waves-12 - MRO-TEK
WAVES-12
Managed Last mile Access Rack
WAVES-12
WAVES-12 is a carrier-class Managed Multi-Service Access Platform, designed to enable complete service integration for Last Mile. With a high cross
connect matrix of 1008*1008 VC-12 or 16*16 VC-4, WAVES-12 provides access to legacy TDM based services as well as broadband IP based data services over
Copper & Fiber transmission media.
WAVES-12 provides support for multi-rates starting from 64Kbps-2.3Mbps on SHDSL technology, 128Kbps-45.6Mbps on SHDSL.bis technology and
provides higher data-rates and multi-service with its Optical Multiplexing & Ethernet over SDH (EoS) tributary modules. The services can be aggregated to
either STM-1/STM-4 for an SDH uplink or Fast Ethernet/Gigabit Ethernet to support migration to NGN-IP based networks.
The 6U high chassis consists of 15 slots with 2 slots for dual-redundant hot swappable power supply modules, one Network Management module to provide inband & out of band management options with Console access, TELNET, SNMP & LITEVIEW NMS application. The remaining 12 slots can be used to populate
the aggregation cards and the tributary cards.
Key Features
Provides upto four STM-1or two STM-4 interfaces for aggregation
Provides non-blocking cross connection of 16×16 VC4 or 1008×1008
Vc12
Provides Gigabit Ethernet aggregation for integration to next generation
l
networks
Chassis comprises of 15 slots which includes two power supply slots, one
l
controller slots and 12 slots for aggregation/tributary modules.
Multiple Clocking options
l
Comprehensive diagnostics facility with loopback options
l
Input Power (dual supply) : -36V ~ -72V DC or 90V ~ 265V AC
l
l
l
Management
Powerful SNMP management system: Provides configuration,
diagnostics & monitoring options
Provides centralized control of WAVES-12 and its remote
l
CPEs (WITE LITE, ECAT) in the network, including
interface configuration, connection setup, alarm and monitoring
Direct 10/100BaseT Ethernet connection enables real-time
l
management of central and remote sites
Supports In-band management with DCC
l
Supports online upgrade of controller and tributary modules
l
l
RackSpecifications
Features
Rack
WAVES-12 modular chassis
Height
: 6U
Number of slots
: 15
Power supply
: Two hot-swappable AC or DC
Input power supply voltage : DC : -36V ~ -72V
Short circuit protection
: Yes
Rated current
: 20A
Over current protection
: 30A
Noise
: < 100mV p-p
NMS agent module
: 1 (Slot 0)
Aggregation module
: 2 (Slots 6,7)
I/O modules
: 10 (Slots 1,2,3,4,5,8,9,10,11,12)
l
Features of NMS module
Powerful SNMP management system, provides configuration,
diagnostic & monitoring
Provides clock for the whole WAVES-12 system
l
Supports on-line upgrade of system and tributary board.
l
Provides centralized control of all WAVES-12 remote
l
modems (WITE LITE, ECAT) in the network, including
interface configuration, connection setup, alarm and monitoring
Direct 10/100BaseT Ethernet connection enables real-time
l
management of central and remote sites
New software version can be downloaded onto the management
l
unit via LAN by TFTP
l
Port specification (NMS-1 module)
Console
: RJ45
ETH (for SNMP and Telnet) : RJ45
Power consumption
: < 300W (at max load)
l
l
Environment of operation :
Operating temperature
: -5 ~ 50 degree Centigrade
Humidity
: 5 ~ 90% non-condensing
Storage temperature
: -40 ~ 85 degree Centigrade
Humidity
: 20 ~ 90% non-condensing
l
Dimensions (W x H x D)
Weight
l
l
: 480 x 267 x 248 mm
: < 7 Kg (with dual power supply)
NMS module specifications
Console Interface
Connector type
: RJ45
Standard
: Complies with RS232 standard
Bit rate
: 9600bps
SNMP and NM-EXT Interface:
l
Connector type
: RJ45
Standard
: 10/100Base-T,
10/100Mbps Auto-negotiation
l
2Mbit/s Synchronous Clock Interface:
Bit rate
: 2048Kb/s±50ppm
Code
: HDB3
Impedance of interface
: 75Ù (unbalanced)
Electrical characteristics
: Complies with ITU-T G.703
Frame structure
: Complies with ITU-T G.704
Jitter tolerance
: Complies with ITU-T G.823
l
RS232 Interface for User:
Connector type
: RJ45
Standard
: Complies with RS232 standard
Bit rate
: 9600bps
l
Features of STM-1 Aggregation Unit
STM-1 aggregation module for WAVES-12
Provides two STM-1 optical interfaces with options of either two
individual paths or 1+1 path protection
Embedded cross module of 16x16 VC4, supports TU12, TU3 and
l
VC4 cross-connection capability
Supports on-line software upgrade of local and remote equipment
l
l
l
Technical Specifications
STM-1 Optical Interface
Bit rate
Line Code
Multiplexing structure
Clock characteristics
Electrical characteristics
Jitter tolerance
Optical interface type
l
:
:
:
:
:
:
:
155 Mbps
NRZ
Complies with ITU-T G.707
Complies with ITU-T G.813
Complies with ITU-T G.957
Complies with ITU-T G.823, G.825
SC connector
STM-4 Aggregation Module
STM-4 aggregation module for WAVES-12
Provides two STM-4 optical interfaces with 1+1 path protection
Supports VC-12/VC-4 mixed cross-connection capability
l
Embedded cross module of 1008x1008 VC4 , supports TU12, TU3
l
and VC4 cross-connection capability
Supports on-line software upgrade of local and remote equipment
l
l
l
Technical Specifications
STM-4 Optical Interface
Bit rate
Line Code
Multiplexing structure
Clock characteristics
Electrical characteristics
Jitter tolerance
Optical interface type
l
:
:
:
:
:
:
:
622 Mbps
NRZ
Complies with ITU-T G.707
Complies with ITU-T G.813
Complies with ITU-T G.957
Complies with ITU-T G.823, G.825
SC connector
Features of 2GE Aggregation Unit
2GE aggregation module for WAVES-12
Provides two Gigabit Ethernet ports
Supports both optical and Electrical GE interfaces
l
Aggregates Ethernet Traffic in WAVES-12 to a GbE uplink for
l
migration to PSN
Supports on-line software upgrade of local and remote equipment
l
l
l
Technical Specifications
Interface
: 2 10/100/1000Base-T Electrical ports
(RJ-45 connectors) & Optical 1000-X
(SFP interface)
LED indicators
: Power, System status,
Ethernet Link, Activity, Speed & Duplex
l
l
Environment of operation :
Operating temperature
l
: -5 ~ 50 degree Centigrade
Application
PIXIE
LITEVIEW NMS
ETH
SHDSL.bis
E1s
LAN
(Bridging/Routing)
WITELITE -2W
SHDSL
TEKLINK-16
PBX
E1 /
V35 /
ETH
Router
LAN
WAVES-12
WITELITE -4W
ETH
SHDSL.bis
STM-1
RING
LAN
ECAT Family
E1s
PDH
3rd
LAN
Party ADM
MAPLE-13
SDH
TEKLINK
E1s
LAN
ETH (EOS)
N X E1s
FXS
RS232/
V24
V35/
ETH
FXO/
E&M/
E1s
Features of DS0 Tributary Module
DS0 cross connection module for WAVES-12
Supports 1536x1536 64K (equal to 48x48 lines E1) cross capacity
Supports cross-connect for 64K services
l
Supports VC-12/VC-4 mixed cross-connection capability
l
Supports on-line software upgrade of local and remote equipment
l
l
l
Technical Specifications
Supports framed or unframed mode
Supports PCM30 (G732S) & PCM31 (G732N)
Supports master & slave clock (clock recovery from any of 48 E1 lines)
l
l
l
Features of STM-1 Tributary Module
STM-1 tributary module for WAVES-12
Supports Dual STM1 optical interfaces for 1+1 protection
Each service timeslot can access SDH network through the
l
SDH aggregate unit of WAVES-12
Supports Cross-Connecttion to SDH aggregation module (STM-1/STM-4)
l
Supports VC-12 mixed cross-connection capability
l
Supports Cross-Connect Capacity of 63 VC12
l
l
l
Technical Specifications
STM-1 Optical Interface
Bit rate
Line Code
Multiplexing structure
Clock characteristics
Electrical characteristics
Jitter tolerance
Optical interface type
l
:
:
:
:
:
:
:
155 Mbps
NRZ
Complies with ITU-T G.707
Complies with ITU-T G.813
Complies with ITU-T G.957
Complies with ITU-T G.823, G.825
SC connector
Features of 4E1 Optical Multiplexing Module
Optical multiplexing Tributary Module providing 4 PDH optical ports to communicate with multiple remote
CPE’s via optical uplink integrating legacy TDM and Ethernet traffic
Supports mapping of Ethernet traffic from remote CPE’s to VC-12 by GFP/LAPS encapsulation (EoSDH)
l
Supports mapping of E1 traffic to VC-12
l
Supports on-line software upgrade of local and remote equipment
l
Works opposite ECAT-04E remote CPE
l
l
Technical Specifications
4 PDH optical ports, each of 4*E1+100Mbps capacity
Each PDH optical port supports 150Mbps data rate
Supports ALS function and Dying Gasp
l
l
l
Features of 4E1 Optical Multiplexing Module with GE Uplink
Optical multiplexing Tributary Module providing 4 PDH optical ports and one Gigabit Ethernet uplink to
communicate with multiple remote CPE's via optical uplink integrating legacy TDM and Ethernet traffic
Supports 4*4E1 traffic capacity per module aggregated to STM-1 card
l
Supports on-line software upgrade of local and remote equipment
l
l
GbE port provides uplink for Ethernet traffic from remote CPE’s
l
Technical Specifications
4 PDH optical ports, each of 4*E1+100Mbps capacity
Each PDH optical port supports 150Mbps data rate
10/100/1000 Gbps Ethernet port
l
Supports ALS function & Dying Gasp
l
l
l
Features of 8E1 Optical Multiplexing Module with FE Uplink
Optical Multiplexing Tributary Module providing 2 PDH optical ports ((1+1) redundancy with
port priority) and one Fast Ethernet interface integrating legacy TDM and Ethernet traffic
Multiplexes 8 E1 streams and Ethernet traffic
l
Fast Ethernet port provides uplink for Ethernet traffic from remote CPE
l
Supports mapping of E1 traffic to VC-12
l
Supports on-line software upgrade of local and remote equipment
l
l
Technical Specifications
2 PDH optical ports (8*E1+100Base-T capacity)
Each PDH optical port supports 150Mbps data rate
10/100 Mbps Ethernet port
l
l
l
Application
PDH Fiber
ECAT-04
2 E1
PBX
WAVES-12
PBX
ECAT-04
(1+1)
STM-1/4
4 E1
PDH Fiber
LAN SWITCH
ETH
PBX
SDH
PDH Fiber
ECAT-08
8 E1
GE
LAN SWITCH
Tributary
ETH
PBX
Features of 2-Wire SHDSL Tributary Module
Provides eight 2W G.SHDSL ports on two RJ45 interfaces
Operates on multiple Data Rates (3~32)x64Kbps on each 1-pair cable
Complies with ITU-T G.991.2 for G.SHDSL
l
TC-PAM Line Coding
l
Provides extensive diagnostics, including loopbacks, G.SHDSL
l
performance monitoring
l
Key Features
l
Technical Specifications
Compliance to standards : ITU-T G991.2
Interface
: 8 G.SHDSL ports on two RJ45
interfaces
l
LED indicators
: System status, Interface status
l
l
Environment of operation :
Operating temperature
Storage temperature
Humidity
l
: -5 ~ 50 degree Centigrade
: -40 ~ +75 degree Centigrade
: < 90%, non-condensing
Application
WITE LITE
SDH
Network
V.35
SHDSL
WAVES-12
STM-1
PBX
WITE LITE
E1
SHDSL
GBE
WITE LITE
SHDSL
Packet
Switched
Network
ETH
LITEVIEW
ROUTER
Application
Features of 2-Wire SHDSL Module with FE Uplink
Provides eight 2W G.SHDSL ports on two RJ45 interfaces
Operates on multiple Data Rates (3~32)x64Kbps on each 1-pair cable
Complies with ITU-T G.991.2 for G.SHDSL
l
TC-PAM Line Coding
l
Provides extensive diagnostics, including loopbacks, G.SHDSL
l
performance monitoring
l
Key Features
l
Technical Specifications
Compliance to standards : ITU-T G991.2
Interface
: 8 G.SHDSL ports on two RJ45
interfaces and one 10/100 Ethernet Port
l
LED indicators
: System status, Interface status
Environment of operation :
l
Operating temperature
: -5 ~ 50 degree Centigrade
Storage temperature
: -40 ~ +75 degree Centigrade
Humidity
: < 90%, non-condensing
l
l
Application
WAVES-12
SHDSL
2.3 Mbps over 2W
FE
PSN
GbE/FE
FE
SHDSL
4.6 Mbps over 4W
LITEVIEW
Features of SHDSL.bis Tributary Module
G.SHDSL interface:
8x2-wires flexible configuration with aggregation function.
l
Supports P-to-MP aggregation of eight nos. of WITELITE 2-Wire
l
Ethernet modems (5.7Mbps each)
Supports P-to-MP aggregation of four nos. of WITE LITE 4-Wire
l
Ethernet modems (11.4 Mbps each)
Supports P-to-P for 45.6 Mbps with WAVES-01and CW8SHDSL.bis
l
Standards : Complies with enhanced G.991.2 and ETSI 101524
l
Ethernet Throughput : 5.7Mbps at 2-wire (1 pair), 11.4Mbps at 4-wire (2-pair),
l
22.8Mbps at 8-wire (4 pairs) and 45.6Mbps (8 pairs)
Transmission Distance : Upto 2.5 Km for 5.7 Mbps over each pair on 24 AWG
l
Working mode : STU-C (master, by default), STU-R (slave)
l
l
Technical Specifications
Performance
Capacity
l
Fast Ethernet port
l
l
MTU
Supports auto-MDI/MDIX
: Switching fabric 0.832~1Gbps
: 32MB SDRAM, 8MB flash, 128KB Switch Buffer
: 10/100 Base-TX (RJ-45, Cat5 UTP)
: 1632 Bytes
G.SHDSL.bis Line Interface :
l
Line type
Line Coding
Line Rate
Impedance:
Connector
:
:
:
:
:
2/4/8/16- wire
4/16/32 TC-PAM
192-22.8Mbps
135 Ohms Balanced
RJ-45
Application
WAVES-12
PSN
SHDSL.bis
(5.7Mbps over 2wire)
FE
GbE/FE
FE
SHDSL.bis
(11.4Mbps ov
over 4wire)
LITEVIEW
Highlights of High Speed G.SHDSL.bis Module
Highlights
G.SHDSL Specification
l
Service Assurance
l
TC-PAM 64 (per pair – 11.4Mbps) support,
8/16 wires up to 91.2Mbps
Supports IEEE802.1q, 802.1ad (QinQ),
802.1p and SLA
Advanced Network
Supports IEEE 802.3ah, 802.1ag,
ITU-T Y.1731 OAM
Service Transmission
Supports TDM and Ethernet simultaneously
Easy Management
Management via Telnet, CLI,
Web management, SNMP
l
l
one pair allows 1 Ethernet+1 E1
l
Features of High Speed G.SHDSL.bis Module
Main feature
l
Compact and high performance stand-alone unit
Supports G.SHDSL.bis technology
G.SHDSL specification
l
TC-PAM 16 & TC-PAM 32 - ITU-T G.991.2.(2004)
TC-PAM 64 (per pair - 11Mbps) support
ITU G.991.2 Annex A , Annex B , Annex F and Annex G
EFM bonding,
8/16 wires up to 91.2Mbps
G.SHDSL interface
l
8x2 wires flexible configuration with aggregation function
Supports PTMP aggregation of 8 nos. of PIXIE-2W Remote Modems
Supports PTMP aggregation of 4 nos. of PIXIE-4W Remote Modems
Supports PTP for High Speed Ethernet services opposite
CW8SHDSL.bis-N module (Up to 91.2Mbps)
Ethernet switching function
l
MTU : 1632 Bytes
l
Flow control
l
IEEE 802.3x in full duplex mode
Back pressure in half duplex mode
Rate limit
l
Max rate limit:100,000Kbps
Ingress rate limit per port with increment 64Kbps(64K-1M),
1Mbps(1-100M)
Egress traffic shaping per port
Storm Control
l
Broadcast/Multicast/Unicast DLF storm control
Control mode: Global/bps
Default value:64Kbps
QOS
l
Ethernet throughput
l
11.4Mbps at 2-wire(1 pair); 22.8Mbps at 4-wire (2 pair)
45.6Mbps at 8-wire(4 pair); 91.2Mbps at 16-wire(8 pair)
Transmission distance
l
Up to 2.6km (1.825miles) for 5.7Mbps over each pair on 26 AWG
Working mode
l
STU-C (Master, by default) ,STU-R (Slave)
E1 interface mode
l
Supports E1 unframed; framed:PCM30,PCM30C,PCM31,PCM31C
Traffic priority, IEEE 802.1P, COS/DSCP/port-based
Global queue scheduling, SP ,WRR, SP+WR,
WRR weight range:1-125
VLAN
l
4K active VLANs
Port PVID overwrite
Q-in-Q
l
Port Q-in-Q
L2TP
l
BPDU, DOT 1x, LACP
Loopback detection
l
Individual port will be shut down if loopback is detected
Cable diagnostics support
l
SLA
l
Layer-2 / Layer-3 SLA
MAC Address table
l
8K MAC address
Add/remove/search MAC address table entries
View MAC address statistics
MAC address aging time configurable:15-3, 825s
MAC address learning threshold per port
Optional MAC address table limit per port:1-255
Management features
CFM
l
IEEE802.1ag & Y.1731
128 MEP & 128 MA supported
Other features
Error tolerance
l
System error report
Fast recovery during serious error
Hardware voltage & temperature monitoring
OAM
l
IEEE802.3ah OAM (discovery, link performance monitor ,
remote loopback testing, remote failure indication)
Extended OAM
DHCP
l
IDHCP Snooping
DHCP Client
DHCP Option82
Security
l
User classification & password protection
RADIUS
TACAS+
Binding of MAC address & port
Port Isolation
PPPoE Agent
Maintenance
l
Ways of Management
l
CLI-based management through CONSOLE port or Telnet/SSH access
Inband web-based management
Inbuilt SNMP agent
GUI-based concentrative management on LITEView NNM system
Software update
l
Xmodem/FTP upgrade in BOOTROM
FTP/TFTP (system & configuration files)
Debug information output
Port statistics
Port dynamic statistics
Password recovery support
l
Technical Specification
Technical Specification
Compliance to standards
l
IEEE802.3-2002
IEEE802.3ah-2004
IEEE802.3 10BaseT
IEEE802.3u 100BaseTX
IEEE802.3 1000BaseT
IEEE802.1d
IEEE802.3ad
IEEE802.1ad, IEEE802.3z
IEEE802.3ab
IEEE802.3x full duplex on
IEEE802.1q-2003
IEEE802.1p, IEEE802.1w
ITU G.991.2
RFC2416
RFC2011 SNMPv2
RFC2012 SNMPv2
RFC2013 SNMPv2
G.SHDSL interface
8/16 wires SHDSL
2*RJ45 connector
TC-PAM 64 support
Annex A,B,F,G support
Indicators : LNK,STU-C
Ethernet interface
1*1000M RJ45 connector
Full/half duplex mode
Auto MDI/MDI-X
100m distance
Indicators:1000M, LNK, ACT
l
l
Serial port configuration :
l
9600bps/8bit/none parity/
1 stop bit/none flow control
Power supply
Power consumption
: AC and DC via Waves-12 chassis
: < 10W (at max load)
Environment of operation
Operating temperature
Relative Humidity
Storage temperature
Relative Humidity
:
:
:
:
:
Dimensions (W x H x D)
Weight
: 240 mm x 25mm x225 mm
: < 600 grams
l
l
l
l
l
0 ~ 45 degree Centigrade
10 ~ 90% non-condensing
-25 ~ 60 degree Centigrade
5 ~ 95% non-condensing
Application
Technical Specification
SHDSL.bis
WAVES -12
PSN
PIXIE-4W
FE
(22.8Mbps over 4-wire)
Bonded SHDSL.bis copper pairs
GbE/FE
PIXIE-2W
SHDSL.bis
FE
(11.4Mbps over 2-wire)
STM-1/STM-4
SDH
PIXIE-4W
SHDSL.bis
(22.8Mbps over 4-wire)
LITEVIEW
FE
Features of 1-Port FE EOS Tributary Module
Ethernet Module for WAVES chassis to aggregate Ethernet traffic from customer sites
(8*VCG’s) in SDH network to Ethernet uplink interface
Aggregates up to 8 VCG’s to single Fast Ethernet aggregation trunk.
l
Supports single Fast Ethernet port
l
Supports on-line software upgrade of local and remote equipment
l
l
Technical Specifications
Supports GFP/LAPS encapsulation and VCAT, LCAS function
Supports IEEE 802.1q VLAN & port VLAN
Maximum 8K MAC addresses and 4096 VLAN ID
l
Up to 4 output priority queues
l
l
l
Application
EOS-ADM
FE
VCG-1
WAVES-12
METRO
SWITCH
STM-1
/STM-4
FE (Copper
or Fiber)
VCG-8
FE
EOS-ADM
LITEVIEW
Features of 8-Port FE Tributary Module
8-Port FE Tributary Unit for WAVES-12
Ethernet Module for WAVES chassis for encapsulating Ethernet traffic
from customer site to SDH network
Aggregates Ethernet Traffic from each port to STM-1 aggregation
l
trunk via VC-12 mapping (individual VCG’s for each port)
Supports on-line software upgrade of local and remote equipment
l
l
l
Technical Specifications
4/8 10/100Base-T Ethernet ports (Electrical RJ-45 connector)
Rate-Limiting with N*VC-12 steps sharing 63*VC-12 for the module
Supports GFP/LAPS encapsulation and VCAT, LCAS function
l
l
l
Application
SWITCH
EOS-ADM
VCG-1
WAVES-12
FE (Copper)
SWITCH
STM-1
/STM-4
FE (Copper)
VCG-8
SWITCH
EOS-ADM
SWITCH
LITEVIEW
Features of 32-Port E1 Tributary Module
32 E1 tributary Unit for WAVES-12
Supports up to 32 Electrical E1 interfaces per module
Supports mapping of E1 traffic to SDH aggregation card of WAVES-12
l
Supports on-line software upgrade of local and remote equipment
l
l
l
Technical Specifications
32 Electrical E1 interfaces per module (Balanced 120 Ohms Interface)
Data rate support 2048Kbps ± 50
Support HDB3 line code
l
Conforms to ITU-T G.703, G.823 E1 standards
l
l
l
Application
BTS
WAVES-12
E1 Links
ADM
STM-1
/STM-4
E1 Links
LITEVIEW
BTS
Ordering WAVES-12
WAVES/12/STM-1/N/DC/R
WAVES/M/PS300
WAVES/FAN
WAVES/M/N
WAVES/M/STM-4
WAVES/M/STM-1
WAVES/M/2GE
WAVES/M/2W/8
WAVES/M/FE/2W/8
WAVES/M/SHDSL.bis/2W/8
WAVES/M/SHDSL.bis/N/2W/8
WAVES/M/STM-1/T
WAVES/M/32E1
WAVES/M/DS0
WAVES/M/OP/4E1x4/EOS/S2
WAVES/M/OP/4E1x4/GE/S2
WAVES/M/OP/8E1/FE/R/S2
WAVES/M/VCG/1FE
WAVES/M/VCG/8FE
WAVES/M/4VCG/4FE
6U high, SNMP managed Last Mile Multi-Service Access rack with 2xSTM-1 interface module
(1310nm Single-mode, 15Kms range), Network Management module, dual DC power supply
modules and 1U high fan tray
-48V DC power supply module
1U high Fan Tray for WAVES-12
Network Management Module for WAVES-12
SDH STM-4 Aggregation Module, 2 STM-4 optical interfaces (1310nm Single Mode, 15Kms
range)
SDH STM-1 Aggregation Module, 2 STM-1 optical interfaces (1310nm Single Mode, 15Kms
range)
Gigabit Ethernet Aggregation Module, 2 combo GbE interfaces (2*10/100/1000Base-T and
2*1000Base-X combo ports)
G.SHDSL module with 8 2-wire G.SHDSL modems (2*RJ-45 interfaces)
G.SHDSL module with 8 2-wire G.SHDSL modems (2*RJ-45 interfaces) & 1 10/100Base-T
Fast Ethernet interface
G.SHDSL.bis module with 8 2-wire G.SHDSL.bis interfaces (2*RJ-45) & 1 10/100Base-T Fast
Ethernet interface
High Speed G.SHDSL.bis module with eight 2-wire G.SHDSL.bis interfaces (2*RJ-45) & one
10/100/1000Base-T Fast Ethernet interface
SDH STM-1 Tributary Module, 2STM-1 optical interfaces (1310nm Single Mode, 15Kms
range)
32*E1 Balanced 120 Ohms Interfaces Tributary Module
DS0 Cross-Connect Tributary Module
4-port PDH Optical Multiplexing Module (each port: 4E1 with 100Mbps capacity, 1310nm
Single Mode, 60Kms range) with EOS functinality
Single Mode, 25Kms range) with EOS functionality and 1+1 redundancy
2-port PDH Optical Multiplexing Module (8*E1 with 100Mbps capacity, 1310nm Single
Mode, 60Kms range) with 1 10/100Base-T Ethernet port and 1+1 redundancy
1-port Fast Ethernet Module with EOS functionality & 1*10/100Base-T Interfaces
8-port Fast Ethernet Module with EOS functionality & 8*10/100Base-T Interfaces
4-port Fast Ethernet Module with EOS functionality & 4*10/100Base-T Interfaces
MRO-TEK Limited
Bellary Road, Hebbal
Bangalore - 560 024, INDIA
Phone : +91-80-23332951
Fax : +91-80-23333415
Email : mrotek@vsnl.com
Web: www.mro-tek.com
TM
Copyright MRO-TEK Limited - 2012
is registered for Trade Marks with appropriate authorities.
Specifications are subject to change without notice. E & OE.
V12_05
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising