Basic Instructions for how to connect a laptop to the AV Equipment in the Dean's Conference Room, CSWR Conference Room, DiNitto Center, and Classroom 2.140 Equipment: Laptop with VGA port ! Most PC laptops have a VGA port ! but some netbooks do not. ! ! ! Apple laptops need a special VGA adaptor. (Purchase at Campus Computer store, not provided) Cable (provided) ! Attached to wall: VGA cable to ! 'computer' port and audio cable to ! 'Audio' port on the wall. ! ! ! ! Projector Control: On: Press and hold 'On' for 10 seconds. Projector will turn on and screen will drop. Off: Press and hold 'Off' for 10 seconds. Projector will turn off and screen will ascend. Press 'Laptop' if not selected. Attached to laptop: VGA cable to!VGA port or adaptor. Audio cable to headphone jack (if sound required). Laptop Control: On PC: If screen is not being projected, press function key and 'F8' to toggle screen. On Mac: If screen is not being projected, select 'Displays' in your System Preferences. Sound Control: There are three possible sound control sources. First, make sure that volume is up in the operating system. Second, the program that you are using on the laptop may have a volume control. Third adjust volume on the wall system by pressing the 'VOL+' and 'VOL-' buttons. !
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project