10/100Base-TX Industrial Ethernet Extender

10/100Base-TX Industrial Ethernet Extender
www.signamax.eu
10/100Base-TX Industrial Ethernet Extender
065-1138
OVERVIEW
The 065-1138 is a point-to-point Ethernet Extender that efficiently
extends 10/100 Ethernet circuits to over 300meters (984feet) at
50Mbits using existing straight pair copper wire. The 065-1138 will
allow Ethernet connectivity in existing facilities without pulling
extra cable. This is the perfect solution to Ethernet on the factory
floor where systems have been upgraded from slower serial
communications to Ethernet networking. Installation is easy
with a single switch setting, one end is set for local and the
other remote. The 065-1138 is used in pairs to extend Ethernet
connectivity over existing voice grade copper wire.
FEATURES
•
•
•
•
Operates transparent to higher layer protocols such
as TCP/IP
Ethernet Port: 10/100Mbps-Full/Half-duplex, AutoNegotiation,
Auto-MDI/MDIX
Ethernet Extender(RJ-11) Port: Symmetrical on the
VDSL, High-speed Full-duplex 50Mbps communications
link over existing copper Telephone line
•
•
•
•
•
•
•
Support DIP switch to select Local or Remote side
Ten speeds with speed indicator LEDs on top of unit,
Up to 50Mbps @ about 300meters (984ft.),
Down to 1Mbps @ about 1,900meters (6,232ft.)
-20°C to 60°C (-4°F to 140°F) operating
temperature range
Hardened aluminum case
Supports DIN-Rail, Wall Mounting installation
ORDERING INFORMATION
065-1138 10/100Base-TX Industrial Ethernet Extender
DIAGRAMS
1
www.signamax.eu
SPECIFICATIONS
Technology
LED Indicators:
•
•
•
•
•
Standards: IEEE802.3 10Base-T, IEEE802.3u 100Base-TX,
IEEE802.3x, Ethernet over VDSL
Protocols: Transparent to higher layer protocols
Processing Type: Half-duplex back-pressure and
IEEE802.3x Full-duplex flow control
Per Unit: Power Status (Power)
Per Port: 10/100TX: Link/Activity, Full-duplex
Line: Error, Link, Local, Remote
LED
Power
•
•
1
Input: Input Voltage: 12VDC
Power Consumption: 2.4W Max. 0.2A@12VDC
2
Mechanical
•
•
•
•
Casing: Aluminum case
Dimensions: 80.3mm (W) x 109.2mm (D) x 23.8mm (H)
(3.16" (W) x 4.30" (D) x 0.94" (H))
Weight:150g (0.33lb.)
Installation: DIN-Rail, Wall Mounting
3
4
Interface
•
•
•
Ethernet Port:
Port: One RJ-45 port, 10/100Base-TX Full/Half-duplex
Auto-Negotiation, Auto-MDI/MDIX
Speed: 10/100Mbps
Distance: 100meters (328ft.)
Cable: 10Base-T: UTP CAT. 3, 4, 5 (2-pair wire)
100Base-TX: UTP CAT. 5 (2-pair wire)
Ethernet Extender Port:
Port: One RJ-11 Port
Speed: 1/3/5/10/15/20/25/30/40/50mbps
Distance: 1900meters (6,232ft.)
Cable: Telephone line 24 AWG (0.5mm diameter,
1-pair wire) or larger
DIP switch:
One DIP switch: Local (CO) or Remote (CPE)
SPEED
DISTANCE
Green
1Mbps
1,900m (6,232 ft.)
Amber
3Mbps
1,800m (5,904 ft.)
Green
5Mbps
1,600m (5,249 ft.)
Amber
10Mbps
1,400m (4,593 ft.)
Green
15Mbps
1,200m (3,936 ft.)
Amber
20Mbps
1,000m (3,280 ft.)
Green
25Mbps
800m (2,624 ft.)
Amber
30Mbps
700m (2,296 ft.)
4&2
Amber
40Mbps
600m (1,968 ft.)
4&3
Amber
50Mbps
300m ( 984 ft.)
NOTE: All speed selections are Symmetrical on the DSL
and Full-duplex on the Ethernet.
Environment
•
•
•
Operating Temperature: -20°C to 60°C (-4°F to 140°F)
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
Ambient Relative Humidity: 5% to 95%
(non-condensing)
Regulatory Approvals
•
•
•
ISO: Manufactured in an ISO9001 facility
Safety: UL60950-1
Emission Compliance: FCC Part 15 CE Mark Class A
ĺĥãðĂĂīÙ
¯¥ðĂĂ
¯¥ðĂĂ
¯¥ðæã
¯¥ðæã
ĺĥãðĤæĺã
ĺĥãðĤæĺã
±ØôØĉïÿüØħ§ñüØ
š±ħãħ¹ÀôØħċĂĺĺ÷ČċīİÙáĩĎČ
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising