Specifications LightRaise 60wi interactive projector

Specifications LightRaise 60wi interactive projector
Specifications
LightRaise™ projector
control (XCP)
Model SLR-XCP
Physical specifications
Size
10" W × 2 5/8" H × 2 3/4" D
(256 mm × 42 mm × 70 mm)
Weight
Shipping size
2 lb. 3 oz. (1 kg)
18" W × 6" H × 19" D
(455 mm × 150 mm × 480 mm)
Shipping weight
4 lbs. 3 oz. (1.9 kg)
All dimensions +/- 1/8" (3 mm). All weights +/- 0.5 lb. (0.2 kg).
Standard features
Connectors
l
SMART Connect USB B receptacle for an all-in-one audio, video and data connection
using DisplayLink™ technology
l
Recessed multi-pin connector for connecting the VGA + USB adapter or the HDMI™ +
USB adapter
l
4-pin connector for room control
l
RCA composite video input jack and audio input and output jacks associated with the
VGA input (for peripheral devices such as DVD/Blu-ray player)
Cables
The attached XCP harness cable includes the cables you need to connect the XCP to the
projector. However, you must supply the appropriate input cables for your devices.
SPEC IF IC A T ION S
LightRaise projector control (XCP) – Model SLR-XCP
Power button
Tap the Power button to turn the projector on and off. The button illuminates to indicate the
projector status as follows:
Volume controls
Color
Projector status
Solid green
Projector is on
Solid amber
Projector is in Standby mode
Flashing green
Projector is turning on
Flashing amber
Projector is cooling down before entering Standby mode
Not illuminated
Projector is off
The XCP has the following volume controls:
l
Volume strip: tap, tap and hold, or swipe to increase and decrease the volume. The
volume strip’s illumination brightens as you increase the volume.
l
Volume mute: tap to mute the audio from the built-in projector speakers. The mute
button turns amber when activated.
l
A/V mute button: tap to freeze the current image and mute the audio presented by the
projector. The A/V mute button turns amber when activated.
Input switch
Tap the input switch to cycle through the supported input modes. Depending on which
adapter is connected to the XCP, the supported input modes vary as follows:
Active input LEDs
Adapter connected
Input modes available
No adapter
SMART Connect or composite
VGA + USB adapter
VGA or composite
HDMI + USB adapter
HDMI or composite
There are two input LEDs on the XCP. The LED on the side of the XCP indicates when the
side composite connections are active. The LED on the front-bottom side of the XCP
indicates when the SMART Connect is active.
HDCP
The XCP supports HDCP encryption from any source device when connected using the
HDMI adapter.
Firmware
You can upgrade firmware through a USB connection to a computer that has SMART
Product Updater (SPU) installed on it.
Wall mount
One bracket with two screws to support a wall-mounted XCP.
bracket
2
SPEC IF IC A T ION S
LightRaise projector control (XCP) – Model SLR-XCP
Power
requirements
Environmental
The XCP receives power from the projector through the 4-pin power mini-DIN 5V/2A
connector on the XCP harness cable.
China EIP; EU REACH, RoHS, WEEE, Packaging and ErP Standby; US Packaging and
compliance
Conflict Minerals
Regulatory
UL (US/Canada), CE, CB, TUV-GS, IC, FCC, C-Tick, GOST-R, NOM, PSB, PSE
certification
Warranty
Reset button
The XCP has a three-year limited equipment warranty. See warranty document for details.
The reset button is recessed and can be pressed using a thin object such as a pencil.
Installation
Installation instructions are included in the box and available online (see the XCP to SLR60wi
quick connect guide at smarttech.com/kb/170431).
Storage and operating specifications
Storage
-4°F to 122°F (-20°C to 50°C), up to 95% humidity (non-condensing)
temperature
Operational
41°F to 95°F (5°C to 35°C), up to 95% humidity (non-condensing)
temperature
SMART order numbers
SLR-XCP
1017342
LightRaise projector control (XCP)
Wall mounting bracket
Optional accessories
1020516
RS-232 adapter cable
1017070
HDMI+ USB adapter
1017071
VGA + USB adapter
3
SPEC IF IC A T ION S
LightRaise projector control (XCP) – Model SLR-XCP
Physical dimensions
Number
Details
1
4-pin connector for room control
2
DC 5V 2A power connector
3
RCA composite video input and left and right RCA audio input
4
DB9 RS-232F connector
5
Touch USB connector
6
VGA connector
7
HDMI connector
8
Stereo 3.5 mm phone jack for audio line output
smarttech.com/support
smarttech.com/contactsupport
© 2013 SMART Technologies ULC. All rights reserved. LightRaise, smarttech, the SMART logo and all SMART taglines are trademarks or registered
trademarks of SMART Technologies ULC in the U.S. and/or other countries. HDMI is a trademark or registered trademark of HDMI Licensing LLC. All other
third-party product and company names may be trademarks of their respective owners. This product and/or use thereof covered by one or more of the
following U.S. patents: www.smarttech.com/patents. Contents are subject to change without notice. 02/2013.
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising