Antenna Overview
Antenna Overview
Version 3.6
2015/11/12
Contents
ANT-RSMA-Omni Set Order No.: 5510000397 ..................................................................................... 3
Antenna-Kit II WOx003n Order No.: 5520000145 ................................................................................ 4
ANT-Omni-vehicle-1.2m
Order No.: 600519 ................................................................................... 5
ANT-RTNC.S-O-STD-2+5G
ANT-Omni-5-2G-1.2m
ANT-Omni-8-Dual
Order No.: 600487 ............................................................................. 6
Order No.: 600518....................................................................................... 7
Order No.: 5510000234 .................................................................................... 8
ANT-N-11-5G-dualpol for 802.11n Bridge Links
Order number: 5500001542 .................................. 9
ANT-N-20-5G-dualpol for 802.11n Bridge Links
Order number: 5500000551 ................................. 10
ANT-N-D-13/15-dual
ACC-EMP-N-dual
Order No.: 600513 ....................................................................................... 11
Order No.: 600499 ............................................................................................ 12
Low-Loss antenna cables ..................................................................................................................... 13
Page 2
ANT-RSMA-Omni Set
Order No.: 5510000397
Description :
This antenna features omni directional radiation and has a gain of 5 dBi und fits perfect to Access Point and
WLAN router there installed at unfavorable places. The cable with 1,5 m length allow the direct connection to
devices with RSMA plug, i.e. z.B. WI1003n, W2003n-ext, be-ip, RS-Serie.
The magnetic base has 60 mm diameter and simplified placement at a suitable location. For optimizing the
radiation the antenna can be bend up to 90°. We ship this antenna in set of two antennas, perfect for
802.11n devices with to antenna connectors.
Features:
Item
Order No.
Frequency band
Polarization
Gain
Cable lenght
Cable
Connector
Stand
Total height
Color
ANT-RSMA-Omni Set
5510000397
2400 MHz –2500 MHz
Linear vertical, omni
5dB without cable, include cable approx. 2-3 dBi
1,5 m
RG-174 (high flexible)
RSMA socket
60 mm diameter with magnet base
216 mm, in bended state approx. 64 mm
Black
Page 3
Antenna-Kit II WOx003n
Order No.: 5520000145
Description :
This antenna features omni directional radiation and has a gain of 2 dBi. The antenna is fitted with a N-plug
connector and can without any adaptor cable directly mounted at a Outdoor Access Point WO1003n /
WO2003n. The antenna has the protection class IP65 (waterproof) and can therefore be used indoor and
outdoor s.
It is particularly suitable for vehicle mounting. Using its 1.2 m cable, it can be connected directly. If required,
the cable can be extended with optionally available RTNC cables. With the help of an adapter to RSMA, this
antenna can also be operated at devices with RSMA jack. For optimum operation, this antenna requires a
metallic surface of at least 40 cm x 40 cm, such as a vehicle roof. This antenna is waterproof and can both
indoors and outdoors. The antenna has a swivel can be bend up to 90° to adapt the antenna to the
surrounding. We ship this antenna in a set of two antennas.
Features:
Item
Order No.
Frequency band
Polarization
Gain
Connector
Total height
Color
Antenna-Kit II WOx003n
5520000145
2400 MHz –2500 MHz / 4900 MHZ -5900 MHZ
Linear vertical, omni
Approx. 2 dB
N-plug
142 mm, in bended state approx. 112mm
White
Page 4
ANT-Omni-vehicle-1.2m
Order No.: 600519
Description:
This antenna features omni directional radiation and has a gain of 5 dBi. It is particularly suitable for vehicle
mounting. Using its 1.2 m cable, it can be connected directly. If required, the cable can be extended with
optionally available RTNC cables. With the help of an adapter to RSMA, this antenna can also be operated at
devices with RSMA jack. For optimum operation, this antenna requires a metallic surface of at least 40 cm x
40 cm, such as a vehicle roof. This antenna is waterproof and can therefore be used both indoors and
outdoors.
Features:
Item
Order No.
Frequency band
Polarization
VSWR
Gain
Cable length
Connector
Hole diameter
Height
Depth
Color
ANT-Omni-vehicle-1.2m
600519
2400 MHz –2500 MHz
Linear, vertical
< 1.5
4 dBi (cable loss included)
1.2 m
RTNC plug
12mm
95mm
Approx. 15mm
Black
Page 5
ANT-RTNC.S-O-STD-2+5G
Order No.: 600487
Description:
This antenna is a replacement standard antenna for devices with RTNC connector, such as
W1002n or Wi-Serie,. It is swivel-mounted and can easily be adjusted to the desired position.
Features:
Item
Order No.
Range
Frequency band
VSWR
Gain
Connector
Dimensions
Color
Operating temperature
Storage temperature
ANT-RTNC.S-O-STD-2+5G
600487
Line of sight approx. 300 m, indoors approx. 30 m
2400 MHz –2500 MHz / 4900 MHZ -5900 MHZ
< 2.0
1.7 dBi
RTNC plug
approx. 14.5 cm x 1.5 cm
Black
-20 °C to +65 °C
-30 °C to +75 °C
Page 6
ANT-Omni-5-2G-1.2m
Order No.: 600518
Description:
This antenna features omnidirectional radiation and has a gain of 5 dBi. The antenna is equipped with a
cable length of 1.2 m and can thus be positioned at some distance from the access point in order to
improve the transmission and reception properties and to make optimum use of the antenna diversity. If the
1.2 m cable is not long enough, it can be extended with optionally available RTNC cables. With the help of
an adapter to RSMA, this antenna can also be operated at devices with RSMA jack. This antenna is
waterproof and can therefore be used both indoors and outdoors, e.g. to service an outdoor area. The
scope of delivery includes mounting kits for wall, mast, and window mounting.
Features:
Item
Order No.
Frequency band
Range
Polarization
VSWR
Gain
Cable length
Connector
Weight, dimensions
Color
Operating temperature
Storage temperature
ANT-Omni-5-2G-1.2m
600518
2400 MHz –2500 MHz
Line of sight approx. 500 m, indoors approx. 40 m
Linear, vertical
< 2.0
4 dBi (cable loss included)
1.2 m
RTNC plug
approx. 800 g, 33 cm x 1.9 cm
White
-40 °C to +80 °C
-40 °C to +80 °C
330
Page 7
ANT-Omni-8-Dual
Order No.: 5510000234
Description:
This antenna is an Indoor/Outdoor antenna for 2.4 GHz and 5 GHz. The antenna is suitable for
smaller distances up to several hundred meters, depending on the desired data rate. It must be used
with the over voltage protector ACC-EMP-N-dual.
Frequency range
Gain
VSWR
Impedance
Polarization
HPBW / horizontal
HPBW / vertical
Power Handling
2400-2500 MHz
4900-5470 MHz
8dBi
2,0:1 max
50 Ohm
Linear vertical
360°
15°
5W (CW)
Connector
N female
Survival wind speed
Temperature
Humidity
Color
Material
Weight
Dimensions
216 km/h
-40°C bis + 70°C
95%@25°C
White gray
ABS, UV resistant
350g
81 * 78 * 870 mm
H-plane, Max. Gain = 8dBi, Omni
E-plane, Max. Gain = 8dBi, -3dB
Beamwidth=15 Grad
Page 8
ANT-N-11-5G-dualpol for 802.11n Bridge Links
Order number: 5500001542
Description:
This 5 GHz Dual Polarization antenna is suitable for directional links in combination with 802.11n units
there transmit two streams. The antenna contain two independent antenna systems, the polarization of
these systems are 90º twisted again each other. It has a gain of 11-12 dBi and a beam angle of 34°,
which permits targeted transmission. The antenna is very small and fits perfect for various application,
the performance is good enough for short and medium distances. The antenna has two N jack
connectors. Shipment is including wall mounting and a simplified pole mounting.
Features:
Item
Order No.
Frequency band
Polarization
Gain
3 dB horizontal beam angle
3 dB vertical beam angle
Front to back ratio
Max. power
Weight/Dimensions
Mounting
Connector/Cable
Color
Material
Operating temperature
Storage temperature
IP safety class
Remark:
ANT-N-11-5G-dualpol
5500001542
5150 - 5875 MHz
Linear, vertical and horizontal
11-12 dBi
36°
34°
> 20 dB
6 W (CW) at 25 °C
236g / 122 x 122 x 47 mm
Wall mounting or pole mounting by hose clamp
N-Jack / RG223, 150 mm
Light gray
Plastic
-40 °C bis +70 °C
-40 °C bis +70 °C
IP65
This antenna has two antenna sockets, therefore you need two
sets of cable and surge adaptors.
Page 9
ANT-N-20-5G-dualpol for 802.11n Bridge Links
Order number: 5500000551
Description:
This 5 GHz Dual Polarization antenna is suitable for directional links in combination with 802.11n units
there transmit two streams. The antenna contain two independent antenna systems, the polarization of
these systems are 90º twisted again each other. It has a gain of 20 dBi and a beam angle of 10°, which
permits targeted transmission. At the full transmission rate of 300 Mbps PHY rate, up to 800 m can be
covered, and at a rate of 150 Mbps, up to approximately 2 km can be covered. Due to its compact and
flat shape, it is unobtrusive and easy-to-mount. The antenna has two N jack and can thus be connected
to a W1002n or Wi-Series by using the particularly low-loss cables. Shipment is including pole and wall
mounting.
Features:
Item
Order No.
Frequency band
Polarization
Gain
3 dB horizontal beam angle
3 dB vertical beam angle
Front to back ratio
Max. power
Side-lobe suppression
Weight, dimensions
Pole Mounting
Color
Material
Operating temperature
Storage temperature
IP safety class
Remark:
ANT-N-20-5G-dualpol
5500000551
5100 - 5900 MHz
Linear, vertical and horizontal
20,6 dBi at 5100 MHz, 19,5 dBi at 5500 MHz 19 dBi at 5900 MHz
10°
10°
> 30 dB
6 W (CW) at 25 °C
ETSI EN 302 085 Range 1 TS1 - TS3
1,5 kg, 320 x 320 x 20 mm
Suitable for poles from 48-80 mm Ø
Light gray
Plastic
-40 °C bis +70 °C
-40 °C bis +70 °C
IP 67
This antenna has two antenna sockets, therefore you need two
sets of cable and surge adaptors.
Page 10
ANT-N-D-13/15-dual
Order No.: 600513
Description:
This antenna is a component of an antenna solution for 2.4 GHz and 5 GHz point-to-point connections for
coupling sites via WLAN. Due to its special characteristics, it can be used in either of the two frequency
bands by merely switching the frequency at the W1002n or the WI series. This means that the user can
freely select the frequency band he or she prefers, e.g. if there are interfering applications in the 2.4 GHz
band. The antenna is small and light and thus suitable for smaller distances of approx. 0.5 to 1 km,
depending on the desired data rate and frequency band. Include wall and pole mounting unit.
Features:
Item
Order No.
Range
Frequency band
Gain
VSWR
Polarization
HPBW / horizontal
HPBW / vertical
Front-to-back ratio
Tilt angle
Power consumption
Impedance
Connector
Weight, dimensions
Color
Material
Operating temperature
Humidity
Max. wind speed
ANT-N-D-13/15-dual
600513
Please refer to the Solution Sheet for outdoor antenna solutions
2400 MHz –2500 MHz
4900 MHz - 5875 MHz
13.5 dBi
15.5 dBi
< 2.0
< 2.0
Linear, vertical
Linear, vertical
30°
15°
30°
15°
15 dB
0°
10 W (cw)
50 Ohms
N jack
407 g, 200 x 218 x 50 mm
Light gray
ABS, UV-resistant
-40 °C to +80 °C
95 % @ 25 °C
216 km/h
Page 11
ACC-EMP-N-dual
Order No.: 600499
Description:
This overvoltage protector is used to largely prevent overvoltages from the outside
from harming the electronics and the network, e.g. in the case of a thunderstorm. It is
designed for up to 6 GHz and can therefore easily be used for systems from 2 GHz
to 5 GHz. With its N plug and N jack, it can be placed between the RTNC-N cable
and other N cables. The overvoltage protector should be mounted at the transition
point to the building and must be sufficiently earthed.
Insertion loss: 0.4 dB at 2.4 GHz, 0.7 dB at 5.5 GHz
Funkwerk N plug to N B/H jack surge arrester
VSWR[1]
SA13B2
5.88 GHz
1.15
2.4 GHz
1.18
1.5
5.88 GHz
1.25
1
1
0
1
2
3
Frequency (GHz)
4
5
0
6
Funkwerk N plug to N B/H jack surge arrester
-0.5
2.5 GHz
-0.236
-1
-1.5
5.88 GHz
-0.423
DB(|S[2,1]|)
SA13B2
1
2
3
Frequency (GHz)
4
5
6
Funkwerk N plug to N B/H jack surge arrester
0
Insertion Loss[S12](dB)
0
Insertion Loss[S21](dB)
VSWR[2]
SA13B2
2.39 GHz
1.18
1.5
Funkwerk N plug to N B/H jack surge arrester
2
VSWR[S22]
VSWR [S11]
2
-0.5
2.49 GHz
-0.18
5.88 GHz
-0.41
-1
-1.5
DB(|S[1,2]|)
SA13B2
-2
-2
0
1
2
3
Frequency (GHz)
4
5
6
0
1
2
3
Frequency (GHz)
Page 12
4
5
6
Low-Loss antenna cables
The antenna cables made from Low-Loss
ULA400 coaxial cables and suitable for
outdoor installations. The cables meet the
demand of the bintec Access Points and
antennas. The connectors are mounted with
water protected shrink material.
Attenuation**
Order
number
Description
Specification
Typical application
5500001541
CAB-RSMA-N-0,5m ***
RSMA Plug N Plug
W2003n-ext to ANT-N-11-5G or adaptor cable to CAB-N
1,5 dBm
2,0 dBm
5500001764
Cable CAB-N-N-0,5m
N Plug N Plug
Allow the connection of antennas with N socket to WO-Series
devices
0,7 dBm
1,2 dBm
600505
CAB-RSMA-RTNC-0,2m
RSMA Plug RTNC Jack
RS-Serie to ANT-Omni-5-2G-1,2m
0,5 dBm
0,9 dBm
600501*
CAB-RTNC-3m
RTNC Plug RTNC Jack
W1002n/WI-Serie to ANT-Omni-5-2G-1,2m
1,0 dBm
1,8 dBm
600507
CAB-RTNC-N-0,5m
RTNC Plug N Plug
WI1065n to a ANT-N-20-5G Dual Polarization or as adaptor
cable from W1002n/WI-Serie to CAB-N
0,7 dBm
1,2 dBm
5500000846
CAB-N-3m
N Plug N Jack
N-N- Extension cable
1,1 dBm
1,6 dBm
5500000847
CAB-N-6m
N Plug N Jack
N-N- Extension cable
1,8 dBm
2,7 dBm
5500000848
CAB-N-9m
N Plug N Jack
N-N- Extension cable
3 dBm
4 dBm
2,4 GHz
* As long as on stock
** Attenuation values are only approximately
*** High flexible ULA198 cable
bintec-elmeg GmbH - Suedwestpark 94
90449 Nuremberg, Germany
Phone: +49-911 9673 - 0
Fax: +49-911 688 07 25
E-mail: info@bintec-elmeg.com - www.bintec-elmeg.com
Antenna Overview
Subject to technical changes
Page 13
5 GHz
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising