installation instructions for usb converter (p/n 3425

installation instructions for usb converter (p/n 3425
Title: MNL-USB CONVERTER
Reference: USB CONVERTER INSTALLATION INSTRUCTIONS
Written By: Phil Dilmore
Chentronics Corporation, Norwich NY, USA
Approved By:
DCO: 8593
Revision: A
Issue Date: 6/6/2014
Page 1 of 7
INSTALLATION INSTRUCTIONS
FOR USB CONVERTER (P/N 3425-057-01)
This document and any files attached to it are confidential and intended solely for the use of the individual to whom they are addressed. Any
unauthorized use or re-transmission of this e-mail and attachments is strictly forbidden. If this document is received by anyone other than the
addressee, please delete it and any attachments and notify Chentronics Corporation immediately (Tel. 001.607.334.5531).
Template Revision B 07/12/2012
Title: MNL-USB CONVERTER
Reference: USB CONVERTER INSTALLATION INSTRUCTIONS
Written By: Phil Dilmore
Chentronics Corporation, Norwich NY, USA
Approved By:
DCO: 8593
Revision: A
Issue Date: 6/6/2014
Page 2 of 7
Overview of the USB to RS-485 Converter Installation
This is a USB (Universal Serial Bus) port to 2 wire isolated RS-485 converter. The converter requires no
PCI/ISA slots or IRQs. Simply plug the converter into an available USB port on your computer or hub.
Windows will configure the converter as an additional COM port, compatible with your Windows
applications. The USB bus supplies power so no separate supply is needed. This converter includes
special circuitry that adds 2000 volts RMS of isolation against ground loop and voltage spikes. A pair of
LEDs labeled TD and RD indicates when RS-485 data is being transmitted or received.
Step 1 – Insert the USB DRIVER DISC (part number 07005006) into the PC’s CD/DVD drive.
Step 2 – Connect the included USB cable from the USB Converter (part number 3425-057-01) to an
unused USB port on the PC.
Step 3 – Install the Windows drivers on the PC.
Step 3.1.a – If the AutoPlay window opens automatically:
AutoPlay will prompt you to run the driver installer. For 32-bit Windows machines the
driver is dpinst32.exe for 64-bit Windows machines the driver is dpinst64.exe. Double
click on the appropriate driver.
This document and any files attached to it are confidential and intended solely for the use of the individual to whom they are addressed. Any
unauthorized use or re-transmission of this e-mail and attachments is strictly forbidden. If this document is received by anyone other than the
addressee, please delete it and any attachments and notify Chentronics Corporation immediately (Tel. 001.607.334.5531).
Template Revision B 07/12/2012
Title: MNL-USB CONVERTER
Reference: USB CONVERTER INSTALLATION INSTRUCTIONS
Written By: Phil Dilmore
Chentronics Corporation, Norwich NY, USA
Approved By:
DCO: 8593
Revision: A
Issue Date: 6/6/2014
Page 3 of 7
Step 3.1.b – If the AutoPlay window does not open automatically:
Open a Windows Explorer window and navigate to the directory shown below. Note
that the CD/DVD drive on your PC may not be labeled as D:. Among other directories
and files you will see both the 32-bit Windows machines driver, dpinst32.exe, and the
64-bit Windows machines driver, dpinst64.exe. Double click on the appropriate driver.
Step 3.2 – If you do NOT have administrator privileges:
Windows Access Control (UAC) will prompt you for an administrator password. Enter
the administrator password and proceed to step 3.3.
This document and any files attached to it are confidential and intended solely for the use of the individual to whom they are addressed. Any
unauthorized use or re-transmission of this e-mail and attachments is strictly forbidden. If this document is received by anyone other than the
addressee, please delete it and any attachments and notify Chentronics Corporation immediately (Tel. 001.607.334.5531).
Template Revision B 07/12/2012
Title: MNL-USB CONVERTER
Reference: USB CONVERTER INSTALLATION INSTRUCTIONS
Written By: Phil Dilmore
Chentronics Corporation, Norwich NY, USA
Approved By:
DCO: 8593
Revision: A
Issue Date: 6/6/2014
Page 4 of 7
Step 3.3 – The driver installer opens the following window:
Click the
If this window appears, it indicates drivers are
loading properly.
button to continue.
If this window appears, you will have to login as
administrator before installing the drivers.
This document and any files attached to it are confidential and intended solely for the use of the individual to whom they are addressed. Any
unauthorized use or re-transmission of this e-mail and attachments is strictly forbidden. If this document is received by anyone other than the
addressee, please delete it and any attachments and notify Chentronics Corporation immediately (Tel. 001.607.334.5531).
Template Revision B 07/12/2012
Title: MNL-USB CONVERTER
Reference: USB CONVERTER INSTALLATION INSTRUCTIONS
Written By: Phil Dilmore
Chentronics Corporation, Norwich NY, USA
Approved By:
DCO: 8593
Revision: A
Issue Date: 6/6/2014
Page 5 of 7
Step 3.4 – When the following window appears, the driver installation is complete:
Click the
button to continue.
Step 3.5 – You will be prompted to restart:
Click the
button to restart your PC.
This document and any files attached to it are confidential and intended solely for the use of the individual to whom they are addressed. Any
unauthorized use or re-transmission of this e-mail and attachments is strictly forbidden. If this document is received by anyone other than the
addressee, please delete it and any attachments and notify Chentronics Corporation immediately (Tel. 001.607.334.5531).
Template Revision B 07/12/2012
Title: MNL-USB CONVERTER
Reference: USB CONVERTER INSTALLATION INSTRUCTIONS
Written By: Phil Dilmore
Chentronics Corporation, Norwich NY, USA
Approved By:
DCO: 8593
Revision: A
Issue Date: 6/6/2014
Page 6 of 7
Step 4 – USB Converter DIP Switch settings:
On the back of the USB Converter is a four position DIP switch that determines the
device’s operating mode. Ensure the switches are set as shown in the following table:
Switch
Switch Position Table
Position
Setting
1
On
RS-485
2
On
Echo Off
3
On
2 Wire
4
On
2 Wire
Reference Image
This document and any files attached to it are confidential and intended solely for the use of the individual to whom they are addressed. Any
unauthorized use or re-transmission of this e-mail and attachments is strictly forbidden. If this document is received by anyone other than the
addressee, please delete it and any attachments and notify Chentronics Corporation immediately (Tel. 001.607.334.5531).
Template Revision B 07/12/2012
Title: MNL-USB CONVERTER
Reference: USB CONVERTER INSTALLATION INSTRUCTIONS
Written By: Phil Dilmore
Chentronics Corporation, Norwich NY, USA
Approved By:
DCO: 8593
Revision: A
Issue Date: 6/6/2014
Page 7 of 7
Step 5 – Wiring connections are as follows:
Scanner’s “Communication A” connects to USB Converter’s ComA(+).
Scanner’s “Communication B” connects to USB Converter’s ComB(-).
Scanner’s DC Return “DC(-)” connects to USB Converter’s GND.
Note: If the configuration is a Split or Y, the second set of ComA(+)/ComB(-) ports may
be used since in this application’s defined mode the two ComA(+) ports are internally
connected as are the two ComB(-) ports.
This document and any files attached to it are confidential and intended solely for the use of the individual to whom they are addressed. Any
unauthorized use or re-transmission of this e-mail and attachments is strictly forbidden. If this document is received by anyone other than the
addressee, please delete it and any attachments and notify Chentronics Corporation immediately (Tel. 001.607.334.5531).
Template Revision B 07/12/2012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising