HDMI Super Booster Plus
HDMI Super Booster Plus
USER
MANUAL
www.gefen.com
HDMI Super Booster Plus
USER
MANUAL
www.gefen.com
ASKING FOR ASSISTANCE
Technical Support:
Telephone
(818) 772-9100
(800) 545-6900
Fax
(818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
support@gefen.com
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
The HDMI Super Booster Plus is a trademark of Gefen Inc.
© 2008 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE
Technical Support:
Telephone
(818) 772-9100
(800) 545-6900
Fax
(818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
support@gefen.com
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
The HDMI Super Booster Plus is a trademark of Gefen Inc.
© 2008 Gefen Inc., All Rights Reserved
TABLE OF CONTENTS
1
Introduction
2
Features
3
Panel Descriptions
4
Connecting and Operating the HDMI Super Booster Plus
5
Auto Equalization
6
Specifications
7
Warranty
TABLE OF CONTENTS
1
Introduction
2
Features
3
Panel Descriptions
4
Connecting and Operating the HDMI Super Booster Plus
5
Auto Equalization
6
Specifications
7
Warranty
INTRODUCTION
The Gefen HDMI Super Booster Plus is an attractive alternative to the traditional
sender/receiver solutions for HD extension. The HDMI Super Booster Plus enables
your standard “off the shelf” HDMI cable to transmit HDTV video plus multichannel
digital audio in a single cable way beyond the limited HDMI specification of 15-feet.
Up to 200 feet can be easily traversed using your HDMI cable plus a HDMI Super
Booster Plus. The HDMI Super Booster Plus corrects any digital degradation that
occurs when HDMI is used to send digital audio/video signals beyond the HDMI
specification of 15 feet.
How It Works
This plug and play installation takes mere seconds. You simply connect the HDMI
cable on one side of the HDMI Super Booster Plus and the display’s cable on the
other side. The HDMI Super Booster Plus sits between the end of your HDMI cable
and your display. You also have the option of connecting another HDMI cable to the
Booster, daisy chaining Boosters and cables for greater distances.
1
INTRODUCTION
The Gefen HDMI Super Booster Plus is an attractive alternative to the traditional
sender/receiver solutions for HD extension. The HDMI Super Booster Plus enables
your standard “off the shelf” HDMI cable to transmit HDTV video plus multichannel
digital audio in a single cable way beyond the limited HDMI specification of 15-feet.
Up to 200 feet can be easily traversed using your HDMI cable plus a HDMI Super
Booster Plus. The HDMI Super Booster Plus corrects any digital degradation that
occurs when HDMI is used to send digital audio/video signals beyond the HDMI
specification of 15 feet.
How It Works
This plug and play installation takes mere seconds. You simply connect the HDMI
cable on one side of the HDMI Super Booster Plus and the display’s cable on the
other side. The HDMI Super Booster Plus sits between the end of your HDMI cable
and your display. You also have the option of connecting another HDMI cable to the
Booster, daisy chaining Boosters and cables for greater distances.
1
FEATURES
Features
• Perfect digital high definition video sent over long stretches of HDMI cables
• Locate an HDMI display up to 200 feet away from any HDTV source
• Supports resolutions up to 1080p, 2K, and 1920 x 1200
• HDMI/HDCP compliant
Includes:
(1) HDMI Super Booster Plus
(1) 5V DC Power Supply
(1) User’s Manual
2
FEATURES
Features
• Perfect digital high definition video sent over long stretches of HDMI cables
• Locate an HDMI display up to 200 feet away from any HDTV source
• Supports resolutions up to 1080p, 2K, and 1920 x 1200
• HDMI/HDCP compliant
Includes:
(1) HDMI Super Booster Plus
(1) 5V DC Power Supply
(1) User’s Manual
2
PANEL LAYOUT
Front Panel
Power LED
Indicator
Manual EQ
Adjustment
HDMI In
Back Panel
+5V DC In
HDMI Out
3
PANEL LAYOUT
Front Panel
Power LED
Indicator
Manual EQ
Adjustment
HDMI In
Back Panel
+5V DC In
HDMI Out
3
CONNECTING AND OPERATING THE
HDMI SUPER BOOSTER PLUS
1.
Connect the long HDMI cable from the source into the “HDMI In” on the front of
the HDMI Super Booster Plus. The HDMI Super Booster Plus is placed next to
your display to regenerate the HDMI cable.
2.
Connect a short HDMI cable from the “HDMI Out” connection in the back of the
HDMI Super Booster Plus to your display or projector
3.
Plug the 5V DC power supply into the HDMI Super Booster Plus.
4.
Plug the 5VDC wall mount power supply into the wall outlet.
5.
Adjust the trim pot on the front of the unit to tune the signal and eliminate any
video noise.
Note: Instead of manually adjusting the EQ to reduce image noise, the HDMI
Super Booster Plus has the ability to do auto equalization. To enable the Auto
EQ, remove the silver sticker on the bottom of the unit to reveal the service dip
switch. By default, the switches should both be in the OFF position. Flip dip
switch 1 to the ON position to enable Auto EQ. If the image is degraded or has
any video noise in this mode, please disable the Auto EQ and adjust the image
manually.
4
CONNECTING AND OPERATING THE
HDMI SUPER BOOSTER PLUS
1.
Connect the long HDMI cable from the source into the “HDMI In” on the front of
the HDMI Super Booster Plus. The HDMI Super Booster Plus is placed next to
your display to regenerate the HDMI cable.
2.
Connect a short HDMI cable from the “HDMI Out” connection in the back of the
HDMI Super Booster Plus to your display or projector
3.
Plug the 5V DC power supply into the HDMI Super Booster Plus.
4.
Plug the 5VDC wall mount power supply into the wall outlet.
5.
Adjust the trim pot on the front of the unit to tune the signal and eliminate any
video noise.
Note: Instead of manually adjusting the EQ to reduce image noise, the HDMI
Super Booster Plus has the ability to do auto equalization. To enable the Auto
EQ, remove the silver sticker on the bottom of the unit to reveal the service dip
switch. By default, the switches should both be in the OFF position. Flip dip
switch 1 to the ON position to enable Auto EQ. If the image is degraded or has
any video noise in this mode, please disable the Auto EQ and adjust the image
manually.
4
AUTO EQUALIZATION
ON
Auto EQ OFF
(Default)
1
2
ON
Auto EQ ON
1
2
Remove the silver
tape to expose the
Dip Switch Bank
By default, both Dip Switches should be in the off position as shown above. To
enable the Auto EQ, please flip Dip Switch 1 to the ON position. You must then
proceed to manually adjust the EQ by turning the EQ trim pot on the front of the unit
in small increments. It is important to turn the dial in very small increments as the
“sweet spot” at which all video noise is eliminated can be very small.
5
AUTO EQUALIZATION
ON
Auto EQ OFF
(Default)
1
2
ON
Auto EQ ON
1
2
Remove the silver
tape to expose the
Dip Switch Bank
By default, both Dip Switches should be in the off position as shown above. To
enable the Auto EQ, please flip Dip Switch 1 to the ON position. You must then
proceed to manually adjust the EQ by turning the EQ trim pot on the front of the unit
in small increments. It is important to turn the dial in very small increments as the
“sweet spot” at which all video noise is eliminated can be very small.
5
SPECIFICATIONS
Video Amplifier Bandwidth ............................................................................ 165 MHz
Input Video Signal ....................................................................................1.2 Volts p-p
Input DDC Signal ............................................................................. 5 Volts p-p (TTL)
Maximum Single Link Range ....................................................... 1920 x 1200 x 60hz
HDMI Input/Output Connector Type ....................................................... HDMI Type A
Power Consumption ............................................................................. 5 Watts (max)
Power Supply…………………….. .................................................................... 5V DC
Dimensions .............................................................................. 1.75”W x 1”H x 2.25”D
Shipping Weight ................................................................................................. 2 Lbs
6
SPECIFICATIONS
Video Amplifier Bandwidth ............................................................................ 165 MHz
Input Video Signal ....................................................................................1.2 Volts p-p
Input DDC Signal ............................................................................. 5 Volts p-p (TTL)
Maximum Single Link Range ....................................................... 1920 x 1200 x 60hz
HDMI Input/Output Connector Type ....................................................... HDMI Type A
Power Consumption ............................................................................. 5 Watts (max)
Power Supply…………………….. .................................................................... 5V DC
Dimensions .............................................................................. 1.75”W x 1”H x 2.25”D
Shipping Weight ................................................................................................. 2 Lbs
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising