Technical Bulletin
Bulletin #: V011312-01
Technical Bulletin
Issue Date: January 13, 2012
How to Remove the Turntable for Flex Models HPA,
HPD, LPA, and LPD
The procedure for removing the turntables on Flex models varies for each model. For the
“A” models, the mechanic must first disconnect the pneumatic hoses from the rotoseal in
the middle of the turntable. For the “D” models, the mechanic can simply remove the
three Allen bolts and lift. The procedure for each model is below:
Removing the HPA Turntable
1. Turn off the pneumatic supply and main power to the machine.
2. Using a 3/16” Allen wrench, remove the flat head Allen bolts in the middle of the
turntable.
3. Under the turntable, remove the top four pneumatic quick connects to the rotoseal.
4. Remove the three Allen bolts holding on the turntable.
5. Attach a 2000 lb. rated magnet to the center of the turntable.
6. Using a forklift, attach a chain or rated lifting strap to the magnet and slowly raise
the turntable.
7. Place the turntable on a flat surface.
Orion Packaging Systems * A division of Pro Mach
4750 County Road 13 NE Alexandria, MN 56308
(800) 333-6556 * www.support.orionpackaging.com
Page 1 of 4
Bulletin #: V011312-01
Technical Bulletin
Issue Date: January 13, 2012
Removing the LPA Turntable
1. Turn off the pneumatic supply and main power to the machine.
2. Using a 3/16” Allen wrench, remove the flat head Allen bolts holding on the
inspection plate.
3. Disconnect the top four pneumatic quick disconnects to the rotoseal.
4. Remove the three Allen bolts holding on the turntable.
5. Attach a 2000 lb. rated magnet to the center of the turntable.
6. Using a forklift, attach a chain or rated lifting strap to the magnet and slowly raise
the turntable.
7. Place the turntable on a flat surface.
Orion Packaging Systems * A division of Pro Mach
4750 County Road 13 NE Alexandria, MN 56308
(800) 333-6556 * www.support.orionpackaging.com
Page 2 of 4
Bulletin #: V011312-01
Technical Bulletin
Issue Date: January 13, 2012
Removing the HPD Turntable
1. Turn off the main power to the machine.
2. Remove the three Allen bolts holding on the turntable.
3. Attach a 2000 lb. rated magnet to the center of the turntable.
4. Using a forklift, attach a chain or rated lifting strap to the magnet and slowly raise
the turntable.
5. Place the turntable on a flat surface.
Orion Packaging Systems * A division of Pro Mach
4750 County Road 13 NE Alexandria, MN 56308
(800) 333-6556 * www.support.orionpackaging.com
Page 3 of 4
Bulletin #: V011312-01
Technical Bulletin
Issue Date: January 13, 2012
Removing the LPD Turntable
1. Turn off the main power to the machine.
2. Remove the three Allen bolts holding on the turntable.
3. Attach a 2000 lb. rated magnet to the center of the turntable.
4. Using a forklift, attach a chain or rated lifting strap to the magnet and slowly raise
the turntable.
5. Place the turntable on a flat surface.
Orion Packaging Systems * A division of Pro Mach
4750 County Road 13 NE Alexandria, MN 56308
(800) 333-6556 * www.support.orionpackaging.com
Page 4 of 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising