RocketRAID 640L
 RocketRAID 640L 6Gb/s SATA RAID Host Adapter
Quick Installation Guide v1.0 1 Contents HighPoint RocketRAID 640L...............................................................3 Kit Contents…………............................................................................3 Hardware Installation.......................................................................4 Using the RocketRAID640L Adapter………...........................................5 RocketRAID 640L BIOS......................................................................5 Driver and Utility Installation (Windows 7, Vista, 2008).....................6 Customer Support.............................................................................7 FCC Part 15 Class B Radio Frequency Interference statement............8 2 HighPoint RocketRAID 640L – 4‐Port SATA 6Gb/s PCI‐E 2.0 HBA RocketRAID 600 Lite HBA’s deliver considerable cost‐savings over competing SATA 6Gb/s solutions, without sacrificing either performance or reliability. These Second Generation SATA 6Gb/s host controllers utilize a PCI‐Express 2.0 x4 host bus interface, and support non‐RAID and RAID configurations of today’s fastest SATA 6Gb devices. The 4‐Port RocketRAID 640L is powered by HighPoint’s industry‐proven RAID Technology. The intuitive BIOS and web‐based Management interfaces allow you to quickly and easily configure RAID 0, 1, 5, 10 and JBOD arrays. Kit contents 



RocketRAID 640L host controller Software CD Quick Installation Guide Low profile bracket 3 Hardware Installation Installing the RocketRAID 640L RAID Host Adapter Note: Make sure the system is powered‐off before installing the RocketRAID 640L RAID Host Adapter. 1) Open the system chassis and locate an unused PCI‐E (2.0 or 1.0) ×4 (or x8/x16) slot. 2) Remove the PCI‐E slot cover. 3) Gently insert the RocketRAID 640L into the PCI‐E slot, and secure the bracket to the system chassis. 4) After installing the adapter, attach the hard disks or disk enclosure to the RocketRAID 640L card using the SATA cables. 5) Close and secure the system chassis. 4 Using the RocketRAID 640L RocketRAID 640L BIOS After installing the RocketRAID 640L RAID Host Adapter, and powering on the system, the adapter BIOS should post. The BIOS will scan for devices and display information about each disk. Note: Scan time may vary depending on the disk’s make/model and disk related features such as Staggered Drive Spinup. When prompted, press “Ctrl + H” to access the RocketRAID 640L BIOS Utility. 5 Driver and Software Installation (Windows 7, Vista, 2008) 1. After installing the RocketRAID 640L host adapter, boot to the Windows operating system. 2. Windows should automatically detect the card, and displays the “Found New Hardware Wizard”. Select “Locate and install driver software”. When Windows asks: “Windows needs your permission to continue”, select “Continue”. 3. When asked to search online select “Don’t Search Online”. 4. Select “I don’t have disc, show me other options”. 5. Select “Browse my computer for driver software”. 6. Browse to the location of the driver and click “Next”. Driver location (RocketRAID Software CD): /RR640L/Driver/Windows 7. Select the driver folder. 8. When asked: “Would you like to install this driver software?” select “Install”. 9. Reboot the system when prompted. The RocketRAID 640L host adapter will be ready for use after Windows reboots. 10. Browse to the location of the HighPoint RAID Management software and double click the setup program to install. Software location (RocketRAID Software CD): /HighPoint RAID Management Software/Web RAID Management/Windows 6 Customer Support If you encounter any problems while utilizing the RocketRAID series RAID Host Adapter, or have any questions about this or any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support Department. Web Support: http://www.highpoint‐tech.com/websupport/ HighPoint Technologies, Inc. websites: http://www.highpoint‐tech.com 7 FCC Part 15 Class B Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC rules. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. European Union Compliance Statement This Information Technologies Equipment has been tested and found to comply with the following European directives:  European Standard EN55022 (1998) Class B  European Standard EN55024 (1998) 8 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising