Camera Mount Camera Mount
Your camera mount installation is complete! For pre-flight
configuration information, please visit:
www.copter.ardupilot.com/APMcopter. Happy flying!
ADD- ON S
Available at Store.3DRobotics.com
3DR Radio Telemetry Kit
915 Mhz (US)
$85.99
Camera
Mount
Micro Compact Super Vision
CCD Camera
$139.99
Wireless Video Transmitter Kit
5.8 Ghz
$189.99
I N S TA L L AT I O N G U I D E
3
Your camera mount installation is complete! For pre-flight
configuration information, please visit:
www.copter.ardupilot.com/APMcopter Happy flying!
ADD- ON S
Available at Store.3DRobotics.com
3DR Radio Telemetry Kit
915 Mhz (US)
$85.99
Camera
Mount
Micro Compact Super Vision
CCD Camera
$139.99
Wireless Video Transmitter Kit
5.8 Ghz
$189.99
I N S TA L L AT I O N G U I D E
3
Thank you for purchasing a camera mount for your 3DR Copter!
Your pitch-stabilized camera mount comes fully assembled. These
steps will guide you through installing the mount onto your copter.
You will need a 5.5 mm (7/32) wrench.
1
Prepare bolts
Camera mount attaching to
copter (side view)
On the underside of your copter, locate the two bolts with
C-shaped washers.
Add C-shaped washers onto bolts after camera mount as shown
above.
3
Secure in place
Add security nuts and fasten tightly using wrench.
3DR Copter (underside)
Remove nuts and washers. This is where we’ll attach the camera
mount.
2
Attach mount
Completed camera mount
installation (underside)
Place camera mount onto exposed bolts using the holes in the
top of the mount.
2
1
Thank you for purchasing a camera mount for your 3DR Copter!
Your pitch-stabilized camera mount comes fully assembled. These
steps will guide you through installing the mount onto your copter.
You will need a 5.5 mm (7/32) wrench.
1
Prepare bolts
Camera mount attaching to
copter (side view)
On the underside of your copter, locate the two bolts with
C-shaped washers.
Add C-shaped washers onto bolts after camera mount as shown
above.
3
Secure in place
Add security nuts and fasten tightly using wrench.
3DR Copter (underside)
Remove nuts and washers. This is where we’ll attach the camera
mount.
2
Attach mount
Completed camera mount
installation (underside)
Place camera mount onto exposed bolts using the holes in the
top of the mount.
1
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising