USB-104-HUB - Assured Systems

USB-104-HUB - Assured Systems
USB to 4 USB 2.0 Ports
High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
Rugged, industrial grade (-40 ºC to 85 ºC) operation
One upstream host port and four downstream ports
Transaction translator translates data from one speed to another
Downstream ports capable of low-speed (1.5 Mbps), full-speed
(12 Mbps), and Hi-speed (480 Mbps) transfers aggregate
Supports bus powered and self powered modes
Self powered mode accessible via DC power input jack, and for
OEM applications (board only), screw terminals, or 3.5” drive
power connector (Berg)
LED status indicators for power and overcurrent fault conditions
for each downstream port
Compact, low profile enclosure
Can be installed in your desktop 3 ½” front panel drive bay
High retention USB connectors on up- and downstream ports
Embedded miniature USB headers in parallel with each USB
standard connector (both upstream and downstream)
OEM (board only) option with PC/104 mounting holes and
footprint for flexibility in embedded applications
Header connector option with jumper posts for panel mounted
user status LED connection
RoHS compliance Certification
Wide Input power from 7V to 35VDC
The USB-104-HUB is a high performance and low cost solution for USB expansion. It is compliant with the USB 2.0 specification as well as being fully
backwards compatible with USB 1.1. Each of the four downstream ports are capable of low-speed, full-speed and high-speed transfers.
This product utilizes a high-performance, low-power USB 2.0 hub controller. It is USB-IF certified, Windows Hardware Quality Lab (WHQL) compliant,
and its operating temperature is rated for industrial grade temperatures. Being able to operate at industrial grade temperatures, the USB-104-HUB offers
its functionality to a wider range of user applications that many competitors' USB hubs can't provide.
The card has light emitting diodes (LEDs) for status indications. A green LED near the upstream USB type B connector indicates power to the board.
Each downstream port has two respective surface mount LEDs that provides status information. Its green LED near the downstream port's Type A
receptacle indicates that the port is enabled whereas the red LED indicates an overcurrent fault condition. The customer also has the option to use
jumper posts to connect their own LEDs instead of the on-board surface mount indicators if desired.
The USB-104-HUB is fully protected from faulty peripherals connected to its downstream ports. Each port utilizes its own power distribution switch that
provides overcurrent and short-circuit protection. If a fault occurs, the power distribution switch will disengage the respective port and turn on its fault
LED. A fault occurring on one downstream port will not affect other devices attached to the USB-104-HUB’s other downstream ports.
The USB-104-HUB supports bus powered and self-powered applications. In general, the upstream USB port typically provides 500 mA of current (5-unit
load). In bus-powered mode, this is the limiting factor as the downstream ports take power from the upstream port's remaining available power. If the
user's application requires more current for downstream peripherals, the USB-104-HUB can be configured in self-powered mode. External +5V (or from
7V to 35VDC for the “Wide Input” power option) can be supplied to the card through three different methods. It can be accessed through a DC power
input jack, or for OEM applications, via 2-position screw terminals. Standard power can be provided via a traditional 4-pin berg connector receptacle.
All type A and type B USB connectors on board feature a high retention design that complies with the class 1, Div II minimum withdrawal requirement of
over 3 pounds of force (15 Newtons). This connector has an orange color-coded insulator to quickly differentiate it from standard USB connectors.
Using these USB connectors increases reliability and ensures a tight connection. For embedded OEM type applications, all connectors have an
additional miniature latching USB header.
This version is perfect for installation in a desktop / server / industrial PC, putting USB ports where they are most useful, on the front panel. This version
ships with the drive bay adapter bracket installed.
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that its PCB size and mounting
holes match the PC/104 form factor (without the bus connections). This allows our industrial grade USB hub to be added to any PCI-104 or PC/104 stack
by connecting it to a simple USB port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially
important since many newer CPU chipsets do not support ISA and have a healthy supply of USB ports. The USB-104-HUB OEM board can also be
installed using standoffs inside other enclosures or systems.
The USB-104-HUB is available with optional embedded cable assemblies and DIN-Rail mounting adapters.
No software is provided with this board. There is no need to install any drivers for the USB-104-HUB product. It will enumerate as a Generic Hub which
uses the USB Hub Class Driver that is built in Windows OS or Linux. There's no driver needed from the user.
10623 Roselle Street, San Diego, CA 92121 • (858) 550-9559 • Fax (858) 550-7322 • •
October 23rd, 2013
Bus Type(s):
USB 2.0 / 1.1 / 1.0 (USB3.0 compatible)
High / Full / Low speed
Operating Temp.:
Storage Temp.:
Board Dimension:
-40° to +85°C
-40° to +85°C
5-95% non-condensing
3.550 x 3.775 inches
Optional Accessories
-WI Option:
@ 120 mA typical, high speed host, no
active ports (doesn't include downstream
ports' USB device requirements)
7VDC to 35VDC at the DC power jack or
screw terminals
approximately 100 mA available for each
downstream port (~400mA cumulative)
approximately 500 mA available for each
downstream port
Ordering Guide
USB 2.0 Hi-Speed Industrial HUB
4-port hub with bracket for installation
into 3.5” drive bay
Model Options
Wide Input power from 7V to 35VDC
Board only version (no encl.)
RoHS compliance certification
Jumper header posts for LEDs instead
of SMD LEDs (-OEM version only)
DIN rail mounting provision
Power splitter cable for use with
standard PC power supply Molex
connectors terminating in a 4-pin BERG
(3 ½” floppy drive) connector
115VAC Regulated 5VDC Power Supply
1 foot USB cable Type A to micro-fit
OEM header (used for connection to the
upstream USB host port)
6 foot USB cable Type A to micro-fit
OEM header (a longer cable to connect
to the host port)
6 inch embedded micro-fit to micro-fit
USB cable (used to connect from the
HUB micro-fit OEM connectors to
ACCES’ OEM USB I/O boards)
30 inch USB cable with 1x5 standard
(0.1 inch spacing) header connector to
embedded micro-fit
30 inch USB cable with 1x5 metric
(2mm spacing) header connector to
embedded micro-fit
Required Accessories (for USB-3.5-HUB only)
(see descriptions above)
10623 Roselle Street, San Diego, CA 92121 • (858) 550-9559 • Fax (858) 550-7322 • •
October 23rd, 2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF