VIDEO BABY MONITOR
VB602
Overview of your Parent unit
WELCOME…
VIDEO BABY MONITOR
to your new
E808 PLUS Baby Monitor!
USER’S GUIDE
8
1
6
5
Thank you for purchasing the VB601. Now you can see
9
4
and hear your baby sleeping in the other room or you can
Overview of your Baby unit
7
2
monitor your older children in their playroom.
3
This User’s Guide provides you with all the information
you need to get the most from your product.
1.
LCD display
Before you can use the baby monitor, we recommend
2.
Menu key / Music play control key(long press)
1.
Light Sensor
you insert and fully charge the battery in the parent unit,
3.
Power key / Return key
2.
Infrared LEDS
so that it continues to work if you disconnect it from the
4.
Volume – key / Down key (menu screen)
3.
Camera Lens
mains power to carry it to another location. Please read
5.
Volume + key / Up key (menu screen)
4.
Power LED
the Safety Instructions on page 6 before you install the
6.
PTT key
5.
Microphone
units.
7.
Microphone
6.
Speaker
8.
Speaker
7.
Pair key
9.
Power adapter connector
8.
Temperature Sensor
9.
Power adapter connector
Got everything?
1 x Parent Unit
1 x Baby Unit
2 x Power adapter
1 x Mounting kits (Screws)
Table of contents
1. Safety Instructions
2.Getting started
1.Safety Instructions ……………………………….……6
WARNING
2.1 Baby unit power supply
2.Getting started .........................................................7
This baby monitor is compliant with all relevant standards
2.1 Baby unit power supply .................................7
regarding electromagnetic fields and is, when handled as
2.2 Parent unit power supply................................8
described in the User’s Guide, safe to use. Therefore,
3. Using the Baby Monitor VB601. ..............................9
always read the instructions in this User’s Guide carefully
3.1 Setting up ....................................................9
before using the device.
3.2 Pairing camera............................................10


3.5 Talk function...............................................10
3.6 Adjusting the volume ……………………….10

4. Monitoring screen icons..........................................11
5. Menu Options…………………………………………12
Adult assembly is required. Keep small parts away
from children when assembling.
3.3 Night vision.................................................10
3.4 Music player………………………..………..10
2.2 Parent unit power supply

This product is not a toy. Do not allow children to
play with it.
Charging
This baby monitor is not a substitute for responsible
recommended. This will allow the unit to operate on
adult supervision.
battery in the event of a power failure.
Do not place the baby unit or cables in the cot or
1.
Connect the small plug of the power adapter to the
1.
the
parent
unit
fully
before
use
Connect the plug of the power adapter to the parent
5.1 Main menu ...................................................12
within arm's reach of the baby (at least 1 meter
baby unit and the other end to the mains socket
unit and the other end to the mains socket
5.2 Camera Registration.....................................13
away).
(230V/50Hz).
NOTE: Only use the power adapter provided
NOTE: Only use the power adapter provided
5.3 Alarm............................................................13

Keep the cords out of reach of children.
5.4 Settings........................................................14

Do not use the baby monitor near water or a heat
source
5.5 System info………………………………...….15
6.Wallmounting instructions......................................16

Only use the power adapters provided.

Do not touch the plug contacts with sharp or metal
objects.
2.
2.
A green light led will display indicate the baby unit is
working
is
The
LCD
screen
illuminates
and
starts
up
automatically after a few seconds.
3.
Press and hold
on the parent unit.
key at least 3 seconds to turn
3. Using the Baby Monitor VB601
3.1 Setting up


3.2 Pairing camera
The enclosed baby unit has already been registered ,
4. Monitoring Screen Icons
5.1 Main menu
You do not need to register it again unless the baby unit
Place the baby unit in a convenient location (e.g. on
loses its link with the parent unit. See section “5.2
a table) and point the camera lens towards the area
Camera Registration” for more details.
you want to monitor.Adjust the baby unit until you
3.3 Night vision
are satisfied with the image in the parent unit.
The baby unit has 8 high-intensity infrared LEDs for
To mount the baby unit on the wall, see section“9.
picking up clear images in the dark. When the built-in
Wall mounting instructions”for more details.
light sensor detects a low level of ambient light, the LEDs
5. Menu Options
will automatically activate.
3.4music player
Press and hold
key at least 3 seconds will turn
on the music player and play lullaby through the baby
Press “Menu” key at monitoring screen will enter the
unit; long press the key 3 seconds again will turn off it.
3.5 Talk function
1.
Signal strength indicator
main menu, It contains 4 items :
Press and hold
Temperature of the baby’s room
key on the parent unit to talk to
2.
1.
Camera
NOTE
your baby through the baby unit loudspeaker. The
3.
Lullaby is playing
2.
Alarm
Do not place the baby unit within baby’s reach! If
symbol will be displayed at the bottom of the screen.
4.
Alarm activated
3.
Settings
there is interference on the picture or sound, try
3.6 Adjusting the volume
5.
Battery indicator
4.
System info
moving the units to different locations, and ensure
When the video is playing mode, press ‘-’ key to
6.
PTT function activated
You can press the “Up” key or “Down” key to move
they are not close to other electrical equipment.
decrease volume or ‘+’ key to increase volume. The
7.
Date and time ( DD/MM HH:MM AM/PM)
the cursor to select an item and press “Menu” key will
enter the sub-menu which you selected.
display will show the current volume for 5 seconds.
Press “Return” key will back to monitoring screen.
5.2 Camera Registration
5.4 Settings
5.4.3 Temperature unit
Switch the unit to Celsius or Fahrenheit
Language setting menu allows you to choose your
5.4.4 Anti-flicker
1.
language from the following :
You are able to adjust the frequency of 50 / 60 HZ to
correct places to drill holes for wall-mounting screws

English
suit your lighting for anti-flicker

French
5.4.5 System mode setting

Italian
This menu allows you to choose the working mode

Spanish
from the following:

German
5.4.6 LCD backlight
Use the template below to mark the wall in the
Normal mode / VOX mode
Press “menu” key to entry registering screen, then
5.4.2 Time and date
You are be able to adjust the brightness of the LCD
push the pair key on the back of baby unit within 10
There are contains 2 items in this menu
you are viewing and the LCD backlight active time
seconds.

Set time / date

Set format
5.3 Alarm
6. Wall mounting instructions
5.4.1 Language
in menu operation.
2. Insert 4mm head screws (not supplied) into the holes
and tighten the screws. Then, align your baby unit with
the screws and push it down.
3.
Point the camera lens towards the area you want to
monitor. Adjust the baby unit until you are satisfied with
the image in the parent unit.
5.5 System info
Press “Down” key to choose item, ”PTT” key to
Press “Down” key to choose item, ”PTT” key to
There are contains system information such as
move the cursor and “Up” key to change value .
move the cursor and “Up” key to change value .
Software version ,Hardware version, build date etc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising