AUTO LENS ADAPTER

AUTO LENS ADAPTER
AUTO
LENS ADAPTER
USER MANUAL
LAE-CM-CEF
Canon EF/EF-S Lens to Canon EOS-M Camera
INTRODUCTION
Thank you for purchasing the
Vello LAE-CM-CEF Auto Lens
Adapter – Canon EF/EF-S Lens
to Canon EOS-M Camera. This
adapter allows you to mount any
Canon EF or EF-S lens to a Canon
EOS-M camera. With an EF or
EF-S lens mounted to a Canon
EOS-M camera using this adapter,
all automatic functions, such as
auto focus and auto exposure, are
available and fully operational. A
removable tripod mount collar
with a ¼" socket is included.
2
CONTENTS INCLUDE
• Vello LAE-CM-CEF Auto Lens
Adapter - Canon EF/EF-S Lens
to Canon EOS-M Camera
• Front and rear caps
• Removable tripod mount collar
• User manual
3
INTRODUCTION
The Vello Auto Lens Adapter –
Canon EF/EF-S Lens to Canon
EOS-M Camera can expand the
arsenal of lenses for your Canon
EOS-M camera using lenses you
already own. With this adapter,
you can mount any Canon EF
or EF-S lens to a Canon EOS-M
camera. Just attach the adapter
to your EF or EF-S lens, then
mount the lens and adapter to
your Canon EOS-M camera.
4
When using an EF lens, there will be a crop factor of 1.6x, so that the
apparent focal length of the lens will be 1.6x of the actual focal length.
With EF-S lenses, there is no apparent change in the focal length. All
camera functions will operate normally, including auto focus, auto
exposure, and touch-screen modes. A removable tripod mount collar
is included for use with longer lenses. When using a lens that’s heavier
than the camera, it is recommended that you use the tripod mount
collar to mount the camera on a tripod. Do not use the tripod mount
socket on the camera when using a telephoto lens. A heavy lens will
put excessive stress on the lens mount of the camera when the camera
is mounted to a tripod using the camera’s tripod mount socket.
5
PRECAUTIONS
• Mount the lens to the adapter
in a dust-free environment.
• Avoid sandy or dusty
environments when using this
adapter.
• Handle the adapter with care—
don’t drop it, and avoid bumps
and shocks.
• Clean the adapter by wiping it
with a soft, dry cloth.
6
• Do not use solvents such as
benzene, alcohol, detergents,
etc. to clean the adapter.
• Be sure to read the operating
instructions for your digital
camera.
• Keep this unit away from water
and flammable gases or liquids.
• Do not attempt to disassemble
or repair the equipment—doing
so will void the warranty, and
Vello will not be responsible for
any damage.
• All photos are for illustrative
purposes only.
• Please read and follow these
instructions, and keep this
manual in a safe place.
• Handle the unit with care.
• Keep this unit away from
children.
• Use only parts provided by the
manufacturer.
7
OVERVIEW
1
EF/EF-S lens mount
2
EF lens red dot indicator
3
EF-S lens white square indicator
4
Camera mount dot indicator
5
Lens release button
6
EOS-M camera mount
7
Tripod collar
8
Tripod collar release wheel
9
1/4" tripod socket
8
2
1
3
4
5
6
9
7
8
9
ATTACHING THE LENS ADAPTER
1. Turn the camera’s power off.
2. Remove the rear lens cap,
camera body cap, and lens
adapter caps.
3. With an EF lens, align the inner
red dot on the lens adapter
with the red dot on the lens.
With an EF-S lens, align the
white square on the lens
adapter with the white square
on the lens.
10
4. Slowly and carefully insert
the lens into the adapter and
carefully rotate it clockwise
until it clicks into place.
11
5. Align the white mark on the
lens adapter with the white lens
attachment mark on the camera
and slowly rotate the adapter
and lens clockwise until it clicks
into place on the camera.
Note: In order to use auto focus
with the camera, be sure that the
lens is set to auto focus.
12
REMOVING THE LENS ADAPTER
1. Turn the camera’s power off.
2. Hold down the lens release
button on the camera and
rotate the lens and adapter
counterclockwise until they
come to a stop. Remove from
the camera.
13
3. Hold down the release button
on the adapter mount, and
remove the lens by rotating it
counterclockwise until it comes
to a stop.
4. Separate the lens from the
adapter mount.
5. Replace the rear lens cap,
camera body cap, and lens
adapter caps.
14
MOUNTING / REMOVING THE TRIPOD COLLAR
1. Align the tripod collar mounting
screw with the mounting hole
on the bottom of the lens
adapter.
15
2. Carefully rotate the mounting
wheel on the tripod collar
clockwise until the tripod collar
is securely attached to the lens
adapter.
16
3. To remove the tripod collar,
rotate the mounting wheel
counterclockwise until the
collar is loose enough to
remove from the lens adapter.
Note: When attaching a lens that’s
equipped with a built-in tripod
collar to the lens adapter, use the
tripod collar on the lens to mount
it to a tripod.
17
COMPATIBILITY
Lenses that are compatible with the Vello Auto Lens Adapter
– Canon EF/EF-S Lens to Canon EOS-M Camera.
Compatible
18
Canon EF
Lenses
Canon EF-S
Lenses
Canon CN-E
Lenses
Canon EF-M
Lenses
✓
✓
✗
✗
SPECIFICATIONS
• Dimensions – 2.6” diameter ×
0.8” length (65 × 19.5 mm)
• Weight – 2.9 oz. (83 g)
19
One-Year Limited Warranty
This VELLO product is warranted to the original purchaser to be free from defects in materials and
workmanship under normal consumer use for a period of one (1) year from the original purchase date
or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with
respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion,
of any product that fails during normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the
product has been discontinued, the warranty provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER
MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have
additional rights that vary from state to state.
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return
merchandise authorization (“RMA”) number, and return the defective product to Vello along with the RMA
number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group.
© 2014 Gradus Group LLC. All Rights Reserved.
www.vellogear.com
All other trademarks are the property of their respective owners
GG2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising