615 indicator - Avery Weigh

615 indicator - Avery Weigh
Flexible weight
indicator for advanced
Technical Specification
IP69K Stainless Steel Enclosure
Graphic Display
IP66 Stainless Steel Enclosure
Graphic Display
This high performance, multi-function indicator provides the flexibility to adapt to the most demanding applications. The
addition of a larger 320 x 160 display helps to improve usability. This large display provides an increased area to show more
user prompts and graphics.
Suitable for the office, dusty, wet or high pressure and heavy washdown environments, these indicators can display, analyze,
store, and transmit data across a range of technology methods to meet your specific installation.
Unit of Measure
Four active choices (Kilograms, Ounce, Gram, Pounds, Pound/Ounce, Ton, Tonne, Custom)
Capacity Selections
9,999,999 with decimal located zero to five places
Incremental Selections
Multiples and sub-multiples of 1, 2, 5
Up to three independent weight ranges and divisions
Programmable Selections
Zero range, motion detection, automatic zero tracking, eight point linearization
Time and Date
Battery backed up time/date/year (12 hour AM/PM or 24 hour format)
Two to ten points
Analog to Digital Measurement Rate
100 Hz
Internal Resolution
67,108,864 counts per mV/V per second
Digital Filtering
Harmonizer™ filtering with adaptable constant and threshold
Self Diagnostics
Display, keys, inputs, outputs, serial port, scale A to D, USB port and option cards
Dynamic Weighing
Minimum nominal weigh time 100 milliseconds, recommended minimum three hundred
Programming Language
Avery Weigh-Tronix Lua, GSE Macro
Technical Specification
ZM615 has a 29 key chemical resistant keypad with metal domed tactile feedback and audio confirmation when
Operational Keys
Zero, Print, Units, Tare, Sample, Setup, ID, Scale, Target, 5 Function Keys (F1-F5), Select, Start, Stop, 0-9, Alpha,
Decimal, Clear and Common Symbols
Status Annunciators
Center of Zero, Motion, Battery status, Preset Tare, Active Ethernet Connection, Unit of Measure and more are
shown on the dot matrix display
Improved Super Twisted Nematic (ISTN) Graphic Display: the green illuminated with black background
320 x 160 pixel display provides wide viewing angles and high brightness. Pixels can be organized on the
display to create personalized Human Machine Interface messages and images. A mode selection allows the
image to be displayed in reverse image for applications that would benefit from dark characters with a clear/
light contrasted background.
Display Rate
Selectable (1, 2, 5, 10, 20) times per second
Dot Graphic Display Adapts to Meet the Solution
Stainless steel desktop: 304 brushed stainless steel (IP69K certified) with GORE® Vent ventilation and tilt stand with
provisions for desk, wall and column mounting
Stainless steel panel mount: Stainless steel with easy access to interface connections
Operating Temperature
14° F to 104° F / -10° C to 40° C (Compliance with legal for trade requirements)
-4° F to 140° F / -20° C to 60° C (Industrial)
10 to 90% humidity non condensing
Shipping Weight
Stainless steel desktop: 12.4 lb (5.62 kg)
Stainless steel panel mount: 11 lb (5 kg)
Dimensions (L x W x H)
Stainless steel desktop: 11.88” x 5.5” x 10.75” (301.69 mm x 139.70 mm x 273.05 mm)
Stainless steel panel mount: 11.56” x 3.6” x 9.25” (293.69 mm x 91.60 mm x 234.95 mm)
.53 [13.49 mm]
10.50 [266.70 mm]
3.53 [89.69 mm]
11.88 [301.77 mm]
3.73 [94.64 mm]
10.50 [266.70 mm]
4X R1.00 [R25.40 mm]
5.60 [142.27 mm]
8.25 [209.55 mm]
9.25 [234.95 mm]
10.75 [273.05 mm]
2.65 [67.28 mm]
.50 [12.70 mm]
1.03 [26.12 mm]
3.61 [91.60 mm]
11.56 [293.69 mm]
10.68 [271.29 mm]
5.50 [139.70 mm]
Remote Inputs
Three TTL or voltage free logic level inputs can be received for basic key functions or application program events
Standard Outputs
Three outputs can be used for system variable setpoints or in combination with application program events
Serial Ports (3)
Three serial ports:
- Comm 1 RS232 full duplex
- Comm 2 RS232 full duplex
- Comm 3 RS232 full duplex
Manual and Autoprint function
Supports SMA, ENQ and NCI command
response protocols and broadcast
Supports BSQ digital bench base
USB Host (2)
Two USB Host ports for:
›› Printer
›› USB flash memory
›› Remote USB keyboard
The Ethernet port can be configured to support ten independent devices. It supports DHCP, UDP Sockets, TCP/IP
(client or server), embedded web server, email, SMA, NCI, FTP, ENQ and Broadcast.
Ethernet/IP™ and Modbus-TCP
Or - Comm 1 RS232 Full duplex with handshaking
- Comm 2 RS232 Not available
- Comm 3 RS232 Full duplex with handshaking
Power Requirements
Line voltage: 90-264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 300mA at 12VDC for one 350 ohm weight sensor and 650mA at 12VDC for fourteen
350 ohm weight sensors
10 VDC (+/-5 VDC), short circuit protected
Supports up to thirty two 350 ohm weight sensors (four scales)
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range
-1 m/V/V to 5 mV/V
Analog Signal Sensitivity
0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
Circuitry Protection
RFI, EMI and ESD protection (10 V/m minimum RFI noise immunity)
Technical Specification
Option Kits (maximum
four internal options)
Analog output kit: 0-5 VDC, 0-10 VDC and 4-20 mA
Current loop kit: Current loop and RS232/RS422
USB device kit: Provides USB interface to PC (virtual comm Port)
Device Net™
Wireless (Ethernet) internal kit: 802.11b/g wireless data communications kit with antenna
Internal 120 VAC Relay module for IP69K model
Scale Input 5 VDC excitation
Scale Input 10 VDC excitation with STVS kit
External I/O interface kit
DC Output, 4 relays 3-60VDC at 2A Kit
DC Input, 4 Inputs 4-30VDC kit
AC Output, 4 relays 20-240VAC at 1A kit (IP69K models)
AC Input, 4 Inputs 120-240VAC kit (IP69K models)
Severe Transient Voltage Suppressor (STVS)
Provides 3 inputs and/or 3 outputs, external G4 interface modules
USB Watertight Gland
Rubberized and sealed
Ethernet Watertight Gland
Rubberized and sealed
US Patent 672,262
NTEP (US) Class III/IIIL 10,000d (CC# 14-039)
Measurement Canada class III/III HD (AM-5955C)
Canada Approved
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2017 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.
V1 AWT35-501686
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF