Micro-HDMI to HDMI over Cat5/Cat6 Active Extender Kit, 1080p

Micro-HDMI to HDMI over Cat5/Cat6 Active Extender Kit, 1080p
Micro-HDMI to HDMI over Cat5/Cat6 Active Extender
Kit, 1080p @ 60 Hz, USB Powered, Up to 125-ft., TAA
MODEL NUMBER: B126-1A1-U-MCRO
Highlights
Supports high-definition video
resolutions up to 1080p (@ 60
Hz)
Supports stereo audio and HDCP
Works with all operating systems
and HDMI sources
Plug and play—no software,
drivers or external power supply
Built-in equalization control lets
you adjust monitor image
System Requirements
Laptop, Ultrabook™, tablet or
other source with Micro-HDMI
port
Display with HDMI port
Package Includes
Description
Transmitter unit
The B126-1A1-U-MCRO Micro-HDMI to HDMI over Cat5/Cat6 Active Extender Kit includes a transmitter unit
Receiver unit
and a receiver unit that work in tandem to extend an HDMI audio/video signal from a Micro-HDMI source to an
(2) USB Micro-B to USB-A
HDMI projector, monitor or television. The kit is ideal for digital signs, trade shows, presentations, classrooms,
cables, 3 ft.
churches, retail settings and other applications where the video source is located farther than conventional
Screwdriver for adjusting
cables allow.
equalization
Owner’s manual
The transmitter’s built-in Micro-HDMI cable connects to the audio/video source, and the receiver’s built-in HDMI
cable connects to the display. Cat5e/6 cable connects the two units (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series).
Each unit is powered by an included USB Micro-B to USB-A cable, which must be connected between the unit and a USB port on the source, display or USB
wall charger. You can also connect an optional HDMI monitor to the transmitter’s local port with a user-supplied HDMI cable, such as Tripp Lite’s P568-Series.
The B126-1A1-U-MCRO can extend a 1080p (@ 60 Hz) signal up to 125 feet with full, rich stereo. Built-in RJ45 LEDs indicate the units are receiving power
and a signal from the source. Built-in equalization control lets you fine-tune the image quality at each remote display. Easy to set up with no software or drivers
to install. Works with all operating systems and HDMI sources.
Features
Extends HDMI Audio/Video Signals to an HDMI Display
Extends a 1080p (@ 60 Hz) signal up to 125 ft.
Ideal for digital signs, trade shows, presentations, classrooms, churches and retail settings
Transmitter and receiver connect with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series)
Supports stereo audio and HDCP
Built-in equalization control lets you adjust the image on the remote display
Easy to Set Up and Use
Plug-and-play engineering—no software, drivers or external power supply
Powered via included USB cables
1/3
Powered via included USB cables
Units connect quickly to source and display with built-in cables
Optional local HDMI monitor connects to transmitter with user-supplied HDMI cable
LEDs indicate when units are receiving power and a signal from the source
Works with all operating systems and HDMI sources
TAA-Compliant
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Specifications
PHYSICAL
Color
Black
COMMUNICATIONS
Max 1024 x 768 Range (ft)
125
Max 480P Range (ft)
125
Max 1440 x 900 Range (ft)
125
Max 1080i Range (ft)
125
Max 1080P Range (ft)
125
Max 480i Range (ft)
125
Max 640 x 480 Range (ft)
125
Max 800 x 600 Range (ft)
125
Max 1600 x 1200 Range (ft)
125
Max 720P Range (ft)
125
CONNECTIONS
Ports
1
Side A - Connector 1
MICRO HDMI (MALE)
Side A - Connector 2
RJ45 (FEMALE)
Side A - Connector 3
USB A (MALE)
Side B - Connector 1
HDMI (MALE)
Side B - Connector 2
RJ45 (FEMALE)
Side B - Connector 3
USB A (MALE)
WARRANTY
2/3
Product Warranty Period (Worldwide)
1-year limited warranty
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
3/3
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Tripp Lite:
B126-1A1-U-MCRO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising