TeleMyo DTS Telemetry

TeleMyo DTS Telemetry
TeleMyo DTS Telemetry
Direct Transmission Telemetry for EMG & Sensors
•
•
•
•
•
•
•
•
•
Transmits data directly from the electrode site
Operates EMG and other biomechanical sensors
Free electrode type selection, fine wire included
Portable belt receiver with retransmission option
Retransmission range up to 100 meter
Datalogger option via Flash Memory card
4 to 32 channel configuration
Compatible to existing Noraxon hardware and software
Simplifies measurements by eliminating connection cables
Belt Receiver/
Retransmitter
Product Overview
The TeleMyo™ 2400T Direct Transmission System (DTS) for EMG and other
biomechanical sensors directly transmits data from the electrode or sensor site to a belt
worn receiver. This direct transmission concept greatly simplifies the arrangement of
EMG measurements by eliminating the need to arrange cable connections between the
EMG electrodes and EMG amplifier. The small light weight probes are also beneficial
for small subjects like children and small animals.
The Belt Receiver can operate in 3 modes:
•
Direct connection to any PC via USB connection (transmission range 10m)
•
Wireless retransmission of signals in real time to any Noraxon USB receiver
(transmission range up to 100m)
•
Data logging via Flash Memory card
This unique concept gives you flexibility to operate the DTS system without limitations.
The compatibility to Noraxon’s USB receiver systems, operated via WiFi based
retransmission of data, allows you to integrate up to 8 additional stationary analog input
signals (isokinetics, force plates, etc.) and optional analog output of all signals (to e.g.
connect signals to 3D kinematic systems).
1
© 2008, Noraxon U.S.A. Inc.
P-5429 10/08 V4
Noraxon U.S.A. Inc. • 13430 N. Scottsdale Rd., Suite 104 • Scottsdale, AZ 85254
Tel: (480) 443-3413 • Fax: (480) 443-4327 • E-mail: info@noraxon.com • Web Site: www.noraxon.com
TeleMyo DTS Telemetry
The DTS system can operate any configuration between 4 and 32 channels (2
Systems). The default system is equipped with EMG preamplifiers but can be upgraded
with other biomechanical sensors like goniometers, Inclinometers, foot switches, and
accelerometers. A wireless synchronization system can be used to accurately
synchronize the TeleMyo DTS System to other biomechanical devices.
Operation Modes of Belt Receiver
Dependent on functionality aspects within your experiments you can configure and
operate the TeleMyo DTS systems on 3 operation levels:
1. Direct USB based connection of Belt receiver to the PC
In this mode the DTS probes send the data to the Belt receiver which is located directly
besides the PC. An USB connection arranges the real time access of all transmission data
to the PC and data acquisition software. The transmission range is up to 10 meters.
2. Retransmission of data from Belt receiver to desk receivers
This mode operates a second (real time) transmission of data via WiFi to any of Noraxon’s
desk receivers (PC interface Receiver, Mini Receiver or Analog Output Receiver). This
expands the transmission range up to 100 meter in line-of-sight. If the Mini Receiver is
used, up to 8 additional analog input channels can be connected which allows you to
integrate signals from stationary devices like Isokinetics or force plates.
2
© 2008, Noraxon U.S.A. Inc.
P-5429 10/08 V4
Noraxon U.S.A. Inc. • 13430 N. Scottsdale Rd., Suite 104 • Scottsdale, AZ 85254
Tel: (480) 443-3413 • Fax: (480) 443-4327 • E-mail: info@noraxon.com • Web Site: www.noraxon.com
TeleMyo DTS Telemetry
3. Data Logging Mode via Flash Memory card
By exchanging the retransmission WiFi board with a Flash Memory Card the system can be
used as a data logger at any time. Commercial Memory Cards up to 8 GB guarantee
enormous data logging capacity. An easy and comfortable import routine transfers data to
the Noraxon analysis software MyoResearch XP.
Available Desk Receivers:
PC INTERFACE RECEIVER
MINI RECEIVER
ANALOG OUTPUT RECEIVER
Standard Receiver with USB
connection to PC
With 8 additional Input channels &
Wireless Sync. - System
With 8 additional Input channels &
analog Output for all channels
Unique Items
•
Noraxon’s superior signal quality
•
Fully compatible to ISEK and SENIAM standards forsurface and fine wire EMG
•
Expandable for any channel combination between 8 and 32 data channels
•
(two individual DTS Belt Receiver can be combined up to a 32 Channels system)
•
Unique receiver concept with analog input channels and up to 32 analog output channels
•
Li-ion battery with 8 hours operation time
•
Complete line of wireless biomechanical sensors
•
Optional Fine Wire amplifiers with selectable band width
•
Precise and flexible wireless synchronization trigger system
•
Easy installation: no need to struggle with Windows network setting
3
© 2008, Noraxon U.S.A. Inc.
P-5429 10/08 V4
Noraxon U.S.A. Inc. • 13430 N. Scottsdale Rd., Suite 104 • Scottsdale, AZ 85254
Tel: (480) 443-3413 • Fax: (480) 443-4327 • E-mail: info@noraxon.com • Web Site: www.noraxon.com
TeleMyo DTS Telemetry
DTS Probe and Belt Receiver Specifications
Power Requirements
•
Replaceable Li-ion rechargeable battery, operation time
more
than 8 hours after fully charged
Output & Transmission Frequency
(Depending on country)
•
Up to 100 mW (depending on antenna and country
allowance)
•
DSSS 2412-2464 MHz on (up to) 11 selectable radio
channels
•
DTS Probe transmission range: 10m
Belt Receiver Re-Transmission range: up to 100 meters in
•
line-of-sight recordings
EMG Sensor Data Acquisition System
•
16-bit resolution
•
Sample rates 1,500 (for 16-channels) or
•
3,000 samples/second/channel (for 8 Channels)
•
Selectable low pass filter 500, 1000, 1500 Hz
EMG Preamplifier Leads
•
No notch (50/60 Hz) filters are used
•
1st order high-pass filters set to 10 Hz +/- 10% cutoff
•
Baseline noise < 1 uV RMS
•
Input impedance > 100 Mohm
•
CMR > 100 dB
•
Input range +/- 3.5 mV
•
Base gain 400
•
Snap-style or Pinch-style terminal electrode connections
Dimensions
•
EMG Probes Dimensions: 1.34" L x 0.95" W x 0.55" H (3.4
cm x 2.4 cm x 3.5 cm)
•
EMG Probes: Weight: Less than 14 g.
•
DTS Belt Receiver Dimensions: 12.6 cm L x 6.75 cm W x
2.38 cm H
•
DTS Belt Receiver Weight: Less than 185 g.
4
© 2008, Noraxon U.S.A. Inc.
P-5429 10/08 V4
Noraxon U.S.A. Inc. • 13430 N. Scottsdale Rd., Suite 104 • Scottsdale, AZ 85254
Tel: (480) 443-3413 • Fax: (480) 443-4327 • E-mail: info@noraxon.com • Web Site: www.noraxon.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising