HD3 Camera 5" Dome Adaptor Plate Installation

HD3 Camera 5" Dome Adaptor Plate Installation
HD3 equIP TM Series Indoor Fixed Mini Dome Network
Camera 5-inch Dome Adapter Plate Installation Guide
Use this 5-inch dome adapter plate from the HD3IP-5K adapter kit if you are:
•
•
Replacing a KD5 camera with an HD3 equIPTM Series Indoor Fixed Mini Dome Network
camera, and you want to use the 5-inch dome bubble.
Installing a 5-inch dome bubble onto your HD3 equIPTM Series Indoor Fixed Mini Dome
Network camera.
Replacing a KD5 camera with an HD3 equIP Series camera
You can flush mount your HD3 equIP Series camera with or without a 4S box.
Installation with a 4S Box Shown
4S Box
(Optional)
1.
Remove your installed KD5 camera. Set aside the 5-inch
dome bubble, and discard the rest.
2.
Install the 5-inch dome adapter plate:
• Without a 4S Box: Use the supplied screws to directly
attach the 5-inch dome adapter plate to the ceiling or wall,
with the gasket between the adapter plate and the
mounting surface.
• With a 4S Box: Use your own screws to attach the
adapter plate to the 4S box, which is already installed in
the ceiling or wall, with the gasket between the adapter
plate and the mounting surface.
Gasket
5-inch Dome
Adapter Plate
Screws (x2)
Camera
assembly
5-inch
Dome bubble
3.
Connect the wires. Refer to the HD3 equIP Series Quick
Install Guide or User Guide for instructions about connecting
the wires.
4.
Secure the HD3 equIP Series camera assembly to the 5-inch
dome adapter plate by inserting it into the 5-inch dome
adapter plate then twisting it clockwise until it clicks securely
into place.
5.
Adjust the camera field of view. Refer to the HD3 equIP
Series Camera Quick Install Guide or User Guide for
instructions about adjusting the camera Field of View.
6.
Install the 5-inch dome bubble:
Dome liner
Note Before installing the 5-inch dome bubble that you have set
aside from your KD5 camera, ensure that the dome liner is
still installed.
Note See the other side of this document for an
illustration of the 5-inch dome adapter plate.
Document 800-06519 – Rev C – 02/2014
a.
Slip the looped end of the safety lanyard on the 5-inch
dome bubble onto the safety lanyard hook on the 5-inch
dome adapter plate. (See the other side of this
document for an illustration of the 5-inch dome adapter
plate.)
b.
Install the 5-inch dome bubble by placing it on the
5-inch dome adapter plate with the tabs to the left of the
slots, then rotating it clockwise until the locking tab
clicks securely into place.
Installing a 5-inch Dome Bubble on your HD3 equIP Series camera
5-Inch Dome Adapter Plate
Locking tab
Attach camera
assembly
4 tabs
You can install a 5-inch dome bubble (that you have
purchased separately) on your HD3 equIP Series camera so
that the 3-inch camera matches your existing 5-inch dome
cameras.
1.
• Without a 4S Box: Use the supplied screws to
directly attach the 5-inch dome adapter plate to the
ceiling or wall, with the gasket between the adapter
plate and the mounting surface.
• With a 4S Box: Use your own screws to attach the
adapter plate to the 4S box, which is already
installed in the ceiling or wall, with the gasket
between the adapter plate and the mounting surface.
Screw holes
Attach 5-inch dome bubble
3 tabs
Safety lanyard hook
5.
Install the 5-inch dome adapter plate:
2.
Connect the wires. Refer to the HD3 equIP Series Quick
Install Guide or User Guide for instructions about
connecting the wires.
3.
Secure the HD3 equIP Series camera assembly to the
5-inch dome adapter plate by inserting it into the 5-inch
dome adapter plate then twisting it clockwise until it
clicks securely into place.
4.
Adjust the camera field of view. Refer to the HD3 equIP
Series Camera Quick Install Guide or User Guide for
instructions about adjusting the camera Field of View.
Install the 5-inch dome bubble (that you have purchased separately):
a.
Slip the looped end of the safety lanyard on the 5-inch dome bubble onto the
safety lanyard hook on the 5-inch dome adapter plate.
b.
Install the 5-inch dome bubble by placing it on the 5-inch dome adapter plate
with the tabs to the left of the slots, then rotating it clockwise until the locking
tab clicks securely into place.
www.honeywell.com/security
+1 800 323 4576 (North America only)
https://www.honeywellsystems.com/ss/techsupp/index.html
Document 800-06519 – Rev C – 02/2014
© 2014 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written
permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot
assume responsibility for any consequences resulting from the use thereof. The information contained herein is subject to change
without notice. Revisions or new editions to this publication may be issued to incorporate such changes.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising