ANALOG INPUT PANEL METERS INDI-PAX DISP-PAX

ANALOG INPUT PANEL METERS INDI-PAX DISP-PAX
INDI-PAX
DISP-PAX
ANALOG INPUT PANEL METERS
Universal panel meters for using with transducers and process signals
Features
INDI-PAX / DISP-PAX
o Strain gauge, process, voltage and current inputs
o Intuitive and easy programming (high flexibility)
o 16 points scaling for linearization
o Programmable function keys/user inputs
o Variable intensity display
o Options
- 4(0)...20mA or 0...10V analog output
- 2 or 4 setpoints with relay outputs
- RS232, RS485, USB or fieldbus capabilities
- NEMA 4X/IP65 (Transparent protection cover - Option "F")
- Desktop or industrial steel housing
- Rail DIN adaptor
Applications
The INDI-PAX DISP-PAX is perfectly designed to the following applications :
o Industrial weighing
o Force or torque measurement
o Remote display
Functions
- Reset (tare), Maximum and minimum memories, Smart filter,
- Totalization of several measurements, Protection code, ...
Specifications
INDI-PAXS
INDI-PAXS-24
DISP-PAXP
DISP-PAXP-24
DISP-PAXD
Type
Single strain gauge
bridge input meter
Single strain gauge
bridge input meter
Single process input
meter
Single process input
meter
Single voltage or
current meter
-
Input range
± 24mV / ±240mV**
± 24mV / ±240mV**
20mA / 10VDC**
20mA / 10VDC**
0,2mA...2A /
200mVDC...300VDC**
-
Sensor excitation
10 VDC @125mA
max***
10 VDC @125mA
max***
24VDC ± 5% @50mA
max.
24VDC ± 5% @50mA
max.
24VDC ± 5% @50mA
max.
-
Display
5 digits (14.2 mm)
5 digits (14.2 mm)
5 digits (14.2 mm)
5 digits (14.2 mm)
5 digits (14.2 mm)
-
Accuracy
0.1
0.1
0.1
0.1
0.1
% F.S.*
A/D converter
16 bit
16 bit
16 bit
16 bit
16 bit
-
Converter rate
Up to 20 readings/s
Up to 20 readings /s
Up to 20 readings /s
Up to 20 readings /s
Up to 20 readings /s
-
Service temperature range
0...+50
0...+50
0...+50
0...+50
0...+50
°C
Storage temperature range
-40...+60
-40...+60
-40...+60
-40...+60
-40...+60
°C
85...250 VAC (15VA)
11...36 VDC (11W),
24VAC (15VA)
85...250 VAC (15VA)
11...36 VDC (11W), 24
VAC (15VA)
85...250 VAC (15VA)
-
IP54****
IP54****
IP54****
IP54****
IP54****
-
Power supply
IP Rating
* F.S.: Full scale.
** : Configurable at user's level.
*** : 5 VDC @65mA max (jumper selectable).
**** : IP rating for front panel only.
Specifications subject to change without notice.
FP_INDI-PAX DISP-PAX_EN.pdf / rev. : 30/06/2017
www.sensy.com
www.sensy.com
CARD-CDC10
- RS485 field bus communication interface
- Available with crew terminals or DB9 connector
CARD-CDC20
- RS-232C half duplex communication interface
- Available with crew terminals or DB9 connector
CARD-CDC50
- Profibus-DP (EN 50170) communication interface
CARD-CDL10
- Analog output signal: 0-20 mA, 4-20 mA, or 0-10 VDC (*)
CARD-CDS10
& CARD-CDS20 (already included in load limitation electronics)
- 2 or 4 set-points activating each an independent relay
It is possible to install up to 3 different option cards in the same panel meter. These options have to be of different type.
Ex. : CARD-CDS-20 + CARD-CDL10 + CARD-CDC20 is available
CARD-CDS20 + CARD-CDS10 or CARD-CDC10 + CARD-CDC20 is not available
Full technical documentation available on request
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising