F5404E 4G FC-SATA-II RAID

F5404E 4G FC-SATA-II RAID
F5404E 4G FC-SATA-II RAID
Features
• RAID 1, 5, 6, 10 & 50 support
• Snapshot support for up to 192 snaps
• Four (4) 4Gb/s high speed
Fibre Channel host connections per system
• Up to 48 high performance cost effective SATA drives in Redefining flexibility and availability, the Xyratex F5404E offers
one system
affordable RAID data storage with high performance capabilities.
• StorViewTM controller The Xyratex F5404E sets a new standard in the design of mass storage enclosures and
provides unsurpassed disk storage capacity in a single enclosure. Housing 48 SATA drives in
4U of rack space, the F5404E can store 36TB of data in a single unit. With a combination
of high performance controllers and high density packaging, the fully HA design of the
F5404E increases the flexibility of storage deployment to the end user. The F5404E
provides an ideal solution to the secondary disk storage needs of compliance, disk to disk
backup, and CAS environments.
based or host based Software clearly differentiates the Xyratex F5404E over other near-line storage solutions on
the market today. All models in the Xyratex 5000 series of RAID systems feature StorView
for intuitive administration and performance monitoring. Automated control of individual
controller’s cache, arrays, and devices via a web-based interface simplifies storage
administration, resulting in decreased management costs and improved storage utilization.
All models in the Xyratex 5000 RAID series come with Snapshot. Four snapshots are
available to start implementing point-in-time recovery capabilities. An optional Snapshot
upgrade allows for up to 24 snapshots per Logical Drive and up to 8 Logical Drives in
snapshot mode. A full-function Command Line Interface (CLI) can be used to integrate
array management into existing operational procedures. Available an optional upgrade to
StorView, StorView Global configures, monitors, and manages Xyratex 5000 Series RAID
controllers from any location, anywhere on the network.
The Xyratex F5404E provides the bandwidth needs for disk-to-disk backup, archive, and
other storage intensive applications. The Xyratex F5404E leverages SAS full duplex, pointto-point architecture with dedicated connections for maximum data throughput. With
maximum flexibility, superior performance and continuous availability, the Xyratex F5404E
sets new standards for near-line RAID storage offerings.
management software
• Online capacity growth through dynamic array and LUN expansion • Cableless, modular design
and redundant, hot- swappable components for fault tolerance
• Customizable fascia, SCSI
Inquiry Strings, management interface, multi-path manager
Technical Specification
General Information
Altitude, Power and Temperatures
Product Code
RS-4835-F4-5404E
Operational Altitude
External Interface
4G FC, point-to-point, loop and fabric Non-operational Altitude 12,192m (40,000 ft)
(switched) topologies
Voltage
Supported Operating
Windows 2003 (IA32, EM64T); RedHat Linux
Frequency
60/50 Hz, single-phase
Platforms AS3/AS4 (IA32, EM64T); SuSE Linux 9/10 (IA32, Power Consumption
1100W typical
EM64T)
Temperature Range
Operating: 5º to 40ºC (41º F to 104º F)
Supported Hosts
256, 512 LUNs, LUN Masking, >2TB LUNs
Humidity
Operating: 10% to 80% (non condensing)
Total Capacity per Unit
36TB
Expansion Chassis
RS-4835-E3-XPN (1 maximum), SAS connected, Shock and Vibration
single and dual IO Module configurations
2,133m (7,000 ft)
100-240VAC 5.0A maximum per input
Operational Shock
5g 10ms ½ Sine
Total Expansion Capacity 72TB, 512MB and 1G Cache per controller Operational Vibration
Random 0.21grms 5-500Hz
(selectable by volume – read, adaptive read-ahead, Non-operational Shock
30g 10ms ½ Sine
write through, write-back), battery backup
Non-operational Vibration Random 1.04 grms 2-200Hz
Disk Drives
Disk Drives Supported
Relocation Vibration
Swept Sine 0.9g 2-200Hz
Acoustics
<58 dB LpA @20°C
Seagate SATA (7.2K/750G)
Interface Types
SATA-II (3GB/s), NCQ , dedicated bandwidth to Approvals
each drive
CCC, CE, UL, cUL, RoHS (R5)
Max Drives per Enclosure 48, 512 Logical Drives/system, automatic bad Microsoft WHQL, Microsoft RAID System Submission – MPIO 2-Node Cluster
sector assignment
Warranty Information
RAID Controllers
Enclosures with drives No. RAID Controllers
2 (dual – HA)
RAID Levels Supported
Up to 96 disk arrays with independent RAID level 0, 1, 5, 6, 10, and 50 support, selectable strip sizes (64K, 128K, and 256K), partial strip read/write
Up to 3 years
Please contact Xyratex for detailed warranty information.
RAID Protection Features Background initialization, background parity checking and automatic drive rebuild with redundant RAID arrays
System Management
Software
StorView, StorView Global, StorView Path Manager
Interfaces Supported
Ethernet (out-of-band), FC host based (in-band)
System Availability
Hot Swappable
PSU/cooling modules, disk drives, RAID controllers
Components
Additional Reliability StorView Path Manager for Windows and Features
StorView Path Manager for Linux - host based dynamic multi-path failover
Dimensions
Height 175mm (6.89”) 4 EIA Units
Width
482mm (19”) 1EC Rack Compliant)
Depth
810mm (31.9”)
Weight
74.8Kg (165 lbs) with drives
USA Sales Tel: +1 877 997 2839 & Support or +1 877 XYRATEX
Call Service Fax: +1 408 894 0880
UK HQ
Tel: +44 (0)23 9249 6000
Fax: +44 (0)23 9249 2284
©2007 Xyratex (The trading name of Xyratex Technology
Limited). Registered office: Langstone Road, Havant, Hampshire,
PO9 1SA, England.
The information given in this data sheet is for marketing
purposes and is not intended to be a specification nor to provide
the basis for a warranty. The products and their details are
subject to change. For a detailed specification sheet or if you
need to meet a specific requirement, please contact Xyratex.
www.xyratex.com
Issue 2.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising