NIO 200 Series
NIO 200 Series
ISA100/WirelessHART Process Automation Wireless Gateway
NIO 200 C1D2
NIO 200 ATEX
Main Features
ŒŒ Full Mesh topology: robust wireless connectivity from ISA100/
WirelessHART field device coverage to Wi-Fi backbone
ŒŒ Perfect triple play infrastructure: video surveillance via high
throughput Wi-Fi backbone ensures video transmission without
compromising video performance
ŒŒ Dual Wi-Fi Mesh path establishes better stability in backbone transmission
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Wide temperature range, high EMC immunity to Surge, ESD and EFT
Suitable for deployment in hazardous environments
Incorporates power redundancy (DC and PoE)
Distributed network topology provides scalable infrastructure: easy
integration and cost saving
Product Overview
NEXCOM NIO 200 is a powerful distributed network topology ISA100.11a access point integrating 802.11n Mesh technology. With ISA100.11a/WirelessHART
technology, NIO 200 can establish fully Mesh network to ensure robust and reliable communication for mission-critical industrial wireless applications. The
integration of both 802.11n Mesh & ISA100.11a/WirelessHART technology gives a full Mesh infrastructure from field devices to Wi-Fi backbone, thus a
concrete wireless connectivity can be assured. It’s designed to meet CID2 and ATEX certified requirement and is perfect solution to critical data monitoring
and sensing in oil & gas, chemical plant, etc…
Specifications
Wireless Radio
ŒŒ IEEE802.11a/n x 2, MIMO 2 x 2
ŒŒ IEC 61000-4-4 level 4 electrical fast transient burst immunity
IEEE802.15.4, 1 Tx, 1 Rx
Wi-Fi Frequency Ranges
ŒŒ USA: 5.15~5.25 GHz, 5.725~5.825 GHz
Europe: 5.47~5.725 GHz
RF Output Power: IEEE 802.11a
ŒŒ 802.11a - 28 dBm with 2 antennas
ŒŒ 802.11n (HT20) - 27 dBm with 2 antennas
ŒŒ 802.11n (HT40) - 27 dBm with 2 antennas
* Note:
The available RF output power will be given by certified power in different region
Hardware
ŒŒ W
AN: 10/100/1000 Base-TX MDI/ MDIX
ŒŒ LAN: 10/100/1000 Base-TX MDI/ MDIX
ŒŒ Ethernet compliant with:
-- IEEE802.3/802.3u
-- Hardware based 10/100/1000, full/half, flow control auto negotiation
ŒŒ Push buttons: 1 x reset/ restore to default
ŒŒ LED:
-- 2 x Ethernet
- 2 x 11an radio
-- 1 x IWSN radio
- 1 x Power/ Status
ŒŒ N-Type:
-- 5 x N-type connector for NIO 200IDR/ IAG/ HAG
-- 4 x N-type connector for NIO 200IDG
Safety Compliance
ŒŒ UL 60950-1; 60950-22
IEC 60950, 2nd edition
ŒŒ EN 60950, 2nd edition
IEC 61000-4-2 level 4 ESD immunity
ŒŒ IEC 61000-4-5 level 4 AC surge immunity
IWSN Gateway
Wi-Fi Security (AP Mode)
ŒŒ W
EP (64/ 128/ 152)
ŒŒ WPA2-personal (PSK+CCMP/AES)
ŒŒ MAC address filtering (MAC ACL)
WAP/ WPA2 mixed
Hidden ESSID support
Station isolation
* Note: The AP function is to be quipped in 2nd phase stage.
System Management
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
nCare, web GUI management
SNMP V1/ V2c/ V3
Event log
Syslog information support
Configuration backup and restore
One-button-click to restore factory default setting
Firmware upgrade
SNMP V1/ V2c/ V3 client
High-Side Communication Interfaces
ŒŒ
ŒŒ
ŒŒ
ŒŒ
onitoring and Control System (MCS)
M
MODBUS/ CP
Gateway Services Access Point (GSAP) (only for NIO200IAG/ IDG)
HART-IP (only for NIO200HAG)
Physical and Power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
2~48 VDC PoE (standard PoE 802.3at)
1
Wall/pole mountable
Dimension: 256mm x 226mm x 91mm
Weight: 2.5Kg
www.nexcom.com
249.79
93.00
60.00
259.77
Environment Protection
ŒŒ
ŒŒ
ŒŒ
ŒŒ
perating temperature: -40~75°C (altitude : up to 3000m)
O
Storage temperature: -40~80°C
Humidity: 0% to 95% maximum (non-condensing)
Vibration: random 0.3g
Certification
ŒŒ UL 60950-1; 60950-22
ŒŒ Radio approvals
-- FCC Part 15.247, 15.407 - EN 300 328 - EN 301 893
ŒŒ EMI and susceptibility
-- FCC Part 15.107, 15.109 - EN 301 489-1, -17
Reporting Rate
ŒŒ UL: Class I, Division 2, Groups A, B, C and D, T4
ŒŒ ATEX: Class I, Zone 2; Ex nA II, T4
ISA100 Capabilities
Standard IEEE
802.15.4
Data Rate
250 kbps
Modulation
Q-PSK
Spread Spectrum
DSSS
RF Output Power
Max +15 dBm
Sensitivity
-95 dBm
Connector
N type
Antenna
2 dBi@ 2.4GHz
Performance Parameters
NIO 200IDG: 200 field instruments, 20 subnets
Mesh Network Depth 3 hops
Field Device Join Time As low as 20 seconds
WirelessHART
All-in-One
Gateway
NIO 200IAG-US
(P/N: 10T00020008X0)
NIO 200HAG-EU
(P/N: 10T00020010X0)
Distributed
Gateway
NIO 200IDG-US
(P/N: 10T00020009X0)
-
Distributed
Backbone Router
NIO 200IDR-US
(P/N: 10T00020004X0)
-
ŒŒ P/N: 5040210012X00
SIMPLE WALL MOUNT KIT VER: A SIN SUPER CIRCLE
ŒŒ P/N: 5040410110X00
POLE MOUNT FOR NIO200 VER: A SIN SUPER CIRCLE 92x228x90mm
SECC=2.0t WHITE
ŒŒ P/N: 7A00000066X00
Antenna arrester, DC-6 GHz N-MALE TO N-FEMALE
ŒŒ P/N: 603ANT0012X00
Dual Polarization-Directional Antenna for 5 GHz 20dBi
ŒŒ P/N: 603ANT0009X00
Directional Antenna 2300~2700 MHz 16~17 dBi
NIO 200IDR: 50 field instruments
NIO 200HAG: 250 field instruments
ISA100
Optional Accessories
NIO 200IAG: 100 field instruments
Scalability
WirelessHART: 8,16,32 secs and 1-60 minutes;
10 devices publishing/second
Ordering Information
Anti-Explosive Certification
Wireless Communication Interface Specifications
ISA100: 1, 5, 10, 20, 30 and 60 seconds;
10 devices publishing/second
ŒŒ P/N: 603ANT0010X00
Directional Sector Antenna 2400~2500 MHz 14±0.5 dBi
ŒŒ P/N: 603ANT0013X00
Directional Sector Antenna 5150~5875 MHz 15±0.5 dBi
IWSN Gateway
We reserve the right to change specifications and product descriptions at any time without prior notice.
Last update: 06/28/2017
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising