MicroEDGE Pro CNC Replacement Parts FSB 807310

MicroEDGE Pro CNC Replacement Parts FSB 807310
®
MicroEDGE Pro CNC
Replacement Parts
Field Service Bulletin
807310
| Revision 3
|
November 2015
Hypertherm Inc.
Etna Road, P.O. Box 5010
Hanover, NH 03755 USA
603-643-3441 Tel (Main Office)
603-643-5352 Fax (All Departments)
info@hypertherm.com (Main Office Email)
800-643-9878 Tel (Technical Service)
technical.service@hypertherm.com (Technical Service Email)
800-737-2978 Tel (Customer Service)
customer.service@hypertherm.com (Customer Service Email)
866-643-7711 Tel (Return Materials Authorization)
877-371-2876 Fax (Return Materials Authorization)
return.materials@hypertherm.com (RMA email)
Hypertherm Plasmatechnik GmbH
Technologiepark Hanau
Rodenbacher Chaussee 6
D-63457 Hanau-Wolfgang, Deutschland
49 6181 58 2100 Tel
49 6181 58 2134 Fax
49 6181 58 2123 (Technical Service)
Hypertherm (S) Pte Ltd.
82 Genting Lane
Media Centre
Annexe Block #A01-01
Singapore 349567, Republic of Singapore
65 6841 2489 Tel
65 6841 2490 Fax
65 6841 2489 (Technical Service)
Hypertherm (Shanghai) Trading Co., Ltd.
Unit 301, South Building
495 ShangZhong Road
Shanghai, 200231
PR China
86-21-60740003 Tel
86-21-60740393 Fax
Hypertherm Europe B.V.
Vaartveld 9
4704 SE
Roosendaal, Nederland
31 165 596907 Tel
31 165 596901 Fax
31 165 596908 Tel (Marketing)
31 165 596900 Tel (Technical Service)
00 800 4973 7843 Tel (Technical Service)
Hypertherm Japan Ltd.
Level 9, Edobori Center Building
2-1-1 Edobori, Nishi-ku
Osaka 550-0002 Japan
81 6 6225 1183 Tel
81 6 6225 1184 Fax
Hypertherm Brasil Ltda.
Rua Bras Cubas, 231 – Jardim Maia
Guarulhos, SP - Brasil
CEP 07115-030
55 11 2409 2636 Tel
55 11 2408 0462 Fax
Hypertherm México, S.A. de C.V.
Avenida Toluca No. 444, Anexo 1,
Colonia Olivar de los Padres
Delegación Álvaro Obregón
México, D.F. C.P. 01780
52 55 5681 8109 Tel
52 55 5683 2127 Fax
Hypertherm Korea Branch
#3904 Centum Leaders Mark B/D,
1514 Woo-dong, Haeundae-gu, Busan
Korea, 612-889
82 51 747 0358 Tel
82 51 701 0358 Fax
© 2015 Hypertherm Inc. All rights reserved.
EDGE and Hypertherm are trademarks of Hypertherm Inc. and may be registered in the United States and/or other countries. All other trademarks are
the property of their respective holders.
One of Hypertherm's long-standing core values is a focus on minimizing our impact on the environment. Doing so is critical to our, and our customers',
success. We are always striving to become better environmental stewards; it is a process we care deeply about.
Contents
Introduction ........................................................................................................................................................................................ 5
Part locations ..................................................................................................................................................................................... 6
Common MicroEDGE Pro parts ............................................................................................................................................ 6
Picopath MicroEDGE Pro parts ............................................................................................................................................ 8
HyPath MicroEDGE Pro parts ............................................................................................................................................... 9
SERCOS II and SERCOS III MicroEDGE Pro parts ..................................................................................................... 10
Replacing parts .............................................................................................................................................................................. 11
Accessing parts ..................................................................................................................................................................... 11
Replacing common MicroEDGE parts ..................................................................................................................................... 12
Surge PCB (228812) ........................................................................................................................................................... 12
HASP hardware key (228813) ........................................................................................................................................... 12
Hard drive (228814) ............................................................................................................................................................. 13
Power distribution PCB (228815) .................................................................................................................................... 13
Motherboard (228820) ........................................................................................................................................................ 14
Analog PCB (228822) ......................................................................................................................................................... 18
USB cable (228823) ............................................................................................................................................................ 18
AC input module (228824) ................................................................................................................................................. 19
Power switch (228825) ....................................................................................................................................................... 20
Internal or external fan (228826) ....................................................................................................................................... 21
Power supply (228827) ....................................................................................................................................................... 22
Wireless PCB and antenna (228836) .............................................................................................................................. 23
Replacing Picopath MicroEDGE parts ..................................................................................................................................... 24
2- and 4-Axis MCC, utility, and serial interface PCB (228838 and 228817) ........................................................ 24
2- and 4-Axis servo PCB (228839 and 228834) ......................................................................................................... 24
Analog breakout PCB (228847) ........................................................................................................................................ 25
MicroEDGE Pro CNC Field Service Bulletin
807310
3
Contents
Replacing HyPath MicroEDGE parts .........................................................................................................................................26
4-Axis MCC, utility, and serial interface PCB (228817) ...............................................................................................26
24 I/O PCB (228819) ...........................................................................................................................................................26
4-Axis servo PCB (228818) ................................................................................................................................................27
Analog breakout PCB (228847) ........................................................................................................................................28
Replacing SERCOS II and SERCOS III MicroEDGE parts .................................................................................................29
SERCOS II and SERCOS III utility and serial isolation PCB (228816) ....................................................................29
SERCOS II PCI master (228821) ......................................................................................................................................30
SERCOS III PCI master (428072) .....................................................................................................................................30
Test plugs and kits .........................................................................................................................................................................31
Common test plugs ................................................................................................................................................................31
Picopath test plugs ........................................................................................................................................................................32
Hypath test plugs ...........................................................................................................................................................................33
4
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
Introduction
WARNING!
ELECTRIC SHOCK CAN KILL
Disconnect electrical power before performing any maintenance.
All work requiring removal of the power supply cover must be performed by
a qualified technician.
See the safety information provided with your product for more safety
precautions.
This FSB is provided with the following kits. Replacement instructions for each kit are included in this FSB.
Kit Number
Description
228812
Kit: Surge PCB, 230 V
228813
Kit: HASP hardware key
228814
Kit: Hard drive, 250 GB, SATA
228815
Kit: Power distribution PCB
228816
Kit: SERCOS II utility, and serial isolation PCB
228817
Kit: 4-Axis MCC, utility, and serial isolation PCB (Picopath, HyPath)
228818
Kit: 4-Axis servo PCB (HyPath)
228819
Kit: 24 I/O PCB (HyPath)
228820
Kit: Motherboard
228821
Kit: SERCOS II PCI master
228822
Kit Analog PCB (Sensor THC-equipped configurations only)
228823
Kit: USB cable, 0.5 m (20 in)
228824
Kit: AC input module
228825
Kit: Power switch
228826
Kit: Internal or external fan, 12 V
228827
Kit: Power supply, ATX, 1 U, 400 W
228834
Kit: 4-Axis servo, 5 V encoder PCB (Picopath)
228836
Kit: Wireless network PCB and antenna
228838
Kit: 2-Axis MCC, utility, and serial isolation PCB (Picopath)
228839
Kit: 2-Axis servo, 5 V encoder PCB (Picopath)
228847
Kit: Analog breakout PCB (Picopath, Hypath)
428072
Kit: SERCOS III PCI master
MicroEDGE Pro CNC Field Service Bulletin
807310
5
MicroEDGE Pro CNC Replacement Parts
Part locations
Common MicroEDGE Pro parts
3
1
4
5
2
7
8
9
6
Item
6
Part Number
Description
Qty.
1
228836
Kit: Wireless card and extension cable (141223)
1
2
228825
Kit: Power switch
1
3
228812
Kit: 230 V surge board (141134)
1
4
228820
Kit: Motherboard (141110)
1
5
228822
Kit: Analog board (141125)
1
6
228824
Kit: AC input module
1
7
228814
Kit: Hard drive, 250 GB, SATA
1
8
228813
Kit: Hasp hardware key
1
9
228823
Kit: USB cable, external panel mount, and internal HASP
1
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
Common MicroEDGE Pro parts, continued
1
2
3
4
Item
Part Number
Description
1
228826
Kit: Sub chassis fan, 12 V, internal or external (229417)
1
2
228815
Kit: Power distribution PCB (141153)
1
3
228827
Kit: ATX 1U 400 W power supply (229403)
1
4
223252
Kit: MicroEDGE adapter cable
1
108834
Connector: Remote on/off connector (not shown)
1
MicroEDGE Pro CNC Field Service Bulletin
Qty.
807310
7
MicroEDGE Pro CNC Replacement Parts
Picopath MicroEDGE Pro parts
1
2
5
3
4
Item
8
Part Number
Description
Qty.
1
228834
Kit: Picopath 4 Axis servo, 5 V encoder PCB (141122)
1
2
228817
Kit: 4-axis MCC, serial isolation, and utility PCB (141222)
1
3
228839
Kit: Picopath 2-axis servo, 5 V encoder PCB (141254)
1
4
228838
Kit: Picopath 2-axis MCC, serial isolation, and utility PCB (141256)
1
5
228847
Kit: CPC analog breakout PCB (141210)
1
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
HyPath MicroEDGE Pro parts
1
2
4
3
Item
Part Number
Description
Qty.
1
003179
Relay contact
1
2
228819
Kit: 24 I/O PCB (141070)
1
3
228818
Kit: HyPath 4-axis servo board (141197)
1
4
228847
Kit: CPC analog breakout PCB (141210)
1
MicroEDGE Pro CNC Field Service Bulletin
807310
9
MicroEDGE Pro CNC Replacement Parts
SERCOS II and SERCOS III MicroEDGE Pro parts
1
2
Item
10
Part Number
Description
Qty.
1
228816
Kit: Serial isolation and utility PCB (SERCOS II) (141194/141307)
1
2
228821
Kit: SERCOS II PCI master (SERCOS II configuration only) (141116)
1
428072
Kit: SERCOS III PCI master (SERCOS III configurations only) (141310)
1
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
Replacing parts
Use the instructions in the following sections to replace parts in the MicroEDGE Pro CNC.
Use common safety precautions when replacing parts in the CNC:

Turn off electrical power to the CNC before opening the enclosure.

Use common safety precautions when handling printed circuit boards.

Store PC boards in anti-static containers.

Wear a grounded wrist strap when handling PC boards.
Accessing parts
The cover of the CNC can be removed to give you access to the parts inside. Depending on the part you are replacing,
you may have to remove the back panel, as well.

To open the cover, remove the 8 screws; 6 on the top of the panel and the 2 screws at the bottom, on the side.

To open the rear panel, remove the 7 screws around the outside of the panel.
MicroEDGE Pro CNC Field Service Bulletin
807310
11
MicroEDGE Pro CNC Replacement Parts
Replacing common MicroEDGE parts
Surge PCB (228812)
Follow the steps in Accessing parts to remove the CNC cover.
To remove the Surge board:
1. Disconnect the cables from the power entry module and power supply.
2. Remove the screws from the standoffs.
3. Lift the board off the spring loaded standoffs.
To replace the Surge board:
1. Remove the replacement board from the packaging.
2. Snap the board on the spring loaded standoffs.
3. Replace and fasten the two screws in the standoffs.
4. Plug in the cables for the power entry module and power supply.
HASP hardware key (228813)
Follow the steps in Accessing parts to remove the cover of the CNC.
To remove the HASP key:
1. Remove the zip tie that secures the HASP to the hard drive bracket.
2. Remove the USB memory device from the USB port on the hard drive bracket.
To replace the HASP key:
1. Remove the replacement HASP from the packaging.
2. Insert the USB memory device in the USB port on the hard drive enclosure.
3. Secure the USB memory device with a new zip tie.
12
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
Hard drive (228814)
Follow the steps in Accessing parts to remove the cover of the CNC.
To remove the hard disk drive:
1. Disconnect the power cable from the hard drive.
2. Disconnect the SATA cable connector at the hard drive.
3. Remove the four screws from the hard drive bracket.
4. Slide the hard drive assembly from the bracket and remove the cables. Set the assembly aside.
To replace the hard disk drive:
1. Remove the replacement board from the packaging.
2. Slide the hard drive assembly back into the bracket on the board.
3. Refasten the four screws in the hard drive bracket.
4. Reconnect the cables to the hard drive.
Power distribution PCB (228815)
Follow the steps in Accessing parts to remove the CNC cover.
To remove the board:
1. Remove all cables from the connectors on the board.
2. Remove the screw in the center of the board.
3. Push the board down toward the bottom of the enclosure and lift it off the standoffs.
To replace the power distribution board:
1. Remove the replacement board from the packaging.
2. Fit the large end of the 4 keyhole-shaped holes in the board over the standoffs.
3. Slide the board up, toward the top of the enclosure, to move the small end of the key-shaped holes over the
standoffs.
4. Fasten the screw in the center of the board.
5. Plug the cables into the appropriate connectors on the board.
MicroEDGE Pro CNC Field Service Bulletin
807310
13
MicroEDGE Pro CNC Replacement Parts
Motherboard (228820)
CAUTION!
Static electricity can damage circuit boards. Use proper precautions when handling
printed circuit boards.
Store PC boards in anti-static containers.
Wear a grounded wrist strap when handling PC boards.
If possible, before you remove any parts from the CNC, save the system files to a USB memory stick. These files are
needed for correct operation after you replace the motherboard. If the CNC will not start, old system files or system files
from the machine supplier can be used, but you need to modify these files for any changes that have been made since
your last save.
1. Insert the USB memory stick in the USB port on the back of the CNC.
2. Press Files > Save to Disk > Save System Files to Disk > Save all to zip.
To remove the motherboard:
Follow the steps in Accessing parts to open the front and side panels of the CNC enclosure.
1. To replace the motherboard, use the appropriate procedures in this FSB to remove the PCBs in the PCI stack.

Record the location of each board and the sequence in which you remove them.
2. Disconnect all cables from the motherboard.
3. Remove cables and USB memory devices from the I/O panel on the outside of the unit.
4. Remove the 7 screws that fasten the rear panel to the rear edges of the enclosure.
5. Remove the 5 screws from the standoffs.
6. Pull the motherboard from the standoffs.
7. Lift the motherboard from the enclosure.
14
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
To replace the motherboard:
1. Remove the replacement board from the packaging.
2. Align the standoff holes with the standoffs in the enclosure.
3. Snap the motherboard onto the spring-loaded standoffs.
4. Install the 5 screws on the standoffs.
5. Align the I/O connectors with the I/O cutouts, and then install the rear panel with the 7 screws.
6. Reconnect all cables.
7. Use the appropriate procedures in this FSB to install the PCBs in the PCI stack.

Make sure that you install the PCBs in the correct order and location. If you did not record
this information when you removed the PCBs, you can find the information in the
MicroEDGE Pro Instruction Manual (807290).
To enter the 7MOREDAYS password:
After you replace the motherboard, the CNC requires a HASP 4 password. If you do not have a password, you must
contact Hypertherm Technical Service and request a new HASP 4 password. See To request a new HASP 4 password:
on page 16. You can use the 7MOREDAYS password while you wait for your new password.
1. Connect the power cord and power ON the CNC.
2. Disable all drives and motors.
3. Wait for the Looking for Hardware Key... message to disappear.
4. Connect a USB keyboard.
5. Press Enter to accept the copyright notice.
6. When the HASP 4 window displays, take a screen shot.

You will need the screen shot when you request a new HASP 4 password.
MicroEDGE Pro CNC Field Service Bulletin
807310
15
MicroEDGE Pro CNC Replacement Parts
7. Enter 7MOREDAYS in the HASP 4 window.

You can use the 7MOREDAYS password 7 times. After that, you will
not be able to operate the CNC.

To find how many more times you can use the 7MOREDAYS password,
see the top of the HASP 4 window or the 7 More Days timer on the
Control Information screen.

You must request a new HASP 4 password. See To request a new
HASP 4 password:.
8. Press Enter twice.

If the HASP 4 window displays again, the 7MOREDAYS password has expired. You must
have a HASP 4 password to operate the CNC.
To request a new HASP 4 password:
1. Attach the Phoenix.zip file and the screen shot of the HASP 4 window to an email.
2. Send the email to your local Hypertherm Technical Service email address, listed in the front of this FSB.
3. Hypertherm Technical Service sends a Password.txt file with the password.
To enter the new HASP 4 password:
1. Save the Password.txt file that you receive from Hypertherm Technical Service to the root of a USB memory stick.
2. Insert the USB memory stick into a USB port on the CNC.
3. If the CNC is OFF, use the following steps. If the CNC is ON, go to step 4.
a. Connect the power cord and power ON the CNC.
b. Disable all drives and motors.
c. When the HASP 4 window displays, make sure that the password in the window matches the password in the
Phoenix.txt file. If it does, choose OK.
4. If the CNC is ON, use the following steps.
a. Disable all drives and motors.
16
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
b. Select Setups > Passwords and enter ENABLEHASP.
c. When the HASP 4 window displays, make sure that the password in the window matches the password in the
Phoenix.txt file. If it does, choose OK.
 If the HASP 4 window closes, the new password is correct.
want to make sure that the password is correct, go to the Control Information screen. If you cannot see the
 If7 you
More Days timer, the new password is correct. If you can see the 7 More Days timer, the new password is not correct.
Contact your local Hypertherm Technical Service.
5. Enable the drives and motors.
To calibrate the touch screen:
1. When the Preview Window displays, select Setup > Diagnostics > System (or press F4, F6, then F8) to calibrate the
touch screen.
2. Follow the instructions on the screen to complete the calibration.
MicroEDGE Pro CNC Field Service Bulletin
807310
17
MicroEDGE Pro CNC Replacement Parts
Analog PCB (228822)
Follow the steps in Accessing Parts to remove the CNC cover.
You must remove the MCC, utility, and serial isolation board (228838 or 228817) or the SERCOS board (228816)
before you can remove the analog board. Refer to the appropriate procedures in this FSB for more information.
To remove the Analog board:
1. Unplug the ribbon cable for THC1 and THC2.
2. Remove the standoffs at the front of the board.
3. Pull the board from the PCI slot on the motherboard.
To replace the Analog board:
1. Remove the replacement board from the packaging.
2. Insert the PCB connector into PCI slot 4 on the motherboard and position the holes at the front of the board over the
standoffs.
3. Fasten the standoffs.
4. Reconnect the THC cables.
5. Replace any PCBs that you removed from the PCI stack according to the appropriate procedures in this FSB.
USB cable (228823)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the USB cable:
1. Remove the cover, hex nut, and black plastic washer around the external USB port on the front of the CNC.
2. Remove the rubber lanyard for the cover and the lock washer.
3. Pull the port to the inside.
4. Remove the HASP and set it aside.
5. Remove the screws from the HASP USB port that is mounted on the hard drive bracket.
6. Cut the zip ties on the cable.
7. Disconnect the cable from the motherboard and remove the cable.
18
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
To replace the USB cable:
1. Remove the replacement cable from the packaging.
2. Connect the cable to the motherboard.
3. Align the flat side of the external USB connector with the flat side of the opening in the front panel and pass it
through.
4. Replace the lock washer, lanyard, plastic washer, and hex nut over the USB connector. Tighten the hex nut to 3.95
newton meters (35 pound inch).
5. Fasten the HASP USB port to the hard drive bracket so that the white, rectangular key inside is on the right, toward
the interior of the enclosure.
6. Reinstall the HASP.
7. Secure the cable and the HASP with zip ties.
AC input module (228824)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the AC input module:
1. Remove the surge board according to the procedure in this FSB.
2. Unfasten the 6 screws from the I/O panel on the back of the enclosure and remove the panel without disconnecting
any cables. Set the panel aside.
3. Disconnect the cable from the module to connector J1 on the surge board.
4. Remove the ground nut on the inside rear of the enclosure and remove the ground wire.
5. On the rear panel of the enclosure, remove the screws above and below the AC input module.
6. Pull the module and wires from the enclosure.
MicroEDGE Pro CNC Field Service Bulletin
807310
19
MicroEDGE Pro CNC Replacement Parts
To replace the AC input module:
1. Remove the replacement board from the packaging.
2. Pass the wires and power module through the opening in the rear of the enclosure.
3. Fasten the screws that attach the module to the enclosure.
4. Connect the ground wire to the ground stud and hand-tighten the nut.
5. Plug the power input cable from the module into connector J1 on the surge board.
6. Replace the I/O panel and fasten the 6 screws.
Power switch (228825)
Follow the steps in Accessing parts to remove the CNC cover.
To remove the power switch:
1. Unplug the cable from the MCC, utility, and serial interface board (228838 or 228817).
2. Depress the four tabs on the top and bottom of the assembly inside the enclosure.
3. Pull the assembly through the front of the panel.
To replace the power switch:
1. Remove the replacement switch from the packaging.
2. Snap the switch into the opening through the front panel. Make sure that the green light with the ON symbol is on
top.
3. Connect the cable to the MCC, utility, and serial interface board.
20
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
Internal or external fan (228826)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the internal fan:
1. Unplug the cable from the power supply harness.
2. Remove the screws from the two holes in the left corners of the fan housing.
3. Pull the fan housing from the standoff.
To replace the internal fan:
1. Remove the replacement fan from the packaging.
2. Fit the hole in the upper right corner of the fan housing over the standoff. Verify that the arrow on top of the housing
points toward the enclosure wall.
3. Fasten screws through the left corners of the fan housing.
4. Plug the cable into the power supply harness.
To remove the external fan:
1. Unplug the cable from the power supply harness and pull it and the rubber grommet to the outside of the enclosure.
2. Remove the screws from the two holes in the right corners of the fan housing.
3. Pull the fan housing from the standoff.
To replace the external fan:
1. Remove the replacement fan from the packaging.
2. Fit the hole in the upper left corner of the fan housing over the standoff. Verify that the arrow on right side of the
housing points toward the enclosure wall.
3. Fasten screws through the right corners of the fan housing.
4. Pass the cable through the hole and install the grommet.
5. Plug the cable into the power supply harness.
MicroEDGE Pro CNC Field Service Bulletin
807310
21
MicroEDGE Pro CNC Replacement Parts
Power supply (228827)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the power supply:
1. Insure that the power has been disconnected from the CNC.
2. Disconnect the ATX power cable from the surge PCB and remove the cable from the power entry module.
3. Remove the surge board and power distribution board.
4. Remove the two screws that fasten the power supply bracket to the floor of the enclosure.
5. Remove cables from the nearby cable clips.
6. Lift the power supply bracket from the enclosure.
7. Remove the 2 screws that fasten the bracket to the power supply and slide the power supply out.
8. Unplug the cables to the motherboard.
9. Disconnect the connectors on the rear of the power supply.
10. Unplug the power cable.
To replace the power supply:
1. Remove the replacement power supply from the packaging.
2. Connect the power cable.
3. Remove the 2 screws from the sides of the power supply and discard them.
4. Slide the power supply into the bracket.
5. Fasten the 2 lock washer screws into the sides of the bracket.
6. Plug in the power cable.
7. Replace the bracket in the enclosure and align the holes in the tabs over the lines engraved in the bottom sheet
metal. Push the frame toward the side wall of the enclosure.
8. Fasten the 2 screws to the floor of the enclosure.
9. Reinstall the surge board.
10. Plug the ATX power cable into the surge board and reconnect the cable from the power entry module.
22
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
Wireless PCB and antenna (228836)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the wireless PCB and antenna:
1. Disconnect the antennas or antenna cables from the connectors on the back of the CNC.
2. Remove the screw that connects the PCI bracket to the enclosure.
3. Pull the board from the PCI slot on the motherboard.
To replace the wireless PCB and antenna:
1. Remove the replacement board from the packaging.
2. Insert the PCB connector into PCI slot 3 on the motherboard.
3. Fasten the screw through the PCI bracket into the enclosure.
4. Connect the antennas or antenna cables to the back of the network card. For antennas, adjust them so that they click
into the 45 degree position.
MicroEDGE Pro CNC Field Service Bulletin
807310
23
MicroEDGE Pro CNC Replacement Parts
Replacing Picopath MicroEDGE parts
2- and 4-Axis MCC, utility, and serial interface PCB (228838 and 228817)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the MCC, utility, and serial interface board:
1. Remove the I/O and servo cables.
2. Remove the screw from the standoff.
3. Remove the screw that connects the PCI bracket to the enclosure.
4. Remove the PCI bracket from the board by removing the 4 hex head standoffs on either side of the serial ports.
5. Pull the board from the PCI slot on the motherboard.
To replace the MCC, utility, and serial interface board:
1. Remove the replacement board from the packaging.
2. Install the PCI bracket on the side of the board with the 4 hex head standoffs.
3. Insert the PCB connector into PCI slot 3 on the motherboard and position the holes at the front of the board over the
standoffs.
4. Fasten the screw in the standoff and the PCI bracket.
5. Plug in the I/O cable and the servo cable.
2- and 4-Axis servo PCB (228839 and 228834)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the servo board:
1. Disconnect the I/O, servo, and power cables.
2. Remove the 6 screws from the connector panel on back of the CNC.
3. Remove the panel from the inside of the enclosure.
4. Remove the screw from the center bottom of the board.
5. Remove the 4 screws at the corners of the metal shell around each CPC.
6. Lift the PCB off the spring-loaded standoffs.
7. Remove the bottom and top halves of the split panel from the back of the board.
24
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
To replace the servo board:
1. Remove the replacement board from the packaging.
2. Align the half circles in the edge of the top panel under the CPCs on the board.
3. Snap the top panel onto the spring-loaded standoffs at the top of the board.
4. Align the half circles in the bottom half of the split panel with the CPCs and slide the edge under the top panel.
5. Snap the panel onto the spring-loaded standoffs.
6. Replace the metal shells over the CPCs and fasten them to the split panel with 4 screws on each one.
7. Replace the split panel and the board assembly in the enclosure and refasten it with the 6 screws.
8. Connect the I/O, servo, and power cables.
Analog breakout PCB (228847)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the analog breakout board:
1. Remove any PCBs that are installed in the PCI stack using the appropriate procedures in this FSB.
2. Remove the screws from the circular plastic connectors (CPCs) and pull the board away from the rear panel.
3. Remove the ribbon cable from the analog board.
To replace the analog breakout board:
1. Remove the replacement board from the packaging.
2. Replace the ribbon cable from the analog board.
3. Align the circular connectors with the openings in the rear panel and replace the CPCs with 4 screws at each corner.
4. Replace the PCBs in the PCI stack.
MicroEDGE Pro CNC Field Service Bulletin
807310
25
MicroEDGE Pro CNC Replacement Parts
Replacing HyPath MicroEDGE parts
4-Axis MCC, utility, and serial interface PCB (228817)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the MCC, utility, and serial interface board:
1. Remove the I/O and servo cables.
2. Remove the screw from the standoff.
3. Remove the screw that connects the PCI bracket to the enclosure.
4. Remove the PCI bracket from the board by removing the 4 hex head standoffs on either side of the serial ports.
5. Pull the board from the PCI slot on the motherboard.
To replace the MCC, utility, and serial interface board:
1. Remove the replacement board from the packaging.
2. Install the PCI bracket on the side of the board with the 4 hex head standoffs.
3. Insert the PCB connector into PCI slot 3 on the motherboard and position the holes at the front of the board over the
standoffs.
4. Fasten the screw in the standoff and the PCI bracket.
5. Plug in the I/O cable and the servo cable.
24 I/O PCB (228819)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the 24 I/O board:
1. On the outside of the back panel, remove the screws around each circular plastic connector (CPC).
2. On the inside of the back panel, unplug the cables from the power connectors.
3. Unplug the 50-pin MCC I/O ribbon cable.
4. Remove the screw in the center of the board.
5. Lift the board off the four spring-loaded standoffs.
26
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
To replace the 24 I/O board:
1. Remove the replacement board from the packaging.
2. Line up the standoff holes in the board with the spring-loaded standoffs.
3. Line up the CPC connectors on the back of the board with the openings in the rear panel.
4. Press the board into place.
5. Fasten the screw in the center of the board.
6. Plug in the MCC I/O ribbon cable, the field power cable, and the ATX power cable.
7. Fasten the CPC I/O connectors to the outside of the rear panel with screws.
4-Axis servo PCB (228818)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the 4-axis servo board:
1. Disconnect the cables from the board.
2. Unfasten the 4 screws at the base of each CPC.
3. Unfasten 2 screws from the standoffs at the top of the board.
4. Pull the board from the standoffs.
To replace the 4-axis servo board:
1. Remove the replacement board from the packaging.
2. Place the board over the two standoffs.
3. Replace the 2 screws in the standoffs.
4. Fasten the 4 screws at the base of each CPC.
5. Reconnect the cables to the board.
MicroEDGE Pro CNC Field Service Bulletin
807310
27
MicroEDGE Pro CNC Replacement Parts
Analog breakout PCB (228847)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the analog breakout board:
1. Remove any PCBs that are installed in the PCI stack using the appropriate procedures in this FSB.
2. Remove the screws from the circular plastic connectors (CPCs) and pull the board away from the rear panel.
3. Remove the ribbon cable from the analog board.
To replace the analog breakout board:
1. Remove the replacement board from the packaging.
2. Replace the ribbon cable from the analog board.
3. Align the circular connectors with the openings in the rear panel and replace the CPCs with 4 screws at each corner.
4. Replace the PCBs in the PCI stack.
28
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
Replacing SERCOS II and SERCOS III MicroEDGE parts
SERCOS II and SERCOS III utility and serial isolation PCB (228816)
The SERCOS II utility and serial isolation board is always installed in slot 1 of the PCI stack on the motherboard.
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the SERCOS II and SERCOS III utility and isolation board:
1. Remove the cables to the board.
2. Remove the screw that connects the PCI bracket at the side of the board to the enclosure.
3. Remove the board from the standoff.
4. Pull the board from the PCI slot on the motherboard.
5. Remove the PCI bracket from the board by removing the 4 hex head standoffs on either side of the serial ports.
To replace the SERCOS II and SERCOS III utility and isolation board:
1. Remove the replacement board from the packaging.
2. Install the PCI bracket on the side of the board with the 4 hex head standoffs.
3. Insert the PCB connector into PCI slot 1 on the motherboard.
4. Position the holes at the front of the board over the standoff and fasten the screw.
5. Fasten the PCI bracket to the enclosure.
6. Plug in the cables.
MicroEDGE Pro CNC Field Service Bulletin
807310
29
MicroEDGE Pro CNC Replacement Parts
SERCOS II PCI master (228821)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the SERCOS II board:
1. Remove the screw that connects the PCI bracket at the side of the board to the enclosure.
2. Pull the board from the PCI slot on the motherboard.
To replace the SERCOS II board:
1. Remove the replacement board from the packaging.
2. Insert the SERCOS II board into PCI slot 2 on the motherboard.
3. Fasten the screw in the PCI bracket.
SERCOS III PCI master (428072)
Follow the steps in Accessing Parts to remove the CNC cover.
To remove the SERCOS III board:
1. Remove the screw that connects the PCI bracket at the side of the board to the enclosure.
2. Pull the board from the PCI slot on the motherboard.
To replace the SERCOS II board:
1. Remove the replacement board from the packaging.
2. Insert the SERCOS III board into PCI slot 2 on the motherboard.
3. Fasten the screw in the PCI bracket.
30
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
Test plugs and kits
Common test plugs
The following testers are used for diagnostic testing on all models of the MicroEDGE Pro CNC.
1
2
4
3
Item
Kit Number
Description
228831
Tester Kit: Common plugs
1
Tester for Hypernet or network
2
Tester for RS-422 serial port on the serial isolation boards
3
Tester for USB
4
Tester for RS-232 serial port on the motherboard
MicroEDGE Pro CNC Field Service Bulletin
807310
31
MicroEDGE Pro CNC Replacement Parts
Picopath test plugs
The following testers are used for diagnostic testing on Picopath models of the MicroEDGE Pro CNC.
1
2
3
Item
Kit Number
Description
228833
Tester Kit: Picopath plugs
4
1
Tester for Picopath axes
2
Tester for Picopath I/O (white stripe)
Tester for Picopath I/O (orange stripe)
32
3
Tester for THC (Picopath)
4
Tester for Picopath joystick and speedpot (brown stripe)
MicroEDGE Pro CNC
Field Service Bulletin 807310
MicroEDGE Pro CNC Replacement Parts
Hypath test plugs
The following testers are used for diagnostic testing on HyPath models of the MicroEDGE Pro CNC.
1
2
4
3
Item
Kit Number
Description
228832
Tester Kit: HyPath plugs
1
Tester for HyPath axes
2
Tester for HyPath I/O (green stripe)
Tester for HyPath I/O (red stripe)
3
Tester for THC (Hypath)
4
Tester for Hypath joystick and speedpot (purple stripe)
MicroEDGE Pro CNC Field Service Bulletin
807310
33
MicroEDGE Pro CNC Replacement Parts
34
MicroEDGE Pro CNC
Field Service Bulletin 807310
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising