Bluetooth Module

Bluetooth Module
Bluetooth Module
(RLVBBT01)
The VBOX Bluetooth Module (RLVBBT01) is a general purpose
Bluetooth adapter, designed as an alternative to using a hardwired serial connection between the VBOX and either a Q4
tablet (recommended) or a Laptop PC equipped with a
Bluetooth interface.
The RLVBBT01 module allows the user to place the VBOX in a
safe, dry and convenient location, facilitating the free use of
the Q4 display, either by hand or mounted, without any
cabling restrictions.
The RLVBBT01 offers high speed serial communications at
115K baud rate, ensuring full data capture and transfer. It has
minimal power consumption, resulting in insignificant drain on
the VBOX power source – particularly useful when using a
VBOX battery pack, in addition to 13 standard GPS channels.
Features

Bluetooth v1.2

Low Current Consumption

Wireless Data Communications

Compact Construction

Fast Baud Data Throughput

Lightweight

External Antenna

IP30 Rated

Up to 30m Range

Oct 2011
3 x LED’s for Operational Status Indication
August 2011
20/05/2013
Bluetooth Module
(RLVBBT01)
Specification
Input Voltage
8-30VDC
Current Consumption
35mA typical; 90mA peak
VBOX Connection
2 x 5-way LEMO
Range
30m Line of sight
Baud rate
115k
External antenna
2.4GHz 50Ω (supplied) via SMA connector
Environmental and Physical
RF Frequency
2400 – 2483.5 MHz
Temperature (Operating)
-20°C to +60°C
Temperature (Storage)
-40°C to +85°C
Enclosure
Milled Aluminium
Height
33mm
Width
60mm
Depth
112mm (including SMA antenna connector)
Weight
240g
Ingress Protection Rating
IP30
Connector Pinout for both Lemo connectors
Pin
I /O
Description
Range
1
O
RS232 Rx
±12V
2
I
RS232 Tx
±12V
3
-
NC
4
-
NC
5
I
+V Power
Chassis
I
Ground
8 – 30VDC
August 2011
Oct 2011
20/05/2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising