Antenna Questionnaire - Haigh-Farr

Antenna Questionnaire - Haigh-Farr
ANTENNA
QUESTIONNAIRE
Because every antenna has special mechanical and environmental considerations, we have provided this questionnaire to assist us in
better understanding your specific antenna needs. Please fill out with all of the applicable information you can provide, and send directly
to Haigh-Farr.
Type of Antenna:
‰ Wraparound™
‰ Omnislot™
‰ Flexislot™
‰ Blade
‰ Button
‰ Conformal
‰ Other
Type of Vehicle:
Program Name:
Production Article Delivery:
First Article Delivery:
Quantity:
Describe the Application (if multi-band, check all that apply, and please include information for each channel below)
‰ Flight Termination
‰ GPS
ELECTRICAL INFORMATION:
‰ Telemetry
‰ Transponder
BAND 1
‰ Other/Additional Info:
BAND 2
BAND 3
BAND 4
BAND 5
Frequency (MHz)
Bandwidth (MHz)
Average Power Output (W)
Peak Power Output (W)
Polarization
Gain (dBi)
Beam Coverage Desired:
‰ Omnidirectional
‰ Hemispherical
‰ Beam (specify Beamwidth)
Antenna Connector or Direct Cable Feed: ‰ Connector type?
‰ Direct cable feed
Other Additional Information:
Mechanical Information
Vehicle shape (attach sketch, drawings, or model if possible):
Shape of the mounting surface:
‰ Flat
‰ Cylindrical
Type of mounting to vehicle:
‰ Flush
‰ Exterior
‰ Conical
‰ Conformal
‰ Other/Additional Information:
Where will the antenna be mounted (e.g. nose, tail, etc.):
Area Available for the Antenna
For cylindrical/conical surfaces: Circumferential Length:
For flat surfaces: Length:
HF Antenna Questionnaire Rev. A
Width:
Axial Length:
Thickness:
Thickness:
Haigh-Farr, Inc. 43 Harvey Road, Bedford NH 03110
Tel: 603-644-6170 Fax: 603-644-6190
E-mail: sales@haigh-farr.com Web Site: www.haigh-farr.com
HAIGH-FARR
Method of attachment to vehicle:
‰ Screw
‰ Adhesive
‰ Other:
Will anything cover any part of the antenna’s outer surface, such as a fin, ablative surface, or cable channel? If yes, please specify what
and where:
Environmental Specification Information:
Temperature range/profile soak:
Aero heating:
Mach number or speed:
Flight duration:
Shock & vibration parameters:
Other requirements:
Additional Information (attach any sketches or drawings)
Formal tests required (check all that apply)
‰ ATP
‰ Qualification
Testing parameters:
(check all that apply)
‰ Thermal Cycling
‰ Bench Shock
‰ Protoqual
‰ Vibration
‰ VSWR
‰ First Article
‰ Humidity
‰ Salt Fog
‰ Antenna Patterns
‰ Shock
‰ Pyro-shock
Simulation Requirements:
Your Information
Name:
Title:
DESIGN CAPABILITY
Email Address:
Company:
Division:
Address:
With over 40 years of antenna design, your antenna
configuration/performance requirements may already exist,
or extrapolations from similar Haigh-Farr designs may be
possible with minimal effort. If a design meeting your
requirements does not exist, Haigh-Farr has the experience
and simulation capability to customize a solution. Contact
Haigh-Farr for a review of your antenna requirements.
Office Phone Number:
Fax Number:
Submit Via Email
Best method to contact:
HF Antenna Questionnaire Rev. A
Haigh-Farr, Inc. 43 Harvey Road, Bedford NH 03110
Tel: 603-644-6170 Fax: 603-644-6190
E-mail: sales@haigh-farr.com Web Site: www.haigh-farr.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising