DBV43TL Quick Start Guide
Contents
Ultra Resolution Outdoor IR
Dome Camera
Mounting screws x 4
IT’S ALL ON THE WEB!
Product Information
Specification Sheets
User Manuals
Quick Start Guides
Latest News
Video Tutorials & Demos
ULTRA RESOLUTION
OUTDOOR IR DOME CAMERA
MODEL: DBV43TL
WARNING - A REGULATED UL / CSA APPROVED 12V DC power
supply is REQUIRED for use with this camera. Use of a non-regulated,
non-conforming power supply can damage this product and voids the
warranty.
QUICK START GUIDE
Features
English Version 1.0
• Ultra Resolution 1/3” image sensor / 600TVL
• True Day/Night with Mechanical ICR
• 3.6mm Wide Angle lens
• Cold climate capability
(minimum operating temperature -22°F/-30°C)
• 65ft (20m) IR Night Vision*
• IP66 Weatherproof Rating**
• 3-Axis design for Wall/Ceiling Mounting
• 12V DC operation
* IR Illumination range under ideal conditions. Objects at or beyond
this range may be partially or completely obscured, depending on
the camera application
** Not recommended for submersion in water
Safety Precautions
• Use an appropriate low voltage power cable to prevent
fire or electrical shock.
• Make sure to install the camera in an area that can
support the camera weight.
• There are no user serviceable parts inside the camera.
Please do not disassemble the camera.
• Do not clean the lens cover with an abrasive cleaning
material. Please use a soft cloth to clean the lens cover.
VISIT
www.digimerge.com
Digimerge Technologies Inc.
Copyright © 2013
As our products are subject to continuous improvement, Digimerge
reserves the right to modify product design, specifications and prices,
without notice and without incurring any obligation. E&OE
www.digimerge.com
Installing the Camera
Setting up the Camera
ATTENTION - Test the camera prior to selecting a permanent
mounting location by temporarily connecting the camera(s) and
cables to the DVR.
1. Rotate the camera base counterclockwise
to separate it from the ball camera and
dome cover.
2. Feed the BNC / power cable through the
camera base.
3. Connect the video and power cable as
shown in the next section ‘Setting up the
Camera’.
4. Mount the camera base to the wall or
ceiling using the included screws.
1. Connect the BNC connector of the camera to
the video cable.
2. DC Power—Power Adapter: Connect a
12V DC Power Adapter (not included) to the
camera. Plug the Power Adapter into a local
power outlet.
•DC Power—Power Pigtail (not included):
Connect a Power Pigtail to the camera.
Connect the terminating wires of the cable
directly to the DC power source.
NOTE: The Power Pigtail is a non-polarity input. You
can connect the wires to either the positive or negative
ports of the DC power source.
ATTENTION - This camera includes an Auto Mechanical IR Cut Filter.
When the camera changes between Day/Night viewing modes, an
audible clicking noise may be heard from the camera. This clicking is
normal, and indicates that the camera filter is working.
5. Position the dome cover over the camera
and screw it clockwise halfway onto the
camera base.
6. Move the ball camera to the desired
position. While holding the ball camera
firmly in place, screw the dome cover the
rest of the way to secure it to the camera
base. Holding the camera prevents it from
moving while installing the dome cover.
Camera Specifications
Image Sensor
1/3” Color Image Sensor
Video Format
NTSC
Effective Pixels
H: 728 V: 488
Horizontal Resolution
600 TVL
Scan System
2:1 Interlace
Sync System
Internal
S / N Ratio
52dB (AGC Off)
Iris
AES
AES Shutter Speed
1/60 ~ 1/12,000 sec.
Min. Illumination
0.2 Lux without IR LED
0 Lux with IR LED
Video Output
Composite 1.0Vpp @ 75ohm
Lens Focal Length / Type
3.6mm F2.0 / Fixed
FOV (Diagonal)
78°
Termination
BNC Type
IR Range / Qty.
65ft / 20m; 20 IR LED’s
Power Requirement
12V DC ±10%
Power Consumption
12V: 200mA Max with IR LED
Operating Temp. Range
-22° ~ 122°F / –30° ~ 50°C
Environmental Rating
IP66
Dimensions (LxH)
2.8” x 3.8”
70mm x 95mm
Weight (including stand)
0.7lbs / 0.3kg
Dimensions
Camera Base
95mm / 3.8”
70mm / 2.8”
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising