Detailed specification - DAE e

Detailed specification - DAE e
Detailed specification
Item: SMD Soldering and Desoldering Station
Qty: 1 set
Indicative make/part no.:
Weller make WXR3031 or equivalent (1set) along with listed accessories (8 sets)
S.No.
Parameter
Specification
1
Soldering power unit
Unit should have 3 independent channels with vacuum
channel for pick up:
a. Soldering
b. Desoldering
c. Hot air iron
2
Power Consumption and input power 600 watts maximum , 230V, 50Hz, Single phase supply
required
3
Display
LCD display of set temperature. Single and multi
channel display Mode
4
Temperature setting resolution
1°C or better
5
Temperature setting range
a
Soldering iron 120 W
100°C - 450°C or better
b
Desoldering iron 120 W
50°C - 450°C or better
c
Hot air irons 200 W
50°C - 550°C or better
6
Temperature stability
± 2°C or better
7
Features required
1) Provision for setting standby time and standby
temperature.
2) Auto off feature.
3) Possibility of setting parameters to each channel
individually.
4) Facility to feed temperature offset when tool is out
of calibration.
5) On and off time control.
6) Hot air flow control.
7) Vacuum on and off time control.
8) Lock Mode facility.
9) It should be ESD safe
Accessories:
1
a
Hot Air Desoldering Iron 200W
Hot Air Pencil
1 set With following attachments
200 Watt, 24 V
Page 1 of 4
b
Hot Air Round Nozzle
Ø 3.0 mm (Qty. – 2 Nos.)
Ø 1.2 mm (Qty. – 2 Nos.)
c
Safety rest with dry cleaner
1 set
d
Adapter for Hot Air Pencil 200W
1 set
e
Nozzle Changing Tool
1 set
2
Desoldering Iron 120W
1 set With following attachments
a
Desoldering Pencil
120 Watt, 24 V
b
Pliers for Desoldering nozzles
1 set
c
Desoldering Nozzle
Inside Ø 1.0 mm (1 Nos.)
Inside Ø 1.2 mm (1 Nos.)
Inside Ø 1.4 mm (1 Nos.)
Inside Ø 1.8 mm (1 Nos.)
d
e
Safety rest, Cleaning Set & Cone cleaner
Glass
tube
desoldering iron
of
1 set
4 Nos.
f
Filter cartridge
10 Nos.
3
Soldering Iron 120W
1 set With following attachments
a
Soldering Pencil
120 Watt, 24 V
b
Safety rest with dry cleaner
1 set
c
Chisel Tip
0.8 mm (1 Nos.)
1.6mm (1 Nos.)
3.2mm (1 Nos.)
2.4 mm (1 Nos.)
d
Gull wing tip
0.8 mm (1 Nos.)
2.3 mm (1 Nos.)
4
Vacuum Pick-up Pencil
1 set With following attachments
a
Vacuum Pick-up Pencil
1 set
b
Heat Resistant Silicon Rubber Vacuum 1 No. each
nipples of different sizes for picking all
types and sizes of SMD Components
c
Heat Resistant Silicon Rubber Hose
1 set
5
Micro Soldering Iron 40W
1 set With following attachments
a
Soldering Pencil
40 Watt, 12V
Page 2 of 4
b
Heat-up time
Order of few seconds
c
Temperature range
100°C - 450°C or better
d
Safety rest with dry cleaner
1 set
e
Standard Soldering Tip Chisel
1.3 mm (2 Nos.)
f
Gull wing
1.2 mm (2 Nos.)
g
Chisel tip
0.4 mm (1 Nos.)
6
Micro Desoldering tweezers 80W
1 set With following attachments
a
Heating output
80 W
b
Heat-up time
Order of few seconds
c
Temperature range
100°C - 450°C or better
d
Safety rest with dry cleaner
1 set
e
Standard Soldering Tip
0.7 x 0.4 mm, 450 (2 nos.)
7
ESD Safe PCB board Holder
1 set With following attachments
a
Max. size
160 x 235 mm
b
Rotation
Capable to rotate through 360° in increment of 15°
c
Cushioned arm for component fixing
1 set Required
8
Vacuum pick-up wand
For easy pick-up of small components of different
sizes.
General conditions

Standard onsite warranty of the supplied product must be for at least one year from the date of
acceptance at RRCAT.

If the supplier is not an OEM, Authorization certificate from the principals / OEM should be submitted to
deal in the quoted product. Authorization certificate from the OEM must indicate the willingness of the
OEM to extend the maintenance and repair support during Warranty period. There should be an explicit
undertaking from the quoting party in this regard otherwise quotation will be rejected.

Detailed data sheet / application notes duly supplied by the OEM must be submitted.

Supplier must comply to install the soldering / desoldering unit at RRCAT site and to demonstrate the
complete working range of instrument in presence of RRCAT officials.

Vendor shall provide details of facilities they have within INDIA to support warranty and repair.

All the items indicated above must be from a single source and must be compatible to one another.

Final acceptance will only be given after complete supply, installation and demonstration of soldering
and desoldering unit at RRCAT.

All items must be supplied in original packing by the manufacturer.

Order will only be placed for the complete set and not for the individual items in the set.
Note:
It is mandatory to fill and give the following compliance table along with the offer.
Page 3 of 4
Compliance table:
Sr. No.
Parameter
1
Soldering power unit
2
Power Consumption and input power
3
Display
4
Temperature setting resolution
5
6
7
Temperature setting range
Temperature stability
Required features
Compliance
Accessories
1
Hot Air Desoldering Iron 200W (1 set with mentioned
attachments)
2
Desoldering Iron 120W (1 set with mentioned attachments)
3
Soldering Iron 120W (1 set with mentioned attachments)
4
Vacuum Pick-up Pencil (1 set with mentioned attachments)
5
Micro Soldering Iron 40W (1 set with mentioned
attachments)
6
Micro Desoldering tweezers 80W (1 set with mentioned
attachments)
7
ESD Safe PCB board Holder (1 set with mentioned
attachments)
8
Vacuum pick-up wand
Page 4 of 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising