetic ﬁelds may affect the operation of those devices, resulting in serious injury or death. If you have an implanted medical device, keep at least 13 cm (5 in.) between your device and the magnet. Please consult with your physician or medical professional prior to using this product. CONCRETE OPTION 2B Standoff 2.2B Verify Your Wall Attach the Wall Plate 2 1 Min. 8 in. (203 mm) 3 4 10 Min. 8 in. (203 mm) Min. 16 in. (406 mm) CAUTION: Avoid potential personal injuries and property damage! ● Minimum solid concrete thickness: 8 in. (203 mm). ● Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm). ● Minimum horizontal space between fasteners: 16 in. (406 mm). ● Mount wall plate 10 directly onto the concrete surface. C1 10 Min. 16 in. (406 mm) Position wall plate 10 at your desired height. Level, then mark the two hole locations. * 11 Drill two pilot holes using a 5/16 in. (8 mm) masonry drill bit. Insert two anchors C1 (Fischer UX8x50R included in Concrete Anchor Kit CMK3 ). IMPORTANT: Pilot holes must be drilled to a depth of 2.75 in. (70 mm). Never drill into the mortar between blocks. CAUTION: Be sure the anchors are seated flush with the concrete surface. * 13 12 Install wall plate 10 with two washers 12 and screws 13 , using bit 11 . Securely tighten both screws 13 . CAUTION: Improper use could reduce the holding power of screws 13 . DO NOT over-tighten the screws.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project