iPS2 - Data Sheet
iPS2
www.iS5com.com
Industrial 1 Port Gigabit PoE Splitter
Features
10/100/1000T
ââ
Fully compliant with IEEE 802.3at standard
ââ
Supports 1 x 10/100/1000Base-T(X) for PoE In and Data Out
ââ
Power Isolation and Short Circuit Protection for Power Output
ââ
Automatic protection for Over-Voltage Power Input
ââ
Supports Power Output of up to 30 Watts
ââ
IP-40 Galvanized Steel Housing
ââ
DIN-Rail and wall mount
iPS2
PoE IN
Data OUT
PWR
iS5com.com
Tel: +905-670-0004
Fax: +289-401-5206
Email: info@is5com.com
#3-7490 Pacific Circle, Mississauga, Ontario, L5T 2A3
All specifications are subject to change without notice.
IS5 REV.06082016
Page—1
Introduction
The iPS2 is a high-power PoE Splitter for use in Power over Ethernet systems. With an Ethernet Input (data
+ power) port and Output (data only) port, the iPS2 will split power from an existing LAN cable and convert
it up to 24VDC/1.25A for power-hungry applications such as wireless APs, security cameras, and IP Phones.
The internal current limiter, as well as, short-circuit and overload protection have been implemented so that the
iPS2 may be used as a DC power supply.
Practical Operation
10/100/1000T
iPS2
TM
1
2
3
4
G1
PoE
8
PWR1
PWR2
P8
G4
G5
G6
G7
G8
R.M
iRing
Fault
Data Out
6
7
iES8
G2
G3
5
COM
PoE IN
10/100/1000T
LINK / ACT
P7
Console
Reset
1000X
G9
Console
Data OUT
G10
Fault
iRing
R.M
P6
P3
P4
P1
P2
G11
PWR2
PWR1
TM
PWR
Reset
P5
G12
COM
iES12GP
iES12GP
PoE
IN
iES8
PWR
Data + Power
Power
iPS2
PoE Splitter Connections
Connectors and Pin Definitions
PoE Pin Definition 1
1000Base-T
RJ45 Input (Data and Power)
RJ45 Output (Data Only)
Pin No.
Symbol
Description
Symbol
Description
1
BI_DA+
Data BI_DA+
BI_DA+
Data BI_DA+
2
BI_DA-
Data BI_DA-
BI_DA-
Data BI_DA-
3
BI_DB+
Data BI_DB+
BI_DB+
Data BI_DB+
4
BI_DC+ (VDC+)
Data BI_DC+ and Feeding Power(+)
BI_DC+ Data BI_DC+
Data BI_DC+
5
BI_DC- (VDC+)
Data BI_DC- and Feeding Power(+)
BI_DC-
Data BI_DC-
6
BI_DB-
Data BI_DB-
BI_DB-
Data BI_DB-
7
BI_DD+ (VDC-)
Data BI_DD+ and Feeding Power(-)
BI_DD+
Data BI_DD+
8
BI_DD- (VDC-)
Data BI_DD- and Feeding Power(-)
BI_DD-
Data BI_DDNote
All specifications are subject to change without notice |
IS5 REV.06082016
www.iS5com.com | Page—2
10/100Base-T(X)
RJ45 Input (Data and Power)
RJ45 Output (Data Only)
Pin No.
Symbol
Description
Symbol
Description
1
Rx+
Data Receive
Rx+
Data Receive
2
Rx-
Data Receive
Rx-
Data Receive
3
Tx+
Data Transmit
Tx+
Data Transmit
4
VDC+
Feeding Power(+)
NC
Not Connected
5
VDC+
Feeding Power(+)
NC
Not Connected
6
Tx-
Data Transmit
Tx-
Data Transmit
7
VDC-
Feeding Power(-)
NC
Not Connected
8
VDC-
Feeding Power(-)
NC
Not Connected
Note: Pins 7 and 8 (VDC-) should not be shorted to ground
PoE Pin Definition 2
1000Base-T
RJ45 Input (Data and Power)
RJ45 Output (Data Only)
Pin No.
Symbol
Description
Symbol
Description
1
BI_DA+ (VDC+)
Data BI_DA+ and Feeding Power(+)
BI_DA+
Data BI_DA+
2
BI_DA- (VDC+)
Data BI_DA- and Feeding Power(+)
BI_DA-
Data BI_DA-
3
BI_DB+ (VDC-)
Data BI_DB+ and Feeding Power(-)
BI_DB+
Data BI_DB+
4
BI_DC+
Data BI_DC+
BI_DC+
Data BI_DC+
5
BI_DC-
Data BI_DC-
BI_DC-
Data BI_DC-
6
BI_DB- (VDC-)
Data BI_DB- and Feeding Power(-)
BI_DB-
Data BI_DB-
7
BI_DD+
Data BI_DD+
BI_DD+
Data BI_DD+
8
BI_DD-
Data BI_DD-
BI_DD-
Data BI_DDRJ
10/100Base-T(X)
RJ45 Input (Data and Power)
RJ45 Output (Data Only)
Pin No.
Symbol
Description
Symbol
Description
1
Rx+ (VDC+)
Data Receive and Feeding Power(+)
Rx+
Data Receive
2
Rx- (VDC+)
Data Receive and Feeding Power(+)
Rx-
Data Receive
3
Tx+ (VDC-)
Data Transmit and Feeding Power(-)
Tx+
Data Transmit
4
NC
Not Connected
NC
Not Connected
5
NC
Not Connected
NC
Not Connected
6
Tx- (VDC-)
Data Transmit and Feeding Power(-)
Tx-
Data Transmit
7
NC
Not Connected
NC
Not Connected
8
NC
Not Connected
NC
Not Connected
Note: Pins 3 and 6 (VDC-) should not be shorted to ground
All specifications are subject to change without notice |
IS5 REV.06082016
www.iS5com.com | Page—3
Specifications
Model Number iPS2
Physical Ports
10/100/1000Base-T(X) RJ45 Port with
P.S.E Input
1
10/100/1000Base-T(X) RJ45 Port Output
1
Power Output Connector
4-pin terminal block
LED Indicators
Power Indicator
PWR / Ready: 1 x LED
Blue On: Power is on and is functioning normally
Power
Input Voltage
Input 36-57VDC
Output Voltage
24V @ 1.25A max.
Short Circuit Protection
Present
Over Load Protection
Present
Isolation Protection
1500V
Physical Characteristics
Enclosure
IP-40 Galvanized Steel
Dimension (W x D x H)
32.1 (W) x 72.2 (D) x 105.5 (H) mm (1.26 x 2.84 x 4.15 inches)
Weight (g)
~2000 g
Environmental
Storage Temperature
-40°C to +85°C (-40°F to +185°F)
Operating Temperature
-40°C to +85°C (-40°F to +185°F) No Fans
Operating Humidity
5% to 90% Non-condensing
Regulatory Approvals
EMI
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Safety
EN60950-1
Warranty
Warranty
All specifications are subject to change without notice |
5 Years
IS5 REV.06082016
www.iS5com.com | Page—4
Dimensions
All Dimensions are in mm
0.68 [17.2]
2.73 [69.3]
0.68 [17.2]
0.17 [ 4.3]
1.32 [33.6]
1.26 [32.1]
PANEL MOUNT
5.50 [139.7]
5.00 [127.0]
5.00 [127.0]
4.59 [116.6]
4.15 [105.5]
1.05 [26.7]
2.84 [72.2]
3.25 [82.5]
INITIAL DESIGN
4. REMOVE ALL BURRS AND SHARP EDGES
3. ALL DIMENSIONS IN INCHES
2. ANGULAR TOLERANCE ±0.5°
1. TOLERANCE .XX
` 0.010, .XXX
` 0.005
iS5Com
PROPRIETARY
INFORMATION
Ordering Information
THIRD ANGLE PROJECTION
DOCUMENT CLASS 8.5.5
REF#:
3D MODEL FILE:
LC---
STEP
Base
Power
Supply
Mount
Ethernet
Port 1
Ethernet
Port 2
iPS2
MV
D
1GRJ45
1GRJ45
iPS2
|
|
|
|
Core assembly and packaging
MV
|
|
|
Input (36-57VDC)
D
|
|
DIN Rail Mounting
P
|
|
Panel Mounting
N
|
|
No Mounting Hardware
1GRJ45
1GRJ45
1 X 10/100/1000Base-T(X) RJ45
Example Order Code: Description: ENG: A. ZENG
DRN: A.Z.
DATE: 2013-09-21
ECO CHANGE DESCRIPTION
TITLE
A.Z.
DRAWN
SHEET
iPS2 PoE Splitter
1 OF 1
-
2013-09-21
ECO
DWG
NO.
Description
iPS2-MV-D-1GRJ45-1GRJ45-C1
1 Port Gigabit PoE Splitter, (Power Supply) Input 36-57VDC, DIN Rail Mounting, 1 x 10/100/1000Base-T(X) RJ45 Port,
1 x 10/100/1000Base-T(X) RJ45 Port, Conformal Coating
C1 – Add for conformal coating
All specifications are subject to change without notice |
IS5 REV.06082016
www.iS5com.com | Page—5
DATE
1
REV
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising