DPN-4 Duo - SmartAVI
TECHNICAL SPECIFICATIONS
VIDEO
Format
Link Rate
Input Interface
Output Interface
Max Resolution
DisplayPort 1.2
5.4 Gbps/line
(8) DisplayPort (female)
(2) DisplayPort (female)
Up to 3840 x 2160 @ 30Hz
FAUX transaction mode option
DDC
over Aux channel
Input Equalization
Automatic
Bandwidth Frequency 10.2 Gbps
WHAT’S IN THE BOX
PART NO.
QTY
DESCRIPTION
DPN-4Duo-S
1
4-Port Dual-Head DisplayPort
KVM Switch with USB 2.0 and
Audio Sharing
PS5VDC4A
1
Power Adapter
1
Quick Start Guide
Brackets for mounting this device in a standard 19”
rack may be optionally ordered from Smart-AVI.
CONTROL
Front Panel
RS-232
Hot Keys
Buttons, Select/Switch between Video & Audio sources
and view the current selected
channel.
DB9 Female - 9600 N,8,1, No
flow control
Via Keyboard, Select/Switch
between Video & Audio sources
USB
Signal Type
Input Interface
Output Interface
USB 2.0, 1.1, and 1.0 w/ internal hub
(4) USB Type B (female)
(2) USB 1.1 Type A (female) for
keyboard and mouse
(2) USB 2.0 Type A Transparent
AUDIO
Input Interface
Output Interface
Impedance
Frequency Response
Nominal Level
Common Mode
OTHER
Emulation
Power Adapter
Consumption
Dimensions
Weight
Operating Temp.
Storage Temp.
Humidity
(4) 3.5 mm Stereo Audio
(1) 3.5 mm Stereo Audio
600 Ohm
20Hz ~ 20KHz
0-1.0 V
Rejection at 60 dB
Keyboard and mouse
External 100-240 VAC/
5VDC4A
20 W (Max)
2.88” H x 5.75” D x 12.75” W
4.4 lbs
+23 to +95°F (-5 to +35°C)
-4 to +185°F (-20 to 85°C)
5 to 90% (No Condensation)
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI
makes no warranty of any kind with regard to
this material, including but not limited to,
implied warranties of merchantability and
fitness for particular purpose.
DPN‐4 Duo 4-Port Dual-Head
DisplayPort 1.2 KVM Switch
with USB 2.0 and Audio Sharing
SmartAVI will not be liable for errors contained
herein or for incidental or consequential
damages in connection with the furnishing,
performance or use of this material.
No part of this document may be photocopied,
reproduced, or translated into another
language without prior written consent from
SmartAVI Technologies, Inc.
20161020
Designed and Manufactured in the USA
800.AVI.2131
Tel: (818) 503-6200 | Fax: (818) 503-6208
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
Access and Control Four Computers
with 2 DisplayPort Monitors each
Using One KVM Workstation with Two
DisplayPort 1.2 Monitors and
Full KVM Emulation
Quick Start Guide
INTRODUCTION
CONNECTING THE DPN-4 DUO
The DPN-4Duo is a dedicated multi-platform KVM
switch capable of managing four dual-head
computers through two DisplayPort monitors, one
USB keyboard, one USB mouse. The dual-head
compatibility of the switch enables increased
workflow capabilities. DisplayPort is one of the latest
options in screen connectivity that delivers top quality
high definition video, and this device is DisplayPort
1.2 compliant with support for screen resolutions up
to 3840x2160 (@30Hz).
1. Ensure that power is disconnected from the DPN-4 DUO.
2. Connect the DisplayPort cables, USB cables (male-A to male-B) and Audio cables from the computers to the
respective ports on the DPN-4 DUO.
3. Optionally connect RS-232 for control functions.
4. Connect the USB keyboard and mouse to the two USB ports marked for them on the right.
5. Connect the DisplayPort monitors to the OUT connectors on the DPN-4 DUO.
6. Connect speakers to the Audio out jack on the DPN-4 DUO.
7. Power on the DPN-4 DUO.
Note: The 2 USB ports on the right are dedicated for keyboard and mouse emulation. The 2 on the left are for
other USB peripherals. (flash drives, printers, etc.)
HDMI and DVI video connections are supported with
the proper video converters, and the device is
backwards compatible with prior DisplayPort versions.
The USB emulation technology utilized by DPN-4 Duo
enables immediate hot key source switching through
the connected USB keyboard and mouse. Additional
USB peripherals can be attached, like a USB printer.
Front Panel Control
To switch ports using the front panel, press the M1 or
M2 button to navigate from computer to computer.
The numbered LED lights will indicate which computer
is selected.
Hotkey Commands
The Hotkey command is a keyboard sequence used
to trigger an action on the DPN-4 Duo through the
use of the keyboard connected on the USB port of
the DPN-4 Duo. To activate the hotkey sequence,
press the CTRL key twice and then enter the desired
hotkey commands.
RS-232 Control
Use an RS-232 serial cable to connect a computer
to the RS-232 port of the DPN-4 Duo. Use terminal
client software to connect to and control the DPN-4
Duo. Make sure to use the communication mode of
9600 bps, 8, N, 1, (no flow control).
COMMANDS
HOTKEYS
RS-232 CONTROL
Switch all devices (KVM, USB 2.0, and Audio)
Switch KVM only
Switch Audio only
Switch USB 2.0 only
[CTRL] [CTRL] m [port #] [ENTER]
[CTRL] [CTRL] c [port #] [ENTER]
[CTRL] [CTRL] a [port #] [ENTER]
[CTRL] [CTRL] u [port #] [ENTER]
//m [port #] [ENTER]
//c [port #] [ENTER]
//a [port #] [ENTER]
//u [port #] [ENTER]
Same as front panel ◄ M1 button
[CTRL] [CTRL] ↑
n/a
Same as front panel M2 ► button
Reset
[CTRL] [CTRL] ↓
n/a
[CTRL] [CTRL] r
//r
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising