8x8 DVI KVM Dual Link Matrix with Push Button

8x8 DVI KVM Dual Link Matrix with Push Button
8x8 DVI KVM Dual Link Matrix
with Push Button Control
Route any eight computer sources with DVI, USB
and Audio to any eight KVM workstations with
Front Panel Push Button Control
The GefenPRO 8x8 DVIKVM DL Matrix provides a professionalgrade solution to route DVI, USB, and Audio from any eight
computers to any eight KVM workstations. Dual link resolutions
up to 3840x2400 are supported. Audio can also be routed
with the video using mini-stereo cables to provide full multimedia
content for digital signage applications. The front panel display
shows the current routing status and the front panel push buttons
are used to manage local source routing. Four methods are
available for controlling the GefenPRO 8x8 DVIKVM DL
Matrix: Front panel push buttons, IR remote, RS-232
interface, or using IP control with built-in web interface.
How It Works
Connect up to eight KVM source devices to the GefenPRO 8x8
DVIKVM DL Matrix using the supplied DVI cables. Connect up to
eight monitors to the DVI outputs. Connect the USB devices
(keyboard, mouse device, etc.) to the USB input and output
connectors. For audio, connect mini-stereo cables between each
audio source and the audio inputs on the Matrix. Connect the
mini-stereo cables between the audio outputs on the Matrix to the
audio device. Plug in the power cord and apply power to the
Matrix. The DVI, USB and Audio sources will be routed according to the current routing selection.
Note: The 8x8 DVI Dual Link Matrix only supports digital DVI
• Supports resolutions up to 1920 x 1200 and 3840 x 2400
• Advanced EDID management permits upload of custom
internal or external EDID settings
• Serial RS-232 interface for remote control via a computer
or control automation devices
• Status LCD (shows routing status)
• Front panel control buttons for local switching
• IR Remote Control
• Built-in IR Extender
• IP Control
• Output masking command
• Grounding Pin
• Internal Power Supply
• Standby mode
• Energy Star Compliant
• Supports DDWG standards for DVI
• Power ON / OFF switch
• Rack-Mountable
Video Amplifier Bandwidth: 2 x 165 MHz
Input Video Signal: 1.2 Volts p-p
DVI Connectors: (16) DVI-I
USB Input Connectors: (8) USB Type-B
USB Output Connectors: (16) USB Type-A
Audio Connectors: (16) 3.5mm Mini-Stereo
IR Extender: 3.5mm Mini-Stereo
RS-232 Interface: DB-9 female
IP connector: RJ-45
Power Supply: 110/220V AC (internal)
Power Connector: IEC
Power Consumption: 90 Watts (max)
Operating Temperature: 0 – 40 °C
Rack mountable: 2U rack space, rack ears included
Dimensions: 17.25" W x 3.5" H x 12" D
Shipping Weight: 28.1 lbs
Gefen, LLC
20600 Nordhoff Street, Chatsworth CA 91311
Tel. (818) 772-9100 (800) 545-6900 Fax (818) 772-9120
*Specifications subject to change without notice.
All trademarks are the properties of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF