Adnaco Technology Adnaco-S3B

Adnaco Technology Adnaco-S3B
Adnaco Technology
Adnaco-S3B
Adnaco-S3B - USB 3.0 Over Fiber Optic Expansion System
The Adnaco-R1USB30 is a remote standard-USB 3.0 host controller which can operate at distances up to
100 m and more (depending on transceivers and cable) from the location of your computer. Powered by
Adnaco PCIe over-fiber-optic technology, the R1USB30 was designed to suit many applications with the
USB host interface. The R1USB30 provides 2 USB Root Hub Ports compliant with the USB 3.0
specification. All USB ports can handle the following interfaces:
 Super-Speed (5.0 Gb/s)
 High-Speed (480 Mbps)
 Full-Speed (12 Mbps)
 Low-Speed (1.5 Mbps)
The R1USB30 is connected to a host computer, equipped with the Adnaco-H1A card and a fiber optic
cable. Super-Speed USB is backward compatible with USB 2.0 devices and capable of operating with USB
2.0 platforms. The R1USB30 works with all USB systems and peripherals and does not required any
additional software.
PS1 AC/DC 5V Power Supply and Adnaco-R1USB30 in enclosure
Adanco-S3B-DS-Rev1.10
1 of 3
www.adnaco.com
Adnaco Technology
Adnaco-S3B
Adnaco-S3B System Power-On/Off Sequence
There is no special condition for power on/off sequence for your computer and the AdnacoR1USB30 from an electrical point of view, but to operate properly, the Adnaco-R1USB30 must be
powered on first, because the BIOS needs to configure the PCI and PCIe components properly before
the operating system boots.
USB Ports of the Adnaco-R1USB30 fully support USB Hot Plug and Play specifications and user’s USB
devices can be powered On/Off in any sequence.
Recommended Power On/Off Sequence
Power‐On Sequence
Power on the Adnaco‐R1USB30.
Power on the host computer.
Power‐On Sequence Rationale: The host computer BIOS and OS assume all PCI/PCIe cards are
available for first code execution following power‐up.
Power‐Off Sequence
Power off the host computer.
Power off the Adnaco‐R1USB30.
Power‐Off Sequence Rationale: OS and Drivers assume all PCI/PCIe cards are always available
from power‐on to power‐off.
Note: Disconnection of the Fiber Optic Link with the System powered on will require a Power‐
Off/On sequence to resume operation.
Host Side - Computer Hardware Installation
To install the Adnaco-H1A card please follow up section 8 (System Installation) of the Adnaco PCI
Express Over Fiber Optic Systems User’s Guide.
USB 3.0 Host Controller Driver



A Microsoft WHQL certified xHCI compliant driver is provided by Texas Instruments and supports
Windows XP, Windows Vista, and Windows 7 for both 32 & 64 bit systems.
For Windows 8 use the Microsoft built-in driver.
Linux support available from open Source Community.
Adanco-S3B-DS-Rev1.10
2 of 3
www.adnaco.com
Adnaco Technology
Adnaco-S3B
Related Documents and Ordering Information:
Click here to download other related documentation.
Adnaco-S3A system ordering information:
Standard Part Number
Included items
 ADNACO-H1A-01: Host Adapter with multi-mode transceiver and
standard height bracket
 Low profile bracket for Adnaco-H1A
ADNACO-S3B-01-000-P-E
 ADNACO-R1USB30B-01-E: USB 3.0 Remote Adapter in enclosure with
multi-mode transceiver
 Power supply with interchangeable AC plugs: NA, EU, UK, AU
 ADNACO-H1A-01: Host Adapter with multi-mode transceiver and
standard height bracket
 Low profile bracket for Adnaco-H1A
 ADNACO-R1USB30B-01-E: USB 3.0 Remote Adapter in enclosure with
ADNACO-S3B-01-010-P-E
multi-mode transceiver
 Power supply with interchangeable AC plugs: NA, EU, UK, AU
 ADNACO-FC1-10: Multi-Mode, Duplex, LC-LC connectors, 50/125 µm,
10 m fiber optic cable
Custom Part Number: Adnaco-S3B-YY-XXX{Option1}{Option2}
Configuration Description
00 – without optical transceivers
YY
01 – with multi-mode transceivers
02 – with single-mode transceivers
XXX – cable length in meters: 001, 010, 050, 100
XXX
000 – supplied without cable
Cable type matches transceivers type : multi-mode or single-mode
-P – with power supply with interchangeable AC plugs: NA, EU, UK, AU
Option1
Leave blank - supplied without power supply
-E – R1USB30 Remote Adapter in enclosure
Option2
Leave blank - R1USB30 Remote Adapter without enclosure
Custom Part Number: Adnaco-R1USB30B-YY{Option1}{Option2}
Configuration Description
00 – without optical transceivers
YY
01 – with multi-mode transceivers
02 – with single-mode transceivers
-P – with power supply with interchangeable AC plugs: NA, EU, UK, AU
Option1
Leave blank - supplied without power supply
-E – R1USB30 Remote Adapter in enclosure
Option2
Leave blank - R1USB30 Remote Adapter without enclosure
Example1: Adnaco-R1USB30B-01
without enclosure
Example2: Adnaco-R1USB30B-00
enclosure
Adanco-S3B-DS-Rev1.10
- R1USB30B with MM transceiver, without power supply,
- R1USB30B without transceiver, without power supply, without
3 of 3
www.adnaco.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising