technical guide – cast 1.0.0

technical guide – cast 1.0.0
TECHNICAL GUIDE – CAST 1.0.0
1. MINIMUM REQUIREMENTS
•
Windows 7 64bit
•
Mac OS 10.11 (El Capitan) 64bit
•
1.3 GHz dual-core Intel Core i5
•
2GB of RAM
•
120mb available disk space
•
Network interface card (NIC) with ethernet adapter or WiFi IEEE 802.11 g/n/ac
•
Internal/external sound card with in/out stream, 48 kHz/16 bit sampling rate
•
Internet connection (for license validation purposes only)
•
To achieve best audio results, we recommend using high class audio signals for the
input or boom-arm microphone headsets.
2. INSTALLING
2.1.
WINDOWS
Run cast-1.0.0-setup.exe and follow on-screen instructions.
2.2.
MAC OS
Mount cast-1.0.0-setup.dmg and move lineapp-cast.app to your Application folder.
2.3
MULTIPLE STREAMS
If you want to stream from more than one audio source at the same time, you can add
multiple desktops parallel to the network.
Every of your desktops requires a CAST license. Contact us at sales@lineapp.pro.
3. NETWORK SETTINGS
The computer running the application must be connected to the same IP network, either
via ethernet cable or WiFi. We recommend Ethernet cable. Please see our WiFi guide for
more information https://www.lineapp.pro/products/flux/faq/tech
NOTE: Changing the network settings while the application is running might result in
unexpected behavior. To avoid this, please change the settings beforehand or restart the
application after the changes have been made.
4. SOUND SETTINGS
CAST application will use the default input and output settings of the computer. Make sure
these are configured correctly and will receive/transmit audio.
NOTE: Changing the audio settings while the application is running might result in
unexpected behavior. To avoid this, please change the settings beforehand or restart the
application after the changes have been made.
5. APPLICATION SETUP
After starting the application, a profile setup window will appear and you will be asked to
enter your:
•
Name (required)
•
Picture (optional)
•
Booking Code (required)
NOTE: To finish the profile setup, you must provide a valid booking code which can be
purchased from https://booking.lineapp.pro or sales@lineapp.pro . To validate the booking
code, an internet connection is required at this step only. Failing to validate will not allow
you to proceed any further!
All receiver devices have to download CAST receiver software, which is available for free
from the iOS and Android Appstores.
To receive the CAST stream, all devices must join the same WiFi network as the transmitter.
As soon as CAST application is started, users will see all available streams which can be
individually chosen by just one click.
6. FEATURES
•
Stream audio to mobile devices
•
Statistics of current and max. connections and listeners
•
Mute stream
•
Push-To-All (force listen)
•
Level meter indicates the audio level of the audio input
7. KNOWN ISSUES
7.1 DESKTOP:
OS: no issues.
Windows: we have seen some issues about delay of audio after a while of streaming
(approximately 12 hours). We recommend restarting CAST desktop on your Windows
device in case of unusual high audio delay.
7.2 MOBILE DEVICES:
iOS: no issues.
Android: little audio delay on the android plattform.
We strongly recommend using headphones on mobile devices.
8. SUPPORT
Please contact us at support@lineapp.pro or call us at: +436769479434
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising