HD-DA-2-QUAD - Special
HD-DA-2-QUAD
Quad 1-to-2 HDMI® Distribution Amplifier
The HD-DA-2-QUAD is a single rack-space unit containing four
independent 1-to-2 HDMI distribution amplifiers. It is designed for
splitting up to four HDMI, DVI, or DisplayPort Multimode signals to
feed separate displays or processors, and is ideal for adding
"loop-thru" capability to the inputs of a Crestron DVPHD Digital Video
Processor. The HD-DA-2-QUAD supports HDMI with HDCP and Deep Color,
handling 1080p60 HDTV and WUXGA computer resolutions, and
multi-channel HD lossless audio.
Computer Compatibility
Besides handling every available HDTV format supported by HDMI, the
HD-DA-2-QUAD also supports computer resolutions up to 1920 x 1200
WUXGA, and is compatible with DisplayPort Multimode and DVI computer
signals using a simple adapter or dongle[1].
EDID Format Management
Embedded in the HDMI signal there is data called EDID (Extended
Display Identification Data), which is generated by a display or audio
processor to inform the upstream source about its format and
resolution capabilities. In response to this data, the source
ordinarily configures itself to send the best video resolution and
audio format that both devices can support. But when you split that
source's output to feed two disparate devices, as with the
HD-DA-2-QUAD, which device does the source listen to? And what if the
devices don't all support the same formats?
The HD-DA-2-QUAD overcomes formatting conflicts by intelligently
determining the optimal video resolution, frame rate, color depth, and
audio format that all of the devices can handle. So there's no need
to mess with individual device settings or complicated programming
— the HD-DA-2-QUAD manages it all automatically through EDID.
HDCP Key Management
By supporting HDCP, the HD-DA-2-QUAD ensures compatibility with all
current and future high-definition signals. HDCP (High-bandwidth
Digital Content Protection) is the digital rights management method
that television and movie studios use to protect their content from
unauthorized duplication. To support HDCP protected content, all
devices in the chain must be HDCP compliant.
To manage the HDCP handshaking between devices, the source device (e.
g., a Blu-ray Disc™ player or HDTV receiver) issues "keys" to the
devices downstream. Every HDMI source device has a limit to how many
downstream devices it can support, determined by the number of HDCP
keys it has available. But rarely is that limit advertised or
specified by the manufacturer or service provider, so connect too many
displays or processors and the source will simply stop outputting a
signal without warning.
To prevent such surprises, using Crestron Toolbox™ software, the
HD-DA-2-QUAD can test the HDCP limits of each HDMI source, allowing
the installer to configure the system around any limitations, or
substitute a different component.
Sync Detect LEDs
To simplify operation and troubleshooting, the HD-DA-2-QUAD provides
individual sync detection LEDs on its front panel, providing a clear
indication when a valid digital signal is connected to any input.
> Provides four independent HDMI® splitters
www.crestron.com
800.237.2041
> Enables audio "loop-thru" for DVPHD inputs
> Supports HDMI with Deep Color and 7.1 channel HD
lossless
audio
> Passes EDID, CEC, and HDCP
> Compatible with DVI and DisplayPort Multimode[1]
> Supports video resolutions up to WUXGA 1920x1200 and
HD
1080p60
> Includes front panel input sync LEDs
> Manages HDCP digital rights management for connected
devices
> Performs automatic AV signal format management via
EDID
> Single-space 19-inch rack-mountable
> Includes external power supply
> No programming or control system required
SPECIFICATIONS
Video
Input Signal Types: HDMI, DVI[1], DisplayPort Multimode[1]
Output Signal Types: HDMI, DVI[1]
Formats: HDMI w/Deep Color, DVI, HDCP content protection support
Input Resolutions, Progressive: 640x480@60Hz, 720x480@60Hz (480p),
720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz,
854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz,
1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz,
1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz,
1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz,
1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz,
1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25),
1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60),
1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other
resolution allowed by HDMI up to 165MHz pixel clock
Input Resolutions, Interlaced: 720x480@30Hz (480i), 720x576@25Hz (576i),
1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other
HD-DA-2-QUAD Quad 1-to-2 HDMI® Distribution Amplifier
Output Resolutions: Matched to inputs
HD-DA-2-QUAD: Quad 2-to-1 HDMI® Distribution Amplifier
Audio
Input Signal Types: HDMI, DisplayPort Multimode[1]
Output Signal Types: HDMI
Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby®
TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master
Audio™, Up to 8ch PCM
Communications
USB: For console, USB 1.1 client
HDMI: Passes CEC, provides EDID and HDCP key management
Connectors
IN 1 - 4: (4) 19-pin Type A HDMI female;
HDMI digital video/audio inputs;
Also supports DVI and DisplayPort Multimode[1]
OUT 1 - 4: (8) 19-pin Type A HDMI female;
HDMI digital video/audio outputs;
Also supports DVI[1]
COMPUTER: (1) USB Type B female;
USB 1.1 computer console port (6 ft cable included)
PWR: (1) 2-pin 3.5mm detachable terminal block;
Alternate 24 Volt DC power input for connection to a Cresnet® power supply
24VDC 1.0A: (1) 2.1mm barrel DC power jack;
24 Volt DC power input;
PW-2420RU power supply included
G: (1) 6-32 screw, chassis ground lug
Indicators
PWR: (1) green LED, indicates 24 Volts DC power supplied from Cresnet
control network or power pack
SYNC DETECT: (4) red LEDs, indicate input signal sensing
Included Accessories
PW-2420RU Power Pack, Desktop, 24VDC, 2A (50 Watts), Regulated, US/
International [Included Quantity: 1]
Available Accessories
CBL-HD-1.5: Crestron® Certified HDMI® Interface Cable, 1.5 ft
CBL-HD-3: Crestron® Certified HDMI® Interface Cable, 3 ft
CBL-HD-6: Crestron® Certified HDMI® Interface Cable, 6 ft
CBL-HD-12: Crestron® Certified HDMI® Interface Cable, 12 ft
CBL-HD-20: Crestron® Certified HDMI® Interface Cable, 20 ft
CBL-HD-30: Crestron® Certified HDMI® Interface Cable, 30 ft
CBL-HD-DVI-1.5: Crestron® Certified HDMI® to DVI Interface Cable, 1.5 ft
CBL-HD-DVI-3: Crestron® Certified HDMI® to DVI Interface Cable, 3 ft
CBL-HD-DVI-6: Crestron® Certified HDMI® to DVI Interface Cable, 6 ft
CBL-HD-DVI-12: Crestron® Certified HDMI® to DVI Interface Cable, 12 ft
CBL-HD-DVI-20: Crestron® Certified HDMI® to DVI Interface Cable, 20 ft
CBL-HD-DVI-30: Crestron® Certified HDMI® to DVI Interface Cable, 30 ft
CBL-DP-HD-1.5: Crestron® Certified DisplayPort to HDMI® Interface Cable,
1.5 ft
CBL-DP-HD-3: Crestron® Certified DisplayPort to HDMI® Interface Cable, 3
ft
CBL-DP-HD-6: Crestron® Certified DisplayPort to HDMI® Interface Cable, 6
ft
CBL-DP-HD-12: Crestron® Certified DisplayPort to HDMI® Interface Cable,
12 ft
CBL-DP-HD-20: Crestron® Certified DisplayPort to HDMI® Interface Cable,
20 ft
CBL-DP-HD-30: Crestron® Certified DisplayPort to HDMI® Interface Cable,
30 ft
Power Requirements
Power Pack: 1 Amp @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included
Cresnet Power Usage: 27 Watts (1.13 Amps @ 24 Volts DC)
Note: May be powered by 24V DC power pack or Cresnet network power, not
both.
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 92 BTU/Hr
Enclosure
Chassis: Metal, black finish, convection-cooled, vented top and sides
Faceplate: Extruded aluminum, black matte finish with polycarbonate label
overlay
Mounting: Freestanding or 1U 19-inch rack-mountable (adhesive feet and
rack ears included)
Dimensions
Height: 1.80 in (46 mm);
1.70 in (44 mm) without feet
Width: 17.03 in (433 mm);
19.0 in (483 mm) with ears
Depth: 10.04 in (255 mm)
Weight
4.1 lb (1.9 kg)
Available Models
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
Notes:
1. HDMI IN requires an appropriate adapter or interface cable to
accommodate a DVI or DisplayPort Multimode signal. HDMI OUT requires an
appropriate adapter or interface cable to accommodate a DVI signal.
CBL-HD-DVI and CBL-DP-HD interface cables available separately.
This product may be purchased from an authorized Crestron dealer. To find a
dealer, please contact the Crestron sales representative for your area. A
list of sales representatives is available online at www.crestron.
com/salesreps or by calling 800-237-2041.
Crestron, Cresnet, and Crestron Toolbox are trademarks or registered
trademark of Crestron Electronics, Inc. Blu-ray Disc is a trademark of the
Blu-ray Disc Association. Dolby, Dolby Digital, and the double-D symbol
are trademarks or registered trademarks of Dolby Laboratories. DTS is a
registered trademark & the DTS logos and Symbol are trademarks of DTS, Inc.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries. Other trademarks and trade names may be used
in this document to refer to either the entities claiming the marks and
names or their products. Crestron disclaims proprietary interest in the
marks and names of others.
HD-DA-2-QUAD Quad 1-to-2 HDMI® Distribution Amplifier
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
All brand names, product names and trademarks are the property of their respective owners.
©2011 Crestron Electronics, Inc.
Specifications subject to change without notice. 3/18/2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising