QIG DG-KP8002 v2 - Smartlink Network Systems Ltd

QIG DG-KP8002 v2 - Smartlink Network Systems Ltd
BRETON SERIES
2 Port Mini PS/2 KVM Switch
With Built In Cables
DG-KP8002
PS/2
2 PORTS
V1.0
2012-05-03
Copyright
Copyright © 2012. All rights reserved.
Company has an on-going policy of upgrading its products and it may
be possible that information in this document is not up-to-date.
Please check with your local distributors for the latest information.
No part of this document can be copied or reproduced in any form
without written consent from the company.
Trademarks
TM
DIGISOL is a trademark of Smartlink Network Systems Ltd. All other
trademarks are the property of the respective manufacturers.
Package Contents
The following items should be present in your package:
DG-KP8002 2 Port Mini PS/2 KVM Switch with Built In Cables
Quick Installation Guide
Make sure that the package contains above items. If any of the listed
items is damaged or missing, please contact your retailer immediately.
Product Overview
The DG-KP8002 is a 2 Port Mini PS/2 KVM Switch with Built In Cables. It
allows control of up to two computers from a single set of keyboard,
monitor and mouse. The compact design and the integrated cables
reduces the clutter caused by cables.
Product Features
Pocket size design with integrated cables
Access up to 2 computers from one Keyboard & Mouse
No Software installation is required
Supports plug-n-play
Resolution up to 1920x1440 with bandwidth of 250MHz
Supports Auto Scan Mode, and easy Hot Key control
Power-up from PS/2 interface, no need of external power supply
Product View
Below shown is the product top view:
6
5
4
1
Number
1
2
3
4
5
6
2
Interface
PS/2 Mouse
HD-15F
PS/2 Keyboard
LED
PC1 Cable
PC2 Cable
3
Function
Connects to a PS/2 Mouse
Connects to a Monitor
Connects to a PS/2 Keyboard
Indicates the status of the PC connected
Connects to PC1
Connects to PC2
Installation
1
Connect the PS/2 Mouse to the PS/2 port on the KVM Switch.
2
Connect the Monitor to the KVM Switch using the VGA cable.
3 Connect the PS/2 Keyboard to the PS/2 port on the KVM Switch.
4 Connect the PC to the KVM Switch using the integrated KVM cables.
KVM operation key sequence
To activate auto scan mode, hot key sequence is ScrLK + ScrLK.
To deactivate the auto scan mode, press Esc key on keyboard.
To select a PC, hot key sequence is ScrLK + ScrLK + Esc.
Setting Auto Scan Time
By default the auto scan time is set to 5 seconds.
If the KVM switch is powered off then the scan time will set to
default of 5 seconds.
Press "+" or "-" key to select the scan rate.
SCAN
RATE
Num Lock
LED
Caps Lock
LED
Scroll Lock
LED
5 secs.
OFF
OFF
ON
10 secs.
ON
OFF
OFF
15 secs.
ON
OFF
ON
20 secs.
OFF
ON
OFF
25 secs.
OFF
ON
ON
30 secs.
ON
ON
OFF
This product comes with One Year warranty. For further details about
warranty policy and Product Registration, please visit support section of
www.digisol.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising