long range slim array speakers ha-1010-as ha

long range slim array speakers ha-1010-as ha
Wiring diagram HA-1010-AM
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
INSTRUCTION MANUAL
8Ω
LONG RANGE
SLIM ARRAY SPEAKERS
16Ω
200Ω
BLUE
100Ω
0
BLACK
COM
WHITE
Thank you for purcahsing TOA’s LONG RANGE SLIM ARRAY SPEAKERS.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
5. SPECIFICATIONS
Model
HA-1010-AS HA-1010-EA HA-1010-EB
Rated Input
Rated Impedance
HA-1010-AS
HA-1010-AM
HA-1010-EA
HA-1010-EB
HA-1010-AM
50W
100V line: 200Ω (50W), 330Ω (30W)
70V line: 100Ω (50W), 200Ω (25W)
25V line: 100Ω (6W), 200Ω (3W)
Sound Pressure Level
114dB (1W, 1m)
Maximum Sound Pressure Level
131dB (50W, 1m)
Frequency Response
350Hz − 7kHz
Directivity Angle
Horizontal: 90˚ (2kHz), Vertical: 15˚ (2kHz)
Speaker Component
Horn speaker unit x 8
Operating Temperature
-20˚C to +55˚C (-4˚F to +131˚F)
Water Protection
IPX5
Finish
Case, Panel: Aluminum, salt-resistant, paint, grey
Front grille: Aluminum, black
Bracket: Stainless steel (SUS 304), paint, grey
Dimensions
167(w) x 1233(h) x 140.5(d) mm (6.57” x 48.54” x 5.53”)
Weight
1. SAFETY PRECAUTIONS
13.5kg (29.76lb)
Note
• Be sure to read the instruction manual in this section
carefully before use.
• Make sure to observe the instruction in this manual as the
convention of safety symbols and messages regarded as
very important precautions are included.
• We also recommend you keep this instruction manual
handy for future reference.
• The design and specifications are subject to change without notice for improvement.
• Accessories
Mounting Bracket ........................................
Hexagonal Bolt (M8 x 20) ...........................
Washer (M8) ...............................................
Spring Washer (M8) ....................................
Washer (M10) .............................................
Spring Washer (M10) ..................................
Nut (M10) ....................................................
2
2
4
2
8
4
4
WARNING
Indicates a potentially hazardous situation which, if
mishandled, could result in death or serious
personal injury.
When Installing the Unit
• Install the speaker only in a location that can structurally
support the weight of the speaker and the mounting
bracket. Doing otherwise may result in the unit falling
down and causing personal injury and/or property
damage.
URL : http://www.toa.com.sg/
CAUTION
Indicates a potentially hazardous situation which, if
mishandled, could result in moderate or minor
personal injury, and/or property damage.
When Installing the Unit
• Do not place heavy object on the speaker as this may
cause it to fall or break which may result in personal injury
and/or property damage. In addition, the object itself may
fall off and cause injury and/or damage.
• Do not stand or sit on, nor hang down from the speaker as
this may cause it to fall down or drop, resulting in personal
injury and/or property damage.
• Do not operate the speaker for an extend period of time
with the sound distorting. Doing so may cause the
connected speakers to heat, resulting in a fire.
Step 3. Install the long range slim array to the bracket
2. FEATURES
that have been installed to the mounting surface
using supplied hexagon bolt, washer, and spring
washer to top and bottom bracket.
The HA-1010 is long range speaker slim array is composed of multiple horn speaker positioned in an array. It features
long-range sound coverage further than conventional horn speakers, narrowly focused vertical directivity that allows
excessive volume to be controlled at closer proximity, and form a continuous linear sound source, achieving uniform sound
pressure with less attenuation due to distance.
Top bracket
3. INSTALLATION PRECAUTIONS
• This long range slim array speakers have
feature a drain hole built into same panel
that holds the speaker cord. For proper
drainage, when installation please ensure
that this panel faces down toward the
ground or follow the instruction of direction
label at the rear case.
• When using the other bracket, please to use
TOA’s optional bracket solely designed for
mounting this speaker or it must have
strength enough to stand the speaker
weight.
Hexagon bolt M8 x 20
Spring washer (for M8)
Washer (for M8)
Drain hole
MAKE SURE THAT SPEAKER IS MOUNTED
WITH THE SIDE INDICATED BY THE ARROW UP.
IF THE SPEAKER MOUNTED UPSIDE DOWN.
RAINWATER GETS INTO THE SPEAKER FROM
DRAIN HOLE ON THE BOTTOM PLATE.
CAUSING BREAKDOWNS OR ACCIDENTS.
Case
WHEN MOUNTING. BE SURE TO USE TOA’S
OPTIONAL BRACKET SOLELY DESIGNED FOR
MOUNTING THIS SPEAKER. WHEN USING
OTHER BRACKET. IT MUST HAVE STRENGTH
ENOUGH TO STAND THE SPEAKER WEIGHT.
Washer (for M8)
Spring washer (for M8)
Hexagon bolt M8 x 20
HA-1010
Speaker cord
Bottom bracket
3. INSTALLATION
50
Step 1. Make the sign for drill guide at the surface or
Mounting Bracket
(accessory)
25(0.98”)
Guide for
top bracket
Note
When the speaker installation need slope angel, use the
optional Q-HA-1100 speaker bracket.
4. SPEAKER CORD COLOR CODING
1287 (50.67”)
Holes bracket
4 - Ø9
Unit: mm (in)
(1.97”)
HA-1010-AM
Surface for drill
Line voltage
Guide for
bottom bracket
25 (0.98”)
location that can structurally support the weight
of the speaker. Prepare the proper dyna bolt
that suitable with hole of bracket. Dimensions
of sign for drill guide and hole of bracket as
shown in the picture.
25V LINE
70V LINE
Rated input
50W
25W
6W
3W
Impedance
100Ω
200Ω
100Ω
200Ω
HOT
BLACK
BLUE
BLACK
BLUE
COM
WHITE
WHITE
WHITE
WHITE
Cord color coding
HA-1010-AS, HA-1010-EA, HA-1010-EB
50
Speaker cord
For connections,
refer to the table.
(1.97”)
Step 2. Drill the surface that have been marked, install
the proper dyna bolt then the both of top and
bottom bracket.
100V LINE
Rated input
50W
30W
Impedance
200Ω
330Ω
HOT
BLACK
BLUE
COM
WHITE
WHITE
Cord color coding
5. WIRING DIAGRAM
Note
Line voltage
Dyna bolts and nuts are not provided.
Wiring diagram HA-1010-AS, HA-1010-EA, HA-1010-EB
Mounting surface
8Ω
8Ω
8Ω
8Ω
Nut
Mounting Bracket
(accessory)
16Ω
330Ω
200Ω
Dyna bolt
0
COM
BLUE
BLACK
WHITE
8Ω
8Ω
8Ω
8Ω
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising