CableIQ™ Qualification Tester

CableIQ™ Qualification Tester
C a b l e I Q ™ Q u a l i f i c a t i o n Te s t e r
T h e n e t w o r k t e c h ’s v i s i o n i n t o c a b l i n g b a n d w i d t h .
CableIQ, the first
cabling bandwidth
tester for network
technicians.
As an IT professional, you have
a tough balancing act. You’re an
on-the-spot problem solver. And
you’ve got your eye on future
enhancements, seamlessly
upgrading the network to higher
speeds, while optimizing the
current infrastructure. All this
without adding staff and while
working with smaller budgets.
That’s why Fluke Networks
designed CableIQ – an easy-to-use
cable troubleshooting and
bandwidth qualification tester
specifically for network technicians. It has all the power you
need to see whether your cable is
qualified to support 10/100, VoIP
or Gigabit Ethernet and quickly
solve network connectivity
CableIQ: See network
infrastructure problems quickly
• Isolate cabling problems from network problems. Save time and money
by escalating fewer trouble tickets.
• See existing cabling bandwidth.
Four-second test quickly determines
if your existing cabling can support
voice/10/100, VoIP or Gigabit Ethernet.
• Troubleshoot cabling performance faults.
Determine why the existing cabling plant
cannot support the desired network speed
(e.g. connection fault at 7 feet).
• Free up 10% or more of your switch ports.
Discover what is at the far end of
any cable, whether it is an open cable,
a PC, an analog phone, or switch.
• Detect speed/duplex mismatches in a matter
of seconds. Determine a PC’s duplex settings
and compare settings to the connected switch –
all from one location.
• Isolate faults easier with intelligent
wiremap. Test for wiremap, length, shorts, split
pairs or opens, and graphically see the distance
to specific pin faults, such as “pin 1 break at
37 feet.”
CableIQ gives network techs
new vision into cabling bandwidth
• Locate cables and wires with superior
accuracy. Breakthrough IntelliTone™ digital
signaling technology precisely locates cables in
even the most chaotic wiring closet.
for network technicians who need to
• Empower frontline techs with an easy-to-use
tool. Intuitive user interface and
graphical display guides users with little
or no training required.
support, quickly isolate cabling from
• Avoid disputes over cause of network problems. Save results or upload them
to a PC with Cable IQ Reporter Software (included).
CableIQ is the first cabling tool designed
troubleshoot and qualify cabling bandwidth.
It gives even the most novice tech vision
to see what speeds existing cabling can
network problems, and discover what is
at the far end of any cable. That means
network techs can close trouble tickets
faster, reduce on-call time, and save
money by better utilizing their existing
infrastructure.
problems in one intuitive,
handheld tool.
Technical Data
The network tech’s vision into cabling bandwidth
Reduce escalated problems
by as much as 30%
Ensure a smooth transition
to VoIP or Gigabit Ethernet
CableIQ’s powerful troubleshooting
When you deploy Voice over IP (VoIP)
capability and intuitive interface enable
or Gigabit Ethernet, you want to make sure
frontline technicians to identify and
the existing cabling will support the band -
troubleshoot a wider range of infrastructure
width requirements of your new equipment.
problems. Is the port active? Are the duplex
Your cabling was certified, but moves adds
settings matched? Is it a network problem or
and changes have rendered many links
a cable problem? Can the cable support the
incapable of running desired speeds.
required network bandwidth? CableIQ
CableIQ quickly reveals whether a link,
is the only tool that can answer all these
including patch cords, is qualified for voice,
questions before trouble tickets are
10/100BASE-T, VoIP, or Gig. Knowing your
escalated to the next level.
cabling‘s bandwidth capabilities before
upgrading can prevent countless hours of
Troubleshoot cabling faults
in half the time
future downtime and labor hours wasted
on unnecessary troubleshooting.
CableIQ shows you whether your cabling is
Experience the unique capabilities of
qualified to support the network’s required
bandwidth, and provides detailed information
on the nature and location of cabling perfor mance faults. Intelligent wiremap graphically
displays the cable‘s wiring
configuration, and shows the distance to
opens and shorts. Advanced diagnostics
also identifies and locates non-wiremap
related connection faults, such as cross talk or large impedance changes. Built-in
See what customers are saying
about CableIQ:
CableIQ by taking a virtual test drive at
“CableIQ’s best feature is its ability to see
(US and Canada), and let a
cabling bandwidth. I had a PC that was lock -
Fluke Networks Systems Engineer show
ing up intermittenly. I plugged CableIQ into
you how CableIQ technology can work
the link and found a Cat 3 patch cord. After
for you. Visit www.flukenetworks.
swapping out the cord, the problem went
com/contact to locate Fluke Networks’
away.” – Network Specialist
sales organizations worldwide.
IntelliTone digital technology allows you to
“The ability to troubleshoot an active port
tone and trace without disconnecting from
is a timesaver – reducing the total time
the network. With CableIQ, your techs can
needed for problem resolution.” – Electronic
close trouble tickets faster by cutting cable
Communications Staff Associate
troubleshooting time in half.
“If we put one of these in the hands of
every frontline tech, we could save ourselves
100
10
1000
Gig
cabling bandwidth
Mbps
F1
computer
F2
30% in on-call time.” – Network
Administrator
open
EXIT
TEST
ENTER
switch
analog phone
security cam era/
video
See the power of CableIQ
in action
www.flukenetworks.com/seecableiq.
Or call us at 1-844-721-8130
CableIQ™ Qualification Tester
Unparalleled vision into cabling bandwidth
Graphical display.
Backlit for viewing
in all environments.
From the worldwide leader
in network test.
Portable, lightweight,
rugged ergonomic design
for easy field use.
Safely test on active
network. Perform most
cabling or network tests
without having to
disconnect.
Discover mode detects and
locates switches and shows
link configuration (speed/
duplex/pairing).
Store 250 results
for later reviewing.
Cable bandwidth
qualification. Find out in
four seconds what
bandwidth your cable
can support.
Digital or analog
toning. Compatible
with IntelliTone Probe
for finding cables with
superior precision.
Intelligent wiremap
graphically shows distance to
specific conductor fault.
Expert cabling
diagnostics gives you
detailed information on
bandwidth faults.
Four AA batteries.
Long lasting battery life for
several weeks of testing.
Rotary knob makes
learning easy and
operation simple – you
always know what test
mode is selected.
USB port for fast transfer
of data to PC or to reflash
software.
Remote adapter
for testing existing copper cabling –
doubles as a protective endcap.
RJ45 and F-Connector
tests voice/data/video/audio cabling.
Ordering Information
Model
CIQ-100
CIQ-KIT
CIQ-IDK57
CIQ-FTKSFP
Specifications
Description
Cable types supported
UTP, STP, FTP, SSTP, RG6, RG59, audio, security
CableIQ Qualification Tester
includes CableIQ with remote adapter
and soft carrying case
Qualification autotests
1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100,
TELCO, Wiremap only, Coax
Supported tests
Wiremap, length, cable signal performance, digital toner,
analog toner, Ethernet port detection and identification,
analog telephone detection, blink port light, continuity,
speaker test, cable fault finding, video signal detection
CableIQ Advanced IT Kit
includes CableIQ with remote adapter,
IntelliTone 200 Probe, six remote office
IDs, rugged carrying case
Wiremap
Can detect single wire faults and supports MultiMap mode
with up to seven remote office identifiers. Draws proportional
wire length to breaks. Detects Split Pairs.
Find fault
Measures crosstalk and impedance and compares against
appropriate limits based on qualification test selected.
Detects location of large point sources as well as
distributed sources in the cabling if they are sufficient
to disqualify the application.
CableIQ Remote Identifier Kit
includes three remote identifiers
numbers 5-7
Copper and Fiber Technician’s Kit
includes the CableIQ (CIQ-KIT) and
SimpliFiber Pro (FTK1000) Fiber Test Kit.
Results storage
Up to 250 qualification test results
Power
Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life
20 hours of typical use, without backlight
Other battery types
supported
4AA photo lithium, NIMH, NICAD
Dimensions and weight
7 in x 3.5 in x 1.75 in (17.8 cm x 8.9 cm x 4.5 cm)
1.2 lb (0.55 kg)
M12/ RJ45 Cable Specifications
CIQ-KRQ
Residential Qualifier Kit
includes CableIQ main unit (CIQ-100),
RJ45 patch cord (2), RJ11 patch cord (2),
USB cable, bare wire adapter, speaker wire
adapter, coax cable, coax BNC adapter,
coax RCA adapter, 'Qualified' labels (50),
CD ROM user manual, getting started guide,
AA batteries (4) and a soft carrying case.
Cable type
Ethernet cable, Cat5e, shielded, 2 Pair AWG 26 stranded
(7 wire), RAL 5021 (water blue), M12 4 pos. D- coded on
RJ45 connector
Number of positions
4
Fixed cable length
2m
Volume resistance
≤ 5 mΩ
Insulation resistance
≥ 100 M Ω
Ambient temperature
-20 oC to 50 oC
Inflammability class
acc to UL 94
V0
Surge voltage category
II
Pollution degree
3
Degree of protection
IP20/IP67
External cable diameter
6.7 mm
Transmission
characteristics
Cat 5 (IEC 11801:2002), Cat 5e (TIA 568B:2001)
Fluke Networks
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries
worldwide. To find your local office contact details,
go to www.flukenetworks.com/contact .
Contact Fluke Networks: Phone 800-283-5853
(US/Canada) or 425-446-4519 (Other locations)
Email: info@flukenetworks.com
©2011 Fluke Corporation.
Printed in U.S.A. 1/2016 2132194F
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising