Updating EXO Handheld Firmware (v2) Quick Start

Updating EXO Handheld Firmware (v2) Quick Start
TM
Updating EXO Handheld Firmware (v2)
Quick Start Guide
Please take the following steps to update your EXO Handheld (v2) to the latest firmware package.
If you have any questions, please contact info@ysi.com for assistance.
1 Download the Handheld Updater Package from:
• YSI.com:
https://www.ysi.com/customer-support/software-firmware-downloads
• EXOwater.com:
http://www.exowater.com/manuals-software.php
the contents of the
2 Extract
downloaded zip file to a known
location on your computer.
• The following files will be present:
3 Turn on the EXO Handheld Display and Connect the Device
to Your Computer via USB Cable.
If this is the first time performing a firmware update to your handheld, install the
device driver before continuing, otherwise the updater program will not recognize your
Handheld. See the section on the next page for instructions on how to install the
Handheld driver. (NOTE: The driver only needs to be installed once per computer.)
Open the Folder where the Update Package was Extracted
4 and Open the Program ‘EXO-Handheld-Update’.
• The program will automatically scan for and update
the handheld connected to the computer like so:
• While the update is being performed, please do not
close the program, shut off your computer, disconnect the
handheld, or interact with the handheld in any way. This
process should take approximately 2 to 3 minutes.
• Once the update is finished, exit the application by clicking
the ‘Exit’ button.
• If you have started the update program prior to
connecting the handheld to the computer you may
need to click the ‘Rescan and Update’ button to
start the update.
Your device is now updated,
and ready to go!
September 2016 Rev A
YSI.com
TM
EXO Handheld (v2)
Driver Installation
If this is the first time performing a firmware update to your handheld, install the device driver before continuing, otherwise the
updater program will not recognize your Handheld. (NOTE: The driver only needs to be installed once per computer.)
If you have any questions, please contact info@ysi.com for assistance.
1 Open Device Manager
• Open the ‘Run’ dialog box. To do this, press and
hold the ‘Windows’ key, then press the ‘R’ key.
• In the ‘Run’ dialog box, type ‘devmgmt.msc’
without quotes and press the ‘OK’ button.
2 Find the Handheld in Device Manager:
3 Install the Handheld Drivers:
• Right-click on the Handheld to bring up the context
menu, and then click ‘Update Driver Software…’
4 Complete the following dialogs:
• Click ‘Next’ to install the driver.
• Click ‘Browse my computer for driver software’.
• Click ‘Browse’.
• Wait for the installation to complete, and then click ‘Close’.
The firmware updater should now recognize the EXO Handheld.
• Find and select the folder where the updater program
has been extracted to, then press ‘OK’.
September 2016 Rev A
YSI.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising