2015 English General 2_10_1_1.indd

2015 English General 2_10_1_1.indd
CAMERA SUPPORT EQUIPMENT
Heads & Tripod Systems
Pedestal Systems
Jib, Remote Head & Tracking Rails
Remote Controls
Tripods & Cases
Accessories
2015/16
www.libec-global.com
Specifications are subject to change without notice.
The colors in this brochure may differ from actual products because of the printing color inks or photographic conditions.
15/03
CO NTENTS
Beyond Quality Support
3
4
6
13
19
23
33
37
38
41
45
46
Heads & Tripod Systems
Counterbalance
RSPLUS
RS
LX
LIBEC ALLEX
Pedestal Systems
Jib, Remote Head & Tracking Rails
SWIFT JIB
REMOTE HEAD
Control Unit
Tracking Rails
48
49
52
55
57
61
Remote Controls, Tripods & Accessories
Remote Controls
Tripods
Tripod Cases
Accessories
Specifications
2014 tv asahi/TOEI AG/TOEI
1
2
Heads & Tripod Systems / Counterbalance
Counterbalance
Importance of counterbalance
When looking for a suitable tripod head for your camera,
one of the most impor tant aspe cts to conside r is
counterbalancing capability. The counterbalancing function
provides a counterforce to keep the balance between the
tripod head and the camera that is mounted on it. If the right
counterbalance is maintained, the camera remains stationary
at any angle of tilt. You do not need to worry about holding
the camera by hand and yet are able to maintain precise
control of the camera.
RS/RSPLUS counterbalancing capability
The RS/RSPLUS is equipped with an excellent
counterbalancing system that provides a per fect
counterforce that corresponds to the weight and angle of the
camera. A special innerspring mechanism is used for this
system. When the strength of a spring is insufficient, the
head cannot bear the weight of the camera. If a spring is too
strong, the camera will tilt upward. The RS/RSPLUS "variable
counterbalance system" enables users to adjust the strength
of the innerspring within a cer tain range using the
counterbalance knob located on the outside of the head.
Different cameras can be used and a perfect counterbalance
can be set for each individual camera.
Fine-tunable counterbalance knob
The height of the center of gravity
The definitive way to find the most accurate counterbalance
between camera/accessories and a tripod head is to actually
mount the camera on the head. However, you can use this
counterbalance char t to get a rough idea of the correct
counterbalance. The vertical axis of the chart depicts the
height of the gravitational center and the horizontal axis is load
weight (total weight of the camera and accessories). Based on
the combination of these two elements, you can find a suitable
tripod head for your camera. The area between the two curved
lines represents the range of counterbalance that you can set
with the counterbalance adjustment knob. When a standard
lens, microphone and battery are used, the normal height of
the gravitational center is approximately 125mm/4.9"(for a
shoulder type camera) and 75mm/3.0" (hand-held). The height
of the gravitational center will not shift much even when a
different lens or a different battery is used on the back of the
camera. Please be aware that attaching a light or a monitor on
top of the camera will shift the center of gravity.
The height of the center of gravity is the distance from the center of
the camera to the top of the head (or the camera plate). The
shorter this distance, the higher the weight point becomes.
RHP85 Counterbalance chart
MIN
250
MAX
225
200
C.G. ( mm )
Heads & Tripod Systems
Counterbalance chart to help you choose
the perfect tripod head
175
150
125
100
75
50
4
6
8 10 12 14 16 18 20 22 24 26 28 30 32 34
Weight ( kg )
*When the innerspring is set to maximum strength, the tilt angle is limited to ±40 degrees.
3
4
True
Heads & Tripod Systems
RS PLUS
The perfect controllability captures every single movement. Setup,
shooting and transportation. Excellent, user-friendly for all situations.
Libec's stylish and highly-developed technology leads to a new tripod
range. From the studio to the EFP and OB, RS PLUS series is the perfect
tripod system for every broadcast production.
5
6
Heads & Tripod Systems
RS PLUS
Counterbalance Technology
The spring tension of the head can be precisely
adjusted according to the weight of the mounted
camera using the counterbalance adjustment knob.
This provides a perfect counterbalance between the
camera weight and the innerspring tension at any tilt
angle.
Libec's unique balance stabilizer mechanism
prevents even the slightest wobble on the image
caused by the spring-back effect at a stopping tilt
movement. In addition, this mechanism greatly
simplifies the strict adjustment procedures needed for
perfect balancing. First, turn the tilt torque dial to 1 and
balance the camera lengthwise. Then, adjust the spring
tension by turning the counterbalance adjustment knob.
Tilt the camera, once the camera remains stationary,
then the counterbalance adjustment is complete. This
way, the "perfect counterbalance" is easily achieved,
which ensures a stable image even when the pan
handle is released from the shooter's hands.
Generally, the spring tension gets stronger as the
counterbalance adjustment knob is turned clockwise,
increasing tension on the knob. This dif ficulty is
simplified by the head's smooth balancing system
which stabilizes the turning force efficiently. The knob
can be turned with constant force and offers easy and
speedy adjustments.
Torque System
The sealed torque unit contributes to the smooth start
and stop of pan and tilt movement, and produces
precise camerawork just as intended. In addition,
specific silicon grease is applied to ensure ordinary
pan and tilt movement at a wide temperature range
from -40° C/-40° F up to +60° C/+140° F. The variable
seven-step torque switch system covers remarkably
wide torque range, by which an optimum torque is
selectable according to every shooting conditions and
circumstances.
The camera plate is attachable and detachable with
just one touch, promoting speedy and easy setup.
7
750
750
850
8
Excellent performance for lightweight studio camera systems
with small teleprompters
The camera plate is attachable
and detachable with just one
touch, promoting speedy and
easy setup.
Heads & Tripod Systems
850
RS PLUS
RSP-850
RHP85 / T103B / SP-6B / RC-80
System with floor spreader
Long sliding plate
Weight
11.8kg / 26.0lb
Height
79.5 to 191.5cm / 31.5 to 75.5"
Ball diameter
100mm
Section
2STAGE
RSP-850M
RHP85 / T103B / BR-6B / FP-3B / RC-80
System with mid-level spreader
RHP85
Counterbalance range 9 to 20kg / 20.0 to 44.0lb (C.G.125mm)
9
RHP85 Counterbalance chart
Payload
25kg / 55.0lb
Counterbalance
Continuous
Drag mode
7STEP
200
Tilt angle
+90° / -70°
175
Temperature range
-40°C to +60°C / -40°F to +140°F
Bubble level
Illuminated
Camera plate
2 Sliding plates (Standard + Long)
Sliding range
+/-55mm / 2.2"(Standard), +/-85mm / 3.3"(Long)
75
Plate attachment
3/8" screw × 2
50
Spare screw
3/8" screw
Weight
4.1kg / 9.0lb
MIN
250
Weight
11.6kg / 25.5lb
Height
95.5 to 189.5cm / 37.5 to 74.5"
Ball diameter
100mm
Section
2STAGE
MAX
C.G. (mm)
225
150
125
100
4
6
8 10 12 14 16 18 20 22 24 26 28 30 32 34
Weight (kg)
*When the innerspring is set to maximum strength, the tilt angle is limited to +/-40 degrees.
10
Ideal gear for compact system cameras/
digital cinema cameras in the EFP/OB, studio field
Heads & Tripod Systems
750
RS PLUS
The camera plate is attachable
and detachable with just one
touch, promoting speedy and
easy setup.
RSP-750
RSP-750M
RHP75 / RT50B / SP-2B / RC-70
System with floor spreader
RHP75 / RT50B / BR-6B / FP-2B / RC-70
System with mid-level spreader
Weight
8.0kg / 17.6lb
Weight
7.8kg / 17.2lb
Height
65 to 175.5cm / 25.5 to 69.0
Height
85 to 173.5cm / 33.5 to 68.5
Ball diameter
100mm
Ball diameter
100mm
Section
2STAGE
Section
2STAGE
RHP75
11
Counterbalance range
5.5 to 14kg / 12.0 to 31.0lb (C.G.125mm)
Payload
17kg / 37.5lb
Counterbalance
Continuous
Drag mode
7STEP
200
Tilt angle
+90° / -70°
175
Temperature range
-40°C to +60°C / -40°F to +140°F
Bubble level
Illuminated
Camera plate
Sliding plate
Sliding range
+/-55mm / 2.2"
Plate attachment
3/8" screw × 2
Spare screw
3/8" screw
Weight
4.0kg / 8.8lb
RHP75 Counterbalance chart
MAX
MIN
250
C.G. (mm)
225
150
125
100
75
50
2
4
6
8
10
12
14
16
18
20
22
24
26
Weight (kg)
*When the innerspring is set to maximum strength, the tilt angle is limited to +/-40 degrees.
RSP-750C Carbon pipe
RSP-750MC Carbon pipe
RHP75 / RT50C / SP-2B / RC-70
System with floor spreader
RHP75 / RT50C / BR-6B / FP-2B / RC-70
System with mid-level spreader
Weight
7.7kg / 16.9lb
Weight
7.5kg / 16.5lb
Height
65 to 175.5cm / 25.5 to 69.0
Height
85 to 173.5cm / 33.5 to 68.5
Ball diameter
100mm
Ball diameter
100mm
Section
2STAGE
Section
2STAGE
12
Heads & Tripod Systems
RS
The RS models feature their sophisticated high-functionality, backed by
Libec's outstanding technology and quality. Equipped with free-step
ultimate counterbalance system and variable torque switch system with
low-temperature characteristics.
13
250
450
14
The ideal ENG models for the recent light-weight shoulder cameras
Dual-head specification
available for both 75mm
ball diameter and flat
base tripods.
Heads & Tripod Systems
450
RS
RS-450D
RH45D / RT40RB / SP-2B / RC-50
System with floor spreader
Weight
6.7kg / 14.7lb
Height
63 to 173cm / 25.0 to 68.0"
Ball diameter
75mm
Section
2STAGE
RS-450DM
RH45D / RT40RB / BR-6B / FP-2B / RC-50
System with mid-level spreader
RH45D
15
Counterbalance range
4.5 to 10.5kg / 10.0 to 23.0lb (C.G.100mm)
Payload
12kg / 26.5lb
Counterbalance
Continuous
Drag mode
Free plus 3STEP
175
Tilt angle
+90° / -70°
150
Temperature range
-40°C to +60°C / -40°F to +140°F
Bubble level
Illuminated
Camera plate
Sliding plate
Sliding range
+/-40mm / 1.6"
Plate attachment
1/4" screw with video pin
Spare screw
1/4" and 3/8" screws
Weight
2.7kg / 5.9lb
RH45R Counterbalance chart
C.G. (mm)
6.5kg / 14.3lb
Height
82.5 to 171cm / 32.5 to 67.5"
Ball diameter
75mm
Section
2STAGE
MAX
MIN
200
Weight
125
100
75
50
0
2
4
6
8
10
12
14
16
18
Weight (kg)
*When the innerspring is set to maximum strength, the tilt angle is limited to +/-40 degrees.
16
All-round player suitable for shooting any compact camera
Dual-head specification
available for both 75mm
ball diameter and flat
base tripods.
Heads & Tripod Systems
250
RS
RS-250D
RH25D / RT30B / SP-2B / RC-30
System with floor spreader
Weight
6kg / 13.2lb
Height
55 to 165cm / 21.5 to 65.0"
Ball diameter
75mm
Section
2STAGE
RS-250DM
RH25D / RT30B / BR-2B / FP-2B / RC-30
System with mid-level spreader
RH25D
17
Counterbalance range
1.8 to 5kg / 4.0 to11.0lb (C.G.100mm)
Payload
6kg / 13.0lb
Counterbalance
Continuous
Drag mode
2STEP
175
Tilt angle
+90° / -70°
150
Temperature range
-40°C to +60°C / -40°F to +140°F
Bubble level
Illuminated
Camera plate
Sliding plate
Sliding range
+/- 40mm / 1.6"
Plate attachment
1/4" screw with video pin
Spare screw
1/4" and 3/8" screws
Weight
2.5kg / 5.5lb
RH25R Counterbalance chart
MIN
C.G. (mm)
200
Weight
5.7kg / 12.5lb
Height
80 to 164.5cm / 31.5 to 65.0"
Ball diameter
75mm
Section
2STAGE
MAX
125
100
75
50
0
1
2
3
4
5
6
7
8
Weight (kg)
*When the innerspring is set to maximum strength, the tilt angle is limited to +/-40 degrees.
18
Heads & Tripod Systems
LX
Outstanding payload and rigidity with extremely smooth torque
performance at the best value in the range. Remarkably high-performance
features with incomparable cost effectiveness.
19
7
10
20
7
Maximum payload capacity 16kg/35lb
Tripod systems with perfect cost performance for
lightweight studios and broadcasting
Perfect for small cameras attached with monitors and rigs
Payload
16kg / 35.0lb
Payload
8kg / 17.5lb
Counterbalance
FIX
Counterbalance
FIX
Drag mode
2STEP
Drag mode
FIX
Tilt angle
+85° / -65°
Tilt angle
+90° / -80°
Temperature range
-20°C to +60°C / -4°F to +140°F
Temperature range
-20°C to +60°C / -4°F to +140°F
Bubble level
Non illuminated
Bubble level
Non illuminated
Camera plate
Sliding plate
Camera plate
Sliding plate
Sliding range
+/-50mm / 2.0"
Sliding range
+/-40mm / 1.6"
Plate attachment
3/8" screw × 2
Plate attachment
1/4" screw with video pin
Spare screw
3/8" screw
Spare screw
3/8" screw
LX10 Counterbalance chart
Heads & Tripod Systems
10
LX
LX7 Counterbalance chart
300
200
275
175
LX10 Head / RT50B / SP-2B / RC-50
System with floor spreader
21
Weight
7.6kg / 16.7lb
Height
63 to 173.5cm / 25.0 to 68.5"
Ball diameter
100mm
Section
2STAGE
225
LX7
200
LX7 Head / RT30B / SP-2B / TC-70
System with floor spreader
175
150
125
100
75
0
5
10
15
Weight (kg)
20
25
Weight
5.5kg / 12.1lb
Height
56 to 166cm / 22.0 to 65.5"
Ball diameter
75mm
Section
2STAGE
LX10 M
LX10 Studio
LX7 M
LX10 Head / RT50B / BR-6B / FP-2B / RC-50
System with mid-level spreader
LX10 Head (Dual pan handle) / RT50B / DL-3RB
System with dolly
LX7 Head / RT30B / BR-2B / FP-2B / TC-70
System with mid-level spreader
Weight
7.4kg / 16.3lb
Weight
10.9kg / 24.0lb
Weight
5.2kg / 11.4lb
Height
83 to 171.5cm / 32.5 to 67.5"
Height
91.5 to 187cm / 36.0 to 73.5"
Height
81 to 165.5cm / 32.0 to 65.0"
Ball diameter
100mm
Ball diameter
100mm
Ball diameter
75mm
Section
2STAGE
Section
2STAGE
Section
2STAGE
C.G. (mm)
LX10
C.G. (mm)
250
150
125
100
75
50
0
2
4
6
Weight (kg)
8
10
22
Heads & Tripod Systems
PAN, TILT, SLIDE
Head
58
Our new style tripod system provides
greater usability than ever by perfectly performing these three movements
m
m
.
/2
3"
Dual-head specification
available for both 75mm ball
diameter and flat base tripods.
Mountable on sliders, skater
dollies, and other equipment.
Lightweight
Total weight of only 1.3kg/2.9lb
(including pan handle)
Equipped with a
3/8" spare screw
LED bubble level
Tripod
Capture the ideal shot with
your desired camera
23
Rigidity
In s pite of its light we ight of onl y
2.5kg/5.5lb, the LIBEC ALLEX tripod
has significantly higher rigidity than
our existing compact tripods. This
supreme rigidity is achieved by its
newly modified leg stoppers.
Moreover, not only high rigidity but
also a perfect stability is provided by
i ts ex te n d a b l e b rac e a n d s p i ke s
integrated with foot pads.
24
Heads & Tripod Systems
800mm / 30"
Slider platform
Brake knob
Level
Friction knob
ALX H
Leg
Slider
Payload
4kg / 9.0lb
Counterbalance
FIX
Drag mode
FIX
Tilt angle
+90° / -80°
Temperature range -20°C to +60°C / -4°F to +140°F
Tripod mount adapter
1/4" and 3/8" screw holes
Bubble level
Illuminated
Camera plate
Sliding plate
Sliding range
+/-40mm / 1.6"
Plate attachment 1/4" screw with video pin
Spare screw
3/8" screw
Weight
1.3kg / 2.9lb
Leg lock knob
ALX H Counterbalance chart
200
Bowl clamp
175
C.G. (mm)
Operability
A per fect slider shooting with a smooth and
delicate controllability. This is achieved by the
eight high-performance ball bearings applied with
specific grease, which are installed to the slider
p l at fo r m. T h e b a l l b e a r i n g s a re p o s i ti o n e d
efficiently on the rail top and at an angle on the
other side, sandwiching the rail, to prevent
wobbling during operation.
150
125
100
75
50
* Bowl clamp included
0
1
2
3
4
5
6
7
8
Weight (kg)
ALX T
Pipe material
Aluminum
Weight
2.5kg / 5.5lb
Usability
Height
60 to 150cm / 23.5 to 59"
Ball diameter
75mm
① Legs open and close to 180 degrees that
allows to store the sliderinto the carrying
case without removing the legs.
Section
2STAGE
② The rail can be easily detached and replaced
by using the leg lock knob.
①
②
③ The spring-equipped friction knob enables
precise weightadjustment for a smooth
sliding movement.
④ Using the supplied hexagon wrench,
pushing force of the ballbearing against the
rail can be adjusted.
⑤ Tripod mount adapter and bowl clamp are
included for mounting the slider on 75mm
ball diameter tripods.
③
25
④
⑤
26
Heads & Tripod Systems
ALX S4
Weight
1.4kg / 3.1lb *1
Payload
15kg / 33.0lb *2
Head attachment screw
3/8" screw
Screw holes on the rail's back side 1/4" and 3/8" screw holes
Rail length
400mm / 15.5"
Sliding range
308mm / 12.0"
*1 The weight is excluding tripod mount adapter and bowl clamp.
*2 When not attached to the tripod.
ALX KIT
Weight
3.8kg / 8.4lb
Height
74.5 to 164.5cm / 29.5 to 64.5"
Ball diameter 75mm
Section
2STAGE
ALX S8
Weight
1.8kg / 4.0lb *1
Payload
15kg / 33.0lb *2
Head attachment screw
3/8" screw
Screw holes on the rail's back side 1/4" and 3/8" screw holes
Rail length
800mm / 31.5"
Sliding range
708mm / 28.0"
*1 The weight is excluding tripod mount adapter and bowl clamp.
*2 When not attached to the tripod.
1.
撮影(物撮り)
2.
6.
ALX S4 KIT
Weight
5.4kg / 11.9lb
Ball diameter 75mm
Section
27
2STAGE
ALX S8 KIT
Weight
5.8kg / 12.8lb
Ball diameter 75mm
Section
2STAGE
1. Slider body
2. Tripod mount adapter
3. Maintenance brush
4. Hexagon wrench (2.5mm / 0.1")
5. Bowl clamp
6. Padded carrying case
ALX S12
5.
4.
3.
Weight
2.5kg / 5.5lb *1
Payload
15kg / 33.0lb *2
Head attachment screw
3/8" screw
Screw holes on the rail's back side 1/4" and 3/8" screw holes
Rail length
1200mm / 47"
Sliding range
1108mm / 43.5"
*1 The weight is excluding tripod mount adapter and bowl clamp.
*2 When not attached to the tripod.
28
Slider Platform
ALX SP
Slider Rail
ALX SR12
Length 1200mm / 47"
ALX SR8
Length 800mm / 31.5"
Diagonal
ALX S8 KIT + ALX H
Heads & Tripod Systems
ALX S8 KIT + ALX H
Vertical
ALX SR4
Length 400mm / 15.5"
Double Platform
ALX S12 + ALX SP + ALX H x 2 + ALX T x 2
Excellent flexibility
Vertical, horizontal and diagonal. A perfect slider shot at any angle. The
rail length is freely adjustable thanks to its detachable design. Moreover,
by using two platforms, a still image and a motion picture can be
captured at the same time.
29
30
Yakushiyama Photo Studio / Hyogo, Japan
Handy
The LIBEC ALLEX is an ideal gear for photo shooting. This
bridal studio is having a very special day for one couple.
Shooting with two cameras is essential for impressive bridal
photography. An additional platform is attached to the ALX
S8, and two cameras are mounted on its rail. In this case, the
slider can also work as a studio stand and both vertical and
horizontal shots could be made perfectly. Moving on to the
location shooting with a telephoto lens on a DSLR camera,
the movie shooting starts. The combination of pan, tilt and
slide movements creates a complete unit y of smooth
operation.
Július Lienbenberger, DOP / Slovakia
Július Lienbenberger, a Slovak DOP, has shot a short film
"Bugs Life" with the Blackmagic Pocket Cinema Camera and
the Libec ALX S8 KIT. The "Bugs Life" is a film featuring the
beetles' harsh lives in the world of nature. The ALX S8 KIT,
with its supreme usability and portability, has realized an
ideal shooting in various places including forests and
highlands, and also in difficult places where conventional
gears can not be used. Since the AL X S8 KIT achieves
smooth movement even at the slowe st speed, it has
produced a dynamic image in the film, mainly by the close up
slider shots.
31
Mobile
32
Pedestal Systems
Pedestal Systems
Pedestal Systems
Easy-setup compact pedestals
These compact pedestals are designed for both
outside broadcasting and studio shooting, with a
maximum load weight of 30kg/66lb (head included).
Setup is easy by using the supplied air pump to adjust
the air pressure according to the weight of your
camera and accessories. In addition, the double
bearing system is applied to prevent wobbling
generated by quick vertical motion, which ensures a
smooth movement.
33
34
Pedestal Systems
Pedestal Systems
P110B Outside Broadcast Version
Large sized Ø125mm/4.9"
casters provide quick smooth
movement. The double
stopper mechanism enables a
one-touch locking of the wheel.
Payload
30kg / 66lb (Including head)
Weight
15.1kg / 33.2lb
Height
82.5 to 157.5cm / 32.5 to 62.0"
Ball diameter
100mm
Column
2STAGE
P110S Studio Version
The P110S is equipped with
the tracking locking
mechanism and cable guards
which come standard with the
large-sized double-wheel
125mm/4.9"casters. The
tracking locking mechanism
ensures straight-line movement
by locking the caster direction,
while the cable guards prevent
the wheels from running over the cable during
studio production.
35
RSP-850PD(B)
RSP-750PD(B)
RHP85 / P110B / PH-8B×2
RHP75 / P110B / PH-8B×2
Long sliding plate
25kg / 55.0lb
Payload
17kg / 37.5lb
Weight
19.5kg / 42.9lb
Weight
19.4kg / 42.7lb
Height
100 to 175cm / 39.5 to 69.0"
Height
100 to 175cm / 39.5 to 69.0"
Payload
Ball diameter 100mm
Ball diameter 100mm
Column
Column
2STAGE
2STAGE
RSP-850PD(S)
RSP-750PD(S)
RHP85 / P110S / PH-8B×2
RHP75 / P110S / PH-8B×2
Long sliding plate
17kg / 37.5lb
Payload
25kg / 55.0lb
Payload
Payload
30kg / 66lb (Including head)
Weight
23.0kg / 50.6lb
Weight
22.9kg / 50.4lb
Weight
18.6kg / 40.9lb
Height
98.5 to 173.5cm / 39.0 to 68.5"
Height
98.5 to 173.5cm / 39.0 to 68.5"
Height
81 to 156cm / 32.0 to 61.5"
Ball diameter 100mm
Ball diameter 100mm
Ball diameter
100mm
Column
Column
Column
2STAGE
2STAGE
2STAGE
36
Quick, Compact, Dynamic
Versatile player at any location
The SWIFTJIB50 is equipped with a telescopic arm extendable
to 90cm/35.5" that offers you higher angles than our existing
Libec jib arms. With this new SWIFTJIB50, you can achieve
dynamic high-angle shots by using in conjunction with remote
head, as well as delicate camerawork operated from the front.
Quick and easy set up. Por table and light weight in the
carrying case excluding weights. Achieve your ideal shot with
only a small crew, anytime anywhere. The telescopic jib arm
SWIFTJIB50 offers you an all-round support, true to its name.
Jib, Remote Head & Tracking Rails
SWIFT JIB
SWIFT JIB50 KIT
Jib arm
SWIFT JIB50
Tripod
T102B
Dolly
DL-8B
Standard kit of the SWIFT JIB
Jib, Remote Head &
Tracking Rails
All black color, including tripod and dolly. Standard kit of the
SWIFT JIB50 comes with carrying cases for each item: jib arm,
tripod and dolly.
Note: Weight sold separately
37
38
Jib, Remote Head & Tracking Rails
SWIFT JIB
SWIFT JIB / REMOTE HEAD
SWIFT JIB50
Telescopic jib-No extra arms required
4.
3.
1. Padded carrying case
2. Swift Jib
3. 75mm adapter
4. Adjusting weight ×1kg/2.2lb
Payload
Min : 201cm / 79.0" Max : 261cm / 102.5"
2.
Min : 239.5cm / 94.5" Max : 299.5cm / 118.0"
Min : 38.5cm / 15.1"
Max : 50.5cm / 20.0"
1.
135cm / 53.0"
Min : 43cm / 17.0"
Max : 100cm / 39.5"
100cm / 39.5"
① 20kg / 44.0lb (Main arm length : 100cm / 39.5")
② 15kg / 33.0lb (Main arm length : 145cm / 57.0")
③ 10kg / 22.0lb (Main arm length : 190cm / 75.0")
Main arm length
100 to 190cm / 39.5" to 75.0"
Weight
16.4kg / 36.1lb
Ball diameter
100mm
39
The Handle50 can be clamped on
the weight bar of the SWIFT JIB50.
Max : 338cm / 133.0"
Min : 43cm / 17.0"
Max : 76.5cm / 30.0"
Min : 96.5cm / 38.0"
Max : 156.5cm / 61.5"
HANDLE 50
190cm / 75.0"
Min : 117cm / 46.0"
Max : 177cm / 69.5"
Standard weight kit of 30kg/66.0lb:
2 sets of 15kg/33.0lb weights
(5kg/11.0lb x 2,
2.5kg/5.5lb x 2)
Clamp handle for SWIFT JIB50
225cm / 88.5"
Min : 278cm / 109.5"
WEIGHT30 KIT
Min : 316.5cm / 124.5"
Max : 376.5cm / 148.0"
User-friendly design
40
Jib, Remote Head & Tracking Rails
REMOTE HEAD
Pan and tilt head
REMO30
Capture your imagination from start to finish
Payload
5kg / 11.0lb
Weight (Pan and tilt head)
4.5kg / 9.9lb
Weight (Control box)
0.7kg / 1.5lb
360°pan/tilt speed
9sec.
Power supply
AC100-240V DC12V
Tilt arm
locking handle
Tilt arm
Cable lead
(Tilt)
outdoor shootings under severe climate conditions. The
REMO30 is an universal remote head, it can be used with other
equipment such as tripods and jib arms you already own. You
can also enhance your convinience with various optional
products, I.e. control unit CU30 which allows a more efficient
remote operation, zoom & focus control ZFC-5HD available for
LANC*(Sony/Canon) and Panasonic cameras, and other items.
What is most expected of a remote head is to perfectly perform
your camerawork just as you intend on remote operation. The
REMO30 is a high-grade remote head that exceeds your
expectations. It is equipped with a unique drive system that
transmits motor power accuracy. Every movement can be traced
at an ideal speed: pan, tilt, and also diagonal movement which is
achieved by combining the power of pan and tilt motors. The
REMO30 is splash proof, (meets IPX2 standards), it can tolerate
Tilt drive
Adapter plate
Tilt drive switching
lever
1. Pan and tilt head
2. Control box
3. Adapter plate
4. AC/DC adapter
5. 5m/16.5' control cable for head,
LANC and monitor
6. 5m/16.5' HDMI cable
7. 1m/3.3' LANC cable
8. 1m/3.3' BNC cable
9. BNC to RCA adapter
10. HDMI to Mini HDMI adapter
11. Carrying case
Pan drive
Cable lead (Pan)
Pan arm
(Reverse angle)
− LANC OUT
− CONTROL CABLE
− VIDEO IN
Base attachment (75mm/100mm)
Bowl clamp
Control box
Flexible jib clamp
11.
Power on/off
Direction switches for
pan and tilt (motion off)
Speed controls for
pan and tilt
1.
DC IN
6.
CONTROL CABLE
LANC IN
8.
5.
10.
9.
2.
Joystick
MONITOR OUT
V - mount plate
7.
3.
41
4.
*LANC is a registered trademark of Sony Corporation.
42
A perfect, bird's-eye view
When mounted upside
down, you can achieve a
complete bird's-eye shot.
Flexible mounting on 75mm/100mm
jib arms and tripods
Variable speed control
Pan & tilt lock system
Battery powered operations
Various cables and adapters included
Control cable for head, LANC and monitor
Control cable for head, and LANC
Available for both 75mm and
100mm types. It mounts on
nearly any 75mm/100mm jib
arms and tripods.
Easy and accurate camera balancing
Jib, Remote Head & Tracking Rails
REMOTE HEAD
The REMO30 ensures a perfect camera balance. This prevents
motor and drive stalling during tilt movements. Instead, it
of fers smooth camerawork at all times. Equipped with a
80mm/3.0" sliding adapter plate, which aids back and forth
balancing of a camera. For center of gravity positioning, fine
tune adjustments can be achieved with the tilt arm at 90
degrees.
Tangle-free cabling
All-in-one cable connection
Cable can be routed through the cable leads to prevent
tangling, which offers a comfortable operation.
Pan & tilt control, LANC, and monitor cables are combined in
a single control cable.
CABLE500
Length
5m / 16.5'
CABLE5000
Length
50m / 165.0'
Video signal cable is not included.
Note: When the CONTROL CABLE is used for monitor output with the HD-SDI cable, noise and image interruption symptoms may occur.
In case of HD-SDI output usage, please connect the HD-SDI BNC coaxial cable from the camera to the monitor separately.
43
Note: If the cable length exceeds 30m/99.0', it may cause noticeable noise on the monitor.
44
Jib, Remote Head & Tracking Rails
Tracking Rails
Control Unit
Tracking rail standard kit
CU30
TR-320
1. Carrying case
2. Vest
3. T-bar (Main bar + Support pipe)
4. Handle
5. Tripod adapter
1. Dolly carrying case
2. Dolly
3. Rail carrying case
4. Rail (80cm/31.5" pipe x 8)
5. Rail stopper
320cm / 126.0"
73cm / 28.5"
1.
1.
4.
2.
3.
5.
Move freely with the vest
The CU30 is a remote control unit for the REMO30. The
main advantage of this unit is that while one person
concentrates on handling a crane or a jib arm, the other
person can operate the remote head with the control box.
The remote head operator can wear a Libec vest, attach
the T-bar to it, while having the REMO30 control box on
the right hand, the ZFC-5HD zoom and focus control on
the left, and a monitor with a ball head attached at the
front. This allows the remote head operator to move
around freely, adding production value when shooting with
a small crew. Using the supplied tripod adapter, the unit
can also be mounted on a tripod.
2.
5.
3.
Stable use with a tripod
4.
The TR-320 includes a set of 80cm/31.5"
aluminum pipes to construct a
320cm/126.0" tracking rail. The dolly offers
high-performance bearings and a
specialized tracking system to prevent
derailing. This allows smooth moving shots
on either straight or curved rails. With a
simple screw-in mechanism, pipes can be
easily and firmly assembled, which enables
a quick set up. The CR-90 curved rail and
the EX-160S straight extension rails are also
available, which offers more shooting
flexibility.
Straight extension rail
EX-160S
The EX-160S is an option for those who need to extend an
extra straight rail. It includes 80cm/31.5"×4 pipes.
The vest is adjustable to fit any size, as well as the control
box free to position.
Functional for remote operation
Mounts on standard 75mm/100mm jib arms and tripods.
Extension length
160cm / 63.0"
Weight
2.3kg / 5.1lb
Outer rail radius
168cm / 66.0"
Weight
3.5kg / 7.7lb
90 degrees curved rail
CR-90
The CR-90 is a versatile 90 ° curved rail that can be used with
straight rails to make 45°or 90°curves.
Control cables can be connected to extend up to 30m/99.0'
in length for remote operation.
45
46
Trust
Remote Controls, Tripods &
Accessories
47
48
Zoom and focus control for LANC(Sony/Canon) and Panasonic cameras
Zoom control for LANC(Sony/Canon) and Panasonic cameras
ZFC-5HD
ZC-3DV
Zoom speed is variable from slowest to fastest by a very sensitive thumb switch.
Versatile usage - the ZC-3DV clamps on tripod pan handles, jib arm and crane
weight bars, stabilizers, monopods and other accessories.
Weight
0.12kg / 0.26lb
Cable length
0.5m / 1.6'
Extension zoom cable for LANC
(Sony/Canon) and Panasonic cameras
EX-530DV
Length
5.3m / 17.5'
Remote Controls, Tripods & Accessories
Remote Controls
REC button (Start/Stop)
Zoom controller
ON / OFF switch for LANC
Zoom speed (High/Low) for LANC
REC button (Start/Stop)
Focus control button for LANC
Converter switch for LANC and Panasonic
(Most Sony and Canon/Panasonic)
Converter switch for LANC and Panasonic
2 positions cable outlet
Zoom control for ENG lenses
Focus dial for Panasonic
Extension zoom cable for ENG lenses
ZC-9Pro
Zoom controller
EX-530Pro
The ZC-9Pro can be used with both Canon and Fujinon 8-pin lenses. Versatile
usage - the ZC-9Pro clamps on tripod pan handles, jib arm and crane weight bars,
stabilizers, monopods and other accessories.
The ZFC-5HD offers precise and variable zoom speed control available for
LANC*(Sony/Canon) and Panasonic cameras, controled by a selector
switch. Equipped with a 2-step zoom speed control for LANC cameras. In
addition, the ZFC-5HD is equipped with a focus control button for LANC
and a focus dial for Panasonic cameras. Exclusively for LANC cameras, the
ZFC-5HD has an on/off remote power switch function which allows your
camera to power on/off remotely. This is ideal when shooting with a jib arm
or crane. Can be clamped on various equipment: tripod pan handles, jib
arm and crane weight bars, stabilizers, monopods and other accessories.
*LANC is a registered trademark of Sony Corporation.
The end of the cable splits into two
parts with 2.5mm submini-jack and
3.5mm mini-jack on each end.
When using Panasonic cameras,
simultaneous control of zoom and
focus can be achieved by plugging
2.5mm and 3.5mm jacks into the
zoom and focus terminals,
respectively.
LANC
Panasonic
Zoom
0.17kg / 0.37lb
Cable length
0.7m / 2.3'
5.3m / 17.5'
Focus
REC/STOP
Zoom speed switch
Camera power ON/OFF
Cable(Connected 8 pin)
Weight
0.16kg / 0.4lb
Size
75 x 50mm / 3 x 2"
Cable length
0.7m / 2.3'
12pin adapter
A-12P
Use for 12pin connector
Extension focus cable for
Panasonic cameras
EX-530HD
REC/RET button
Length 5.3m / 17.5'
Note: When the remote terminal Ø3.5 (focus for Panasonic) is connected to the Panasonic cameras released after August 2009, manual mode is not available
as the iris is fixed to the auto mode. To use the iris in the manual mode, please operate the focus on the camera without connecting the remote terminal Ø3.5.
49
Weight
Length
Converter switch for
Canon/Fujinon lens
Zoom controller
Converter switch for REC/RET
50
Remote Controls, Tripods & Accessories
Remote Controls
Tripods
HEAVY DUTY
SONY PMW EX cameras connectable zoom control
ZC-9EX
(100mm)
Compatible with SONY PMW-EX cameras. Can be used
same as the ZC-9Pro by just removing the EX adapter.
Versatile usage - ZC-9EX clamps on tripod pan handles, jib
arm and crane weight bars, stabilizers, monopods and other
accessories.
Weight
0.2kg / 0.44lb
Cable length
0.7m / 2.3'(main cable)
0.1m / 0.3'(EX connector)
EX adapter
REC/RET button
Converter switch for
Canon/Fujinon lens*
Zoom controller
*The function is not available for XDCAM EX cameras.
Converter switch for REC/RET*
SONY PMW-EX cameras adapter cable
LANC/AV adapter cable
A-3AV
T102B 1STAGE
T103B
The A-9E X is a conversion adapter that allows you to
connect Sony's PMW-EX cameras to zoom controls for
Fujinon's ENG lenses.
Conversion cable available to connect LANC* zoom control
to Sony Handycam* equipped with AV remote terminal.
Designed for heavy duty performance, which is ideal for
studio production and for use with a jib arm. A stable
camerawork is ensured thanks to the outstanding rigidity and
robustness.
Can reach as high as 174cm/68.5". The dual pipe structure
provides high stability and robustness even when extended
to the maximum length, which offers you smooth and steady
camerawork.
A-9EX
Pipe material
Weight
Aluminum
*1
5.4kg / 11.9lb
*2
Pipe material
Aluminum
Weight
6.5kg / 14.3lb*1
Height
69 to 138.5cm / 27.0 to 54.5"
Height
62 to 174cm / 24.5 to 68.5"*2
Ball diameter
100mm
Ball diameter
100mm
Section
1STAGE
Section
2STAGE
Floor spreader for T102B / T103B
SP-6B
Weight
1.2kg / 2.6lb
Mid-level spreader for T102B / T103B
BR-6B
Weight
0.3kg / 0.7lb
Large rubber feet for T102B / T103B
FP-3B
*LANC and Handycam are registered trademarks of Sony Corporation.
51
*1 The weight is excluding spreaders and rubber feet.
*2 Measured with a floor spreader attached. The height will be different if a
mid-level spreader and large rubber feet are attached.
* Spreaders are sold separately.
Weight
0.7kg / 1.5lb
52
Remote Controls, Tripods & Accessories
Tripods
ENG
ENG
(75mm)
(100mm)
RT40RB
RT30B
The RT40RB is designed similar to the 100mm ball tripod
RT50B, which features remarkable stability and rigidity while
providing height and portability required by ENG tripods.
Lightweight design, yet ensures high stability and rigidity.
RT50B
RT50C Carbon pipe
Pipe material
Aluminum
Pipe material
Aluminum
Weight
3.1kg / 6.8lb*1
Weight
2.6kg / 5.7lb*1
Outstanding stability and rigidity, while providing height and
portability required by ENG tripods. Leg joints are equipped
with grips for easy transportation.
Outstanding stability and rigidity, while providing height and
portability required by ENG tripods. Leg joints are equipped
with grips for easy transportation. Lightweight due to the use
of carbon pipe.
Height
47.5 to 157.5cm / 18.5 to 62.0"*2
Height
40.5 to 150.5cm / 16.0 to 59.5"*2
Ball diameter
75mm
Ball diameter
75mm
Section
2STAGE
Section
2STAGE
Pipe material
Aluminum
Pipe material
Carbon
Weight
3.1kg / 6.8lb*1
Weight
2.8kg / 6.2lb*1
Height
47.5 to 158cm / 18.5 to 62.0"*2
Height
47.5 to 158cm / 18.5 to 62.0"*2
Ball diameter
100mm
Ball diameter
100mm
Section
2STAGE
Section
2STAGE
Floor spreader for RT50B / RT50C
SP-2B
Weight
0.9kg / 2.0lb
Floor spreader for RT30B / RT40RB
SP-2B
Weight
0.9kg / 2.0lb
Mid-level spreader for RT50B / RT50C
0.3kg / 0.7lb
Weight
53
0.4kg / 0.9lb
0.3kg / 0.7lb
0.2kg / 0.4lb
Large rubber feet for RT30B / RT40RB
FP-2B
Weight
Weight
BR-2B
Large rubber feet for RT50B / RT50C
*1 The weight is excluding spreaders and rubber feet.
*2 Measured with a floor spreader attached. The height will be different if a
mid-level spreader and large rubber feet are attached.
* Spreaders are sold separately.
BR-6B
Mid-level spreader for RT30B
BR-6B
Weight
Mid-level spreader for RT40RB
FP-2B
*1 The weight is excluding spreaders and rubber feet.
*2 Measured with a floor spreader attached. The height will be different if a
mid-level spreader and large rubber feet are attached.
* Spreaders are sold separately.
Weight
0.4kg / 0.9lb
54
Remote Controls, Tripods & Accessories
Tripod cases
The all-round tripod case for easy transportation
The case is equipped with two wheels and can be pulled
a l o n g b y t h e s i d e h a n d l e g r i p, w h i c h a l l o w s e a s y
transportation on foot. Damages are prevented by the soft
and hard protectors on all sides of the case which absorb
impacts, while the inner strap holds the tripod firmly in place.
This all-round tripod case is designed with high rigidity and
can be safely transported as a check-in luggage during flights.
Tripod case for ENG
RC-50
List of models storable in the RC-70 tripod case
V10AS-AP2F
Vinten
Sachtler
RC-50 is a well designed tripod case for quick and easy
storage with high durability and lightweight portability.
Transport length
Model
86.6cm / 34.1"
V10AS-CP2F
86.6cm / 34.1"
V100-AP2
85.9cm / 33.8"
V100-CP2
85.9cm / 33.8"
SYSTEM18 S1 ENG 2
89cm / 35"
SYSTEM18 S1 ENG 2 CF
89cm / 35"
SYSTEM20 S1 HD CF
94cm / 37"
※
SYSTEM20 S1 HD MCF
94cm / 37"
※
SYSTEM20 S1 SL HD MCF
94cm / 37"
※
※:Storable in the RC-70 tripod case, however space may be tight as the
tripod system's size is 1cm/0.4" longer than the internal length of RC-70.
All-round tripod case
RC-70
Internal dimension
93cm / 36.5゛
Protector
Inner pocket with zipper
Handle grip
Padded shoulder strap
Side handle
Tripod case for RT30B
RC-30
RC-30 is a portable tripod case that enables quick, easy, and
smooth storage. Opens wide and flat for use as a floor mat
for your equipment at shooting sites.
All-round tripod case
RC-80
Internal dimension
Caster
55
107cm / 42.0゛
Inner pocket with zipper
Handle grip
Side handle
Inner strap
56
Remote Controls, Tripods & Accessories
Accessories
Dolly for TH-650HD / ALX KIT
Accessory support kit
DL-2RB
AS-7K
A multiple accessory support that
supports mounting of LCD monitors
and other accessories.
Length
261mm / 10.3"
Attachment
1/4" screw
Weight
0.35kg / 0.8lb
Can be attached to cameras and accessory plates
and also Libec heads by using accessory support
adapter included in the kit*. Fitting angle can be
adjusted flexibly that enables suitable positioning of
accessories.
Weight
2.0kg / 4.4lb
Carrying handle
Standard dolly for RT30B / RT40RB / RT50B / RT50C
*Not attachable to TH-650HD
DL-3RB
Weight
3.9kg / 8.6lb
Adapter plate
AP-1
Carrying handle
Weight
0.2kg / 0.4lb
Versatile length dolly for RT30B / RT40RB / RT50B / RT50C
Available for Vinten and
Sachtler video tripods
DL-5RB
Weight
4.0kg / 8.8lb
Sliding range
18.5cm / 7.3"
Adapter plate
AP-5
Weight
0.4kg / 1.0lb
Sliding range
80mm / 3.1"
Carrying handle
Available for Vinten and
Sachtler video tripods
57
58
Accessories
Dolly for T102B / T103B
DL-8B
Weight
Extendable pan handle for RH25D / RH45D
PH-6B
Reliable
5.9kg / 13.0lb
75mm adapter
AD-75
Extendable pan handle for RHP75 / RHP85 / LX10
PH-8B
Adapter of Libec 75mm heads for
100mm ball diameter tripods.
BL-75R
Long sliding plate for RHP75 / RHP85 / LX10
Sliding Plate L
Weight
59
0.2kg / 0.4lb
60
Specifications
Model
TH-650HD
̶
Payload
Counterbalance mode
Drag mode
Weight
Height
Ball diameter
Section
̶
3kg / 6.5lb
FIX
FIX
3.2kg / 7.0lb
70 to 150cm / 27.5 to 59.0"
65mm
2STAGE
LIBEC ALLEX
̶
Head
Tripod
Spreader
Case
Dolly
Others
̶
Payload
Counterbalance mode
Drag mode
Weight
Height
Ball diameter
Section
ALX KIT
̶
ALX H
ALX T
̶
RC-20
̶
̶
̶
4kg / 9.0lb
FIX
FIX
3.8kg / 8.4lb
74.5 to 164.5cm / 29.5 to 64.5"
75mm
2STAGE
ALX S4 KIT
̶
ALX H
ALX T
̶
RC-20
̶
ALX S4
̶
4kg / 9.0lb
FIX
FIX
5.4kg / 11.9lb
̶
75mm
2STAGE
ALX S8 KIT
̶
ALX H
ALX T
̶
RC-20
̶
ALX S8
̶
4kg / 9.0lb
FIX
FIX
5.8kg / 12.8lb
̶
75mm
2STAGE
̶
Head
Tripod
Spreader
Case
Dolly
Others
̶
Payload
Counterbalance mode
Drag mode
Weight
Height
Ball diameter
Section
SP-2B
TC-70
̶
̶
̶
8kg / 17.5lb
FIX
FIX
5.5kg / 12.1lb
56 to 166cm / 22.0 to 65.5"
75mm
2STAGE
BR-2B/FP-2B TC-70
̶
̶
̶
8kg / 17.5lb
FIX
FIX
5.2kg / 11.4lb
81 to 165.5cm / 32.0 to 65.0"
75mm
2STAGE
RC-50
̶
̶
̶
16kg / 35.0lb
FIX
2STEP
7.6kg / 16.7lb
63 to 173.5cm / 25.0 to 68.5"
100mm
2STAGE
BR-6B/FP-2B RC-50
̶
̶
̶
16kg / 35.0lb
FIX
2STEP
7.4kg / 16.3lb
83 to 171.5cm / 32.5 to 67.5"
100mm
2STAGE
Model
LX
Model
LX7
̶
LX7 Head RT30B
LX7 M
̶
LX7 Head RT30B
LX10
̶
LX10 Head RT50B
LX10 M
̶
LX10 Head RT50B
LX10 Studio
̶
LX10 Head RT50B
SP-2B
̶
̶
DL-3RB
PH-8B(Extra)
̶
16kg / 35.0lb
FIX
2STEP
10.6kg / 23.3lb
91.5 to 187cm / 36.0 to 73.5"
100mm
2STAGE
RS
̶
Head
Tripod
Spreader
Case
̶
̶
Counterbalance range
Payload
Counterbalance mode
Drag mode
Weight
Height
Ball diameter
Section
RS-250D
̶
RH25D
RT30B
SP-2B
RC-30
̶
̶
1.8 to 5kg / 4.0 to 11.0lb
6kg / 13.0lb
Continuous
2STEP
6kg / 13.2lb
55 to 165cm / 21.5 to 65.0"
75mm
2STAGE
RS-250DM
̶
RH25D
RT30B
BR-2B/FP-2B RC-30
̶
̶
1.8 to 5kg / 4.0 to 11.0lb
6kg / 13.0lb
Continuous
2STEP
5.7kg / 12.5lb
80 to 164.5cm / 31.5 to 65.0"
75mm
2STAGE
RS-450D
̶
RH45D
RT40RB
RC-50
̶
̶
4.5 to 10.5kg /10.0 to 23.0lb
12kg / 26.5lb
Continuous
Free plus 3STEP
6.7kg / 14.7lb
63 to 173cm / 25.0 to 68.0"
75mm
2STAGE
RS-450DM
̶
RH45D
RT40RB BR-6B/FP-2B RC-50
̶
̶
4.5 to 10.5kg /10.0 to 23.0lb
12kg / 26.5lb
Continuous
Free plus 3STEP
6.5kg / 14.3lb
82.5 to 171cm / 32.5 to 67.5"
75mm
2STAGE
̶
Head
Tripod
Spreader
Case
̶
Others
Counterbalance range
Payload
Counterbalance mode
Drag mode
Weight
Height
Ball diameter
Section
RSP-750
̶
RHP75
RT50B
SP-2B
RC-70
̶
̶
5.5 to 14kg / 12.0 to 31.0lb
17kg / 37.5lb
Continuous
7STEP
8.0kg / 17.6lb
65 to 175.5cm / 25.5 to 69.0"
100mm
2STAGE
RSP-750M
̶
RHP75
RT50B
BR-6B/FP-2B RC-70
̶
̶
5.5 to 14kg / 12.0 to 31.0lb
17kg / 37.5lb
Continuous
7STEP
7.8kg / 17.2lb
85 to 173.5cm / 33.5 to 68.5"
100mm
2STAGE
RSP-750C
̶
RHP75
RT50C
RC-70
̶
̶
5.5 to 14kg / 12.0 to 31.0lb
17kg / 37.5lb
Continuous
7STEP
7.7kg / 16.9lb
65 to 175.5cm / 25.5 to 69.0"
100mm
2STAGE
RSP-750MC
̶
RHP75
RT50C BR-6B/FP-2B RC-70
̶
̶
5.5 to 14kg / 12.0 to 31.0lb
17kg / 37.5lb
Continuous
7STEP
7.5kg / 16.5lb
85 to 173.5cm / 33.5 to 68.5"
100mm
2STAGE
RSP-850
̶
RHP85
T103B
RC-80
̶
Sliding Plate L
9 to 20kg / 20.0 to 44.0lb
25kg / 55.0lb
Continuous
7STEP
11.8kg / 26.0lb
79.5 to 191.5cm / 31.5 to 75.5"
100mm
2STAGE
RSP-850M
̶
RHP85
T103B
BR-6B/FP-3B RC-80
̶
Sliding Plate L
9 to 20kg / 20.0 to 44.0lb
25kg / 55.0lb
Continuous
7STEP
11.6kg / 25.5lb 95.5 to 189.5cm / 37.5 to 74.5"
100mm
2STAGE
Model
SP-2B
RS PLUS
Model
SP-2B
SP-6B
Pedestal Systems
61
Model
Pedestal
Head
̶
̶
̶
Dolly
Others
Counterbalance range
Payload
Counterbalance mode
Drag mode
Weight
Height
Ball diameter
Column section
RSP-750PD(B)
P110B
RHP75
̶
̶
̶
DL-8B
PH-8B(Extra)
5.5 to 14kg / 12.0 to 31.0lb
17kg / 37.5lb
Continuous
7STEP
19.4kg / 42.7lb
100 to 175cm / 39.5 to 69.0"
100mm
2STAGE
RSP-750PD(S)
P110S
RHP75
̶
̶
̶
DL-10B
PH-8B(Extra)
5.5 to 14kg / 12.0 to 31.0lb
17kg / 37.5lb
Continuous
7STEP
22.9kg / 50.4lb 98.5 to 173.5cm / 39.0 to 68.5"
100mm
2STAGE
RSP-850PD(B)
P110B
RHP85
̶
̶
̶
DL-8B PH-8B(Extra) / Sliding Plate L
9 to 20kg / 20.0 to 44.0lb
25kg / 55.0lb
Continuous
7STEP
19.5kg / 42.9lb
100 to 175cm / 39.5 to 69.0"
100mm
2STAGE
RSP-850PD(S)
P110S
RHP85
̶
̶
̶
DL-10B PH-8B(Extra) / Sliding Plate L
9 to 20kg / 20.0 to 44.0lb
25kg / 55.0lb
Continuous
7STEP
23.0kg / 50.6lb 98.5 to 173.5cm / 39.0 to 68.5"
100mm
2STAGE
62
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement