compact series - Trevis Audio Lab

compact series - Trevis Audio Lab
COMPACT
SERIES
extreme lightweight
loudspeaker system
www.trevisaudio.com
hotline@trevisaudio.com
COMPACT
SERIES
TA-08
extreme lightweight
fullrange loudspeaker
SYSTEM SPECIFICATIONS
Frequency Response 1
68Hz-19kHz ±3dB (45 Hz - 19 kHz ±3dB with TA-15S Subwoofer)
Usable Frequency Range (-6dB) 1
62Hz 20kHz (40 Hz - 20 kHz with TP-S115 Subwoofer)
Sensitivity 1W @ 1m
2
96 dB SPL Nominal, 94 dB SPL Wideband
Nominal Peak SPL @ 1m 2
125 dB SPL
HF Dispersion
90° Horizontal x 60° Vertical, rotatable horn
Crossover Frequency 3
2200 Hz passive, with HF protection
Nominal Impedance
8 Ohm
Recommended Amplifiers
4
Trevis Audio TAD1004, TAD1504
PRODUCT FEATURES
Components: Low Frequency
1 x 8” Neodymium motor 8 Ohm driver
2” (51 mm) voice coil
High Frequency
1 x 1” throat compression driver + low distortion CD horn
1.4” (36 mm) voice coil, Mylar diaphragm, Ferrofluid™ cooling
Connectors
2 x Neutrik SPEAKON™ 4 pole
Construction
Special extreme lightweight plywood cabinet with bracing
Height x Width x Depth
410 x 250 x 280 [mm]
Weight
7.5 kg
Handle
Integral, on top of the cabinet
Cabinet Finish
Textured durable black polyurethane coating
Front finish
AcuFoam™ on perforated steel grille
Stand fittings
Built in Stand Fitting, 35mm (1”3/8), 12xM8 flying points
PRODUCT FEATURES
uHigh power systems with
8”, 10” and 12” LF and 1”
HF drivers.
uFerrofluid® cooled HF
drivers with self resettable
overload protection.
uRotatable 90°x60°
constant directivity horn
and unique cabinet
architecture ensure
versatility; user adaptable
for both PA and stage
monitoring applications.
uTwo-way passive 8 Ohm
design uses a single
amplifier channel for
simple installation and
lower cost.
uSupported with stand
mounting and 12 M8 flying
points for threaded eyebolts or brackets.
TA-08 SYSTEM
APPLICATIONS
uNear-field touring,
installed PA for clubs,
A/V,theater, broadcast, etc.
uHigh quality stage
monitoring for clubs, A/V,
theater, broadcast, etc.
uFill-in system in
conjunction with larger
Trevis Audio systems.
[1] Response curves & data : Anechoic Far Field for the TA loudspeakers with system EQ. Half-Space Anechoic radiation for the TA-S speakers with system EQ.
[2] Sensitivity & Peak SPL data. Measured with band limited Pink Noise (6dB crest factor). Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3dB
range. Data are for speaker + processor + recommended amplifier combinations (500Wrms to 8 Ohms).
[3] Acoustical crossover frequency - at this frequency, the transducers produce equal sound pressure levels.
[4] Any other clip-limited power amplifiers can be used which can deliver 200 to 500 Watts into 8 Ohms for 1xTA-08, 400 to 1000 Watts to 4 Ohms for 2xTA-08
www.trevisaudio.com
hotline@trevisaudio.com
COMPACT
SERIES
TA-10
extreme lightweight
fullrange loudspeaker
SYSTEM SPECIFICATIONS
Frequency Response 1
65Hz-19kHz ±3dB (45 Hz - 19 kHz ±3dB with TA-15S Subwoofer)
Usable Frequency Range (-6dB) 1
60Hz 20kHz (40 Hz - 20 kHz with TP-S115 Subwoofer)
Sensitivity 1W @ 1m
2
98 dB SPL Nominal, 96 dB SPL Wideband
Nominal Peak SPL @ 1m 2
127 dB SPL
HF Dispersion
90° Horizontal x 60° Vertical, rotatable horn
Crossover Frequency 3
2100 Hz passive, with HF protection
Nominal Impedance
8 Ohm
Recommended Amplifiers
4
Trevis Audio TAD1004, TAD1504
PRODUCT FEATURES
Components: Low Frequency
1 x 10” Neodymium motor 8 Ohm driver
2.5” (64 mm) voice coil
High Frequency
1 x 1” throat compression driver + low distortion CD horn
1.4” (36 mm) voice coil, Mylar diaphragm, Ferrofluid™ cooling
Connectors
2 x Neutrik SPEAKON™ 4 pole
Construction
Special extreme lightweight plywood cabinet with bracing
Height x Width x Depth
470 x 310 x 320 [mm]
Weight
9 kg
Handle
Integral, on top of the cabinet
Cabinet Finish
Textured durable black polyurethane coating
Front finish
AcuFoam™ on perforated steel grille
Stand fittings
Built in Stand Fitting, 35mm (1”3/8), 12xM8 flying points
PRODUCT FEATURES
uHigh power systems with
8”, 10” and 12” LF and 1”
HF drivers.
uFerrofluid® cooled HF
drivers with self resettable
overload protection.
uRotatable 90°x60°
constant directivity horn
and unique cabinet
architecture ensure
versatility; user adaptable
for both PA and stage
monitoring applications.
uTwo-way passive 8 Ohm
design uses a single
amplifier channel for
simple installation and
lower cost.
uSupported with stand
mounting and 12 M8 flying
points for threaded eyebolts or brackets.
TA-10 SYSTEM
APPLICATIONS
uNear-field touring,
installed PA for clubs,
A/V,theater, broadcast, etc.
uHigh quality stage
monitoring for clubs, A/V,
theater, broadcast, etc.
uFill-in system in
conjunction with larger
Trevis Audio systems.
[1] Response curves & data : Anechoic Far Field for the TA loudspeakers with system EQ. Half-Space Anechoic radiation for the TA-S speakers with system EQ.
[2] Sensitivity & Peak SPL data. Measured with band limited Pink Noise (6dB crest factor). Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3dB
range. Data are for speaker + processor + recommended amplifier combinations (500Wrms to 8 Ohms).
[3] Acoustical crossover frequency - at this frequency, the transducers produce equal sound pressure levels.
[4] Any other clip-limited power amplifiers can be used which can deliver 200 to 500 Watts into 8 Ohms for 1xTA-10, 400 to 1000 Watts to 4 Ohms for 2xTA-10
www.trevisaudio.com
hotline@trevisaudio.com
COMPACT
SERIES
TA-12
extreme lightweight
fullrange loudspeaker
SYSTEM SPECIFICATIONS
Frequency Response 1
62Hz-20kHz ±3dB (45 Hz - 20 kHz ±3dB with TA-15S Subwoofer)
Usable Frequency Range (-6dB) 1
58Hz 21kHz (40 Hz - 21 kHz with TP-S115 Subwoofer)
Sensitivity 1W @ 1m
2
99 dB SPL Nominal, 97.5 dB SPL Wideband
Nominal Peak SPL @ 1m 2
129 dB SPL
HF Dispersion
90° Horizontal x 60° Vertical, rotatable horn
Crossover Frequency 3
1700 Hz passive, with HF protection
Nominal Impedance
8 Ohm
Recommended Amplifiers
4
Trevis Audio TAD1004, TAD1504
PRODUCT FEATURES
Components: Low Frequency
1 x 12” Neodymium motor 8 Ohm driver
2.5” (64 mm) voice coil
High Frequency
1 x 1” throat compression driver + low distortion CD horn
1.7” (44 mm) voice coil, polyimide diaphragm, Ferrofluid™ cooling
Connectors
2 x Neutrik SPEAKON™ 4 pole
Construction
Special extreme lightweight plywood cabinet with bracing
Height x Width x Depth
560 x 400 x 360 [mm]
Weight
10.5 kg
Handle
Integral, on top of the cabinet
Cabinet Finish
Textured durable black polyurethane coating
Front finish
AcuFoam™ on perforated steel grille
Stand fittings
Built in Stand Fitting, 35mm (1”3/8), 12xM8 flying points
PRODUCT FEATURES
uHigh power systems with
8”, 10” and 12” LF and 1”
HF drivers.
uFerrofluid® cooled HF
drivers with self resettable
overload protection.
uRotatable 90°x60°
constant directivity horn
and unique cabinet
architecture ensure
versatility; user adaptable
for both PA and stage
monitoring applications.
uTwo-way passive 8 Ohm
design uses a single
amplifier channel for
simple installation and
lower cost.
uSupported with stand
mounting and 12 M8 flying
points for threaded eyebolts or brackets.
TA-12 SYSTEM
APPLICATIONS
uNear-field touring,
installed PA for clubs,
A/V,theater, broadcast, etc.
uHigh quality stage
monitoring for clubs, A/V,
theater, broadcast, etc.
uFill-in system in
conjunction with larger
Trevis Audio systems.
[1] Response curves & data : Anechoic Far Field for the TA loudspeakers with system EQ. Half-Space Anechoic radiation for the TA-S speakers with system EQ.
[2] Sensitivity & Peak SPL data. Measured with band limited Pink Noise (6dB crest factor). Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3dB
range. Data are for speaker + processor + recommended amplifier combinations (500Wrms to 8 Ohms).
[3] Acoustical crossover frequency - at this frequency, the transducers produce equal sound pressure levels.
[4] Any other clip-limited power amplifiers can be used which can deliver 200 to 500 Watts into 8 Ohms for 1xTA-12, 400 to 1000 Watts to 4 Ohms for 2xTA-12
www.trevisaudio.com
hotline@trevisaudio.com
COMPACT
SERIES
TA-15
extreme lightweight
fullrange loudspeaker
SYSTEM SPECIFICATIONS
Frequency Response 1
58Hz-19kHz ±3dB (35 Hz - 19kHz ±3dB with TA-18S Subwoofer)
Usable Frequency Range (-6dB) 1
55Hz 20kHz (35 Hz - 20 kHz with TP-S118 Subwoofer)
Sensitivity 1W @ 1m
2
99.5 dB SPL Nominal, 98 dB SPL Wideband
Nominal Peak SPL @ 1m 2
132 dB SPL
HF Dispersion
90° Horizontal x 40° Vertical, rotatable horn
Crossover Frequency 3
1300 Hz passive, with HF protection
Nominal Impedance
8 Ohm
Recommended Amplifiers 4
Trevis Audio TAD1504, TAD2008
PRODUCT FEATURES
Components: Low Frequency
1 x 15” Neodymium motor 8 Ohm driver
3” (76 mm) voice coil
High Frequency
1 x 1.4” throat compression driver + low distortion CD horn
PRODUCT FEATURES
uHigh power full-range
loudspeaker with 15”
woofer and 1.4” HF driver.
uRotatable 90°x40°
constant directivity horn
and unique cabinet
architecture ensure
versatility; user adaptable
for both PA and stage
monitoring applications.
uTwo-way passive 8 Ohm
design uses a single
amplifier channel for
simpler installation and
lower cost.
2.5” (65 mm) voice coil, Titanium diaphragm
Connectors
2 x Neutrik SPEAKON™ 4 pole
Construction
Special extreme lightweight plywood cabinet with bracing
Height x Width x Depth
680 x 430 x 395 [mm]
Weight
17 kg
Handle
Integral, on top and on both sides of the cabinet
Cabinet Finish
Textured durable black polyurethane coating
Front finish
AcuFoam™ on perforated steel grille
Stand fittings
Built in Stand Fitting, 35mm (1”3/8), 12xM8 flying points
uSupported with stand
mounting and 12 M8 flying
points for threaded eyebolts or brackets.
TA-15 SYSTEM
APPLICATIONS
uNear-field touring,
installed PA for clubs,
A/V,theater, broadcast, etc.
uHigh quality, high power
stage monitoring for clubs,
A/V, theater, broadcast,
etc.
uFill-in system in
conjunction with larger
Trevis Audio systems.
[1] Response curves & data : Anechoic Far Field for the TA loudspeakers with system EQ. Half-Space Anechoic radiation for the TA-S speakers with system EQ.
[2] Sensitivity & Peak SPL data. Measured with band limited Pink Noise (6dB crest factor). Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3dB
range. Data are for speaker + processor + recommended amplifier combinations (700Wrms to 8 Ohms).
[3] Acoustical crossover frequency - at this frequency, the transducers produce equal sound pressure levels.
[4] Any other clip-limited power amplifiers can be used which can deliver 350 to 800 Watts into 8 Ohms for 1xTA-15, 700 to 1600 Watts to 4 Ohms for 2xTA-15
www.trevisaudio.com
hotline@trevisaudio.com
COMPACT
SERIES
TA-15S
extreme lightweight
Subbass extension for
COMPACT speakers
SYSTEM SPECIFICATIONS
Frequency Response 1
45 Hz - 2000 Hz ±3dB
Usable Frequency Range (-6dB) 1
40 Hz - 2000 Hz
Sensitivity 1W @ 1m
2
97 dB SPL
Nominal Peak SPL @ 1m 2
129 dB SPL
Crossover Frequency
250 Hz passive (can be bypassed with switch on connector panel)
Crossover Output
250 Hz passive highpass-filter (see system operation)
Nominal Impedance
8 Ohm
Recommended Amplifiers3
Trevis Audio TAD 2008
PRODUCT FEATURES
Components: Low Frequency
1 x 15” Neodymium motor 8 Ohm driver
3” (76 mm) voice coil
Connectors
2 x Neutrik SPEAKON™ 4 pole
System Operation
2+, 2- terminal on 4 pole SPEAKON™ is the passive high-pass filtered output for
TA full-range loudspeakers to combine TA-15S and TA-08 (or TA-10) speakers as
a passive satellite system, which can be easily driven from a single amplifier
channel giving the user a very simple and cost effective way to create a high
quality extended range loudspeaker system
Construction
Special extreme lightweight plywood cabinet with bracing
Height x Width x Depth
640 x 430 x 540 [mm]
Weight
17 kg
Handle
Integral, on both sides of the cabinet
Cabinet Finish
Textured durable black polyurethane coating
Front finish
AcuFoam™ on perforated steel grille
Stand fittings
Built in Stand Fitting on top, 35mm (1”3/8), flying points (optional)
PRODUCT FEATURES
uHigh power bass
extension with 15” LF
driver for TA range
speakers.
uEasy set up and cabling
uBuilt in bypassable
passive low-pass filter and
passive high-passed
output for TA-08 or TA-10
speakers
uSupported with stand
mounting and optional
flying accessories.
TA-15S SYSTEM
APPLICATIONS
uHigh power touring,
installed PA for clubs,
A/V,theater, broadcast, etc.
uHigh quality , high power
stage monitoring for clubs,
A/V, theater, broadcast,
etc.
uFill-in system in
conjunction with larger
Trevis Audio systems.
[1] Response curves & data : Anechoic Far Field for the TA loudspeakers with system EQ. Half-Space Anechoic radiation for the TA-S speakers with system EQ.
[2] Sensitivity & Peak SPL data. Measured with band limited Pink Noise (6dB crest factor). Data are for speaker + processor + recommended amplifier
combinations (700 Wrms to 8 Ohms).
[3] Any other clip-limited power amplifiers can be used which can deliver 500 to 800 Watts into 8 Ohms for 1xTA-15S, 1000 to 1600 Watts to 4 Ohms for 2xTA-15S
www.trevisaudio.com
hotline@trevisaudio.com
COMPACT
SERIES
TA-18S
extreme lightweight
Subbass extension for
COMPACT speakers
SYSTEM SPECIFICATIONS
Frequency Response 1
38 Hz - 1000 Hz ±3dB
Usable Frequency Range (-6dB) 1
35 Hz - 1000 Hz
Sensitivity 1W @ 1m
2
98 dB SPL
Nominal Peak SPL @ 1m 2
132 dB SPL
Recommended Crossover Freq.
100Hz - 150Hz
Crossover Output
-
Nominal Impedance
8 Ohm
Recommended Amplifiers3
Trevis Audio TAD 2008, TAD1504 (-bridged mono operation)
PRODUCT FEATURES
Components: Low Frequency
1 x 18” Neodymium motor 8 Ohm driver
PRODUCT FEATURES
uHigh power sub-bass
extension with 18” LF
driver for TA range
speakers.
uSupported with stand
mounting and optional
flying accessories.
TA-115S SYSTEM
APPLICATIONS
4” (102 mm) voice coil
Connectors
2 x Neutrik SPEAKON™ 4 pole
Construction
Special extreme lightweight plywood cabinet with bracing
Height x Width x Depth
700 x 510 x 630 [mm]
Weight
26 kg
Handle
Integral, on both sides of the cabinet
Cabinet Finish
Textured durable black polyurethane coating
Front finish
AcuFoam™ on perforated steel grille
Stand fittings
Built in Stand Fitting on top, 35mm (1”3/8), flying points (optional)
[1] Response curves & data : Anechoic Far Field for the TA loudspeakers with system EQ. Half-Space Anechoic radiation for the TA-S speakers with system EQ.
[2] Sensitivity & Peak SPL data. Measured with band limited Pink Noise (6dB crest factor). Data are for speaker + processor + recommended amplifier
combinations (1500 Wrms to 8 Ohms).
[3] Any other clip-limited power amplifiers can be used which can deliver 800 to 1500 Watts into 8 Ohms for 1xTA18S, 1600 to 3000 Watts to 4 Ohms for 2xTA-18S
uHigh power touring,
installed PA for clubs,
A/V,theater, broadcast, etc.
uHigh quality , high power
stage monitoring for clubs,
A/V, theater, broadcast,
etc.
www.trevisaudio.com
hotline@trevisaudio.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising