Owner`s Manual

Owner`s Manual
Owner’s Manual
BL00004880-205 EN
Introduction
Thank you for your purchase of this product. Be sure that
you have read this manual and understood its contents before using the camera. Keep the manual where it will be
read by all who use the product.
For the Latest Information
For the latest information on this product, including the latest
versions of the manuals and sample color photographs, visit:
http://fujifilm-dsc.com/manuals/
The site can be accessed not only from your computer but also
from smartphones and tablets.
ii
P Chapter Index
Menu List
1 Before You Begin
iv
1
2 First Steps
23
3 Basic Photography and Playback
39
4 Movie Recording and Playback
45
5 Taking Photographs
51
6 The Shooting Menus
85
7 Playback and the Playback Menu
119
8 The Setup Menus
145
9 Shortcuts
175
10 Peripherals and Optional Accessories
187
11 Connections
207
12 Technical Notes
217
iii
Menu List
Camera menu options are listed below.
Menu List
Shooting Menus
Adjust settings when shooting photos or movies.
N See page 85 for details.
H IMAGE QUALITY SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
SIMULATION
1⁄3 FILM
GRAIN EFFECT
COLOR CHROME EFFECT
DYNAMIC RANGE
WHITE BALANCE
HIGHLIGHT TONE
SHADOW TONE
COLOR
2⁄3 SHARPNESS
NOISE REDUCTION
LONG EXPOSURE NR
LENS MODULATION OPTIMIZER
COLOR SPACE
PIXEL MAPPING
3⁄3 SELECT CUSTOM SETTING
EDIT/SAVE CUSTOM SETTING
iv
P G AF/MF SETTING
P
86
FOCUS AREA
87
AF MODE
87
STORE AF MODE BY ORIENTATION
88 1⁄2 RAPID AF
89
AF POINT DISPLAYyz
89
NUMBER OF THE FOCUS POINTS
89
PRE-AF
90
FACE/EYE DETECTION SETTING
93
AF+MF
93
MF ASSIST
93
FOCUS CHECK
93 2⁄2 INTERLOCK SPOT AE & FOCUS AREA
94
INSTANT AF SETTING
94
DEPTH-OF-FIELD SCALE
94
RELEASE/FOCUS PRIORITY
94
TOUCH SCREEN MODE
95
95
96
97
97
98
98
98
99
99
100
101
101
102
102
102
103
103
103
Menu List
P F FLASH SETTING
104
105
105
106
106
107
108
109
109
110
112
FLASH FUNCTION SETTING
RED EYE REMOVAL
TTL-LOCK MODE
LED LIGHT SETTING
MASTER SETTING
CH SETTING
B MOVIE SETTING
MOVIE MODE
MOVIE AF MODE
HDMI OUTPUT INFO DISPLAY
HDMI REC CONTROL
MIC LEVEL ADJUSTMENT
P
113
113
114
114
115
115
P
116
116
117
117
117
The Playback Menu
Adjust playback settings.
N See page 126 for details.
C PLAY BACK MENU
SWITCH SLOT
RAW CONVERSION
ERASE
1⁄2 CROP
RESIZE
PROTECT
IMAGE ROTATE
RED EYE REMOVAL
P C PLAY BACK MENU
126
VOICE MEMO SETTING
127
COPY
129
WIRELESS COMMUNICATION
131 2⁄2 PHOTOBOOK ASSIST
132
PRINT ORDER (DPOF)
133
instax PRINTER PRINT
134
DISP ASPECT
135
P
136
137
138
139
141
142
143
v
Menu List
A SHOOTING SETTING
SELF-TIMER
SAVE SELF-TIMER SETTING
INTERVAL TIMER SHOOTING
BKT SETTING
1⁄2 AE
FILM SIMULATION BKT
PHOTOMETRY
SHUTTER TYPE
IS MODE
ISO AUTO SETTING
2⁄2 MOUNT ADAPTOR SETTING
WIRELESS COMMUNICATION
Setup Menus
Adjust basic camera settings.
N See page 145 for details.
Menu List
D USER SETTING
FORMAT
DATE/TIME
TIME DIFFERENCE
a MY MENU SETTING
SENSOR CLEANING
BATTERY AGE
RESET
D SOUND SETTING
AF BEEP VOL.
SELF-TIMER BEEP VOL.
OPERATION VOL.
HEADPHONES VOLUME
SHUTTER VOLUME
SHUTTER SOUND
PLAYBACK VOLUME
vi
P D SCREEN SETTING
P
146
EVF BRIGHTNESS
153
147
EVF COLOR
153
147
LCD BRIGHTNESS
153
148 1⁄2 LCD COLOR
153
148
IMAGE DISP.
154
149
AUTOROTATE DISPLAYS
154
149
PREVIEW EXP./WB IN MANUAL MODE 155
150
PREVIEW PIC. EFFECT
155
FRAMING GUIDELINE
156
P
AUTOROTATE PB
157
151
157
151 2⁄2 FOCUS SCALE UNITS
DISP. CUSTOM SETTING
158
151
SUB MONITOR SETTING
159
152
152
152
152
Menu List
P D SAVE DATA SETTING
P
FRAME NO.
SAVE ORG IMAGE
EDIT FILE NAME
CARD SLOT SETTING (STILL IMAGE)
SWITCH SLOT (SEQUENTIAL)
MOVIE FILE DESTINATION
COPYRIGHT INFO
D CONNECTION SETTING
WIRELESS SETTINGS
PC CONNECTION SETTING
GEOTAGGING SET-UP
instax PRINTER CONNECTION
SETTING
P PC SHOOT MODE
167
167
168
169
170
170
170
170
171
171
160
161
162
164
164
164
165
165
165
165
166
166
166
P
172
173
173
173
174
vii
Menu List
D BUTTON/DIAL SETTING
FOCUS LEVER SETTING
EDIT/SAVE QUICK MENU
FUNCTION (Fn) SETTING
BUTTON SETTING
1⁄2 SELECTOR
COMMAND DIAL SETTING
SHUTTER AF
SHUTTER AE
SHOOT WITHOUT LENS
FOCUS RING
AE/AF-LOCK MODE
2⁄2 EXPO. COMP. BUTTON SETTING
TOUCH SCREEN SETTING
LOCK
D POWER MANAGEMENT
AUTO POWER OFF
SHOOTING STAND BY MODE
AUTO POWER SAVE
P Table of Contents
Introduction ........................................................................................................... ii
For the Latest Information............................................................................................ ii
Menu List................................................................................................................ iv
Shooting Menus ................................................................................................................iv
The Playback Menu ..........................................................................................................v
Setup Menus........................................................................................................................vi
Supplied Accessories ......................................................................................xvii
About This Manual..........................................................................................xviii
Symbols and Conventions .....................................................................................xviii
Terminology ....................................................................................................................xviii
1
Introduction
1 Before You Begin
1
Parts of the Camera ............................................................................................. 2
The Selector...........................................................................................................................5
The Focus Stick ....................................................................................................................5
The Shutter Speed and Sensitivity Dials ..............................................................5
The Command Dials ........................................................................................................6
The Drive Button ................................................................................................................7
The Indicator Lamp ..........................................................................................................8
The LCD Monitor ................................................................................................................9
The Viewfinder ....................................................................................................10
Attaching the Viewfinder ...........................................................................................11
The Eye Cup .......................................................................................................................11
Focusing the Viewfinder .............................................................................................11
Camera Displays .................................................................................................12
The Electronic Viewfinder ..........................................................................................12
Display Rotation...............................................................................................................13
The LCD Monitor .............................................................................................................14
Choosing a Display Mode .........................................................................................16
Adjusting Display Brightness ...................................................................................16
The DISP/BACK Button ................................................................................................17
Customizing Standard Indicators .........................................................................19
The Secondary LCD Monitor....................................................................................21
Using the Menus ................................................................................................22
viii
Table of Contents
2 First Steps
3 Basic Photography and Playback
39
Taking Photographs (Mode P) .......................................................................40
a Viewing Pictures...........................................................................................43
b Deleting Pictures ...........................................................................................44
4 Movie Recording and Playback
45
F Recording Movies ........................................................................................46
Adjusting Movie Settings...........................................................................................48
a Viewing Movies ............................................................................................49
5 Taking Photographs
51
P, S, A, and M Modes..........................................................................................52
Mode P: Program AE .....................................................................................................52
Mode S: Shutter-Priority AE ......................................................................................54
Mode A: Aperture-Priority AE ..................................................................................58
Mode M: Manual Exposure .......................................................................................60
Autofocus..............................................................................................................62
Focus Mode ........................................................................................................................63
Autofocus Options (AF Mode) ................................................................................65
Focus-Point Selection...................................................................................................67
Touch Focus Controls .......................................................................................70
Manual Focus.......................................................................................................71
Checking Focus................................................................................................................73
ix
1
Introduction
23
Attaching the Shoulder Strap ........................................................................24
Attaching a Lens .................................................................................................26
Charging the Battery ........................................................................................27
Inserting the Battery .........................................................................................30
Inserting Memory Cards ..................................................................................32
Using Two Cards ..............................................................................................................33
Compatible Memory Cards ......................................................................................34
Turning the Camera On and Off ...................................................................35
Checking the Battery Level.............................................................................36
Basic Setup ...........................................................................................................37
Choosing a Different Language.............................................................................38
Changing the Time and Date ..................................................................................38
N Sensitivity .......................................................................................................74
Auto Sensitivity (A) .........................................................................................................75
C Metering .........................................................................................................76
d Exposure Compensation...........................................................................77
Focus/Exposure Lock ........................................................................................78
The AF-L and AE-L Buttons .......................................................................................79
BKT Bracketing......................................................................................................80
O AE BKT ............................................................................................................................80
W ISO BKT ..........................................................................................................................80
X FILM SIMULATION BKT ........................................................................................80
V WHITE BALANCE BKT............................................................................................81
Y DYNAMIC RANGE BKT..........................................................................................81
I Continuous Shooting (Burst Mode) ......................................................82
j Multiple Exposures ......................................................................................83
1
Introduction
6 The Shooting Menus
85
H IMAGE QUALITY SETTING ..........................................................................86
IMAGE SIZE ..........................................................................................................................86
IMAGE QUALITY ...............................................................................................................87
RAW RECORDING ............................................................................................................87
FILM SIMULATION ...........................................................................................................88
GRAIN EFFECT ...................................................................................................................89
COLOR CHROME EFFECT............................................................................................89
DYNAMIC RANGE ............................................................................................................89
WHITE BALANCE ..............................................................................................................90
HIGHLIGHT TONE ............................................................................................................93
SHADOW TONE ................................................................................................................93
COLOR ....................................................................................................................................93
SHARPNESS .........................................................................................................................93
NOISE REDUCTION .........................................................................................................94
LONG EXPOSURE NR .....................................................................................................94
LENS MODULATION OPTIMIZER ............................................................................94
COLOR SPACE ....................................................................................................................94
PIXEL MAPPING ................................................................................................................95
SELECT CUSTOM SETTING.........................................................................................95
EDIT/SAVE CUSTOM SETTING ..................................................................................96
x
Table of Contents
xi
1
Introduction
G AF/MF SETTING .............................................................................................97
FOCUS AREA ......................................................................................................................97
AF MODE ..............................................................................................................................97
STORE AF MODE BY ORIENTATION .......................................................................98
RAPID AF...............................................................................................................................98
AF POINT DISPLAYyz ...........................................................................................98
NUMBER OF THE FOCUS POINTS ..........................................................................99
PRE-AF....................................................................................................................................99
FACE/EYE DETECTION SETTING .......................................................................... 100
AF+MF ................................................................................................................................ 101
MF ASSIST ......................................................................................................................... 101
FOCUS CHECK ................................................................................................................ 102
INTERLOCK SPOT AE & FOCUS AREA................................................................ 102
INSTANT AF SETTING ................................................................................................. 102
DEPTH-OF-FIELD SCALE........................................................................................... 103
RELEASE/FOCUS PRIORITY ..................................................................................... 103
TOUCH SCREEN MODE ............................................................................................. 103
A SHOOTING SETTING .................................................................................. 104
SELF-TIMER ....................................................................................................................... 104
SAVE SELF-TIMER SETTING...................................................................................... 105
INTERVAL TIMER SHOOTING .................................................................................. 105
AE BKT SETTING ............................................................................................................ 106
FILM SIMULATION BKT .............................................................................................. 106
PHOTOMETRY................................................................................................................. 107
SHUTTER TYPE ............................................................................................................... 108
IS MODE ............................................................................................................................. 109
ISO AUTO SETTING ...................................................................................................... 109
MOUNT ADAPTOR SETTING .................................................................................. 110
WIRELESS COMMUNICATION ............................................................................... 112
F FLASH SETTING........................................................................................... 113
FLASH FUNCTION SETTING ................................................................................... 113
RED EYE REMOVAL ...................................................................................................... 113
TTL-LOCK MODE ........................................................................................................... 114
LED LIGHT SETTING .................................................................................................... 114
MASTER SETTING ......................................................................................................... 115
CH SETTING ..................................................................................................................... 115
B MOVIE SETTING .......................................................................................... 116
MOVIE MODE.................................................................................................................. 116
MOVIE AF MODE .......................................................................................................... 116
HDMI OUTPUT INFO DISPLAY............................................................................... 117
HDMI REC CONTROL.................................................................................................. 117
MIC LEVEL ADJUSTMENT ........................................................................................ 117
1
7 Playback and the Playback Menu
Introduction
119
The Playback Display ..................................................................................... 120
The DISP/BACK Button ............................................................................................. 121
Viewing Pictures .............................................................................................. 123
Playback Zoom .............................................................................................................. 124
Multi-Frame Playback ................................................................................................ 124
Playback Touch Controls ......................................................................................... 125
C The Playback Menu ................................................................................... 126
SWITCH SLOT .................................................................................................................. 126
RAW CONVERSION ...................................................................................................... 127
ERASE................................................................................................................................... 129
CROP .................................................................................................................................... 131
RESIZE.................................................................................................................................. 132
PROTECT ............................................................................................................................ 133
IMAGE ROTATE ............................................................................................................... 134
RED EYE REMOVAL ...................................................................................................... 135
VOICE MEMO SETTING ............................................................................................. 136
COPY .................................................................................................................................... 137
WIRELESS COMMUNICATION ............................................................................... 138
PHOTOBOOK ASSIST .................................................................................................. 139
PRINT ORDER (DPOF) ................................................................................................. 141
instax PRINTER PRINT ................................................................................................. 142
DISP ASPECT ................................................................................................................... 143
8 The Setup Menus
145
D USER SETTING ............................................................................................. 146
FORMAT ............................................................................................................................. 146
DATE/TIME ........................................................................................................................ 147
TIME DIFFERENCE ........................................................................................................ 147
a ..................................................................................................................... 148
xii
Table of Contents
xiii
1
Introduction
MY MENU SETTING ..................................................................................................... 148
SENSOR CLEANING ..................................................................................................... 149
BATTERY AGE .................................................................................................................. 149
RESET ................................................................................................................................... 150
D SOUND SETTING ........................................................................................ 151
AF BEEP VOL. ................................................................................................................... 151
SELF-TIMER BEEP VOL. ............................................................................................... 151
OPERATION VOL. ........................................................................................................... 151
HEADPHONES VOLUME ........................................................................................... 152
SHUTTER VOLUME ....................................................................................................... 152
SHUTTER SOUND ......................................................................................................... 152
PLAYBACK VOLUME .................................................................................................... 152
D SCREEN SETTING ........................................................................................ 153
EVF BRIGHTNESS........................................................................................................... 153
EVF COLOR ....................................................................................................................... 153
LCD BRIGHTNESS.......................................................................................................... 153
LCD COLOR ...................................................................................................................... 153
IMAGE DISP. ...................................................................................................................... 154
AUTOROTATE DISPLAYS............................................................................................ 154
PREVIEW EXP./WB IN MANUAL MODE ............................................................. 155
PREVIEW PIC. EFFECT ................................................................................................. 155
FRAMING GUIDELINE ................................................................................................. 156
AUTOROTATE PB ........................................................................................................... 157
FOCUS SCALE UNITS .................................................................................................. 157
DISP. CUSTOM SETTING ............................................................................................ 158
SUB MONITOR SETTING ........................................................................................... 159
D BUTTON/DIAL SETTING ........................................................................... 160
FOCUS LEVER SETTING ............................................................................................. 160
EDIT/SAVE QUICK MENU.......................................................................................... 161
FUNCTION (Fn) SETTING ......................................................................................... 162
SELECTOR BUTTON SETTING ................................................................................ 164
COMMAND DIAL SETTING ..................................................................................... 164
SHUTTER AF..................................................................................................................... 164
SHUTTER AE..................................................................................................................... 165
SHOOT WITHOUT LENS ............................................................................................ 165
FOCUS RING .................................................................................................................... 165
AE/AF-LOCK MODE ..................................................................................................... 165
EXPO. COMP. BUTTON SETTING .......................................................................... 166
TOUCH SCREEN SETTING ........................................................................................ 166
LOCK..................................................................................................................................... 166
D POWER MANAGEMENT ............................................................................ 167
AUTO POWER OFF ....................................................................................................... 167
SHOOTING STAND BY MODE ................................................................................ 167
AUTO POWER SAVE ..................................................................................................... 168
D SAVE DATA SETTING .................................................................................. 169
FRAME NO. ....................................................................................................................... 169
SAVE ORG IMAGE ......................................................................................................... 170
EDIT FILE NAME ............................................................................................................. 170
CARD SLOT SETTING (STILL IMAGE).................................................................. 170
SWITCH SLOT (SEQUENTIAL) ................................................................................. 170
MOVIE FILE DESTINATION ....................................................................................... 171
COPYRIGHT INFO ......................................................................................................... 171
D CONNECTION SETTING ............................................................................ 172
WIRELESS SETTINGS ................................................................................................... 172
PC CONNECTION SETTING..................................................................................... 173
GEOTAGGING SET-UP ................................................................................................ 173
instax PRINTER CONNECTION SETTING ......................................................... 173
PC SHOOT MODE ......................................................................................................... 174
1
Introduction
9 Shortcuts
175
Shortcut Options............................................................................................. 176
The Q (Quick Menu) Button......................................................................... 177
The Quick Menu Display ......................................................................................... 177
Viewing and Changing Settings......................................................................... 178
Editing the Quick Menu ........................................................................................... 179
The Fn (Function) Buttons ........................................................................... 180
Assigning Roles to the Function Buttons...................................................... 182
E MY MENU ...................................................................................................... 184
MY MENU SETTING ..................................................................................................... 185
xiv
Table of Contents
10 Peripherals and Optional Accessories
11 Connections
207
HDMI Output .................................................................................................... 208
Connecting to HDMI Devices .............................................................................. 208
Shooting ............................................................................................................................ 209
Playback ............................................................................................................................. 209
Wireless Transfer .............................................................................................. 210
Wireless Connections: Smartphones ............................................................... 210
Connecting to Computers via USB ........................................................... 211
Tethered Shooting ...................................................................................................... 211
Copying Pictures to a Computer........................................................................ 212
Connecting the Camera .......................................................................................... 213
instax SHARE Printers .................................................................................... 215
Establishing a Connection ..................................................................................... 215
Printing Pictures............................................................................................................ 216
xv
1
Introduction
187
Lenses.................................................................................................................. 188
Lens Parts .......................................................................................................................... 188
Lens Care ........................................................................................................................... 189
Removing Lens Caps ................................................................................................. 189
Attaching Lens Hoods .............................................................................................. 189
Vertical Battery Grips ..................................................................................... 190
Attaching the VB-GF1................................................................................................ 191
Inserting a Battery ....................................................................................................... 192
Viewfinder Tilt Adapters ............................................................................... 194
Attaching the EVF-TL1 .............................................................................................. 195
Using the EVF-TL1 ........................................................................................................ 196
External Flash Units ........................................................................................ 197
Flash Settings ................................................................................................................. 198
SYNC TERMINAL ............................................................................................................ 199
SHOE MOUNT FLASH ................................................................................................ 200
MASTER(OPTICAL) ....................................................................................................... 203
Table of Contents
12 Technical Notes
217
Accessories from FUJIFILM .......................................................................... 218
For Your Safety ................................................................................................. 221
Product Care ..................................................................................................... 230
Cleaning the Image Sensor ......................................................................... 231
Firmware Updates........................................................................................... 232
Checking the Firmware Version .......................................................................... 232
Troubleshooting .............................................................................................. 233
Warning Messages and Displays ............................................................... 239
Memory Card Capacity ................................................................................. 242
Specifications ................................................................................................... 243
1
Introduction
xvi
Supplied Accessories
N The plug adapter supplied with the camera varies with the country
or region of purchase; be sure to use the adapter appropriate to your
country or region as described in the enclosed notice. The viewfinder
can be removed, but the text that follows assumes that it is attached.
xvii
1
Introduction
The following are included with the camera:
• NP-T125 rechargeable battery
• BC-T125 battery charger
• Plug adapter
• EVF-GFX1 interchangeable electronic viewfinder
• Body cap
• Strap clips (× 2)
• Clip locks (× 2)
• Shoulder strap
• Cable protector
• Hot shoe cover (comes attached to hot shoe)
• Sync terminal cap (comes attached to camera)
• Vertical battery grip connector cover (comes attached to
camera)
• Owner’s Manual (this manual)
About This Manual
This manual contains instructions for your FUJIFILM GFX 50S
digital camera. Be sure you have read and understood its
contents before proceeding.
1
Introduction
Symbols and Conventions
The following symbols are used in this manual:
O Information that should be read to prevent damage to the
product.
Additional
information that may be helpful when using the
N
product.
P Pages on which related information may be found.
Menus and other text in the displays are shown in bold. Illustrations
are for explanatory purposes only; drawings may be simplified,
while photographs are not necessarily taken with the model of
camera described in this manual.
Terminology
The optional SD, SDHC, and SDXC memory cards the camera uses
to store pictures are referred to as “memory cards”. The electronic
viewfinder may be referred to as the “EVF” and the LCD monitor
as the “LCD”.
xviii
Before You Begin
1
Parts of the Camera
1
Before You Begin
A Secondary LCD monitor................................ 21
B Drive button ........................................................7
C Secondary monitor backlight button....... 21
D Dial lock release .................................................5
E Shutter speed dial
.......................................................5, 52, 54, 58, 60
N Remote release connector cover ................ 57
O Sync terminal .................................................199
P Lens signal contacts..............................26, 188
Q Lens release button ........................................ 26
R Self-timer lamp .............................................104
S Fn2 button ......................................................180
T Front command dial............................... 6, 164
U ON/OFF switch ................................................. 35
V Shutter button ................................................. 42
W Fn1 button ......................................................180
F Hot shoe .................................................194, 200
G Microphone .............................................47, 117
H Sensitivity dial .....................................5, 74, 109
I Connector cover 1..................29, 57, 208, 213
d (exposure compensation) button ...... 77
J Connector cover 2.........................47, 117, 152
K Tilt lock release....................................................9 X Body cap............................................................ 26
L Battery-chamber cover latch ...................... 30 Y Hot shoe cover ......................................194, 200
M Battery-chamber cover ................................. 30
2
Parts of the Camera
1
Before You Begin
Z LCD monitor..............................................9, 14, 16 j Memory card slot cover latch...................... 32
Touch screen ...........................70, 103, 125, 166 k MENU/OK button .........................................5, 22
a Fn5 button ......................................................180 l Selector buttons ....................................... 5, 164
b Focus stick (focus lever)....................5, 67, 160 m Vertical battery grip connector cover .....190
c Fn4 button ......................................................180 n DISP (display)/BACK button ................17, 121
d Rear command dial ....................... 6, 123, 164 o Speaker .....................................................49, 152
e Fn3 button ......................................................180 p Tripod mount
f Q (quick menu) button ................................177 q Focus mode selector ...................................... 63
g Indicator lamp ....................................8, 29, 193 r b (delete) button ........................................... 44
h Strap anchor .................................................... 24 s a (playback) button ................................... 43
i Memory card slot cover ................................ 32
3
1
Before You Begin
t HDMI Micro connector (Type D) ..............208
u Remote release connector (⌀ 2.5 mm) ..... 57
v 15 V DC-IN connector .................................... 29
w Micro USB (Micro-B) USB 3.0/
USB 2.0 connector..................................57, 213
x Microphone jack (⌀ 3.5 mm) .............47, 117
y Headphone jack ............................................152
z Battery chamber ............................................. 30
0 Battery latch..................................................... 31
1 Memory card slot 1 ........................................ 32
2 Memory card slot 2 ........................................ 32
The Cable Protector
A The cable protector prevents accidental disconnection of the USB
cable or AC adapter. Attach the protector as shown and tighten the lock
screw.
B
Connect the cable and pass it through A
the protector as shown.
B
The Serial Number Plate
Do not remove the serial number plate,
which provides the FCC ID, KC mark, serial number, and other important information.
Serial number plate
4
Parts of the Camera
The Selector
Press the selector up (e), right (h),
down (f), or left (g) to highlight items.
The up, right, down, and left buttons also
double as function buttons Fn6 through
Fn9 (P 180).
The Focus Stick
Tilt or press the focus stick to select the
focus area.
The Shutter Speed and Sensitivity Dials
Press the dial lock release to release the
dial before rotating it to the desired setting. Press the release again to lock the
dial in place.
Sensitivity
Shutter
speed
5
1
Before You Begin
Control Lock
To prevent accidental operation of the selector and the Q and Fn5 buttons
during shooting, press MENU/OK until X is displayed. The controls can be
unlocked by pressing MENU/OK until X is no longer displayed.
The Command Dials
Rotate or press the command dials to:
Front command dial
Rear command dial
1
Before You Begin
• Choose the desired combination
• Choose the desired combinaRotate
Press
6
tion of shutter speed and aperture (program shift)
• Adjust aperture
• Adjust sensitivity when is C selected with the sensitivity dial
• View other pictures during
playback
• Select menu tabs or page
through menus
Switch back and forth between
aperture and sensitivity when C
is selected with sensitivity dial.
of shutter speed and aperture
(program shift)
• Choose a shutter speed
• Adjust exposure compensation
by pressing the d button and
rotating the dial
• Adjust settings in the quick menu
• Choose the size of the focus frame
• Zoom in or out during focus zoom
or in full frame or multi-frame
playback
• Highlight menu items
• Perform the function assigned to
function button Fn10
• Zoom in on the active focus point
during playback
• Press and hold to choose the
manual focus mode focus display
Parts of the Camera
The Drive Button
Pressing the drive button displays the following drive mode options.
1
X
P
40
V
82
80
Y
80
j
80
F
Mode
WHITE BALANCE BKT
(white balance bracketing)
DYNAMIC RANGE BKT
(dynamic range bracketing)
MULTIPLE EXPOSURE
MOVIE
P
81
81
83
46
7
Before You Begin
B
I
O
W
Mode
STILL IMAGE (single frame)
CONTINUOUS (burst mode)
AE BKT (exposure bracketing)
ISO BKT (sensitivity bracketing)
FILM SIMULATION BKT
(film simulation bracketing)
The Indicator Lamp
When the viewfinder is not in use, camera status is shown by the indicator lamp.
1
Before You Begin
Indicator lamp
Glows green
Blinks green
Blinks green and
orange
Glows orange
Blinks orange
Blinks red
Camera status
Focus locked.
Focus or slow shutter speed warning. Pictures can be taken.
Recording pictures. Additional pictures can be taken.
Recording pictures. No additional pictures can be taken at
this time.
Flash charging; flash will not fire when picture is taken.
Lens or memory error.
N Warnings may also appear in the display.
8
Parts of the Camera
The LCD Monitor
The LCD monitor can be tilted for easier viewing, but be careful not to touch
the wires or trap fingers or other objects
behind the monitor. Touching the wires
could cause camera malfunction.
1
Before You Begin
N The LCD monitor also functions as a touch screen (P 70, 125).
“Tall” (Portrait) Orientation
When the camera is rotated to take pictures in
“tall” (portrait) orientation, you can press the tilt
lock release and tilt the display as shown. This
is particularly useful when taking pictures from
low or high angles.
N Hold the camera as shown when taking
“tall” (portrait) orientation pictures from
high angles.
9
The Viewfinder
1
Before You Begin
A Hot shoe .................................................194, 200
B Viewfinder lock releases ................................ 11
C VIEW MODE button ......................................... 16
D Eye sensor.......................................................... 16
E Electronic viewfinder (EVF) ................... 12, 16
F Eye cup ............................................................... 11
G Diopter adjustment control ......................... 11
H Connectors........................................................ 11
I Hot shoe cover
J Connector cover
The EVF-TL1
The optional EVF-TL1 tilt adapter lets you swivel
the viewfinder left or right ±45° or up or down
between 0° and 90° (P194 ).
10
The Viewfinder
Attaching the Viewfinder
Using the viewfinder makes it easier to
frame your subject accurately. Remove
the hot shoe cover from the camera and
slide the viewfinder onto the hot shoe,
stopping when it clicks into place.
1
Before You Begin
Removing the Viewfinder
Keeping the lock releases pressed (A), press
down on the front of the viewfinder (B) and
slide it off as shown.
The Eye Cup
To remove the eye cup, press the bottom
in with both thumbs and slide eye cup
up.
Focusing the Viewfinder
The camera is equipped with diopter
adjustment in the range −4 to +2 m–1 to
accommodate individual differences in
vision. Rotate the diopter adjustment
control until the viewfinder display is in
sharp focus.
11
Camera Displays
This section lists the indicators that may be displayed
during shooting.
O For illustrative purposes, displays are shown with all indicators lit.
The Electronic Viewfinder
1
Before You Begin
1/ 1/ 2017 12:00 AM
5
4
3
2
1
0
-1
-2
-3
-4
-5
1.0
12
GRIP
Camera Displays
* Shows “9999” if there is space for over 9999 frames.
) or manual focus (j) indicator may also be displayed.
† In-focus (
Control Lock
Pressing a locked control displays a X icon.
Display Rotation
When ON is selected for D SCREEN SETTING > AUTOROTATE
DISPLAYS, the indicators in the viewfinder and LCD monitor automatically rotate to match camera orientation.
13
1
Before You Begin
A IS mode ............................................................109 S Histogram ......................................................... 20
B Flash (TTL) mode ..........................................200 T Battery level ...................................................... 36
Flash compensation ....................................200 U Sensitivity .......................................................... 74
C Self-timer indicator ......................................104 V Exposure compensation ............................... 77
D Continuous mode........................................... 82 W Aperture................................................53, 58, 60
E Shutter type ....................................................108 X Shutter speed ......................................53, 54, 60
F AF+MF indicator...........................................101 Y AE lock.......................................................79, 165
TTL lock ......................................... 114, 163, 183
G White balance ................................................. 90
H Film simulation ............................................... 88 Z Metering ............................................................ 76
I Dynamic range ............................................... 89 a Shooting mode................................................ 52
J Location data download status ...............173 b Focus mode † .................................................... 63
K Date and time.........................................37, 147 c AF lock.......................................................79, 165
L Movie mode ............................................46, 116 d Distance indicator .......................................... 73
M Time remaining ............................................... 46 e Recording level ..............................................117
N Card slot options ....................................33, 170 f Exposure indicator................................... 60, 77
O Number of available frames * ....................242 g Virtual horizon................................................. 20
P Image quality and size ........................... 86, 87 h Focus frame ............................................... 67, 78
Q Temperature warning .................................241 i Depth-of-field preview........................... 59, 73
R Control lock .........................................................5 j Focus check .............................................73, 102
The LCD Monitor
1/ 1/ 2017 12:00 AM
1
Before You Begin
GRIP
14
Camera Displays
T Battery level ...................................................... 36
U Sensitivity .......................................................... 74
V Exposure compensation ............................... 77
W Aperture................................................53, 58, 60
X Shutter speed ......................................53, 54, 60
Y AE lock.......................................................79, 165
TTL lock ......................................... 114, 163, 183
Z Metering ............................................................ 76
a Shooting mode................................................ 52
b Focus mode † .................................................... 63
c AF lock.......................................................79, 165
d AF+MF indicator...........................................101
e Shutter type ....................................................108
f Continuous mode........................................... 82
g Exposure indicator................................... 60, 77
h Self-timer indicator ......................................104
i Flash (TTL) mode ..........................................200
Flash compensation ....................................200
* Shows “9999” if there is space for over 9999 frames.
† In-focus (
) or manual focus (j) indicator may also be displayed.
Control Lock
Pressing a locked control displays a X icon.
15
1
Before You Begin
A IS mode ............................................................109
B Focus check .............................................73, 102
C Depth-of-field preview........................... 59, 73
D Recording level ..............................................117
E Distance indicator .......................................... 73
F Location data download status ...............173
G Focus frame ............................................... 67, 78
H Date and time.........................................37, 147
I Movie mode ............................................46, 116
J Time remaining ............................................... 46
K Card slot options ....................................33, 170
L Number of available frames * ....................242
M Temperature warning .................................241
N Image quality and size ........................... 86, 87
O Film simulation ............................................... 88
P White balance ................................................. 90
Q Dynamic range ............................................... 89
R Control lock .........................................................5
S Histogram ......................................................... 20
1
Before You Begin
Choosing a Display Mode
Press the VIEW MODE button to cycle
through the following display modes:
• E EYE SENSOR: Putting your eye to the
viewfinder turns the viewfinder on and
the LCD monitor off ; taking your eye
away turns the viewfinder off and LCD
monitor on.
• EVF ONLY: Viewfinder on, LCD monitor off.
• LCD ONLY: LCD monitor on, viewfinder off.
• EVF ONLY + E: Putting your eye to the viewfinder turns the viewfinder on; taking it away turns the viewfinder off. The LCD monitor remains off.
The Eye Sensor
The eye sensor may respond to objects other
than your eye or to light shining directly on the
sensor.
Eye sensor
Adjusting Display Brightness
The brightness and hue of the viewfinder and LCD monitor can
be adjusted using the items in the D SCREEN SETTING menu.
Choose EVF BRIGHTNESS or EVF COLOR to adjust viewfinder
brightness or hue, LCD BRIGHTNESS or LCD COLOR to do the
same for the LCD monitor.
16
Camera Displays
The DISP/BACK Button
The DISP/BACK button controls the display
of indicators in the viewfinder and LCD
monitor.
1
Full screen
Full screen
(no indicators)
Dual display (manual focus mode
only; P 18)
Standard indicators
Before You Begin
Viewfinder
1.0
Standard (no indicators)
17
LCD Monitor
Standard indicators
No indicators
Dual display
(manual focus mode only)
Info display
1
Before You Begin
The Dual Display
The dual display consists of a large full-frame window and a smaller closeup of the focus area.
18
Camera Displays
Customizing Standard Indicators
To choose the items shown in the standard indicator display:
Display standard indicators.
Press the DISP/BACK button until standard indicators are displayed.
2
Select DISP. CUSTOM SETTING.
Select D SCREEN SETTING > DISP. CUSTOM SETTING in the
setup menu.
3
Choose items.
Highlight items and press MENU/OK to select or deselect.
• FRAMING GUIDELINE
• ELECTRONIC LEVEL
• FOCUS FRAME
• AF DISTANCE INDICATOR
• MF DISTANCE INDICATOR
• HISTOGRAM
• LIVE VIEW HIGHLIGHT ALERT
• SHOOTING MODE
• APERTURE/S-SPEED/ISO
• INFORMATION BACKGROUND
• Expo. Comp. (Digit)
• Expo. Comp. (Scale)
• FOCUS MODE
• PHOTOMETRY
• SHUTTER TYPE
• FLASH
• CONTINUOUS MODE
• DUAL IS MODE
• TOUCH SCREEN MODE
• WHITE BALANCE
• FILM SIMULATION
• DYNAMIC RANGE
• FRAMES REMAINING
• IMAGE SIZE/QUALITY
• MOVIE MODE & REC. TIME
• MIC LEVEL ADJUSTMENT
• BATTERY LEVEL
• FRAMING OUTLINE
4
Save changes.
Press DISP/BACK to save changes.
5
Exit the menus.
Press DISP/BACK as needed to exit the menus and return to the
shooting display.
19
1
Before You Begin
1
1
Virtual Horizon
Selecting ELECTRONIC LEVEL displays a virtual
horizon. The camera is level when the two lines
overlap. Note that the virtual horizon may not
be displayed if the camera lens is pointed up or
down. For a 3D display, press the function button to which ELECTRONIC LEVEL is assigned
(P 162, 182)
Pitch
Roll
Before You Begin
Framing Outline
Enable FRAMING OUTLINE to make the borders of the frame easier to see
against dark backgrounds.
Histograms
Histograms show the distribution of tones in the image. Brightness is
shown by the horizontal axis, the number of pixels by the vertical axis.
Number of pixels
Shadows
Highlights
Pixel brightness
To view separate RGB histograms and a display showing areas of the frame that will be
overexposed at current settings superimposed
on the view through the lens, press the function button to which HISTOGRAM is assigned
(P 162, 182).
Overexposed
areas blink
20
RGB
histograms
Camera Displays
At default settings, the secondary LCD shows the following:
• Text: A SHUTTER SPEED, B APERTURE, C EXPO. COMP., D ISO
• Icons: * E FILM SIMULATION, F WHITE BALANCE, G IMAGE
SIZE , H SHOOTING MODE
The following options are also available:
• Text: MOVIE MODE (icon only) , FRAMES REM. , REC. TIME, NONE
• Icons: PHOTOMETRY, DRIVE MODE , FOCUS MODE, IMAGE QUAL *
*
*
ITY *, BATTERY LEVEL, CARD SLOT OPTIONS, SHUTTER TYPE *, DYNAMIC RANGE *, MOVIE MODE *, NONE
The Secondary Monitor Backlight
To turn on the secondary monitor backlight
when you find the secondary LCD monitor too
dark to read, press the secondary monitor backlight button. Press the button again to turn the
backlight off.
21
1
Before You Begin
The Secondary LCD Monitor
The secondary LCD monitor shows eight
camera settings, four as text (items A to
D) and four as icons (items E to H).
Use D SCREEN SETTING > SUB MONITOR
SETTING to choose the items displayed.
Items for display when you are taking
photographs can be selected separately
from those shown in movie mode; in the
lists that follow, items not available in movie mode are indicated
by asterisks (“*”).
Using the Menus
To display the menus, press MENU/OK.
Shooting
Playback
PLAY BACK MENU
IMAGE QUALITY SETTING
SWITCH SLOT
RAW CONVERSION
IMAGE SIZE
IMAGE QUALITY
1
FILM SIMULATION
ERASE
CROP
GRAIN EFFECT
COLOR CHROME EFFECT
RESIZE
PROTECT
Before You Begin
DYNAMIC RANGE
WHITE BALANCE
IMAGE ROTATE
RED EYE REMOVAL
RAW RECORDING
EXIT
EXIT
To navigate the menus:
1
Press MENU/OK to display the menus.
IMAGE QUALITY SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
GRAIN EFFECT
COLOR CHROME EFFECT
DYNAMIC RANGE
WHITE BALANCE
EXIT
2
Press the selector left to highlight the
tab for the current menu.
画質設定
IMAGE
QUALITY SETTING
画像サイズ
IMAGE
SIZE
画質モード
IMAGE
QUALITY
RAW 記録方式
RAW RECORDING
フィルムシミュレーション
FILM
SIMULATION
グレイン・エフェクト
GRAIN
EFFECT
ダイナミックレンジ
COLOR
CHROME EFFECT
ホワイトバランス
ハイライトトーン
DYNAMIC RANGE
WHITE BALANCE
EXIT
Tab
3
Press the selector up or down to highlight the tab (H, G, A,
F, B, E, C or D) containing the desired item.
4
Press the selector right to place the cursor in the menu.
N Use the front command dial to select menu tabs or page through
menus and the rear command dial to highlight menu items.
22
First Steps
23
Attaching the Shoulder Strap
Attach the strap clips to the shoulder strap and then attach
the strap to the camera.
1
Attach a clip to the strap.
Slide a clip onto the strap (A) and pass the strap through the
strap adjuster and strap retainer (B).
2
Attach the clip to the camera.
Pull the strap upwards (A) until the
clip clicks securely into place (B) in
the ✔ (“correct”) position. If the clip is
in the I (“incorrect”) position, press
the tongue (C) until it clicks into
place in the ✔ position.
3
Repeat Steps 1–2 for the second clip.
2
First Steps
Correct
Incorrect
O Attach the strap as shown.
To avoid dropping the camera, be sure the strap is correctly secured.
24
Attaching the Shoulder Strap
Locking the Clips
Be sure to insert the clip locks after confirming
that clips are correctly attached (P 24). To
prevent the strap becoming detached accidentally, insert the clip locks as shown.
O The clips are small and easily swallowed;
keep out of reach of children.
Be sure that the clips are correctly attached
before inserting the locks (P 24). Failure to observe this precaution could damage the clips.
2
First Steps
Do not attempt to attach the clips with
the locks inserted. Failure to observe this
precaution could damage the clips.
Unclipping the Strap
1
Remove the clip locks.
O Remove the strap from the clips before removing the locks.
2
Grasping both sides of the clip, release it as shown (A) and then slide
it from the anchor (B).
25
Attaching a Lens
The camera can be used with lenses for the FUJIFILM
G-mount.
2
Remove the body cap from the camera
and the rear cap from the lens. Place
the lens on mount, keeping the marks
on the lens and camera aligned, and
then rotate the lens until it clicks into
place.
First Steps
O Be careful not to touch the camera’s internal parts. Do not press the
lens release button while attaching the lens and be sure the latch has
securely clicked into place.
Removing Lenses
To remove the lens, turn the camera off, then
press the lens release button and rotate the
lens as shown.
O To prevent dust accumulating on the lens
or inside the camera, replace the lens caps
and camera body cap when the lens is not
attached.
Lenses and Other Optional Accessories
The camera can be used with lenses and accessories for the FUJIFILM
G-mount.
O Before attaching or removing (exchanging) lenses, attach the lens
caps and check that the lenses are free of dust and other foreign matter. Do not change lenses in direct sunlight or under another bright
light source, as light focused into the interior of the camera could
cause it to malfunction.
26
Charging the Battery
The battery is not charged at shipment. Before proceeding,
use the supplied battery charger to fully charge the battery.
O An
NP-T125 rechargeable battery is supplied with the camera.
Charging takes about 140 minutes.
1
Connect the plug adapter.
The plug adapter supplied with the camera varies with the
country or region of purchase; use the adapter appropriate
to your country or region as described in the enclosed notice.
Place the battery in the charger.
Insert the battery in the orientation
shown by the arrow.
3
Plug the charger in.
Plug the charger into an indoor power outlet. The charging indicator will
light.
4
Charge the battery.
Remove the battery when charging is complete.
First Steps
2
2
27
The Charging Indicator
The charging indicator shows battery charge status as follows:
Battery status
Action
Charging indicator
Battery not inserted.
Insert the battery.
Off
Battery fully charged.
Remove the battery.
On
Battery charging.
—
Unplug the charger and
Blinks
Battery fault.
remove the battery.
2
O Use the charger with the plug adapter for your country or region.
First Steps
Do not affix labels or other objects to the battery. Failure to observe
this precaution could make it impossible to remove the battery from
the camera.
Do not short the battery terminals. The battery could overheat.
Read the cautions in “The Battery and Power Supply”.
Use only battery chargers designated for use with the battery. Failure
to observe this precaution could result in product malfunction.
Do not remove the labels from the battery or attempt to split or peel
the outer casing.
The battery gradually loses its charge when not in use. Charge the
battery one or two days before use. If the battery fails to hold a charge,
it has reached the end of its charging life and must be replaced.
Unplug the charger when it is not in use.
Remove dirt from the battery terminals with a clean, dry cloth. Failure
to observe this precaution could prevent the battery from charging.
Note that charging times increase at low temperatures.
28
Charging the Battery
Charging via AC Adapter
The battery inserted in the camera will also charge when the camera is
powered by an optional AC-15V AC adapter. Charging takes about 120 minutes.
29
2
First Steps
Battery charge status is shown by battery status icons when the camera
is on (playback mode) and by the indicator lamp when the camera is off.
Battery status icon (camera on) Indicator lamp (camera off )
Battery status
Y (yellow)
On
Battery charging
N (green)
Off
Charging complete
Z (red)
Blinks
Battery fault
Inserting the Battery
After charging the battery, insert the battery in the camera
as described below.
1
Open the battery-chamber cover.
Slide the battery-chamber latch as
shown and open the battery-chamber cover.
O Do not remove the battery when the
2
First Steps
camera is on. Failure to observe this
precaution could damage image files
or memory cards.
Do not use excessive force when handling the battery-chamber cover.
2
Insert the battery.
Using the battery to keep the battery
latch pressed to one side, insert the
battery contacts first in the direction
shown by the arrow. Confirm that
the battery is securely latched.
O Insert the battery in the orientation
shown. Do not use force or attempt
to insert the battery upside down or
backwards. The battery will slide in
easily in the correct orientation.
30
Inserting the Battery
3
Close the battery-chamber cover.
Close and latch the cover.
O If the cover does not close, check that
the battery is in the correct orientation. Do not attempt to force the cover shut.
Removing the Battery
Before removing the battery, turn the camera off and open the battery-chamber cover.
First Steps
To remove the battery, press the battery latch to
the side, and slide the battery out of the camera
as shown.
2
O The battery may become hot when used in high-temperature environments. Observe caution when removing the battery.
31
Inserting Memory Cards
Pictures are stored on memory cards (sold separately).
N The camera can be used with two cards, one in each of its two slots.
1
Open the memory card slot cover.
Unlatch and open the cover.
O Do not remove memory cards when
the camera is on. Failure to observe
this precaution could damage image
files or memory cards.
2
First Steps
2
Insert the memory card.
Holding the card in the orientation
shown, slide it in until it clicks into
place at the back of the slot.
O Be sure card is in the correct orienta-
tion; do not insert at an angle or use
force.
3
32
Close the memory card slot cover.
Close and latch the cover.
Inserting Memory Cards
Removing Memory Cards
Before removing memory cards, turn the camera off and open the memory
card slot cover.
Press and release the card to eject it part way (to
prevent the card falling from the slot, press the
center of the card and release it slowly, without
removing your finger from the card). The card
can then be removed by hand.
2
Option
SEQUENTIAL
(default)
Description
The card in the second slot is used only when the
card in the first slot is full. If the second slot is selected for D SAVE DATA SETTING > SWITCH
SLOT (SEQUENTIAL), recording will start on the
card in the second slot and switch to the first slot
when the card in the second slot is full.
BACKUP
Each picture is recorded twice, once to each card.
RAW/JPEG
As for SEQUENTIAL, except that the RAW
copy of pictures taken with FINE + RAW or
NORMAL + RAW selected for H IMAGE QUALITY SETTING > IMAGE QUALITY will be saved
to the card in the first slot and the JPEG copy to the
card in the second slot.
Display
The card used to store movies can be selected using D SAVE
DATA SETTING > MOVIE FILE DESTINATION.
33
First Steps
Using Two Cards
The camera can be used with two cards, one in each of its two
slots. At default settings, photos are saved to the card in the second slot only when the card in the first slot is full. This can be
changed using D SAVE DATA SETTING > CARD SLOT SETTING
(STILL IMAGE).
Inserting Memory Cards
2
Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have
been approved for use in the camera; UHS-II cards can be used
in both slots, while cards with a UHS speed class of 1 or better are recommended for movies. A complete list of approved
memory cards is available at http://www.fujifilm.com/support/
digital_cameras/compatibility/. Operation is not guaranteed with
other cards. The camera can not be used with xD-Picture Cards
or MultiMediaCard (MMC) devices.
First Steps
O Do not turn the camera off or remove the memory card while the memory
card is being formatted or data are being recorded to or deleted from the
card. Failure to observe this precaution could damage the card.
Memory cards can be locked, making it impossible to format the card or to record or
delete images. Before inserting a memory
card, slide the write-protect switch to the
unlocked position.
Format memory cards before first use, and be sure to reformat all
memory cards after using them in a computer or other device.
Memory cards are small and can be swallowed; keep out of reach of children.
If a child swallows a memory card, seek medical assistance immediately.
miniSD or microSD adapters that are larger or smaller than memory
cards may not eject normally; if the card does not eject, take the camera
to an authorized service representative. Do not forcibly remove the card.
Do not affix labels or other objects to memory cards. Peeling labels
can cause camera malfunction.
Movie recording may be interrupted with some types of memory card.
Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete this folder or use a computer
or other device to edit, delete, or rename image files. Always use the
camera to delete pictures; before editing or renaming files, copy them
to a computer and edit or rename the copies, not the originals. Renaming the files on the camera can cause problems during playback.
34
Turning the Camera On and Off
Use the ON/OFF switch to turn the camera on and off.
Rotate the switch to ON to turn the camera on, or to OFF to turn the camera off.
O Fingerprints and other marks on the lens or viewfinder can affect picN Press the a button to start playback. Press the shutter button halfway
to return to shooting mode.
The camera will turn off automatically if no operations are performed
for the length of time selected for D POWER MANAGEMENT > AUTO
POWER OFF. To reactivate the camera after it has turned off automatically, press the shutter button halfway or turn the ON/OFF switch to OFF
and then back to ON.
35
First Steps
tures or the view through the viewfinder. Keep the lens and viewfinder clean.
2
Checking the Battery Level
After turning the camera on, check the battery level in the
display.
Battery level is shown as follows:
2
First Steps
Indicator
e
f
g
h
i
i
(red)
j
(blinks red)
36
Description
Battery partially discharged.
Battery about 80% full.
Battery about 60% full.
Battery about 40% full.
Battery about 20% full.
Low battery. Charge as soon as possible.
Battery exhausted. Turn camera off
and recharge battery.
Basic Setup
A language-selection dialog is displayed the first time the
camera is turned on.
1
Turn the camera on.
A language-selection dialog will be
displayed.
2
First Steps
2
Choose a language.
Highlight a language and press
MENU/OK.
3
Set the date and time.
DATE/TIME NOT SET
Press the selector left or right to
highlight the year, month, day, hour,
2015
2016
or minute and press up or down
YY.MM.DD 2017 . 1 . 1 12 : 00 AM
2018
to change. To change the order in
2019
which the year, month, and day are
displayed, highlight the date format
and press the selector up or down.
Press MENU/OK to exit to shooting mode when settings are
complete.
SET
NO
37
Basic Setup
N If the battery is removed for an extended period, the camera clock will
be reset and the language-selection dialog will be displayed when the
camera is turned on.
Skipping the Current Step
Press DISP/BACK to skip the current step. Any steps you skip will be displayed
the next time the camera is turned on.
2
Choosing a Different Language
To change the language:
First Steps
1
Display language options.
Select D USER SETTING > a.
2
Choose a language.
Highlight the desired option and press MENU/OK.
Changing the Time and Date
To set the camera clock:
1
Display DATE/TIME options.
Select D USER SETTING > DATE/TIME.
2
Set the clock.
Press the selector left or right to highlight the year, month,
day, hour, or minute and press up or down to change. Press
MENU/OK to set the clock.
38
Basic Photography and
Playback
39
Taking Photographs (Mode P)
This section describes how to take pictures using program
AE (mode P). See pages 52–61 for information on S, A,
and M modes.
1
Adjust settings for program AE.
A
C
B
D
3
Basic Photography and Playback
A Aperture (P 52): Select A (auto).
B Sensitivity (P 74): Select A (auto).
C Shutter speed (P 52): Select A (auto).
D Focus mode (P 63): Select S (single AF).
N To use the shutter speed and sensitivity dials, press the dial lock
release and rotate the dial to the desired setting.
2
40
Check the shooting mode.
Confirm that P appears in the display.
Taking Photographs (Mode P)
3
Ready the camera.
Hold the camera steady with both
hands and brace your elbows against
your sides. Shaking or unsteady
hands can blur your shots.
To prevent pictures that are out of focus or too dark (underexposed), keep
your fingers and other objects away
from the lens.
Basic Photography and Playback
4
3
Frame the picture.
Lenses with Zoom Rings
Use the zoom ring to frame the picture in
the display. Rotate the ring left to zoom
out, right to zoom in.
41
Taking Photographs (Mode P)
5
Focus.
Press the shutter button halfway to
focus.
Focus
indicator
Focus frame
If the camera is able to focus, it will beep twice and focus area and
focus indicator will glow green. Focus and exposure will lock
while the shutter button is pressed halfway.
3
Basic Photography and Playback
If the camera is unable to focus, the focus frame will turn red, s
will be displayed, and the focus indicator will blink white.
6
42
Shoot.
Smoothly press the shutter button the rest of the way down
to take the picture.
a Viewing Pictures
Pictures can be viewed in the viewfinder or LCD monitor.
To view pictures full frame, press a.
100-0001
N Pictures taken using other cameras are marked with a m (“gift image”)
icon to warn that they may not display correctly and that playback
zoom may not be available.
Two Memory Cards
If two memory cards are inserted, you can press and hold the a button
to choose a card for playback. You can also select a card using the C PLAY
BACK MENU > SWITCH SLOT option.
43
3
Basic Photography and Playback
Additional pictures can be viewed by pressing the selector left
or right or rotating the front command dial. Press the selector or
rotate the dial right to view pictures in the order recorded, left to
view pictures in reverse order. Keep the selector pressed to scroll
rapidly to the desired frame.
b Deleting Pictures
Use the b button to delete pictures.
O Deleted pictures can not be recovered. Copy important pictures to a
computer or other storage device before proceeding.
1
With a picture displayed full frame, press the b button and
select FRAME.
ERASE
FRAME
SELECTED FRAMES
ALL FRAMES
3
Basic Photography and Playback
2
Press the selector left or right to scroll through pictures and
press MENU/OK to delete (a confirmation dialog is not displayed). Repeat to delete additional pictures.
N Protected pictures can not be deleted. Remove protection from any
pictures you wish to delete (P 133).
Pictures can also be deleted from the menus using the C PLAY BACK
MENU > ERASE option (P 129).
44
Movie Recording and
Playback
45
F Recording Movies
This section describes how to film movies in auto mode.
1
2
Press the drive mode button and select F MOVIE.
Adjust settings for program AE.
A
C
B
D
4
Movie Recording and Playback
A Aperture (P 52): Select A (auto).
B Sensitivity (P 74): Select A (auto).
C Shutter speed (P 52): Select A (auto).
D Focus mode (P 63): Select S (single AF).
N To use the shutter speed and sensitivity dials, press the dial lock
release and rotate the dial to the desired setting.
3
Press the shutter button to start recording. A recording indicator (V)
and the time remaining are displayed
while recording is in progress.
5
4
3
2
1
0
-1
-2
-3
-4
-5
46
Recording Movies
4
Press the button again to end recording. Recording ends
automatically when the maximum length is reached or the
memory card is full.
O Sound is recorded via the built-in microphone or an optional external
microphone. Do not cover the microphone during recording. Note
that the microphone may pick up lens noise and other sounds made
by the camera during recording.
Vertical or horizontal streaks may appear in movies containing very
bright subjects. This is normal and does not indicate a malfunction.
N The indicator lamp lights while recording is in progress.
During recording, you can change exposure compensation by up to ±2 EV and
adjust zoom using the zoom ring on the lens (if available).
Recording may be unavailable at some settings, while in other cases
settings may not apply during recording.
Using an External Microphone
Sound can be recorded with external microphones that connect using jacks 3.5 mm in
diameter; microphones that require plug-in
power can not be used. See the microphone
manual for details.
47
4
Movie Recording and Playback
If the lens is equipped with an aperture mode switch, select the aperture mode before beginning recording. If an option other than A is
selected, shutter speed and aperture can be adjusted while recording
is in progress.
Recording Movies
Adjusting Movie Settings
Frame size and rate can be selected using B MOVIE SETTING >
MOVIE MODE, while the card used to store movies can be selected using D SAVE DATA SETTING > MOVIE FILE DESTINATION.
Focus mode is selected using the focus mode selector; for continuous focus adjustment, select C, or choose S and enable Intelligent Face Detection. Intelligent Face Detection is not available
in focus mode M.
Depth of Field
Choose low f-numbers to soften background details.
4
Movie Recording and Playback
48
a Viewing Movies
View movies on the camera.
In full-frame playback, movies are identified by a W icon.
1/1/2017 12:00 AM
PLAY
±0
The following operations can be performed while a movie is displayed:
4
Playback in
progress ((x
x)
e
f
gh
Pause playback
Adjust speed
Playback
paused (y
(y)
End playback
Start/resume playback
Single frame rewind/advance
Progress is shown in the display during
playback.
29m59s
O Do not cover the speaker during playback.
STOP
PAUSE
N Press MENU/OK to pause playback and display volume controls. Press
the selector up or down to adjust the volume; press MENU/OK again
to resume playback. Volume can also be adjusted using D SOUND
SETTING > PLAYBACK VOLUME.
49
Movie Recording and Playback
Selector
Viewing Movies
Playback Speed
Press the selector left or right to adjust playback
speed during playback. Speed is shown by the
number of arrows (M or N).
29m59s
STOP
Arrows
4
Movie Recording and Playback
50
PAUSE
Taking Photographs
51
P, S, A, and M Modes
P, S, A, and M modes give you varying degrees of control
over shutter speed and aperture.
Mode P: Program AE
Let the camera choose shutter speed and aperture for optimal
exposure. Other values that produce the same exposure can be
selected with program shift.
Shutter speed: Select A (auto).
5
Aperture: Select A (auto).
Taking Photographs
Set shutter speed and aperture to A (auto)
and confirm that P appears in the display.
O If the subject is outside the metering range of the camera, the shutter
speed and aperture displays will show “– – –”.
N To use the shutter speed dial, press the dial lock release and rotate the
dial to the desired setting.
52
P, S, A, and M Modes
Program Shift
If desired, you can rotate the rear command dial
to select other combinations of shutter speed
and aperture without altering exposure (program shift).
Shutter speed
Aperture
O Program shift is not available during movie recording or if the flash
supports TTL auto or an auto option is selected for H IMAGE QUALITY SETTING > DYNAMIC RANGE.
N To cancel program shift, turn the camera off.
5
Taking Photographs
53
Mode S: Shutter-Priority AE
Choose a shutter speed and let the camera adjust aperture for
optimal exposure.
Shutter speed: Choose a speed.
Aperture: Select A (auto).
Set aperture to A (auto) and use the shutter speed dial to choose a shutter speed.
S will appear in the display.
5
Taking Photographs
O If the correct exposure can not be achieved at the selected shutter
speed, aperture will be displayed in red. If the subject is outside the
metering range of the camera, the aperture display will show “– – –”.
N To use the shutter speed dial, press the dial lock release and rotate the
dial to the desired setting (the dial can be used even while the shutter
button is pressed halfway). Shutter speed can also be adjusted in increments of 1⁄3 EV by rotating the rear command dial.
54
P, S, A, and M Modes
Time (T)
Rotate the shutter speed dial to T (time) to choose slow shutter
speeds for long time-exposures. Use of a tripod is recommended
to prevent the camera moving during the exposure.
1
Rotate the shutter speed dial to T.
2
Rotate the rear command dial to
choose a shutter speed.
5
Press the shutter button all the way down to take a picture
at the selected shutter speed. A count-down timer will be
displayed while the exposure is in progress.
N To reduce “noise” (mottling) in long time-exposures, select ON for
H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that this
may increase the time needed to record images after shooting.
55
Taking Photographs
3
Bulb (B)
Select a shutter speed of B (bulb) for long time-exposures in
which you open and close the shutter manually. Use of a tripod
is recommended to prevent the camera moving during the exposure.
5
1
Rotate the shutter speed dial to B.
2
Press the shutter button all the way down. The shutter will
remain open for up to 60 minutes while the shutter button
is pressed; the display shows the time elapsed since the exposure started.
Taking Photographs
N Selecting an aperture of A fixes shutter speed at 30 s.
To reduce “noise” (mottling) in long time-exposures, select ON for
H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that this
may increase the time needed to record images after shooting.
56
P, S, A, and M Modes
Using a Remote Release
An optional RR-90 remote release can be used
for long time-exposures. The RR-90 connects
via the Micro USB (Micro-B) USB 2.0 connector.
Alternatively, electronic releases from third-party suppliers can be connected via the remote
release connector (⌀2.5 mm 3-pole mini jack)
5
Taking Photographs
57
Mode A: Aperture-Priority AE
Choose an aperture and let the camera adjust shutter speed for
optimal exposure.
Shutter speed: Select A (auto).
Aperture: Choose an aperture.
Rotate the shutter speed dial to A (auto),
and rotate the lens aperture ring to adjust aperture as desired. A will appear in
the display.
5
Taking Photographs
O If the correct exposure can not be achieved at the selected aperture,
shutter speed will be displayed in red. If the subject is outside the metering range of the camera, the shutter speed display will show “– – –”.
N To use the shutter speed dial, press the dial lock release and rotate the
dial to the desired setting.
Aperture can be adjusted even while the shutter button is pressed
halfway.
58
P, S, A, and M Modes
Previewing Depth of Field
When PREVIEW DEPTH OF FIELD is assigned
to a function button, pressing the button displays a L icon and stops aperture down to the
selected setting, allowing depth of field to be
previewed in the display.
N Depth of field can also be previewed using
the depth-of-field indicator in the standard
display. Press DISP/BACK to cycle through
display modes until standard indicators are
displayed. In autofocus mode, the depthof-field indicator is displayed when the
shutter button is pressed halfway.
Depth of field
59
5
Taking Photographs
Use the G AF/MF SETTING > DEPTH-OF-FIELD SCALE option to
choose how depth of field is displayed. Choose FILM FORMAT BASIS
to help you make practical assessments of depth of field for pictures
that will be viewed as prints and the like, PIXEL BASIS to help you
assess depth of field for pictures that will be viewed at high resolutions
on computers or other electronic displays.
Mode M: Manual Exposure
Alter exposure from that selected by the camera.
Shutter speed: Choose a speed.
Aperture: Choose an aperture.
Set shutter speed to a value other than
A, and rotate the lens aperture ring to
choose the aperture. M will appear in the
display.
5
N To use the shutter speed dial, press the dial lock release and rotate the
Taking Photographs
dial to the desired setting. Shutter speed can be adjusted in increments of 1⁄3 EV by rotating the rear command dial.
60
P, S, A, and M Modes
Exposure Preview
To preview exposure in the LCD monitor, select an option other than OFF
for D SCREEN SETTING > PREVIEW EXP./WB IN MANUAL MODE. Select
OFF when using the flash or on other occasions on which exposure may
change when the picture is taken.
5
Taking Photographs
61
Autofocus
Take pictures using autofocus.
1
Rotate the focus mode selector to S
or C (P 63).
2
Use G AF/MF SETTING > AF MODE to choose an AF mode
(P 65).
3
Choose the position and size of the
focus frame (P 67).
4
Take pictures.
5
Taking Photographs
N For information on the autofocus system, visit:
http://fujifilm-x.com/af/en/index.html
62
Autofocus
Focus Mode
Use the focus mode selector to choose
how the camera focuses.
Choose from the following options:
Mode
S
(AF-S)
C
(AF-C)
M
(manual)
Description
Single AF: Focus locks while the shutter button is pressed halfway.
Choose for stationary subjects.
Continuous AF: Focus is continually adjusted to reflect changes in the
distance to the subject while the shutter button is pressed halfway.
Use for subjects that are in motion. Eye-detection AF is not available.
Manual: Focus manually using the lens focus ring. Choose for manual
control of focus or in situations in which the camera is unable to focus
using autofocus (P 71).
lens is in manual focus mode.
If ON is selected for G AF/MF SETTING > PRE-AF, focus will be adjusted continuously in modes S and C even when the shutter button
is not pressed.
63
Taking Photographs
N Regardless of the option selected, manual focus will be used when the
5
The Focus Indicator
The focus indicator turns green when the subject is in focus and blinks white when the camera is unable to focus. Brackets (“( )”) indicate
that the camera is focusing and are displayed
continuously in mode C. j is displayed in
manual focus mode.
Focus indicator
5
Taking Photographs
64
Autofocus
Autofocus Options (AF Mode)
Choose how the camera focuses in modes S and C.
1
2
3
Press MENU/OK and go to the shooting menu.
Select G AF/MF SETTING > AF MODE.
Choose an AF mode.
N This feature can also be accessed via shortcuts (P 176).
How the camera focuses depends on the focus mode.
Focus Mode S (AF-S)
Option
Description
Sample image
Camera focuses on subject in
selected focus point. Use for pinSINGLE POINT
point focus on selected subject.
r
Taking Photographs
y
ZONE
5
Camera focuses on subject in selected focus zone. Focus zones include multiple focus points, making it easier to focus on subjects in
motion.
Camera focuses automatically on
high-contrast subjects; display
WIDE/TRACKING
shows areas in focus.
z
65
Focus Mode C (AF-C)
Option
Description
Focus tracks subject at selected focus point. Use for subjects moving
SINGLE POINT
toward or away from camera.
r
y
ZONE
5
Focus tracks subject in selected focus zone. Use for subjects that are
moving fairly predictably.
Focus tracks subjects moving
z
WIDE/TRACKING through wide area of frame.
Taking Photographs
66
Sample image
Autofocus
Focus-Point Selection
Choose a focus point for autofocus.
Viewing the Focus-Point Display
1
2
3
Press MENU/OK and go to the shooting menu.
Select G AF/MF SETTING > FOCUS AREA to view the focus-point display.
Use the focus stick and rear command dial to choose a focus
area.
Selecting a Focus Point
Use touch controls or the focus stick (focus lever) to choose the focus point and
the rear command dial to choose the size
of the focus frame. The procedure varies
with the option selected for AF mode.
Taking Photographs
Focus stick
5
Rear command dial
AF mode
Tilt
Press
Select focus
point
Select center
focus point
r
y
z
Rotate
Press
Choose from 6
frame sizes
Restore original
size
Choose from 3
frame sizes
—
N Manual focus-point selection is not available when z WIDE/TRACKING is selected in focus mode S.
67
The Focus-Point Display
The focus-point display varies with the option selected for AF
mode.
N Focus frames are shown by small squares (), focus zones by the large
squares.
r SINGLE POINT
5
AF mode
y ZONE
z WIDE/TRACKING
Taking Photographs
Number of points avail- Choose from zones with Position focus frame over
able can be selected using 7 × 7, 5 × 5, or 3 × 3 focus subject and press MENU/OK.
G AF/MF SETTING > points.
NUMBER OF THE FOCUS
POINTS.
68
Autofocus
Autofocus
Although the camera boasts a high-precision autofocus system, it may be
unable to focus on the subjects listed below.
• Very shiny subjects such as mirrors or car bodies.
• Subjects photographed through a window or other reflective object.
• Dark subjects and subjects that absorb rather than reflect light, such as
hair or fur.
• Insubstantial subjects, such as smoke or flame.
• Subjects that show little contrast with the background.
• Subjects positioned in front of or behind a high-contrast object that is
also in the focus frame (for example, a subject photographed against a
backdrop of highly contrasting elements).
Checking Focus
To zoom in on the current focus area for precise
focus, press the control to which focus zoom
has been assigned (at default settings, the center of the rear command dial). Press the control
again to cancel zoom.
5
Taking Photographs
Normal display
Focus zoom
N In focus mode S, zoom can be adjusted by rotating the rear command
dial. Focus zoom is not available in focus mode C or when G AF/MF
SETTING > PRE-AF is on or an option other than r SINGLE POINT is
selected for AF MODE.
To assign focus zoom to a control, select FOCUS CHECK for D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING.
69
Touch Focus Controls
Use the touch screen to focus when taking photographs.
Tap the touch screen mode indicator in
the shooting display to cycle through the
following touch-screen modes:
Mode
AF
Description
Tap the display to select a focus point and lock focus. The shutter can be released by pressing the shutter button all the way
down.
AREA
Tap the display to move the focus frame to the selected point.
The selected point will be used for focus and focus zoom.
5
Taking Photographs
OFF
Touch controls off.
N Touch control settings can be adjusted using G AF/MF SETTING >
TOUCH SCREEN MODE. To disable touch controls and hide the touch
screen mode indicator, select OFF for D BUTTON/DIAL SETTING >
TOUCH SCREEN SETTING.
70
Manual Focus
Adjust focus manually.
1
Rotate the focus mode selector to M.
j will appear in the display.
32
Focus manually using the lens focus
ring. Rotate the ring left to reduce
the focus distance, right to increase.
3
Take pictures.
5
N Use D BUTTON/DIAL SETTING > FOCUS RING to reverse the direction of rotation of the focus ring.
Regardless of the option selected, manual focus will be used when the
lens is in manual focus mode.
71
Taking Photographs
2
Quick Focus
To use autofocus to focus on the subject in the selected focus area, press
the button to which focus lock or AF-ON has been assigned (the size of the
focus area can be chosen with the rear command dial). In manual focus
mode, you can use this feature to quickly focus on a chosen subject using
either single or continuous AF according to the option chosen for G AF/
MF SETTING > INSTANT AF SETTING.
5
Taking Photographs
72
Manual Focus
Checking Focus
A variety of options are available for checking focus in manual
focus mode.
The Manual Focus Indicator
Focus distance
The manual focus indicator indicates
(white line)
how closely the focus distance matches
the distance to the subject in the focus
brackets. The white line indicates the
distance to the subject in the focus area
Depth of field
(in meters or feet according to the option
selected for D SCREEN SETTING > FOCUS SCALE UNITS in the
setup menu), the blue bar the depth of field, or in other words
the distance in front of and behind the subject that appears to
be in focus.
N If STANDARD or FOCUS PEAK HIGHLIGHT is selected for G AF/MF
SETTING > MF ASSIST, zoom can be adjusted by rotating the rear
command dial.
Focus Peaking
Select FOCUS PEAK HIGHLIGHT for
G AF/MF SETTING > MF ASSIST to highlight high-contrast outlines. When focusing, rotate the focus ring until the subject
is highlighted.
N The MF ASSIST menu can be displayed by pressing and holding the
center of the rear command dial.
73
5
Taking Photographs
Focus Zoom
If ON is selected for G AF/MF SETTING > FOCUS CHECK, the
camera will automatically zoom in on the selected focus area
when the focus ring is rotated.
N Sensitivity
Adjust the camera’s sensitivity to light.
Press the sensitivity dial lock release, rotate the dial to the desired setting, and
press the release again to lock the dial in
place.
Option
A (auto)
C (command)
5
Taking Photographs
12800–100
Description
Sensitivity is automatically adjusted in response to shooting
conditions according to option chosen for A SHOOTING
SETTING > ISO AUTO SETTING. Choose from AUTO 1,
AUTO 2, and AUTO 3.
Sensitivity can be set by rotating the front command dial.
Choose from values of from 100 to 12800 or select “extended”
values of ISO 50 or of ISO 25600 or higher.
Adjust sensitivity manually. Selected value is shown in display.
Adjusting Sensitivity
High values can be used to reduce blur when lighting is poor, while lower
values allow slower shutter speeds or wider apertures in bright light; note,
however, that mottling may appear in pictures taken at high sensitivities.
74
Sensitivity
Auto Sensitivity (A)
Use A SHOOTING SETTING > ISO AUTO SETTING to choose
the base sensitivity, maximum sensitivity, and minimum shutter speed for the A position on the sensitivity dial. Settings for
AUTO 1, AUTO 2, and AUTO 3 can be stored separately; the defaults are shown below.
Option
DEFAULT SENSITIVITY
MAX. SENSITIVITY
MIN. SHUTTER SPEED
AUTO 1
800
Default
AUTO 2
100
1600
⁄ s
AUTO 3
3200
The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the
default value if the shutter speed required for optimal exposure
would be slower than the value selected for MIN. SHUTTER SPEED.
lected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to
the value selected for MAX. SENSITIVITY.
The camera may select shutter speeds slower than MIN. SHUTTER
SPEED if pictures would still be underexposed at the value selected
for MAX. SENSITIVITY.
75
5
Taking Photographs
N If the value selected for DEFAULT SENSITIVITY is higher than that se-
C Metering
Choose how the camera meters exposure.
A SHOOTING SETTING > PHOTOMETRY offers a choice of the
following metering options:
O The selected option will only take effect when G AF/MF SETTING >
FACE/EYE DETECTION SETTING is OFF.
Mode
v
(spot)
p
(centerweighted)
o
5
(multi)
Taking Photographs
w
(average)
76
Description
The camera meters lighting conditions in an area at the center of the
frame equivalent to 2% of the total. Recommended with backlit subjects and in other cases in which the background is much brighter or
darker than the main subject.
The camera meters the entire frame but assigns the greatest weight
to the area at the center.
The camera instantly determines exposure based on an analysis of
composition, color, and brightness distribution. Recommended in
most situations.
Exposure is set to the average for the entire frame. Provides consistent exposure across multiple shots with the same lighting, and is
particularly effective for landscapes and portraits of subjects dressed
in black or white.
d Exposure Compensation
Adjust exposure.
Hold the d button and rotate the rear
command dial until the desired value is
displayed in the viewfinder or LCD monitor.
O The amount of compensation available varies with the shooting mode.
The d Button
If ON/OFF SWITCH is selected for D BUTTON/DIAL SETTING > EXPO.
COMP. BUTTON SETTING, exposure compensation can be set by pressing
the d button once, rotating the rear command dial, and then pressing the
d button again. Exposure compensation can be assigned to other controls using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING.
5
Taking Photographs
77
Focus/Exposure Lock
Compose photographs with off-center subjects.
5
1
Focus: Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain
locked while the shutter button is
pressed halfway (AF/AE lock).
2
Recompose: Keep the shutter button
pressed halfway.
3
Shoot: Press the button all the way down.
Taking Photographs
N Focus lock using the shutter button is only available when ON is selected for D BUTTON/DIAL SETTING > SHUTTER AF, SHUTTER AE.
78
Focus/Exposure Lock
The AF-L and AE-L Buttons
Focus and exposure can also be locked
using function buttons. At default settings, the Fn4 button locks focus, the Fn5
button exposure. Focus and/or exposure
will remain locked while the button is
pressed, whether or not the shutter button is pressed halfway.
Fn5 button
(exposure lock)
5
Taking Photographs
The roles of the buttons can be changed
using the following D BUTTON/DIAL
SETTING options:
• FUNCTION (Fn) SETTING: Choose the
roles played by the function buttons.
• AE/AF-LOCK MODE: If AE&AF ON/OFF
SWITCH is selected for AE/AF-LOCK
MODE, focus and/or exposure lock
when the button is pressed and remain
locked until the button is pressed again.
Fn4 button
(focus lock)
79
BKT Bracketing
Automatically vary settings over a series of pictures.
Press the drive button and choose from the options below.
O AE BKT
Use A SHOOTING SETTING > AE BKT SETTING to choose the
bracketing amount and number of shots. Each time the shutter
button is pressed, the camera will take the specified number of
shots: one using the metered value for exposure and the others
over- or under-exposed by multiples of the selected bracketing
amount.
N Regardless of the bracketing amount, exposure will not exceed the
limits of the exposure metering system.
5
W ISO BKT
Taking Photographs
Select a bracketing amount (±1, ±2⁄3, or ±1⁄3). Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with
sensitivity raised and the other with sensitivity lowered by the
selected amount.
X FILM SIMULATION BKT
Each time the shutter is released, the camera takes one shot and
processes it to create copies with different film simulation settings, chosen using A SHOOTING SETTING > FILM SIMULATION
BKT.
80
Bracketing
V WHITE BALANCE BKT
Select a bracketing amount (±1, ±2, or ±3). Each time the shutter
is released, the camera takes one shot and processes it to create
three copies: one at the current white balanced setting, one with
fine-tuning increased by the selected amount, and another with
fine-tuning decreased by the selected amount.
Y DYNAMIC RANGE BKT
Each time the shutter button is pressed, the camera takes three
shots with different dynamic ranges: 100% for the first, 200% for
the second, and 400% for the third.
N While dynamic range bracketing is in effect, sensitivity will be restrict-
ed to a minimum of ISO 400 (or to a minimum of ISO 100 to 400 when
an auto option is selected for sensitivity); the sensitivity previously in
effect is restored when bracketing ends.
5
Taking Photographs
81
I Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
Press the drive button and select I CONTINUOUS. The camera
will take pictures while the shutter button is pressed; shooting
ends when the shutter button is released or the memory card is
full.
O If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder.
Burst shooting may not begin if the space available on the memory
card is insufficient.
Frame rate varies with the subject, shutter speed, sensitivity, and focus
mode. Frame rates may slow and recording times increase as more
shots are taken. The flash may or may not fire, depending on shooting
conditions.
5
Taking Photographs
Exposure
To vary exposure with each shot, select OFF for D BUTTON/DIAL SETTING > SHUTTER AE.
N Depending on such factors as aperture, sensitivity, and exposure compensation, exposure may not be adjusted automatically.
82
j Multiple Exposures
Create a photograph that combines two exposures.
1
2
3
Press the drive button and select j MULTIPLE EXPOSURE.
Take the first shot.
Press MENU/OK. The first shot will be
shown superimposed on the view
through the lens and you will be
prompted to take the second shot.
N To return to Step 2 and retake the first
NEXT
RETRY
4
5
EXIT
Taking Photographs
shot, press the selector left. To save
the first shot and exit without creating
a multiple exposure, press DISP/BACK.
Take the second shot, using the first
frame as a guide.
EXIT
30
5
2.0
Press MENU/OK to create the multiple
exposure, or press the selector left to
return to Step 4 and retake the second shot.
RETRY
EXIT
O Multiple exposures can not be recorded via tethered shooting (P 174).
83
MEMO
84
The Shooting Menus
85
H IMAGE QUALITY SETTING
Adjust image quality settings.
To display image quality settings, press
MENU/OK in the shooting display and select the H (IMAGE QUALITY SETTING)
tab.
画質設定
IMAGE
QUALITY SETTING
画像サイズ
IMAGE
SIZE
画質モード
IMAGE
QUALITY
RAW 記録方式
RAW RECORDING
フィルムシミュレーション
FILM
SIMULATION
グレイン・エフェクト
GRAIN
EFFECT
ダイナミックレンジ
COLOR
CHROME EFFECT
ホワイトバランス
ハイライトトーン
DYNAMIC
RANGE
WHITE BALANCE
EXIT
N
The options available vary with the shooting mode selected.
IMAGE SIZE
Choose the size and aspect ratio at which still pictures are recorded.
Option
O4:3
O3:2
O 16 : 9
O1:1
O 65 : 24
O5:4
O7:6
6
The Shooting Menus
Image size
8256 × 6192
8256 × 5504
8256 × 4640
6192 × 6192
8256 × 3048
7744 × 6192
7232 × 6192
Option
Q4:3
Q3:2
Q 16 : 9
Q1:1
Q 65 : 24
Q5:4
Q7:6
Image size
4000 × 3000
4000 × 2664
4000 × 2248
2992 × 2992
4000 × 1480
3744 × 3000
3504 × 3000
N IMAGE SIZE is not reset when the camera is turned off or another
shooting mode is selected.
86
IMAGE QUALITY SETTING
IMAGE QUALITY
Choose a file format and compression ratio. Select SUPER FINE
(minimum compression), FINE (low compression), or NORMAL
(high compression) to record JPEG images, RAW to record RAW
images, or SUPER FINE+RAW, FINE+RAW, or NORMAL+RAW to
record both JPEG and RAW images. With JPEG images, the lower
the compression ratio, the higher the quality of the image, while
higher compression ratios allow more images to be stored in the
same amount of memory.
The Function Buttons
To toggle RAW image quality on or off for a single shot, assign RAW to a
function button (P 182). If a JPEG option is currently selected for image
quality, pressing the button temporarily selects the equivalent JPEG+RAW
option. If a JPEG+RAW option is currently selected, pressing the button
temporarily selects the equivalent JPEG option, while if RAW is selected,
pressing the button temporarily selects FINE. Taking a picture or pressing
the button again restores the previous setting.
RAW RECORDING
Choose whether to compress RAW images.
LOSSLESS COMPRESSED
Description
RAW images are not compressed.
RAW images are compressed using a reversible algorithm
that reduces file size with no loss of image data. The images can be viewed in RAW FILE CONVERTER EX 2.0 or
other software that supports “lossless” RAW compression
(P 212).
87
The Shooting Menus
Option
UNCOMPRESSED
6
FILM SIMULATION
Simulate the effects of different kinds of film, including blackand-white (with or without color filters). Choose a palette according to your subject and creative intent.
Option
6
The Shooting Menus
Description
Standard color reproduction. Suited to a wide range of
c PROVIA/STANDARD subjects, from portraits to landscapes.
A high-contrast palette of saturated colors, suited to
d Velvia/VIVID
nature photos.
Enhances the range of hues available for skin tones in
portraits while preserving the bright blues of daylight
e ASTIA/SOFT
skies. Recommended for outdoor portrait photography.
Soft color and enhanced shadow contrast for a calm
i CLASSIC CHROME
look.
Offers slightly more contrast than h PRO Neg. Std.
g PRO Neg. Hi
Recommended for outdoor portrait photography.
A soft-toned palette. The range of hues available for skin
tones is enhanced, making this a good choice for studio
h PRO Neg. Std
portrait photography.
Take black-and-white photos with rich gradation and
a ACROS *
outstanding sharpness.
Take pictures in standard black and white.
b MONOCHROME *
Take pictures in sepia.
f SEPIA
* Available with yellow (Ye), red (R), and green (G) filters, which deepen shades of
gray corresponding to hues complementary to the selected color. The yellow (Ye)
filter deepens purples and blues and the red (R) filter blues and greens. The green
(G) filter deepens reds and browns, including skin tones, making it a good choice
for portraits.
N Film simulation options can be combined with tone and sharpness
settings.
Film simulation settings can also be accessed via shortcuts (P 176).
For more information, visit: http://fujifilm-x.com/en/x-stories/the-world-offilm-simulation-episode-1/
88
IMAGE QUALITY SETTING
GRAIN EFFECT
Add a film grain effect. Select an amount (STRONG or WEAK) or
choose OFF to turn film grain off.
Options
WEAK
STRONG
OFF
COLOR CHROME EFFECT
Deepen colors in shadows. Select an amount (STRONG or WEAK)
or choose OFF to turn the effect off.
Options
WEAK
STRONG
OFF
O COLOR CHROME EFFECT is not available during bracketing or burst
photography.
Options
AUTO
V 100%
W 200%
X 400%
N If
AUTO is selected, the camera will automatically choose either
V 100% or W 200% according to the subject and shooting conditions. Shutter speed and aperture will be displayed when the shutter
button is pressed halfway.
W 200% is available at sensitivities of ISO 200 and above, X 400%
at sensitivities of ISO 400 and above.
89
6
The Shooting Menus
DYNAMIC RANGE
Control contrast. Choose lower values to increase contrast
when shooting indoors or under overcast skies, higher values
to reduce loss of detail in highlights and shadows when photographing high-contrast scenes. Higher values are recommended
for scenes that include both sunlight and deep shade, for such
high-contrast subjects as sunlight on water, brightly-lit autumn
leaves, and portraits taken against a blue sky, and for white objects or people wearing white; note, however, that mottling may
appear in pictures taken at higher values.
WHITE BALANCE
For natural colors, choose a white balance option that matches
the light source.
Option
AUTO
k/l/m
k
i
j
k
l
m
n
g
Description
White balance is adjusted automatically.
Measure a value for white balance.
Choose a color temperature.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
Reduces the blue cast typically associated with underwater lighting.
N Results vary with shooting conditions. Play pictures back after shooting to check colors.
White balance is adjusted for flash lighting only in AUTO and g modes.
Turn the flash off using other white balance options.
6
The Shooting Menus
White balance options can also be accessed via shortcuts (P 176).
90
IMAGE QUALITY SETTING
Fine-Tuning White Balance
Pressing MENU/OK after selecting a white
balance option displays the dialog shown
at right; use the selector to fine-tune white
balance or press DISP/BACK to exit without
fine-tuning.
WB SHIFT
AUTO
R:0 B:0
SET
Custom White Balance
Choose k, l, or m to adjust white
CUSTOM WB
balance for unusual lighting conditions.
White balance measurement options will
be displayed; frame a white object so that
it fills the display and press the shutter
button all the way down to measure white
balance (to select the most recent custom value and exit without
measuring white balance, press DISP/BACK, or press MENU/OK to select the most recent value and display the fine-tuning dialog).
• If “COMPLETED!” is displayed, press MENU/OK to set white balance to
the measured value.
• If “UNDER” is displayed, raise exposure compensation and try again.
• If “OVER” is displayed, lower exposure compensation and try again.
SHUTTER : NEW WB
SHIFT
NOT CHANGE
The Shooting Menus
91
6
k: Color Temperature
Selecting k in the white balance menu
displays a list of color temperatures;
highlight a color temperature and press
MENU/OK to select the highlighted option
and display the fine-tuning dialog.
WHITE BALANCE
COLOR TEMPERATURE
R:0 B:0
SET
SHIFT
10000K
9100K
8300K
7700K
7100K
Color Temperature
Color temperature is an objective measure of the color of a light source,
expressed in Kelvin (K). Light sources with a color temperature close to that
of direct sunlight appear white; light sources with a lower color temperature have a yellow or red cast, while those with a higher color temperature
are tinged with blue. You can match color temperature to the light source,
or choose options that differ sharply from the color of the light source to
make pictures “warmer” or “colder.”
6
The Shooting Menus
92
IMAGE QUALITY SETTING
HIGHLIGHT TONE
Adjust the appearance of highlights. Choose from seven options
between +4 and −2.
+4
+3
+2
Options
+1
0
−1
−2
SHADOW TONE
Adjust the appearance of shadows. Choose from seven options
between +4 and −2.
+4
+3
+2
Options
+1
0
−1
−2
COLOR
Adjust color density. Choose from nine options between +4 and
−4.
+4
+3
+2
+1
Options
0
−1
−2
−3
−4
6
+4
+3
+2
+1
Options
0
−1
−2
−3
−4
93
The Shooting Menus
SHARPNESS
Sharpen or soften outlines. Choose from nine options between
+4 and −4.
NOISE REDUCTION
Reduce noise in pictures taken at high sensitivities. Choose from
nine options between +4 and −4.
+4
+3
+2
+1
Options
0
−1
−2
−3
−4
LONG EXPOSURE NR
Select ON to reduce mottling in long time-exposures.
Options
ON
OFF
LENS MODULATION OPTIMIZER
Select ON to improve definition by adjusting for diffraction and
the slight loss of focus at the periphery of the lens.
Options
ON
6
OFF
The Shooting Menus
COLOR SPACE
Choose the gamut of colors available for color reproduction.
Option
sRGB
Adobe RGB
94
Description
Recommended in most situations.
For commercial printing.
IMAGE QUALITY SETTING
PIXEL MAPPING
Use this option if you notice bright spots in your pictures.
1
Press MENU/OK in the shooting display and select the H IMAGE QUALITY SETTING tab.
2
Highlight PIXEL MAPPING and press MENU/OK to perform pixel mapping. Processing may take a few seconds.
O Results are not guaranteed.
Be sure the battery is fully charged before beginning pixel mapping.
Pixel mapping is not available when the camera temperature is elevated.
SELECT CUSTOM SETTING
Recall settings saved with EDIT/SAVE CUSTOM SETTING. Settings can be recalled from any of the seven custom settings
banks.
Banks
CUSTOM 1
CUSTOM 2
CUSTOM 6
6
CUSTOM 4
CUSTOM 7
The Shooting Menus
CUSTOM 5
CUSTOM 3
95
IMAGE QUALITY SETTING
EDIT/SAVE CUSTOM SETTING
Save up to 7 sets of custom camera settings for commonly-encountered situations. Saved settings can be recalled using H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING.
1
Press MENU/OK in shooting mode to display the shooting
menu. Select the H IMAGE QUALITY SETTING tab, then
highlight EDIT/SAVE CUSTOM SETTING and press MENU/OK.
2
Highlight a custom settings bank and
press MENU/OK to select.
3
Adjust the following as desired:
6
• DYNAMIC RANGE
• FILM SIMULATION
• GRAIN EFFECT
• COLOR CHROME
The Shooting Menus
EFFECT
• WHITE BALANCE
• HIGHLIGHT TONE
4
• SHADOW TONE
• COLOR
• SHARPNESS
• NOISE REDUCTION
Press DISP/BACK. A confirmation dialog will be displayed; highlight OK
and press MENU/OK.
IMAGE QUALITY SETTING
CUSTOM 1
PIXEL MAPPING
CUSTOM 2
SELECT CUSTOM SETTING
CUSTOM 3
EDIT/SAVE CUSTOM SETTING
CUSTOM 4
CUSTOM 5
CUSTOM 6
CUSTOM 7
画質設定
CUSTOM
カスタム
11
1/2
画像サイズ
画像サイズ
SAVE
CURRENT SETTINGS
画質モード
画質モード
DYNAMIC
RANGE
RAW 記録方式
RAWSIMULATION
FILM
記録方式
フィルムシミュレーション
フィルムシミュレーション
GRAIN
EFFECT
グレイン・エフェクト
COLOR
グレイン・エフェクト
CHROME EFFECT
ダイナミックレンジ
ダイナミックレンジ
WHITE
BALANCE
ホワイトバランス
ハイライトトーン
ホワイトバランス
HIGHLIGHT
TONE
ハイライトトーン
SHADOW
TONE
終了
終了
EXIT
SAVE CUSTOM SETTING
CUSTOM 1 SET OK?
OK
CANCEL
N To store current camera settings in the selected bank, highlight SAVE
CURRENT SETTINGS in Step 3 and press MENU/OK. Banks can be renamed using EDIT CUSTOM NAME.
To restore default settings for the current bank, select RESET.
96
G AF/MF SETTING
Adjust focus settings.
To display focus settings, press MENU/OK
in the shooting display and select the G
(AF/MF SETTING) tab.
AF/MF SETTING
FOCUS AREA
AF MODE
STORE AF MODE BY ORIENTATION
RAPID AF
AF POINT DISPLAY
NUMBER OF THE FOCUS POINTS
PRE-AF
FACE/EYE DETECTION SETTING
EXIT
N The options available vary with the shooting mode selected.
FOCUS AREA
Choose the focus area for autofocus, manual focus, and focus
zoom.
AF MODE
Choose the AF mode for focus modes S and C.
Option
97
6
The Shooting Menus
Description
The camera focuses on the subject in the selected focus point. The
number of focus points available can be selected using G AF/
r
SINGLE POINT MF SETTING > NUMBER OF THE FOCUS POINTS. Use for
pin-point focus on a selected subject.
The camera focuses on the subject in the selected focus zone.
y
Focus zones include multiple focus points, making it easier to
ZONE
focus on subjects that are in motion.
In focus mode C, the camera tracks focus on the subject in the
selected focus point while the shutter button is pressed halfway.
In focus mode S, the camera automatically focuses on high-conz
WIDE/TRACKING trast subjects; the areas in focus are shown in the display. The
camera may be unable to focus on small objects or subjects that
are moving rapidly.
STORE AF MODE BY ORIENTATION
Choose whether the focus mode and focus area used when the
camera is in portrait orientation are stored separately from those
used when the camera is in landscape orientation.
Option
Description
OFF
The same settings are used in both orientations.
FOCUS AREA ONLY The focus area for each orientation can be selected separately.
ON
The focus mode and focus area can be selected separately.
RAPID AF
Select ON for faster focus times. Display quality will drop while
the camera focuses.
Options
ON
6
OFF
AF POINT DISPLAYyz
Choose whether individual focus frames are displayed when
ZONE or WIDE/TRACKING is selected for G AF/MF SETTING >
AF MODE.
The Shooting Menus
Options
ON
98
OFF
AF/MF SETTING
NUMBER OF THE FOCUS POINTS
Choose the number of focus points available for focus-point selection in manual focus mode or when SINGLE POINT is selected
for AF MODE.
Option
117 POINTS
(13 × 9)
425 POINTS
(25 × 17)
Description
Choose from 117 focus points arranged in a 13- by 9-point grid.
Choose from 425 focus points arranged in a 25- by 17-point grid.
PRE-AF
If ON is selected, the camera will continue to adjust focus even
when the shutter button is not pressed halfway. Note that this
increases the drain on the battery.
Options
ON
OFF
6
The Shooting Menus
99
FACE/EYE DETECTION SETTING
Intelligent Face Detection sets focus and
exposure for human faces anywhere in
the frame, preventing the camera from
focusing on the background in group
portraits. Choose for shots that emphasize portrait subjects. Faces can be detected with the camera in vertical or horizontal orientation; if a
face is detected, it will be indicated by a green border. If there is
more than one face in the frame, the camera will select the face
closest to the center; other faces are indicated by white borders.
You can also choose whether the camera detects and focuses on
eyes when Intelligent Face Detection is on. Choose from the following options:
Option
FACE ON/EYE OFF
6
The Shooting Menus
Description
Intelligent Face Detection only.
The camera automatically chooses which eye to focus
FACE ON/EYE AUTO
on when a face is detected.
The camera focuses on the right eye of subjects deFACE ON/RIGHT EYE PRIORITY
tected using Intelligent Face Detection.
The camera focuses on the left eye of subjects detectFACE ON/LEFT EYE PRIORITY
ed using Intelligent Face Detection.
FACE OFF/EYE OFF
Intelligent Face Detection and eye priority off.
O In some modes, the camera may set exposure for the frame as a whole
rather than the portrait subject.
If the subject moves as the shutter button is pressed, the face may not
be in the area indicated by the green border when the picture is taken.
N If the camera is unable to detect the subject’s eyes because they are
hidden by hair, glasses, or other objects, the camera will instead focus
on faces.
Face/eye detection options can also be accessed via shortcuts
(P 176).
100
AF/MF SETTING
AF+MF
If ON is selected in focus mode S, focus can be adjusted manually by rotating the focus ring while the shutter button is pressed
halfway. Both standard and focus peaking MF assist options are
supported.
Options
ON
OFF
O Lenses with a focus distance indicator must be set to manual focus
mode (MF) before this option can be used. Selecting MF disables the
focus distance indicator. Set the focus ring to the center of the focus
distance indicator, as the camera may fail to focus if the ring is set to
infinity or the minimum focus distance.
N Focus peaking can be used to check focus. To enable focus peaking,
select FOCUS PEAK HIGHLIGHT for MF ASSIST.
AF + MF Focus Zoom
When ON is selected for G AF/MF SETTING > FOCUS CHECK and SINGLE
POINT selected for AF MODE, focus zoom can be used to zoom in on the
selected focus area. The zoom ratio (2.5×, 4×, 8×, or 16.7×) can be selected
using the rear command dial.
Option
STANDARD
FOCUS PEAK HIGHLIGHT
Description
Focus is displayed normally.
The camera heightens high-contrast outlines. Choose
a color and peaking level.
101
The Shooting Menus
MF ASSIST
Choose how focus is displayed in manual focus mode.
6
FOCUS CHECK
If ON is selected, the display will automatically zoom in on the
selected focus area when the focus ring is rotated in manual focus mode.
Options
ON
OFF
O Pressing the center of the rear command dial cancels focus zoom.
INTERLOCK SPOT AE & FOCUS AREA
Select ON to meter the current focus frame when SINGLE POINT
is selected for AF MODE and SPOT is selected for PHOTOMETRY.
Options
ON
6
OFF
INSTANT AF SETTING
Choose whether the camera focuses using single AF (AF-S) or
continuous AF (AF-C) when the button to which focus lock is
assigned is pressed in manual focus mode.
The Shooting Menus
Options
AF-S
102
AF-C
AF/MF SETTING
DEPTH-OF-FIELD SCALE
Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints
and the like, PIXEL BASIS to help you assess depth of field for
pictures that will be viewed at high resolutions on computers or
other electronic displays.
Options
PIXEL BASIS
FILM FORMAT BASIS
RELEASE/FOCUS PRIORITY
Choose how the camera focuses in focus mode AF-S or AF-C.
Option
RELEASE
FOCUS
Description
Shutter response is prioritized over focus. Pictures can be taken
when the camera is not in focus.
Focus is prioritized over shutter response. Pictures can be only
taken when the camera is in focus.
TOUCH SCREEN MODE
Choose whether touch controls can be used for focus.
AF
AREA
OFF
Description
Tap the display to select a focus point and lock focus. The shutter
can be released by pressing the shutter button all the way down.
Tap the display to move the focus frame to the selected point. The
selected point will be used for focus and focus zoom.
Touch controls off.
N To disable touch controls and hide the touch screen mode indicator,
select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING.
103
The Shooting Menus
Mode
6
A SHOOTING SETTING
Adjust shooting options.
To display shooting options, press
MENU/OK in the shooting display and select the A (SHOOTING SETTING) tab.
SHOOTING SETTING
SELF-TIMER
SAVE SELF-TIMER SETTING
INTERVAL TIMER SHOOTING
AE BKT SETTING
FILM SIMULATION BKT
PHOTOMETRY
SHUTTER TYPE
IS MODE
EXIT
N The options available vary with the shooting mode selected.
SELF-TIMER
Choose a shutter release delay.
Option
6
The Shooting Menus
Description
The shutter is released two seconds after the shutter button is pressed.
R 2 SEC Use to reduce blur caused by the camera moving when the shutter button is pressed. The self-timer lamp blinks as the timer counts down.
The shutter is released ten seconds after the shutter button is pressed.
S 10 SEC Use for photographs in which you wish to appear yourself. The self-timer lamp blinks immediately before the picture is taken.
OFF Self-timer off.
If an option other than OFF is selected, the timer will start when
the shutter button is pressed all the way down. The display shows
the number of seconds remaining until the shutter is released. To
stop the timer before the picture is taken, press DISP/BACK.
O Stand behind the camera when using the shutter button. Standing in
front of the lens can interfere with focus and exposure.
104
SHOOTING SETTING
SAVE SELF-TIMER SETTING
If ON is selected, the chosen self-timer setting will remain in effect after a picture is taken or the camera is turned off.
Options
ON
OFF
INTERVAL TIMER SHOOTING
Configure the camera to take photos automatically at a preset
interval.
1
Highlight INTERVAL TIMER SHOOTING in the A (SHOOTING SETTING)
tab and press MENU/OK.
2
Use the selector to choose the interval and number of shots. Press
MENU/OK to proceed.
INTERVAL/NUMBER OF TIMES
INTERVAL
NUMBER OF TIMES
END
CANCEL
START WAITING TIME
6
LATER
START
3
CANCEL
Use the selector to choose the starting time and then press MENU/OK.
Shooting will start automatically.
CANCEL
105
The Shooting Menus
ESTIMATED START TIME 11 : 00 PM
O Interval timer photography can not be used at a shutter speed of B
(bulb) or with multiple exposure photography. In burst mode, only
one picture will be taken each time the shutter is released.
N Use of a tripod is recommended.
Check the battery level before starting. We recommend using an optional AC-15V AC power adapter.
The display turns off between shots and lights a few seconds before
the next shot is taken. The display can be activated at any time by
pressing the shutter button.
To continue shooting until the memory card is full, set the number of
shots to ∞.
AE BKT SETTING
Adjust exposure bracketing settings.
Option
6
The Shooting Menus
Description
Choose the number of shots in the bracketing sequence
FRAMES/
(FRAMES) and the amount exposure is varied with each shot
STEP SETTING
(STEP).
1 FRAME/
Choose whether the shots in the bracketing sequence are taken
CONTINUOUS
one at a time (1 FRAME) or in a single burst (CONTINUOUS).
SEQUENCE SETTING Choose the order in which the shots are taken.
FILM SIMULATION BKT
Choose the three film simulation types used for film simulation
bracketing (P 88).
Options
c PROVIA/STANDARD
i CLASSIC CHROME
a ACROS *
d Velvia/VIVID
g PRO Neg. Hi
b MONOCHROME *
* Available with yellow (Ye), red (R), and green (G) filters.
106
e ASTIA/SOFT
h PRO Neg. Std
f SEPIA
SHOOTING SETTING
PHOTOMETRY
Choose how the camera meters exposure.
O The selected option will only take effect when G AF/MF SETTING >
FACE/EYE DETECTION SETTING is OFF.
Mode
Description
The camera instantly determines exposure based on an analo
ysis of composition, color, and brightness distribution. RecMULTI
ommended in most situations.
The camera meters the entire frame but assigns the greatest
p
CENTER-WEIGHTED weight to the area at the center.
The camera meters lighting conditions in an area at the center of the frame equivalent to 2% of the total. Recommended
v
SPOT
with backlit subjects and in other cases in which the background is much brighter or darker than the main subject.
Exposure is set to the average for the entire frame. Provides
consistent exposure across multiple shots with the same
w
AVERAGE
lighting, and is particularly effective for landscapes and portraits of subjects dressed in black or white.
6
The Shooting Menus
107
SHUTTER TYPE
Choose the shutter type. Choose the electronic shutter to mute
the shutter sound.
Option
Description
t MECHANICAL SHUTTER Take pictures with the mechanical shutter.
s ELECTRONIC SHUTTER Take pictures with the electronic shutter.
Reduces the lag between the shutter button being
Q E-FRONT CURTAIN
pressed and the start of the exposure. The mechanical
SHUTTER
shutter is used at high shutter speeds (P 244).
t MECHANICAL +
The camera chooses the mechanical or electronic
s ELECTRONIC
shutter according to shooting conditions.
Q E-FRONT CURTAIN + The camera chooses the electronic or electronic front
s ELECTRONIC
curtain shutter according to shooting conditions.
If an option other than t MECHANICAL SHUTTER is selected,
shutter speeds faster than ¼000 s can be chosen by rotating the
shutter speed dial to 4000 and then rotating the rear command
dial.
6
O When the electronic shutter is used, distortion may be visible in shots
The Shooting Menus
of moving subjects and in hand-held shots taken at high shutter
speeds, while banding and fog may occur in shots taken under fluorescent lights or other flickering or erratic illumination. When taking
pictures with the shutter muted, respect your subjects’ image rights
and right to privacy.
N When the electronic shutter is used, the flash is disabled, sensitivity is
restricted to values of ISO 12800–100, and long exposure noise reduction has no effect.
108
SHOOTING SETTING
IS MODE
Reduce blur.
Option
l CONTINUOUS
Description
Image stabilization on.
Image stabilization enabled only when the shutter button
m SHOOTING ONLY
is pressed halfway (focus mode C) or the shutter is released.
Image stabilization off ; x appears in the display. RecOFF
ommended when the camera is on a tripod.
N This option is available only with lenses that support image stabilization.
ISO AUTO SETTING
Choose the base sensitivity, maximum sensitivity, and minimum
shutter speed for the A position on the sensitivity dial. Settings
for AUTO 1, AUTO 2, and AUTO 3 can be stored separately; the
defaults are shown below.
AUTO 1
800
Default
AUTO 2
100
1600
⁄ s
AUTO 3
6
3200
The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the
default value if the shutter speed required for optimal exposure
would be slower than the value selected for MIN. SHUTTER SPEED.
N If the value selected for DEFAULT SENSITIVITY is higher than that se-
lected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to
the value selected for MAX. SENSITIVITY.
The camera may select shutter speeds slower than MIN. SHUTTER
SPEED if pictures would still be underexposed at the value selected
for MAX. SENSITIVITY.
109
The Shooting Menus
Option
DEFAULT SENSITIVITY
MAX. SENSITIVITY
MIN. SHUTTER SPEED
MOUNT ADAPTOR SETTING
Adjust settings for lenses attached via a mount adapter.
Shutter Select
When using lenses with an internal shutter, choose whether to
use the shutter on the camera (BODY) or the lens (LENS).
O This option may have no effect with some lenses.
Saved Settings
Store settings for up to 6 lenses, or choose OFF to disable corrections for focal length, distortion, color shading, and peripheral
illumination.
Choosing a Focal Length
Use the selector to enter the focal length.
LENS 5
INPUT FOCAL LENGTH
6
SET
The Shooting Menus
Distortion Correction
Choose from STRONG, MEDIUM, or
WEAK options to correct BARREL or PINCUSHION distortion.
LENS5 DISTORTION CORRECTION
BARREL STRONG
BARREL MEDIUM
BARREL WEAK
OFF
PINCUSHION WEAK
PINCUSHION MEDIUM
PINCUSHION STRONG
110
CANCEL
SHOOTING SETTING
Color Shading Correction
Color (shading) variations between the
center and edges of the frame can be adjusted separately for each corner.
To use color shading correction, follow the
steps below.
NEXT
SET
1
Rotate the rear command dial to choose a corner. The selected corner is indicated by a triangle.
2
Use the selector to adjust shading until there is no visible difference in color between the selected corner and the center
of the image. Press the selector left or right to adjust colors
on the cyan–red axis. Press the selector up or down to adjust
colors on the blue–yellow axis.
N To determine the amount required, adjust color shading correction
while taking photos of blue sky or a sheet of gray paper.
6
SET
The Shooting Menus
Peripheral Illumination Correction
Choose from values between –5 and
+5. Choosing positive values increases
peripheral illumination, while choosing
negative values reduces peripheral illumination. Positive values are recommended for vintage lenses, negative values to create the effect of images taken
with an antique lens or a pinhole camera.
CANCEL
N To determine the amount required, adjust peripheral illumination correction while taking photos of blue sky or a sheet of gray paper.
111
SHOOTING SETTING
WIRELESS COMMUNICATION
Connect to smartphones running the “FUJIFILM Camera Remote”
app. The smartphone can be used to browse the images on the
camera, download selected images, control the camera remotely, or upload location data to the camera.
N For downloads and other information, visit:
http://fujifilm-dsc.com/wifi/
6
The Shooting Menus
112
F FLASH SETTING
Adjust flash-related settings.
To display flash-related settings, press
MENU/OK in the shooting display and select the F (FLASH SETTING) tab.
N
The options available vary with the shooting mode selected.
画質設定
FLASH
SETTING
画像サイズ
FLASH
FUNCTION SETTING
画質モード
RED
EYE REMOVAL
RAW 記録方式
TTL-LOCK MODE
フィルムシミュレーション
LED
LIGHT SETTING
グレイン・エフェクト
MASTER
SETTING
ダイナミックレンジ
CH
SETTING
ホワイトバランス
ハイライトトーン
終了
EXIT
FLASH FUNCTION SETTING
Choose a flash control mode, flash mode,
or sync mode or adjust the flash level.
The options available vary with the flash.
MODE
SHOE MOUNT FLASH
N See page 197 for more information.
ADJUST
END
RED EYE REMOVAL
Remove red-eye effects caused by the flash.
FLASH + REMOVAL
FLASH
REMOVAL
OFF
Description
A red-eye reduction pre-flash is combined with digital
red-eye removal.
Flash red-eye reduction only.
Digital red-eye removal only.
Flash red-eye reduction and digital red-eye removal off.
N Flash red-eye reduction can be used in TTL flash control mode. Digital
red-eye removal is performed only when a face is detected and is not
available with RAW images.
113
The Shooting Menus
Option
6
TTL-LOCK MODE
Instead of adjusting flash level with each shot, TTL flash control
can be locked for consistent results across a series of photographs.
Option
Description
Flash output is locked at the value metered for the most
LOCK WITH LAST FLASH recent photo. An error message will be displayed if no
previously metered value exists.
LOCK WITH METERING The camera emits a series of pre-flashes and locks flash
FLASH
output at the metered value.
N To use TTL lock, assign TTL-LOCK to a camera control and then use
the control to enable or disable TTL lock (P 182).
Flash compensation can be adjusted while TTL lock is in effect.
LED LIGHT SETTING
Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos.
6
The Shooting Menus
Option
CATCHLIGHT
AF ASSIST
AF ASSIST + CATCHLIGHT
OFF
Role of LED video light in still photography
Catchlight
AF-assist illuminator
AF-assist illuminator and catchlight
None
N This option can also be accessed via the flash settings menu.
114
FLASH SETTING
MASTER SETTING
Choose a flash group (A, B, or C) for the flash mounted on the
camera hot shoe when it functions as a master flash controlling
remote flash units via FUJIFILM wireless optical flash control, or
choose OFF to limit master flash output to a level that does not
affect the final picture.
Options
Gr A
Gr B
Gr C
OFF
N This option can also be accessed via the flash settings menu.
CH SETTING
Choose the channel used for communication between the master flash and remote flash units when using FUJIFILM optical
wireless flash control. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity.
Options
CH1
CH2
CH3
6
CH4
The Shooting Menus
115
B MOVIE SETTING
Adjust movie-recording options.
To display options for movie recording,
press MENU/OK in the shooting display and
select the B (MOVIE SETTING) tab.
画質設定
MOVIE
SETTING
画像サイズ
MOVIE
MODE
画質モード
MOVIE
AF MODE
RAW 記録方式
HDMI OUTPUT INFO DISPLAY
フィルムシミュレーション
HDMI
REC CONTROL
グレイン・エフェクト
MIC
LEVEL ADJUSTMENT
ダイナミックレンジ
ホワイトバランス
ハイライトトーン
終了
EXIT
N
The options available vary with the shooting mode selected.
MOVIE MODE
Choose a frame size and rate for movie recording.
6
The Shooting Menus
Option
i 1080/29.97P
i 1080/25P
i 1080/24P
i 1080/23.98P
h 720/29.97P
h 720/25P
h 720/24P
h 720/23.98P
Frame size
1920 × 1080 (Full HD)
1280 × 720 (HD)
Rate
29.97 fps
25 fps
24 fps
23.98 fps
29.97 fps
25 fps
24 fps
23.98 fps
MOVIE AF MODE
Choose how the camera selects the focus point for movie recording.
Option
MULTI
AREA
116
Description
Automatic focus-point selection.
The camera focuses on the subject in the selected focus area.
MOVIE SETTING
HDMI OUTPUT INFO DISPLAY
If ON is selected, HDMI devices to which the camera is connected
will mirror the information in the camera display.
Options
ON
OFF
HDMI REC CONTROL
Choose whether the camera sends movie start and stop signals
to the HDMI device when the shutter button is pressed to start
and stop movie recording.
Options
ON
OFF
MIC LEVEL ADJUSTMENT
Adjust the recording level for the built-in
and external microphones.
MIC LEVEL ADJUSTMENT
6
Option
20—1
OFF
CANCEL
Description
Choose a recording level.
Disable the microphone.
N Displays shows the peak recording level detected in a given period.
You can assign MIC LEVEL ADJUSTMENT to a camera control and
then using the control to adjust the microphone level during recording.
117
The Shooting Menus
SET
MEMO
118
Playback and the Playback
Menu
119
The Playback Display
This section lists the indicators that may be displayed
during playback.
O For illustrative purposes, displays are shown with all indicators lit.
1.1. 2017 12:00 AM
Playback and the Playback Menu
7
A Date and time.........................................37, 147
B Face detection indicator .............................100
C Red-eye removal indicator................113, 135
D Location data........................................173, 210
E Protected image ............................................133
F Card slot...........................................................126
G Frame number ...............................................169
H Gift image ......................................................... 43
I Photobook assist indicator ........................139
J DPOF print indicator ....................................141
K Battery level ...................................................... 36
120
L Image size/quality ................................... 86, 87
M Film simulation ............................................... 88
N Dynamic range ............................................... 89
O White balance ................................................. 90
P Sensitivity .......................................................... 74
Q Exposure compensation ............................... 77
R Aperture................................................53, 58, 60
S Shutter speed ......................................53, 54, 60
T Playback mode indicator ............................. 43
U Movie icon......................................................... 49
V Rating...............................................................121
The Playback Display
The DISP/BACK Button
The DISP/BACK button controls the display
of indicators during playback.
Standard
Information off
1.1.2017 12:00 AM
Playback and the Playback Menu
1.1.2017 12:00 AM
1.1.2017.12:00 AM
7
FAVORITES
Favorites
Info display
The Info Display
In the info display, you can press the selector up to cycle through a series of
information and histogram displays.
Favorites: Rating Pictures
To rate the current picture, press DISP/BACK and press the selector up and
down to select from zero to five stars.
121
The Playback Display
Viewing Photo Information
The photo information display changes each
time the selector is pressed up.
Basic data
Histogram
1.1.2017 12:00 AM
Playback and the Playback Menu
BACK
1.1.2017.12:00 AM
S.S 1/1200
F 5.6
ISO 41200
+1
BACK
7
Info display 2
Info display 1
Zooming in on the Focus Point
Press the center of the rear command dial to zoom in on the focus point.
Press again to return to full-frame playback.
122
Viewing Pictures
Read this section for information on playback zoom and
multi-frame playback.
Use the rear command dial to go from
full-frame playback to playback zoom or
multi-frame playback.
100-0001
Multi-frame
playback
Nine-frame view
Playback
zoom
DISP/BACK
MENU/OK
Medium zoom
Playback and the Playback Menu
Full-frame playback
7
Hundred- frame view
Maximum zoom
123
Playback Zoom
Rotate the rear command dial right to zoom in on the current
picture, left to zoom out. To exit zoom, press DISP/BACK, MENU/OK,
or the center of the rear command dial.
N The maximum zoom ratio varies with the option selected for H IM-
AGE QUALITY SETTING > IMAGE SIZE. Playback zoom is not available with cropped or resized copies saved at a size of a.
Playback and the Playback Menu
7
Scroll
When the picture is zoomed in, the selector can
be used to view areas of the image not currently
visible in the display.
Navigation window
Multi-Frame Playback
To change the number of images displayed, rotate the rear command dial left when a picture is displayed full frame.
N Use the selector to highlight images and press MENU/OK to view the
highlighted image full frame. In the nine- and hundred-frame displays, press the selector up or down to view more pictures.
124
Viewing Pictures
Playback Touch Controls
When ON is selected for D BUTTON/DIAL SETTING > TOUCH
SCREEN SETTING, touch controls can be used for the following
playback operations.
• Swipe: Swipe a finger across the display
to view other images.
Playback and the Playback Menu
• Pinch-out: Place two fingers on the display and spread them apart to zoom in.
• Pinch-in: Place two fingers on the display
and slide them together to zoom out.
Zooming out when the picture is displayed full frame triggers multi-frame
playback.
7
• Double-tap: Tap the display twice to zoom
in on the selected area.
• Drag:
View other areas of the image
during playback zoom.
125
C The Playback Menu
Adjust playback settings.
The playback menu is displayed when
you press MENU/OK in playback mode.
PLAY BACK MENU
SWITCH SLOT
RAW CONVERSION
ERASE
CROP
RESIZE
PROTECT
IMAGE ROTATE
RED EYE REMOVAL
EXIT
Playback and the Playback Menu
SWITCH SLOT
Choose the card from which images will be played back.
N If two memory cards are inserted, you can press and hold the a button to choose a card for playback.
7
126
The Playback Menu
RAW CONVERSION
RAW pictures store information on camera settings separately from the data captured by the camera image sensor. Using
C PLAY BACK MENU > RAW CONVERSION, you can create JPEG
copies of RAW pictures using different options for the settings
listed on page 128. The original image data are unaffected, allowing a single RAW image to be processed in a multitude of different ways.
With a RAW picture displayed, press MENU/OK to display the
playback menu.
2
Press the selector up or down to highlight C PLAY BACK MENU > RAW
CONVERSION and press MENU/OK to
display settings.
N These options can also be displayed
by pressing the Q button during playback.
3
4
Press the selector up or down to
highlight a setting and press the selector right to display options. Press
the selector up or down to highlight
the desired option and press MENU/OK
to select and return to the settings
list. Repeat this step to adjust additional settings.
RAW CONVERSION
REFLECT SHOOTING COND.
FILE TYPE
IMAGE SIZE
IMAGE QUALITY
PUSH/PULL PROCESSING
DYNAMIC RANGE
CREATE
CANCEL
RAW CONVERSION
撮影時条件を反映
100%
増感/減感
200%
ダイナミックレンジ
400%
フィルムシミュレーション
ホワイトバランス
WBシフト
Press the Q button to preview the JPEG copy and press
MENU/OK to save.
127
Playback and the Playback Menu
1
7
The settings that can be adjusted when converting pictures from
RAW to JPEG are:
Setting
Playback and the Playback Menu
7
Description
Create a JPEG copy using the settings in effect at the
REFLECT SHOOTING COND.
time the photo was taken.
FILE TYPE
Choose a file format.
IMAGE SIZE
Choose an image size.
IMAGE QUALITY
Adjust image quality.
PUSH/PULL PROCESSING
Adjust exposure.
DYNAMIC RANGE
Enhance details in highlights for natural contrast.
FILM SIMULATION
Simulate the effects of different types of film.
GRAIN EFFECT
Add a film grain effect.
COLOR CHROME EFFECT
Deepen colors in shadows.
WHITE BALANCE
Adjust white balance.
WB SHIFT
Fine-tune white balance.
HIGHLIGHT TONE
Adjust highlights.
SHADOW TONE
Adjust shadows.
COLOR
Adjust color density.
SHARPNESS
Sharpen or soften outlines.
NOISE REDUCTION
Process the copy to reduce mottling.
Improve definition by adjusting for diffraction and
LENS MODULATION OPTIMIZER
the slight loss of focus at the periphery of the lens.
COLOR SPACE
Choose the color space used for color reproduction.
128
The Playback Menu
ERASE
Delete individual pictures, multiple selected pictures, or all pictures.
O Deleted pictures can not be recovered.
Protect important pictures or
copy them to a computer or other storage device before proceeding.
Option
FRAME
SELECTED FRAMES
ALL FRAMES
Description
Delete pictures one at a time.
Delete multiple selected pictures.
Delete all unprotected pictures.
2
Press the selector left or right to scroll through pictures and
press MENU/OK to delete (a confirmation dialog is not displayed). Repeat to delete additional pictures.
SELECTED FRAMES
1 Select SELECTED FRAMES for ERASE in the playback menu.
2
Highlight pictures and press MENU/OK to select or deselect
(pictures in photobooks or printer orders are shown by S).
Selected pictures are indicated by check marks (R).
3
When the operation is complete, press DISP/BACK to display a
confirmation dialog.
4
Highlight OK and press MENU/OK to delete the selected pictures.
129
Playback and the Playback Menu
FRAME
1 Select FRAME for ERASE in the playback menu.
7
ALL FRAMES
1 Select ALL FRAMES for ERASE in the playback menu.
2
A confirmation dialog will be displayed; highlight OK and
press MENU/OK to delete all unprotected pictures.
N Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed can not be recovered.
If a message appears stating that the selected images are part of a
DPOF print order, press MENU/OK to delete the pictures.
Playback and the Playback Menu
7
130
The Playback Menu
CROP
Create a cropped copy of the current picture.
1
2
3
Display the desired picture.
4
5
Press MENU/OK to display a confirmation dialog.
Select CROP in the playback menu.
Use the rear command dial to zoom in and out and press the
selector up, down, left, or right to scroll the picture until the
desired portion is displayed.
N Larger crops produce larger copies; all copies have an aspect ratio of
3∶2. If the size of the final copy will be a, YES will be displayed in
yellow.
Playback and the Playback Menu
Press MENU/OK again to save the cropped copy to a separate
file.
7
131
RESIZE
Create a small copy of the current picture.
1
2
3
Display the desired picture.
4
Press MENU/OK again to save the resized copy to a separate
file.
Select RESIZE in the playback menu.
Highlight a size and press MENU/OK to display a confirmation
dialog.
Playback and the Playback Menu
N The sizes available vary with the size of the original image.
7
132
The Playback Menu
PROTECT
Protect pictures from accidental deletion. Highlight one of the
following options and press MENU/OK.
• FRAME: Protect selected pictures. Press the selector left or right
to view pictures and press MENU/OK to select or deselect. Press
DISP/BACK when the operation is complete.
• SET ALL: Protect all pictures.
• RESET ALL: Remove protection from all pictures.
O Protected pictures will be deleted when the memory card is formatted.
Playback and the Playback Menu
7
133
IMAGE ROTATE
Rotate pictures.
Playback and the Playback Menu
1
2
3
Display the desired picture.
4
Press MENU/OK. The picture will automatically be displayed in
the selected orientation whenever it is played back on the
camera.
Select IMAGE ROTATE in the playback menu.
Press the selector down to rotate the picture 90° clockwise,
up to rotate it 90° counterclockwise.
N Protected pictures can not be rotated. Remove protection before rotating pictures.
The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated when viewed
on a computer or on other cameras.
Pictures taken with D SCREEN SETTING > AUTOROTATE PB are automatically displayed in the correct orientation during playback.
7
134
The Playback Menu
RED EYE REMOVAL
Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create
a copy with reduced red-eye.
1
2
3
Display the desired picture.
Select RED EYE REMOVAL in the playback menu.
Press MENU/OK.
N Results vary depending on the scene and the camera’s success in deThe amount of time needed to process the image varies with the
number of faces detected.
Red eye removal can not be performed on RAW images.
Playback and the Playback Menu
tecting faces. Red eye can not be removed from pictures that have
already been processed using red-eye removal, which are indicated by
a e icon during playback.
7
135
VOICE MEMO SETTING
Add a voice memo to the current photograph.
1
2
3
Select ON for VOICE MEMO SETTING in the playback menu.
Display a photo to which you wish to add a voice memo.
Press and hold the center of the front command dial to record the memo. Recording ends after 30 s or when you release the dial.
N The new memo will be recorded over any existing memos. Deleting
Playback and the Playback Menu
the picture also deletes the memo.
Voice memos can not be added to movies or protected pictures.
Playing Voice Memos
Pictures with voice memos are indicated by q icons during playback. To
play a memo, select the picture and press the center of the front command
dial; a progress bar will be displayed while the memo plays back. Volume
can be adjusted by pressing MENU/OK to pause playback and then pressing
the selector up or down to adjust the volume. Press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SETTING >
PLAYBACK VOLUME.
7
136
The Playback Menu
COPY
Copy pictures between the cards in the first and second slots.
1
2
Select COPY in the playback menu.
3
Highlight one of the following options and press MENU/OK:
• FRAME: Copy selected pictures. Press the selector left or right
to view pictures and press MENU/OK to copy the current picture.
• ALL FRAMES: Copy all pictures.
Highlight one of the following options and press the selector
right:
• SLOT1 y SLOT2: Copy pictures from the card in the first slot to
the card in the second slot.
• SLOT2 y SLOT1: Copy pictures from the card in the second
slot to the card in the first slot.
Playback and the Playback Menu
O Copying ends when the destination is full.
7
137
WIRELESS COMMUNICATION
Connect to smartphones running the “FUJIFILM Camera Remote”
app. The smartphone can be used to browse the images on the
camera, download selected images, control the camera remotely, or upload location data to the camera.
N For downloads and other information, visit:
http://fujifilm-dsc.com/wifi/
Playback and the Playback Menu
7
138
The Playback Menu
PHOTOBOOK ASSIST
Create books from your favorite photos.
Creating a Photobook
1 Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK
ASSIST.
2
Scroll through the images and press the selector up to select
or deselect. Press MENU/OK to exit when the book is complete.
N Neither photographs a or smaller nor movies can be selected
The first picture selected becomes the cover image. Press the
selector down to select the current image for the cover instead.
3
Highlight COMPLETE PHOTOBOOK and press MENU/OK (to select all photos for the book, choose SELECT ALL). The new
book will be added to the list in the photobook assist menu.
N Books can contain up to 300 pictures. Books that contain no photos
are automatically deleted.
Photobooks
Photobooks can be copied to a computer using MyFinePix Studio software.
139
Playback and the Playback Menu
for photobooks.
7
Viewing Photobooks
Highlight a book in the photobook assist menu and press MENU/OK
to display the book, then press the selector left or right to scroll
through the pictures.
Playback and the Playback Menu
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options
will be displayed; select the desired option and follow the onscreen instructions.
• EDIT: Edit the book as described in “Creating a Photobook”.
• ERASE: Delete the book.
7
140
The Playback Menu
PRINT ORDER (DPOF)
Create a digital “print order” for DPOF-compatible printers.
1
2
Select C PLAY BACK MENU > PRINT ORDER (DPOF).
Select WITH DATE s to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before
proceeding.
Display a picture you wish to include in or remove from the
print order.
4
Press the selector up or down to
choose the number of copies (up to
99). To remove a picture from the order, press the selector down until the
number of copies is 0.
PRINT ORDER (DPOF)
DPOF: 00001
01 SHEETS
FRAME
SET
Total number
of prints
Number of copies
5
6
Playback and the Playback Menu
3
7
Repeat steps 3–4 to complete the print order.
The total number of prints is displayed in the monitor. Press
MENU/OK to exit.
N The pictures in the current print order are indicated by a u icon
during playback.
Print orders can contain a maximum of 999 pictures.
If a memory card is inserted containing a print order created by another camera, a message will be displayed. Pressing MENU/OK cancels
the print order; a new print order must be created as described above.
141
instax PRINTER PRINT
To print pictures to optional FUJIFILM instax SHARE printers, first
select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID)
and password, then follow the steps below.
1
2
Turn the printer on.
Select C PLAY BACK MENU > instax
PRINTER PRINT. The camera will connect to the printer.
PRINTER PRINT
instax-12345678
CONNECTING TO PRINTER
Playback and the Playback Menu
FUJIFILM-CAMERA-1234
CANCEL
N To print a frame from a burst sequence, display the frame before
selecting instax PRINTER PRINT.
3
Use the selector to display the picture you want to print, then press
MENU/OK. The picture will be sent to
the printer and printing will start.
PRINTER PRINT
100-0020
TRANSMIT
instax-12345678
7
CANCEL
N Pictures taken with other cameras can not be printed.
The area printed is smaller than the area visible in the LCD monitor.
142
The Playback Menu
DISP ASPECT
Choose how High Definition (HD) devices display pictures with
an aspect ratio of 4∶3 (this option takes effect only when an
HDMI cable is connected). Select 16∶9 to display the image so
that it fills the screen with its top and bottom cropped out, 4∶3 to
display the entire image with black bands at either side.
16:9
4: 3
Option
Playback and the Playback Menu
16∶∶9
16
4∶3
Display
N Select 16∶9 when viewing pictures with an aspect ratio of 16∶9.
7
143
MEMO
144
The Setup Menus
145
D USER SETTING
Adjust basic camera settings.
To access basic camera settings, press
MENU/OK, select the D (SET UP) tab, and
choose USER SETTING.
USER SETTING
FORMAT
DATE/TIME
TIME DIFFERENCE
MY MENU SETTING
SENSOR CLEANING
BATTERY AGE
RESET
FORMAT
To format a memory card:
The Setup Menus
8
1
2
Select D USER SETTING > FORMAT in the D (SET UP) tab.
3
A confirmation dialog will be displayed. To format the memory card,
highlight OK and press MENU/OK. To
exit without formatting the memory
card, select CANCEL or press DISP/BACK.
Highlight the slot containing the card you wish to format and
press MENU/OK.
FORMAT
FORMAT CARD IN SLOT 1, OK?
ERASE ALL DATA
OK
CANCEL
O All data—including protected pictures—will be deleted from the
memory card. Be sure important files have been copied to a computer
or other storage device.
Do not open the battery-chamber cover during formatting.
N The format menu can also be displayed by pressing the center of the
rear command dial while pressing and holding the b button.
146
USER SETTING
DATE/TIME
To set the camera clock:
1
2
Select D USER SETTING > DATE/TIME in the D (SET UP) tab.
3
Press MENU/OK to set the clock.
Press the selector left or right to highlight the year, month,
day, hour, or minute and press up or down to change. To
change the order in which the year, month, and day are displayed, highlight the date format and press the selector up
or down.
TIME DIFFERENCE
Switch the camera clock instantly from your home time zone to
the local time at your destination when traveling. To specify the
difference between your local and home time zone:
Highlight g LOCAL and press MENU/OK.
Use the selector to choose the time difference between local
time and your home time zone. Press MENU/OK when settings
are complete.
To set the camera clock to local time, highlight g LOCAL and
press MENU/OK. To set the clock to the time in your home time zone,
select h HOME. If g LOCAL is selected, g will be displayed in
yellow for about three seconds when the camera is turned on.
Options
g LOCAL
h HOME
147
The Setup Menus
1
2
8
a
Choose a language.
MY MENU SETTING
Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used options.
1
2
Highlight D USER SETTING > MY
MENU SETTING in the D (SET UP)
tab and press MENU/OK to display the
options at right.
マイメニュー設定
The Setup Menus
Press the selector up or down to
highlight MY MENU SETTING and
press MENU/OK. Options that can be
added to “my menu” are highlighted
in blue.
MY MENU SETTING
マイメニュー登録
順序変更
削除
MY MENU SETTING
RANK ITEMS
REMOVE ITEMS
MY MENU SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
GRAIN EFFECT
COLOR CHROME EFFECT
DYNAMIC RANGE
WHITE BALANCE
OK
N
3
SELECT
CANCEL
Items currently in “my menu” are indicated by check marks.
Highlight an item and press MENU/OK
to add it to “my menu”.
MYマイメニュー設定
MENU SETTING
1 画像サイズ
1 IMAGE
SIZE
8
移動
MOVE
4
5
決定
OK
SAVE
Press MENU/OK to return to the edit display.
Repeat Steps 3 and 4 until all the desired items have been added.
N “My menu” can contain up to 16 items.
Editing “My Menu”
To reorder or delete items, select RANK ITEMS or REMOVE ITEMS in Step 1.
148
USER SETTING
SENSOR CLEANING
Remove dust from the camera image sensor.
• OK: Clean the sensor immediately.
• WHEN SWITCHED ON: Sensor cleaning will be performed when the
camera is turned on.
• WHEN SWITCHED OFF: Sensor cleaning will be performed when the
camera turns off (sensor cleaning is not however performed if
the camera turns off in playback mode).
N Dust that can not be removed using sensor cleaning can be removed
manually.
BATTERY AGE
Check the age (expressed as a number between 0 and 4) of the
batteries in the camera and the vertical power-booster grip.
The Setup Menus
8
149
USER SETTING
RESET
Reset shooting or setup menu options to default values. Custom
white balance, custom settings banks created using EDIT/SAVE
CUSTOM SETTING, WIRELESS SETTINGS, and the setup menu
DATE/TIME and TIME DIFFERENCE options are not affected.
1
2
Highlight the desired option and press the selector right.
A confirmation dialog will be displayed; highlight OK and
press MENU/OK.
The Setup Menus
8
150
D SOUND SETTING
Make changes to camera sounds.
To access sound settings, press MENU/OK,
select the D (SET UP) tab, and choose
SOUND SETTING.
SOUND SETTING
AF BEEP VOL.
SELF-TIMER BEEP VOL.
OPERATION VOL.
HEADPHONES VOLUME
SHUTTER VOLUME
SHUTTER SOUND
PLAYBACK VOLUME
AF BEEP VOL.
Choose the volume of the beep that sounds when the camera
focuses. The beep can be muted by selecting f.
Options
b (high)
c (medium)
d (low)
f (mute)
Options
b (high)
c (medium)
d (low)
f (mute)
OPERATION VOL.
Adjust the volume of the sounds produced when camera controls are operated. Choose f to disable control sounds.
Options
b (high)
c (medium)
d (low)
f (mute)
151
The Setup Menus
SELF-TIMER BEEP VOL.
Choose the volume of the beep that sounds while the self-timer
is active. The beep can be muted by selecting f.
8
SOUND SETTING
HEADPHONES VOLUME
Adjust headphone volume. Choose from values between 0 and 10.
SHUTTER VOLUME
Adjust the volume of the sounds produced by the electronic
shutter. Choose f to disable the shutter sound.
Options
b (high)
c (medium)
d (low)
f (mute)
SHUTTER SOUND
Choose the sound made by the electronic shutter.
i
Options
j
k
PLAYBACK VOLUME
Adjust playback volume. Choose from values between 0 and 10.
The Setup Menus
8
152
D SCREEN SETTING
Make changes to display settings.
To access display settings, press MENU/OK,
select the D (SET UP) tab, and choose
SCREEN SETTING.
SCREEN SETTING
EVF BRIGHTNESS
EVF COLOR
LCD BRIGHTNESS
LCD COLOR
IMAGE DISP.
AUTOROTATE DISPLAYS
PREVIEW EXP./WB IN MANUAL MODE
PREVIEW PIC. EFFECT
EVF BRIGHTNESS
Adjust the brightness of the display in the electronic viewfinder.
Select MANUAL to choose from 11 options from +5 (bright) to
−5 (dark), or select AUTO for automatic brightness adjustment.
Options
MANUAL
AUTO
+5
+4
+3
+2
+1
Options
0
−1
−2
−3
−4
−5
LCD BRIGHTNESS
Adjust monitor brightness.
+5
+4
+3
+2
8
+1
Options
0
−1
−2
−3
−4
−5
+1
Options
0
−1
−2
−3
−4
−5
LCD COLOR
Adjust monitor hue.
+5
+4
+3
+2
The Setup Menus
EVF COLOR
Adjust the hue of the display in the electronic viewfinder.
153
IMAGE DISP.
Choose how long images are displayed after shooting. Colors may
differ slightly from those in the final image and “noise” mottling
may be visible at high sensitivities.
Option
CONTINUOUS
1.5 SEC
0.5 SEC
OFF
Description
Pictures are displayed until the MENU/OK button is pressed or the
shutter button is pressed halfway. To zoom in on the active focus
point, press the center of the rear command dial; press again to
cancel zoom.
Pictures are displayed for the selected time or until the shutter
button is pressed halfway.
Pictures are not displayed after shooting.
AUTOROTATE DISPLAYS
Choose whether the indicators in the viewfinder and LCD monitor
rotate to match camera orientation.
The Setup Menus
Options
ON
8
154
OFF
SCREEN SETTING
PREVIEW EXP./WB IN MANUAL MODE
Select PREVIEW EXP./WB to enable exposure and white balance
preview in manual exposure mode, or choose PREVIEW WB to
preview only white balance (PREVIEW WB is recommended in situations in which exposure and white balance are likely to change
during shooting, as may be the case when you use a flash with an
incandescent monitoring lamp). Select OFF when using a flash
or on other occasions on which exposure may change when the
picture is taken.
PREVIEW EXP./WB
Options
PREVIEW WB
OFF
Options
ON
OFF
N If OFF is selected, the effects of camera settings will not be visible
in the monitor and colors and tone will differ from those in the final
picture. The display will however be adjusted to show the effects of
advanced filters and of monochrome and sepia settings.
155
The Setup Menus
PREVIEW PIC. EFFECT
Choose ON to preview the effects of film simulation, white balance, and other settings in the monitor, OFF to make shadows
in low-contrast, back-lit scenes and other hard-to-see subjects
more visible.
8
FRAMING GUIDELINE
Choose a framing grid for shooting mode.
Option
G GRID 24
F GRID 9
Display
P
For “rule of thirds” composition.
P
H HD FRAMING
P
A six-by-four grid.
Frame HD pictures in the
crop shown by the lines at
the top and bottom of the
display. Framing guides can
be changed as desired for
tethered shooting.
N Framing guides are not shown at default settings but can be displayed
using D SCREEN SETTING > DISP. CUSTOM SETTING (P 158).
The Setup Menus
Tethered shooting is available with Adobe® Photoshop® Lightroom®
and HS-V5 tethered shooting software (available separately). Users of
Adobe® Photoshop® Lightroom® who wish to customize the HD framing guide will require FUJIFILM Tether Shooting Plug-in PRO (available
separately).
8
156
SCREEN SETTING
AUTOROTATE PB
Choose ON to automatically rotate “tall” (portrait-orientation)
pictures during playback.
Options
ON
OFF
FOCUS SCALE UNITS
Choose the units used for the focus distance indicator.
Options
METERS
FEET
The Setup Menus
8
157
DISP. CUSTOM SETTING
Choose the items shown in the standard indicator display.
1
In shooting mode, press DISP/BACK until standard indicators
are displayed.
2
Press MENU/OK and select D SCREEN SETTING > DISP. CUSTOM SETTING in the D (SET UP) tab.
3
Highlight items and press MENU/OK to select or deselect.
The Setup Menus
Item
FRAMING GUIDELINE
ELECTRONIC LEVEL
FOCUS FRAME
AF DISTANCE INDICATOR
MF DISTANCE INDICATOR
HISTOGRAM
LIVE VIEW HIGHLIGHT ALERT
SHOOTING MODE
APERTURE/S-SPEED/ISO
INFORMATION BACKGROUND
Expo. Comp. (Digit)
Expo. Comp. (Scale)
FOCUS MODE
PHOTOMETRY
8
4
5
Default
w
w
R
w
R
w
w
R
R
R
w
R
R
R
Item
SHUTTER TYPE
FLASH
CONTINUOUS MODE
DUAL IS MODE
TOUCH SCREEN MODE
WHITE BALANCE
FILM SIMULATION
DYNAMIC RANGE
FRAMES REMAINING
IMAGE SIZE/QUALITY
MOVIE MODE & REC. TIME
MIC LEVEL ADJUSTMENT
BATTERY LEVEL
FRAMING OUTLINE
Default
R
R
R
R
R
R
R
R
R
R
R
R
R
w
Press DISP/BACK to save changes.
Press DISP/BACK as needed to exit the menus and return to the
shooting display.
158
SCREEN SETTING
SUB MONITOR SETTING
Choose the items shown in the secondary LCD monitor.
1
Press MENU/OK and select D SCREEN SETTING > SUB MONITOR SETTING in the D (SET UP) tab.
2
Select STILL MODE or MOVIE MODE.
3
Highlight items for display in positions A
to H and press MENU/OK to select or deselect. Items not available when MOVIE
MODE is selected are indicated by asterisks (“*”).
• Text (items A to D):
4
Press DISP/BACK to save changes.
The Setup Menus
SHUTTER SPEED, APERTURE, EXPO.
COMP, ISO, MOVIE MODE, FRAMES REM. *, REC. TIME, NONE
• Icons (items E * to H): FILM SIMULATION, WHITE BALANCE,
IMAGE SIZE , SHOOTING MODE, PHOTOMETRY, DRIVE
MODE *, FOCUS MODE, IMAGE QUALITY *, BATTERY LEVEL,
CARD SLOT OPTIONS, SHUTTER TYPE *, DYNAMIC RANGE *,
MOVIE MODE *, NONE
8
159
D BUTTON/DIAL SETTING
Access options for camera controls.
To access control options, press MENU/OK,
select the D (SET UP) tab, and choose
BUTTON/DIAL SETTING.
BUTTON/DIAL SETTING
FOCUS LEVER SETTING
EDIT/SAVE QUICK MENU
FUNCTION (Fn) SETTING
SELECTOR BUTTON SETTING
COMMAND DIAL SETTING
SHUTTER AF
SHUTTER AE
SHOOT WITHOUT LENS
FOCUS LEVER SETTING
Choose the functions performed by the focus stick (focus lever).
Option
LOCK (OFF)
The Setup Menus
Description
The focus stick can not be used during shooting.
Press the stick to view the focus-point display and tilt the stick
PUSH n TO UNLOCK
to select a focus point.
Tilt the stick to view the focus-point display and select a focus
ON
point.
8
160
BUTTON/DIAL SETTING
EDIT/SAVE QUICK MENU
Choose the items displayed in the quick menu.
1
Select D BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU
in the D (SET UP) tab.
2
The current quick menu will be displayed; use the selector
to highlight the item you wish to change and press MENU/OK.
3
Highlight any of the following options and press MENU/OK to
assign it to the selected position.
*
*
*
*
*
*
*
*
*
*
* Stored in custom settings bank.
N
4
• AF-C CUSTOM SETTINGS
• FACE/EYE DETECTION SETTING
• MF ASSIST
• TOUCH SCREEN MODE
• SELF-TIMER
• PHOTOMETRY
• SHUTTER TYPE
• FLASH FUNCTION SETTING
• FLASH COMPENSATION
• MOVIE MODE
• MIC LEVEL ADJUSTMENT
• EVF/LCD BRIGHTNESS
• EVF/LCD COLOR
• NONE
The Setup Menus
• IMAGE SIZE
• IMAGE QUALITY
• FILM SIMULATION
• GRAIN EFFECT
• COLOR CHROME EFFECT
• DYNAMIC RANGE
• WHITE BALANCE
• HIGHLIGHT TONE
• SHADOW TONE
• COLOR
• SHARPNESS
• NOISE REDUCTION
• SELECT CUSTOM SETTING
• AF MODE
8
Select NONE to assign no option to the selected position. When
SELECT CUSTOM SETTING is selected, current settings are
shown in the quick menu by the label BASE.
Highlight the desired item and press MENU/OK to assign it to
the selected position.
N The quick menu can also be accessed in shooting mode by holding
the Q button.
161
FUNCTION (Fn) SETTING
Choose the roles played by the function buttons.
The Setup Menus
8
1
Select D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING in the D (SET UP) tab.
2
3
Highlight the desired control and press MENU/OK.
Highlight any of the following options and press MENU/OK to
assign it to the selected control.
• EXP. COMPENSATION
• IMAGE SIZE
• IMAGE QUALITY
• RAW
• FILM SIMULATION
• GRAIN EFFECT
• COLOR CHROME EFFECT
• DYNAMIC RANGE
• WHITE BALANCE
• SELECT CUSTOM SETTING
• FOCUS AREA
• FOCUS CHECK
• AF MODE
• RAPID AF
• FACE/EYE DETECTION SETTING
• SELF-TIMER
• AE BKT SETTING
• PHOTOMETRY
• SHUTTER TYPE
• ISO AUTO SETTING
• WIRELESS COMMUNICATION
• FLASH FUNCTION SETTING
• TTL-LOCK
• MODELING FLASH
• MIC LEVEL ADJUSTMENT
• PREVIEW DEPTH OF FIELD
• PREVIEW EXP./WB IN MANUAL MODE
• PREVIEW PIC. EFFECT
• HISTOGRAM
• ELECTRONIC LEVEL
• AE LOCK ONLY
• AF LOCK ONLY
• AE/AF LOCK
• AF-ON
• LOCK SETTING
• PLAYBACK
• NONE (control disabled)
N Function button assignment options can also be accessed by holding
the DISP/BACK button. The selector can not be assigned more than one
role at a time.
162
BUTTON/DIAL SETTING
AF-ON
If AF-ON is selected, you can press the control instead of keeping
the shutter button pressed halfway.
MODELING FLASH
If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the
flash and check for shadows and the like (modeling flash).
TTL-LOCK
If TTL-LOCK is selected, you can press the control to lock flash
output according to the option selected for F FLASH SETTING >
TTL-LOCK MODE (P 114).
The Setup Menus
8
163
SELECTOR BUTTON SETTING
Choose the roles played by the up, down, left, and right buttons
on the selector.
Option
Fn BUTTON
FOCUS AREA
Description
The selector buttons serve as function buttons.
The selector buttons can be used to position the focus area.
N Selecting FOCUS AREA prevents you accessing the functions assigned to the function buttons.
COMMAND DIAL SETTING
Choose the roles played by the command dials.
Option
Y F X S.S.
Y S.S. X F
Description
The front command dial controls aperture, the rear command dial shutter speed.
The front command dial controls shutter speed, the rear
command dial aperture.
The Setup Menus
SHUTTER AF
Choose whether the camera focuses when the shutter button is
pressed halfway.
Option
8
ON
OFF
164
Description
In focus mode S (AF-S), the camera focuses when the shutter button
is pressed halfway and locks focus while the button remains in this
position. In focus mode C (AF-C), focus is adjusted continually while the
button is pressed halfway.
The camera does not focus when the shutter button is pressed halfway.
BUTTON/DIAL SETTING
SHUTTER AE
If ON is selected, exposure will lock while the shutter button is
pressed halfway.
Options
ON
OFF
N Select OFF to allow the camera to adjust exposure before each shot
taken in burst mode.
SHOOT WITHOUT LENS
Choose ON to enable the shutter release when no lens is attached.
Options
ON
OFF
Options
X CW (clockwise)
Y CCW (counterclockwise)
AE/AF-LOCK MODE
If AE & AF ON WHEN PRESSING is selected, exposure and/or
focus will lock while you press the button to which exposure or
focus lock is assigned. If AE & AF ON/OFF SWITCH is selected,
exposure and/or focus will lock when the button is pressed and
remain locked until it is pressed again.
Options
AE & AF ON WHEN PRESSING
AE & AF ON/OFF SWITCH
165
The Setup Menus
FOCUS RING
Choose the direction in which the focus ring is rotated to increase the focus distance.
8
BUTTON/DIAL SETTING
EXPO. COMP. BUTTON SETTING
Control the behavior of the rear command dial and the button
to which exposure compensation is assigned. If d ON WHEN
PRESSING is selected, exposure compensation can be adjusted
by holding the button while rotating dial; if d ON/OFF SWITCH
is selected, exposure compensation can be set by pressing the
button once, rotating the dial, and then pressing the button
again.
Options
ON WHEN PRESSING
ON/OFF SWITCH
TOUCH SCREEN SETTING
Enable or disable touch-screen controls.
Options
ON
The Setup Menus
8
OFF
LOCK
Lock selected controls to prevent unintended operation.
Options
LOCK SETTING
FUNCTION
SELECTION
Description
Choose from the following:
• UNLOCK: Reset lock options.
• ALL FUNCTION: Lock all controls in the FUNCTION SELECTION list.
• SELECTED FUNCTION: Lock only the controls selected in
the FUNCTION SELECTION list.
Choose the controls locked when SELECTED FUNCTION is
chosen for LOCK SETTING.
N The selector and the Q button can be locked at any time by pressing
and holding the MENU/OK button (P 5).
166
D POWER MANAGEMENT
Adjust power management settings.
To access power management settings,
press MENU/OK, select the D (SET UP) tab,
and choose POWER MANAGEMENT.
POWER MANAGEMENT
AUTO POWER OFF
SHOOTING STAND BY MODE
AUTO POWER SAVE
AUTO POWER OFF
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase
battery life; if OFF is selected, the camera must be turned off
manually.
Options
5 MIN
2 MIN
1 MIN
30 SEC
15 SEC
OFF
8
Options
5 MIN
2 MIN
1 MIN
The Setup Menus
SHOOTING STAND BY MODE
In standby mode, all displays except the secondary LCD monitor
turn off to save power. Choose how long the camera waits before
entering standby mode when no operations are performed, or
select OFF to disable standby mode.
30 SEC
15 SEC
OFF
167
POWER MANAGEMENT
AUTO POWER SAVE
If ON is selected, the display frame rate will drop to save power if
no operations are performed for a short period, but the normal
frame rate can be restored by operating camera controls.
Options
ON
The Setup Menus
8
168
OFF
D SAVE DATA SETTING
Make changes to file management settings.
To access file management settings,
press MENU/OK, select the D (SET UP) tab,
and choose SAVE DATA SETTING.
SAVE DATA SETTING
FRAME NO.
SAVE ORG IMAGE
EDIT FILE NAME
CARD SLOT SETTING (STILL IMAGE)
SWITCH SLOT (SEQUENTIAL)
MOVIE FILE DESTINATION
COPYRIGHT INFO
Option
CONTINUOUS
RENEW
Description
Numbering continues from the last file number used or the
first available file number, whichever is higher. Choose this
option to reduce the number of pictures with duplicate file
names.
Numbering is reset to 0001 after formatting or when a new
memory card is inserted.
N If the frame number reaches 999-9999, the shutter release will be disabled. Format the memory card after transferring to a computer any
pictures you wish to keep.
Selecting D USER SETTING > RESET sets FRAME NO. to CONTINUOUS but does not reset the file number.
Frame numbers for pictures taken with other cameras may differ.
169
The Setup Menus
FRAME NO.
Frame number
New pictures are stored in image files named
using a four-digit file number assigned by
adding one to the last file number used. The
File
file number is displayed during playback as Directory
number
number
shown. FRAME NO. controls whether file numbering is reset to 0001 when a new memory card is inserted or
the current memory card is formatted.
8
SAVE ORG IMAGE
Choose ON to save unprocessed copies of pictures taken using
RED EYE REMOVAL.
Options
ON
OFF
EDIT FILE NAME
Change the file name prefix. sRGB images use a four-letter prefix
(default “DSCF”), Adobe RGB images a three-letter prefix (“DSF”)
preceded by an underscore.
Option
sRGB
Adobe RGB
Default prefix
DSCF
_DSF
Sample file name
ABCD0001
_ABC0001
N File name prefixes can be edited using touch controls.
The Setup Menus
CARD SLOT SETTING (STILL IMAGE)
Choose the role played by the card in the second slot.
Option
SEQUENTIAL
BACKUP
8
RAW/JPEG
Description
The card in the second slot is used only when the card in the
first slot is full.
Each picture is recorded twice, once to each card.
As for SEQUENTIAL, except that the RAW copy of pictures
taken with FINE + RAW or NORMAL + RAW selected for
H IMAGE QUALITY SETTING > IMAGE QUALITY will
be saved to the card in the first slot and the JPEG copy to the
card in the second slot.
SWITCH SLOT (SEQUENTIAL)
Choose the card that is recorded to first when SEQUENTIAL is
selected for CARD SLOT SETTING (STILL IMAGE).
Options
SLOT 1
170
SLOT 2
SAVE DATA SETTING
MOVIE FILE DESTINATION
Choose the slot used to store movies.
Options
SLOT 1
SLOT 2
COPYRIGHT INFO
Copyright information, in the form of Exif tags, can be added to
new images as they are taken. Changes to copyright information
are reflected only in images taken after the changes are made.
Option
Description
DISP COPYRIGHT INFO View the current copyright information.
ENTER AUTHOR’S INFO Enter the creator’s name.
ENTER COPYRIGHT INFO Enter the name of the copyright holder.
Delete the current copyright information. This change applies
DELETE COPYRIGHT INFO only to images taken after this option is selected; copyright
information recorded with existing images is not affected.
The Setup Menus
N Copyright information can be edited using touch controls.
8
171
D CONNECTION SETTING
Adjust settings for connection to other devices.
To access connection settings, press
MENU/OK, select the D (SET UP) tab, and
choose CONNECTION SETTING.
CONNECTION SETTING
WIRELESS SETTINGS
PC CONNECTION SETTING
GEOTAGGING SET-UP
instax PRINTER CONNECTION SETTING
PC SHOOT MODE
WIRELESS SETTINGS
Adjust settings for connection to wireless networks.
Option
The Setup Menus
Description
Choose a name (NAME) to identify the camera on the
wireless network (the camera is assigned a unique name by
GENERAL SETTINGS
default) or select RESET WIRELESS SETTINGS to restore
default settings.
Choose ON (the default setting, recommended in most
circumstances) to resize larger images to H for upload to
RESIZE IMAGE FOR
smartphones, OFF to upload images at their original size.
SMARTPHONE H
Resizing applies only to the copy uploaded to the smartphone; the original is not affected.
8
172
CONNECTION SETTING
PC CONNECTION SETTING
Choose the method used for connection to computers. Choose
SIMPLE SETUP to connect using WPS, MANUAL SETUP to configure network settings manually.
Options
SIMPLE SETUP
MANUAL SETUP
N For more information on wireless connections, visit:
http://fujifilm-dsc.com/wifi/
GEOTAGGING SET-UP
View location data downloaded from a smartphone and choose
whether to save the data with your pictures.
Option
GEOTAGGING
N For more information on wireless connections, visit:
http://fujifilm-dsc.com/wifi/
instax PRINTER CONNECTION SETTING
Adjust settings for connection to optional FUJIFILM instax SHARE
printers.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the
bottom of the printer; the default password is
“1111”. If you have already chosen a different
password to print from a smartphone, enter
that password instead.
173
The Setup Menus
LOCATION INFO
Description
Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.
Display the location data last downloaded from a smartphone.
8
CONNECTION SETTING
PC SHOOT MODE
Adjust settings for remote photography (tethered shooting).
Option
OFF
USB AUTO
USB FIXED
Description
Choose this option if you do not intend to use tethered
shooting.
Tethered shooting mode is selected automatically when the
camera is connected to a computer via USB. When no computer is connected, the results are the same as OFF.
The camera functions in tethered shooting mode even when
not connected to a computer. At default settings, pictures are
not saved to the memory card, but pictures taken while the
camera is not connected will be transferred to the computer
when it is connected.
O D POWER MANAGEMENT > AUTO POWER OFF also apply during
tethered shooting. Select OFF to prevent the camera turning off automatically.
The Setup Menus
N Tethered shooting is available with software such as HS-V5 (available
separately) or FUJIFILM X Acquire (available for free download from
the FUJIFILM website) or when the FUJIFILM Tether Shooting Plug-in
PRO or Tether Shooting Plug-in (both available separately) is used with
Adobe® Photoshop® Lightroom®.
8
174
Shortcuts
175
Shortcut Options
Customize camera controls to suit your style or situation.
Frequently-used options can be added to the Q menu or a custom “my” menu or assigned to an Fn (function) button for direct
access:
• The Q menu (P 177): The Q menu is displayed by pressing the Q
button. Use the Q menu to view or change the options selected
for frequently-used menu items.
• “My menu” (P 184): Add frequently-used options to this custom menu, which can be viewed by pressing MENU/OK and selecting the E (“MY MENU”) tab.
• The function buttons (P 180): Use the function buttons for direct access to selected features.
Shortcuts
9
176
The Q (Quick Menu) Button
Press Q for quick access to selected options.
The Quick Menu Display
At default settings, the quick menu contains the following items:
SELECT CUSTOM SETTING
BASE
SET
I HIGHLIGHT TONE
J SHADOW TONE
K COLOR
L SHARPNESS
M SELF-TIMER
N FACE/EYE DETECTION SETTING
O FLASH FUNCTION SETTING
P EVF/LCD BRIGHTNESS
The quick menu shows the options currently selected for items
B–P, which can be changed as described on page 179.
SELECT CUSTOM SETTING
The H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING item (item
A) shows the current custom settings bank:
• q: No custom settings bank selected.
• t–u: Select a bank to view the settings saved using the H IMAGE
QUALITY SETTING > EDIT/SAVE CUSTOM SETTING option.
• r–s: The current custom settings bank.
177
Shortcuts
A SELECT CUSTOM SETTING
B AF MODE
C DYNAMIC RANGE
D WHITE BALANCE
E NOISE REDUCTION
F IMAGE SIZE
G IMAGE QUALITY
H FILM SIMULATION
9
Viewing and Changing Settings
1 Press Q to display the quick menu
during shooting.
2
Use the selector to highlight items
and rotate the rear command dial to
change.
SELECT CUSTOM SETTING
BASE
N Changes
are not saved to the current settings bank. Settings that differ from those in the current settings
bank (t–u) are shown in red.
3
SET
Press Q to exit when settings are complete.
Shortcuts
N The quick menu can also be edited using touch controls.
9
178
The Q (Quick Menu) Button
Editing the Quick Menu
To choose the items displayed in the quick menu:
1
Press and hold the Q button during
shooting.
2
The current quick menu will be displayed; use the selector
to highlight the item you wish to change and press MENU/OK.
3
Highlight any of the following options and press MENU/OK to
assign it to the selected position.
*
*
*
*
*
*
*
*
*
*
* Stored in custom settings bank.
• AF-C CUSTOM SETTINGS
• FACE/EYE DETECTION SETTING
• MF ASSIST
• TOUCH SCREEN MODE
• SELF-TIMER
• PHOTOMETRY
• SHUTTER TYPE
• FLASH FUNCTION SETTING
• FLASH COMPENSATION
• MOVIE MODE
• MIC LEVEL ADJUSTMENT
• EVF/LCD BRIGHTNESS
• EVF/LCD COLOR
• NONE
N Select NONE to assign no option to the selected position. When
SELECT CUSTOM SETTING is selected, current settings are
shown in the quick menu by the label BASE.
N The quick menu can also be edited using D BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU.
179
Shortcuts
• IMAGE SIZE
• IMAGE QUALITY
• FILM SIMULATION
• GRAIN EFFECT
• COLOR CHROME EFFECT
• DYNAMIC RANGE
• WHITE BALANCE
• HIGHLIGHT TONE
• SHADOW TONE
• COLOR
• SHARPNESS
• NOISE REDUCTION
• SELECT CUSTOM SETTING
• AF MODE
9
The Fn (Function) Buttons
Assign roles to the function buttons and the center of the
rear command dial for quick access to selected features.
The default assignments are:
Shortcuts
Fn1 button
Fn2 button
Exposure compensation
Exposure bracketing
Fn3 button
Fn4 button
Histogram
Focus lock
Fn5 button
Fn6 button
Exposure lock
AF mode
9
180
The Fn (Function) Buttons
Fn7 button
Fn8 button
Film simulation
White balance
Fn9 button
Center of rear command dial
Rapid AF
Focus check
Shortcuts
9
181
Assigning Roles to the Function Buttons
To assign roles to the buttons:
Shortcuts
9
1
Press and hold the DISP/BACK button
until a button selection menu is displayed.
2
3
Highlight a button and press MENU/OK.
Highlight the desired role and press MENU/OK to assign it to
the selected button. Choose from:
• EXP. COMPENSATION
• IMAGE SIZE
• IMAGE QUALITY
• RAW
• FILM SIMULATION
• GRAIN EFFECT
• COLOR CHROME EFFECT
• DYNAMIC RANGE
• WHITE BALANCE
• SELECT CUSTOM SETTING
• FOCUS AREA
• FOCUS CHECK
• AF MODE
• RAPID AF
• FACE/EYE DETECTION SETTING
• SELF-TIMER
• AE BKT SETTING
• PHOTOMETRY
• SHUTTER TYPE
• ISO AUTO SETTING
• WIRELESS COMMUNICATION
• FLASH FUNCTION SETTING
• TTL-LOCK
• MODELING FLASH
• MIC LEVEL ADJUSTMENT
• PREVIEW DEPTH OF FIELD
• PREVIEW EXP./WB IN MANUAL MODE
• PREVIEW PIC. EFFECT
• HISTOGRAM
• ELECTRONIC LEVEL
• AE LOCK ONLY
• AF LOCK ONLY
• AE/AF LOCK
• AF-ON
• LOCK SETTING
• PLAYBACK
• NONE (control disabled)
N Button assignments can also be selected using D BUTTON/DIAL
SETTING > FUNCTION (Fn) SETTING. The selector can not be assigned more than one role at a time.
182
The Fn (Function) Buttons
AF-ON
If AF-ON is selected, you can press the control instead of keeping
the shutter button pressed halfway.
MODELING FLASH
If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the
flash and check for shadows and the like (modeling flash).
TTL-LOCK
If TTL-LOCK is selected, you can press the control to lock flash
output according to the option selected for F FLASH SETTING >
TTL-LOCK MODE (P 114).
Shortcuts
9
183
E MY MENU
Access a personalized menu of frequently-used options.
To display “my menu”, press MENU/OK in the
shooting display and select the E (MY
MENU) tab.
MY MENU
SELF-TIMER
INTERVAL TIMER SHOOTING
FILM SIMULATION
GRAIN EFFECT
OFF
ON
OFF
OFF
FACE/EYE DETECTION SETTING
STD
ISO AUTO SETTING
SHUTTER TYPE
IS MODE
EXIT
N The
E tab is only available if options have been assigned to
MY MENU.
Shortcuts
9
184
MY MENU
MY MENU SETTING
To choose the items listed in the E (MY MENU) tab:
1
2
Highlight D USER SETTING > MY
MENU SETTING in the D (SET UP)
tab and press MENU/OK to display the
options at right.
マイメニュー設定
MY MENU SETTING
マイメニュー登録
順序変更
削除
MY MENU SETTING
RANK ITEMS
REMOVE ITEMS
Press the selector up or down to
highlight MY MENU SETTING and
press MENU/OK. Options that can be
added to “my menu” are highlighted
in blue.
MY MENU SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
GRAIN EFFECT
COLOR CHROME EFFECT
DYNAMIC RANGE
WHITE BALANCE
OK
N
3
SELECT
CANCEL
Items currently in “my menu” are indicated by check marks.
Highlight an item and press MENU/OK
to add it to “my menu”.
MYマイメニュー設定
MENU SETTING
1 画像サイズ
1 IMAGE
SIZE
4
5
決定
OK
SAVE
Press MENU/OK to return to the edit display.
Repeat Steps 3 and 4 until all the desired items have been
added.
N “My menu” can contain up to 16 items.
Editing “My Menu”
To reorder or delete items, select RANK ITEMS or REMOVE ITEMS in Step 1.
185
Shortcuts
移動
MOVE
9
MEMO
186
Peripherals and Optional
Accessories
187
Lenses
The camera can be used with lenses for the FUJIFILM
G-mount.
Lens Parts
Peripherals and Optional Accessories
A Lens hood
B Mounting marks
C Focus ring
D Aperture ring lock release
E Mounting marks (focal length)
F Aperture ring
G Lens signal contacts
H Front lens cap
I Rear lens cap
N A GF63mmF2.8 R WR lens is used here for illustrative purposes.
10
188
Lenses
Lens Care
Use a blower to remove dust, then gently wipe with a soft, dry
cloth. Any remaining stains can be removed by wiping gently
with a piece of FUJIFILM lens-cleaning paper to which a small
amount of lens-cleaning fluid has been applied. Replace the
front and rear caps when the lens is not in use.
Removing Lens Caps
Remove lens caps as shown.
Attaching Lens Hoods
When attached, lens hoods reduce glare and protect the front
lens element.
Peripherals and Optional Accessories
N Lens caps may differ from those shown.
10
189
Vertical Battery Grips
The optional VG-GF1 vertical battery grip accommodates
an extra battery for improved endurance and makes it easier to hold the camera rotated 90° to frame pictures in “tall”
(portrait) orientation.
Peripherals and Optional Accessories
10
A Shutter button
B Control lock
C Front command dial
D Fn2 (function 2) button
E Lock screw knob
F Tripod socket
G Fn1 (function 1) button
H Eyelet for camera strap
I Battery-chamber cover
J Lock screw
K Fn5 (function 5) button
L Focus stick (focus lever)
M Connector
N Compartment for connector cover supplied
with camera
O 15 V DC-IN connector
P Fn4 (function 4) button
Q Rear command dial
R Fn3 (function 3) button
S Q (quick menu) button
T MENU/OK button
U Indicator lamps
V Battery-chamber cover latch
O Do not attempt to attach the clips supplied with the camera to the
eyelets (H) on the battery grip.
N All controls perform the same function as the matching controls on
the camera.
190
Vertical Battery Grips
Attaching the VB-GF1
The VB-GF1 attaches as shown below.
1
Remove the vertical battery grip connector cover from the camera and
place it in the grip connector cover
compartment.
(B)
(A) (B)
(A)
Peripherals and Optional Accessories
2
Align the connectors on the grip
with the matching connectors on the
camera. Rotate the lock screw knob
to tighten the lock screw.
10
191
Inserting a Battery
Insert a battery as shown below.
1
Unlatch and open the battery-chamber cover.
2
Slide the battery in until it latches.
3
Close the battery-chamber cover.
Peripherals and Optional Accessories
O The battery in the grip is used before the battery in the camera. The
camera automatically switches to the camera battery when the battery in the grip is exhausted. Movie recording and bulb photography
will end when the camera switches batteries. When the battery in
the grip is exhausted, remove and charge the battery or insert a fully-charged spare battery. If the camera battery has enough charge to
power the camera, the battery in the grip can be replaced without
turning the camera off.
10
192
Vertical Battery Grips
Using an AC Adapter
An optional AC-15V AC adapter can be used to power the camera when the
battery grip is attached. The battery inserted in the grip will charge while
the adapter is connected; charging takes about 120 minutes. Turn the camera off before disconnecting the AC adapter.
Peripherals and Optional Accessories
Battery charge status is shown by battery status icons when the camera
is on (playback mode) and by the indicator lamp when the camera is off.
Battery status icon
Indicator lamp
(camera on)
(camera off )
Battery status
Y (yellow)
On
Battery charging
N (green)
Off
Charging complete
Z (red)
Blinks
Battery fault
10
193
Viewfinder Tilt Adapters
The optional EVF-TL1 tilt adapter lets you swivel the viewfinder left or right ±45° or up or down between 0° and 90°.
Peripherals and Optional Accessories
A Hot shoe
B Tilt lock knob
C Adapter lock release
D Horizontal swivel lock
10
194
E Connectors
F Connector cover
G Hot shoe cover
Viewfinder Tilt Adapters
Attaching the EVF-TL1
Slide the EVF-TL1 onto the camera hot
shoe and then attach the EVF-GFX1 electronic viewfinder.
N Remove the hot shoe covers from the camera and EVF-TL1 before
attaching the adapter and viewfinder.
Removing the EVF-TL1
Remove the viewfinder and then, keeping the
lock releases (A) pressed, press down on the
front of the adapter (B) and slide it from the
camera as shown.
Peripherals and Optional Accessories
O Use only one tilt adapter at a time.
10
195
Viewfinder Tilt Adapters
Using the EVF-TL1
Swivel the viewfinder into the desired position.
Swiveling the Viewfinder Up or Down
Loosen the tilt lock knob and swivel the
viewfinder up or down from 0° to 90°.
With the viewfinder in the desired position (A), tighten the tilt lock knob (B)
to lock the viewfinder in place.
Peripherals and Optional Accessories
10
Swiveling the Viewfinder Left or Right
Release the horizontal swivel lock as
shown and swivel the viewfinder left or
right ±45°.
With the viewfinder in the desired position (A), return the horizontal swivel
lock to the latched position (B) to lock
the viewfinder in place.
196
External Flash Units
Flash units can be mounted on the hot shoe or connected
via the sync terminal.
External flash units are more powerful than their built-in counterparts. Some support high-speed sync (FP) and can be used at
shutter speeds faster than the flash sync speed, while others can
function as master flash units controlling remote units via optical
wireless flash control.
O You may be unable to test-fire the flash in some circumstances, for
example when a setup menu is displayed on the camera.
Peripherals and Optional Accessories
Red-Eye Removal
Red-eye removal is available when an option other than OFF is selected
for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING >
FACE/EYE DETECTION SETTING is ON. Red-eye removal minimizes “redeye” caused when light from the flash is reflected from the subject’s retinas.
10
197
Flash Settings
To adjust settings for a flash unit mounted on the hot shoe or
connected via the sync terminal:
1
2
Connect the unit to the camera.
In shooting mode, select FLASH
FUNCTION SETTING in the F (FLASH
SETTING) menu tab. The options
available vary with the flash unit.
画質設定
FLASH
SETTING
画像サイズ
FLASH
FUNCTION SETTING
画質モード
RED
EYE REMOVAL
RAW 記録方式
TTL-LOCK MODE
フィルムシミュレーション
LED
LIGHT SETTING
グレイン・エフェクト
MASTER
SETTING
ダイナミックレンジ
CH
SETTING
ホワイトバランス
ハイライトトーン
終了
EXIT
Description
P
Displayed when no compatible flash unit is connected or
SYNC
if a unit is connected via the sync terminal or uses only 199
TERMINAL
the X-contact on the hot shoe.
SHOE MOUNT Displayed when an optional flash unit is mounted on the
200
FLASH
hot shoe and turned on.
Displayed if an optional flash unit functioning as a master
MASTER
flash for FUJIFILM optical wireless remote flash control is 203
(OPTICAL)
connected and turned on.
Menu
Peripherals and Optional Accessories
N SYNC TERMINAL will be also displayed if an incompatible flash
unit or no flash unit is connected.
3
Highlight items using the selector
and rotate the rear command dial to
change the highlighted setting.
MODE
10
SHOE MOUNT FLASH
ADJUST
4
Press DISP/BACK to put the changes into effect.
198
END
External Flash Units
SYNC TERMINAL
The following options are available when no compatible flash
unit is connected or if a unit is connected via the sync terminal or
uses only the X-contact on the hot shoe.
MODE
SYNC TERMINAL
ADJUST
END
Setting
The Sync Terminal
Use the sync terminal to connect flash units
that require a sync cable.
Peripherals and Optional Accessories
Description
Choose from the following options:
• M: A trigger signal is transmitted from the sync terminal and
hot shoe when a picture is taken. Choose a shutter speed
slower than the sync speed; even slower speeds may be
A Flash control mode required if the unit uses long flashes or has a slow response
time.
• OFF: The sync terminal and hot shoe do not transmit a trigger signal.
Choose whether the flash is timed to fire immediately after
the shutter opens (H/1ST CURTAIN) or immediately before
B Sync
it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in
most circumstances.
10
199
SHOE MOUNT FLASH
The following options are available when an optional
shoe-mounted flash unit is attached and turned on.
MODE
SHOE MOUNT FLASH
ADJUST
Setting
END
Peripherals and Optional Accessories
Description
The flash control mode selected with the flash unit. This can
in some cases be adjusted from the camera; the options available vary with the flash.
• TTL: TTL mode. Adjust flash compensation (B).
• M: The flash fires at the selected output regardless of subject
A Flash control mode brightness or camera settings. Output in some cases can be
adjusted from the camera (B).
• MULTI: Repeating flash. Compatible shoe-mounted flash
units will fire multiple times with each shot.
• OFF: The flash does not fire. Some flash units can be turned
off from the camera.
10
200
External Flash Units
Setting
201
Peripherals and Optional Accessories
Description
The options available vary with flash control mode.
• TTL: Adjust flash compensation (the full value may not be
applied if the limits of the flash control system are exceeded). In the cases of the EF-X20, EF-20, and EF-42, the selected value is added to the value selected with the flash unit.
B Flash compensation/ • M/MULTI: Adjust flash output (compatible units only).
output
Choose from values expressed as fractions of full power,
from ⁄ (mode M) or ¼ (MULTI) down to ⁄ in increments
equivalent to ⁄ EV. The desired results may not be achieved
at low values if they exceed the limits of the flash control
system; take a test shot and check the results.
Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected.
• E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon
displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
F (STANDARD): The flash fires with every shot if possible;
•
C Flash mode (TTL) flash level is adjusted according to subject brightness. The
flash will not fire if not fully charged when the shutter is
released.
• G (SLOW SYNC.): Combine the flash with slow shutter
speeds when photographing portrait subjects against a
backdrop of night scenery. The flash will not fire if not fully
charged when the shutter is released.
Control flash timing.
• H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice).
• I (2ND CURTAIN): The flash fires immediately before the
shutter closes.
D Sync
• AUTO FP(HSS): High-speed sync (compatible units only). The
camera automatically engages front-curtain high-speed
sync at shutter speeds faster than the flash sync speed.
Equivalent to 1ST CURTAIN when MULTI is selected for flash
control mode.
10
Setting
Peripherals and Optional Accessories
Description
The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be
E Zoom
made from the camera. If AUTO is selected, zoom will automatically be adjusted to match coverage to lens focal length.
If the unit supports this feature, choose from:
• J (FLASH POWER PRIORITY): Gain range by slightly reducing
coverage.
F Lighting
• K (STANDARD): Match coverage to picture angle.
• L (EVEN COVERAGE PRIORITY): Slightly increase coverage for
more even lighting.
Choose how the built-in LED light functions during still
photography (compatible units only): as a catchlight (M/
CATCHLIGHT), as an AF-assist illuminator (N/AF ASSIST), or
G LED light
as both a catchlight and an AF-ASSIST illuminator (O/AF
ASSIST+CATCHLIGHT). Choose OFF to disable the LED during
photography.
Choose the number of times the flash fires each time the
G Number of flashes * shutter is released in MULTI mode.
Choose the frequency at which the flash fires in MULTI mode.
H Frequency *
* Full value may not be applied if limits of flash control system are exceeded.
10
202
External Flash Units
MASTER(OPTICAL)
The options will be displayed if the unit is currently functioning
as master flash for FUJIFILM optical wireless remote flash control.
MODE
MASTER(OPTICAL)
ADJUST
C
A
B
Peripherals and Optional Accessories
The master and remote units can be
placed in up to three groups (A, B, and C)
and flash mode and flash level adjusted
separately for each group. Four channels are available for communication between the units; separate channels can
be used for different flash systems or to
prevent interference when multiple systems are operating in close proximity.
END
10
203
Setting
A Flash control mode
(group A)
B Flash control mode
(group B)
C Flash control mode
(group C)
D Flash compensation/
Peripherals and Optional Accessories
output (group A)
E Flash compensation/
output (group B)
F Flash compensation/
output (group C)
10
204
Description
Choose flash control modes for groups A, B, and C. TTL%
is available for groups A and B only.
• TTL: The units in the group fire in TTL mode. Flash compensation can be adjusted separately for each group.
• TTL%: If TTL% is selected for either group A or B, you can
specify the output of the selected group as a percentage of the other and adjust overall flash compensation
for both groups.
• M: In mode M, the units in the group fire at the selected
output (expressed as a fraction of full power) regardless
of subject brightness or camera settings.
• MULTI: Choosing MULTI for any group sets all the units
in all groups to repeating flash mode. All units will fire
multiple times with each shot.
• OFF: If OFF is selected, the units in the group will not fire.
Adjust flash level for the selected group according to
option selected for flash control mode. Note that the full
value may not be applied if the limits of the flash control
system are exceeded.
• TTL: Adjust flash compensation.
• M/MULTI: Adjust flash output.
• TTL%: Choose the balance between groups A and B and
adjust overall flash compensation.
External Flash Units
Setting
G Flash mode (TTL)
I Zoom
205
Peripherals and Optional Accessories
H Sync
Description
Choose a flash mode for TTL flash control. The options
available vary with the shooting mode (P, S, A, or M) selected.
• E (FLASH AUTO): The flash fires only as required; flash
level is adjusted according to subject brightness. A
p icon displayed when the shutter button is pressed
halfway indicates that the flash will fire when the photo
is taken.
• F (STANDARD): The flash fires with every shot if possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the
shutter is released.
• G (SLOW SYNC.): Combine the flash with slow shutter
speeds when photographing portrait subjects against a
backdrop of night scenery. The flash will not fire if not
fully charged when the shutter is released.
Control flash timing.
• H (1ST CURTAIN): The flash fires immediately after the
shutter opens (generally the best choice).
• I (2ND CURTAIN): The flash fires immediately before the
shutter closes.
• AUTO FP(HSS): High-speed sync (compatible units only).
The camera automatically engages front-curtain highspeed sync at shutter speeds faster than the flash sync
speed. Equivalent to 1ST CURTAIN when MULTI is selected for flash control mode.
The angle of illumination (flash coverage) for units that
support flash zoom. Some units allow the adjustment to
be made from the camera. If AUTO is selected, zoom will
automatically be adjusted to match coverage to lens focal
length.
10
External Flash Units
Setting
J Lighting
K Master
K Number of flashes
Peripherals and Optional Accessories
L Channel
L Frequency
10
206
Description
If the unit supports this feature, choose from:
• J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage.
• K (STANDARD): Match coverage to picture angle.
• L (EVEN COVERAGE PRIORITY): Slightly increase coverage
for more even lighting.
Assign the master flash to group A (Gr A), B (Gr B), or
C (Gr C). If OFF is selected, output from the master flash
will be held to a level that does not affect the final picture. Available only if the unit is mounted on the camera
hot shoe as a master flash for FUJIFILM optical wireless
remote flash control in TTL, TTL%, or M mode.
Choose the number of times the flash fires each time the
shutter is released in MULTI mode.
Choose the channel used by the master flash for communication with the remote flash units. Separate channels
can be used for different flash systems or to prevent interference when multiple systems are operating in close
proximity.
Choose the frequency at which the flash fires in MULTI
mode.
Connections
207
HDMI Output
Camera shooting and playback displays can be output to
HDMI devices.
Connecting to HDMI Devices
Connect the camera to TVs or other HDMI devices using a
third-party HDMI cable.
1
2
Turn the camera off.
Connect the cable as shown below, making sure the connectors are fully inserted.
Insert into HDMI
connector
Insert into HDMI Micro
connector (Type D)
O Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
Connections
11
3
Configure the device for HDMI input as described in the documentation supplied with the device.
4
Turn the camera on. You can now shoot and play back pictures while viewing the television display and save pictures
to the HDMI device.
O The USB cable can not be used while an HDMI cable is connected.
208
HDMI Output
Shooting
Shoot photos and record movies while viewing the scene through
the camera lens on or saving footage to the HDMI device.
Playback
To start playback, press the camera a button. The camera monitor turns off and pictures and movies are output to the HDMI
device. Note that the camera volume controls have no effect on
sounds played on the TV; use the television volume controls to
adjust the volume.
O Some televisions may briefly display a black screen when movie playback begins.
Connections
11
209
Wireless Transfer
Establish a wireless LAN connection between your camera
and smartphone.
For downloads and other information, visit:
http://fujifilm-dsc.com/wifi/
Wireless Connections: Smartphones
Install the “FUJIFILM Camera Remote” app on your smartphone
to browse the images on the camera, download selected images,
control the camera remotely, or copy location data to the camera.
Once the app is installed, connect using the A SHOOTING SETTING > WIRELESS COMMUNICATION or C PLAY BACK MENU >
WIRELESS COMMUNICATION options in the camera menus.
Connections
11
210
Connecting to Computers via USB
Connect the camera to a computer to download pictures
or take pictures remotely.
Tethered Shooting
Take pictures remotely.
Mac OS X/macOS
Tethered shooting is available to purchasers of Adobe® Photoshop®
Lightroom® and the FUJIFILM Tether Shooting PRO or Tether
Shooting plug-ins. The FUJIFILM Tether Shooting PRO and Tether
Shooting plug-ins are available from the Adobe add-ons website.
Windows
Tethered shooting is available to purchasers of HS-V5 or of Adobe®
Photoshop® Lightroom® and the FUJIFILM Tether Shooting PRO
or Tether Shooting plug-ins. The FUJIFILM Tether Shooting PRO
and Tether Shooting plug-ins are available from the Adobe addons website.
FUJIFILM X Acquire
Tethered shooting is also available to users of FUJIFILM X Acquire, which
can be downloaded free-of-charge from the FUJIFILM website.
Connections
11
211
Copying Pictures to a Computer
Pictures can be copied to Windows and Mac OS X/macOS computers as described below. For information on using the software
described, see online help.
Windows
Use MyFinePix Studio to copy pictures to your computer, where
they can be stored, viewed, organized, and printed. MyFinePix
Studio is available for download from the following website:
http://fujifilm-dsc.com/mfs/
Once download is complete, double-click the downloaded file
(“MFPS_Setup.EXE”) and follow the on-screen instructions to
complete installation.
Mac OS X/macOS
Pictures can be copied to your computer using Image Capture
(supplied with your computer) or other software.
Viewing RAW Files
To view RAW files on your computer, use the RAW FILE CONVERTER EX 2.0,
available for download from:
http://fujifilm-dsc.com/rfc/
Connections
11
212
Connecting to Computers via USB
Connecting the Camera
1 Find a memory card containing pictures you want to copy to
the computer and insert the card into the camera.
O Loss of power during transfer could result in loss of data or dam-
age to the memory card. Insert a fresh or fully-charged battery
before connecting the camera.
2
Turn the camera off and connect a third-party USB 3.0 or 2.0
cable (either type can be used), making sure the connectors
are fully inserted.
Micro USB (Micro-B) Micro USB (Micro-B)
USB 2.0
USB 3.0
O Use a USB 3.0 cable for higher speeds with computers that support USB 3.0.
Turn the camera on.
5
When transfer is complete, turn the camera off and disconnect the USB cable.
Copy pictures to your computer. During tethered shooting,
you can copy pictures using tethered shooting software such
as the FUJIFILM Tethered Shooting Plug-in PRO. Otherwise
you can use MyFinePix Studio or applications provided with
your operating system.
213
Connections
3
4
11
Connecting to Computers via USB
O If a memory card containing a large number of images is inserted,
there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer
pictures.
The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer. Connect the camera directly to the computer;
do not use a USB hub or keyboard.
Do not disconnect the USB cable while data are being exchanged between the camera and computer or insert or remove memory cards
while transfer is in progress. Failure to observe this precaution could
result in loss of data or damage to the memory card.
In some cases, it may not be possible to access pictures saved to a
network server using the software in the same way as on a standalone
computer.
The user bears all applicable fees charged by the phone company or
Internet service provider when using services that require an Internet
connection.
Connections
11
214
instax SHARE Printers
Print pictures from your digital camera to instax SHARE
printers.
Establishing a Connection
Select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID)
and password.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the
bottom of the printer; the default password is
“1111”. If you have already chosen a different
password to print from a smartphone, enter
that password instead.
Connections
11
215
instax SHARE Printers
Printing Pictures
1 Turn the printer on.
2
Select C PLAY BACK MENU > instax
PRINTER PRINT. The camera will connect to the printer.
PRINTER PRINT
instax-12345678
CONNECTING TO PRINTER
FUJIFILM-CAMERA-1234
CANCEL
N To print a frame from a burst sequence, display the frame before
selecting instax PRINTER PRINT.
3
Use the selector to display the picture you want to print, then press
MENU/OK.
PRINTER PRINT
100-0020
TRANSMIT
instax-12345678
CANCEL
N Pictures taken with other cameras can not be printed.
The area printed is smaller than the area visible in the LCD monitor.
4
The picture will be sent to the printer and printing will start.
Connections
11
216
Technical Notes
217
Accessories from FUJIFILM
The following optional accessories are available from
FUJIFILM. For the latest information on the accessories
available in your region, check with your local FUJIFILM
representative or visit http://www.fujifilm.com/products/
digital_cameras/index.html.
Rechargeable Li-ion batteries
NP-T125: Additional high-capacity NP-T125 rechargeable batteries
can be purchased as required.
Battery chargers
BC-T125: Replacement battery chargers can be purchased as required.
AC power adapters
AC-15V: Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback, when copying pictures to a computer, or to charge the battery in the camera or optional battery
grip.
Remote releases
RR-90: Use to reduce camera shake or keep the shutter open
during a time exposure.
Stereo microphones
MIC-ST1: An external microphone for movie recording.
Technical Notes
FUJINON lenses
GF-series lenses: Interchangeable lenses for use exclusively with
the FUJIFILM G-mount.
12
218
Accessories from FUJIFILM
Vertical battery grips
VG-GFX1: This grip accommodates an extra battery for improved
endurance and makes it easier to hold the camera rotated 90° to
frame pictures in “tall” (portrait) orientation. The battery in the grip
can be charged using an optional AC-15V AC adapter.
Tilt adapters
EVF-TL1: This adapter lets you swivel the viewfinder left or right
±45° or up or down between 0° and 90° to take shots from different angles.
Technical Notes
Shoe-mounted flash units
EF-X500: This clip-on flash unit has a Guide Number of 50/164 (ISO
100, m/ft.) and supports FP (high-speed sync), allowing it to be
used at shutter speeds that exceed the flash sync speed. Powered by four AA batteries or an optional BF-BP1 battery pack, it
supports manual and TTL flash control and auto power zoom in
the range 24–105 mm (35 mm format equivalent) and features
FUJIFILM optical wireless flash control, allowing it to be used as
a master or remote flash unit for remote wireless flash photography. The flash head can be rotated 90° up, 10° down, 135° left, or
180° right for bounce lighting.
EF-42: This clip-on flash unit (powered by four AA batteries) has
a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control and auto power zoom in the range
24–105 mm (35 mm format equivalent). The flash head can be
rotated 90° up, 180° left, or 120° right for bounce lighting.
EF-X20: This clip-on flash unit has a Guide Number of 20/65 (ISO
100, m/ft.). Powered by two AAA batteries, this light, compact
unit features a dial for adjusting TTL flash compensation or manual flash output.
EF-20: This clip-on flash unit (powered by two AA batteries) has
a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash
control (manual flash control is not supported). The flash head
can be rotated upwards 90° for bounce lighting.
12
219
Accessories from FUJIFILM
Body caps
BCP-002: Cover the camera lens mount when no lens is attached.
instax SHARE printers
SP-1/SP-2: Connect via wireless LAN to print pictures on instax film.
Technical Notes
12
220
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
Instructions: All the safety and operating instructions
• Read Instructions
should be read before the appliance is operated.
Instructions: The safety and operating instructions
• Retain Instructions
should be retained for future reference.
Warnings: All warnings on the appliance and in the
• Heed Warnings
operating instructions should be adhered to.
Instructions All operating and use instructions
• Follow Instructions:
should be followed.
Antennas
Outdoor Antenna Grounding: If an outside antenna or cable
system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code, ANSI/NFPA No.
70, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL
ELECTRICAL CODE
Ground Clamp
Electric Servicee Equipmentt
Antenna Lead
in Wire
AAnntenna
Discharge Unit
D
(NEC
N SECTION
8
810-20)
Ground Clamps
Power Service Grounding Electrode
System (NEC ART 250. PART H)
Grounding
Conductors (NEC
SECTION 810-21)
Technical Notes
Installation
Power Sources: This video product should be operated only
from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company. For video products intended to operate from battery
power, or other sources, refer to the operating instructions.
Grounding or Polarization: This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
Alternate Warnings: This video product is equipped with
a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding type plug.
Overloading: Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
Ventilation: Slots and openings in the cabinet are provided
for ventilation, to ensure reliable operation of the video product and to protect it from overheating, and these openings
must not be blocked or covered. The openings should never
be blocked by placing the video product on a bed, sofa, rug,
or other similar surface.
This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been adhered to. This video product should never be placed near or
over a radiator or heat register.
Attachments: Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near water—for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
Accessories: Do not place this video product on an unstable
cart, stand, tripod, bracket, or table. The video product may
fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the video product. Any mounting of the appliance
should follow the manufacturer’s instructions, and should use
a mounting accessory recommended by the manufacturer.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and
cart combination to overturn.
12
221
Power Lines: An outside antenna system should not be locat- Damage Requiring Service: Unplug this video product from
ed in the vicinity of overhead power lines or other electric the wall outlet and refer servicing to qualified service personlight or power circuits, or where it can fall into such power nel under the following conditions:
lines or circuits. When installing an outside antenna system, • When the power-supply cord or plug is damaged
extreme care should be taken to keep from touching such • If liquid has been spilled, or objects have fallen into the
power lines or circuits as contact with them might be fatal.
video product.
• If the video product has been exposed to rain or water.
Use
If the video product has been dropped or the cabinet has
Cleaning: Unplug this video product from the wall outlet be- •
been damaged.
fore cleaning. Do not use liquid cleaners or aerosol cleaners.
If the video product does not operate normally follow the
Use a damp cloth for cleaning.
operating instructions. Adjust only those controls that are
Object and Liquid Entry: Never push objects of any kind into covered by the operating instructions as an improper adjustthis video product through openings as they may touch dan- ment of other controls may result in damage and will often
gerous voltage points or short out parts that could result in require extensive work by a qualified technician to restore
a fire or electric shock. Never spill liquid of any kind on the the video product to its normal operation.
video product.
When the video product exhibits a distinct change in perforLightning: For added protection for this video product re- mance — this indicates a need for service.
ceiver during a lightning storm, or when it is left unattended
Replacement Parts: When replacement parts are required, be
and unused for long periods of time, unplug it from the wall
sure the service technician has used replacement parts specoutlet and disconnect the antenna or cable system. This will
ified by the manufacturer or have the same characteristics as
prevent damage to the video product due to lightning and
the original part. Unauthorized substitutions may result in
power-line surges.
fire, electric shock or other hazards.
Service
Safety Check: Upon completion of any service or repairs to
Servicing: Do not attempt to service this video product this video product, ask the service technician to perform
yourself as opening or removing covers may expose you to safety checks to determine that the video product is in propdangerous voltage or other hazards. Refer all servicing to er operating condition.
qualified service personnel.
Be sure to read these notes before use
Safety Notes
• Make sure that you use your camera correctly. Read these
The symbols on the product (including the accesories) represent the following:
AC
DC
Class II equipment (The construction of the product
is double-insulated.)
safety notes and your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate
the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is
used incorrectly as a result.
This icon indicates that death or serious injury can result if the information is ignored.
This icon indicates that personal injury or
CAUTION material damage can result if the information is ignored.
WARNING
WARNING
Unplug
from power
socket
Technical Notes
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an
action that must be performed (“Required”).
12
222
Do not use in
the bathroom
or shower
If a problem arises, turn the camera off, remove the battery, and disconnect and unplug the AC power adapter.
Continued use of the camera when it is emitting
smoke, is emitting any unusual odor, or is in any
other abnormal state can cause a fire or electric
shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the camera. If water or foreign objects get inside the camera, turn the camera off, remove the battery, and
disconnect and unplug the AC power adapter. Continued use of the camera can cause a fire or electric
shock. Contact your FUJIFILM dealer.
Do not use the camera in the bathroom or shower. This
can cause a fire or electric shock.
For Your Safety
WARNING
Do not
disassemble
Do not touch
internal
parts
WARNING
Using a flash too close to a person’s eyes may cause visual
impairment. Take particular care when photographing infants and young children.
Do not remain in prolonged contact with hot surfaces.
Failure to observe this precaution could result in
low-temperature burns, particularly at high ambient
temperatures or with users who suffer from poor
circulation or reduced sensation, in which case use
of a tripod or similar precautions are recommended.
Do not leave one part of the body in contact with the
product for prolonged periods while the product is on.
Failure to observe this precaution could result in
low-temperature burns, particularly during prolonged use, at high ambient temperatures, or with
users who suffer from poor circulation or reduced
sensation, in which case use of a tripod or similar
precautions are recommended.
Do not use in the presence of flammable objects, explosive gases, or dust.
When carrying the battery, install it in a digital camera
or keep it in the hard case. When storing the battery,
keep it in the hard case. When discarding, cover the
battery terminals with insulation tape. Contact with
other metallic objects or batteries could cause the
battery to ignite or burst.
Keep memory cards, hot shoes, and other small parts out
of the reach of small children. Children may swallow
small parts; keep out of reach of children. Should
a child swallow a small part, seek medical attention
or call emergency.
Keep out of reach of small children. Among the elements that could cause injury are the strap, which
could become entangled about a child’s neck, causing strangulation, and the flash, which could cause
visual impairment.
Follow the directions of airline and hospital personnel.
This product generates radio-frequency emissions
that could interfere with navigational or medical
equipment.
CAUTION
Do not use this camera in locations affected by oil fumes,
steam, humidity or dust. This can cause a fire or electric shock.
Do not leave this camera in places subject to extremely
high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight.
This can cause a fire.
Do not place heavy objects on the camera. This can cause
the heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still
connected. Do not pull on the connection cord to disconnect the AC power adapter. This can damage the
power cord or cables and cause a fire or electric shock.
223
Technical Notes
Never attempt to change or take apart the camera (never
open the case). Failure to observe this precaution can
cause fire or electric shock.
Should the case break open as the result of a fall or other
accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or
in injury from touching the damaged parts. Remove
the battery immediately, taking care to avoid injury
or electric shock, and take the product to the point
of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the connection cord. These actions could damage the cord and
cause a fire or electric shock. If the cord is damaged,
contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This
can cause the camera to fall or tip over and cause
injury.
Never attempt to take pictures while in motion. Do not
use the camera while walking or driving. This can
result in you falling down or being involved in a
traffic accident.
Do not touch any metal parts of the camera during a
thunderstorm. This can cause an electric shock due
to induced current from the lightning discharge.
Do not use the battery except as specified. Load the
battery as shown by the indicator.
Do not disassemble, modify, or heat batteries. Do not
drop, strike, or throw batteries or otherwise subject
them to strong impacts. Do not use batteries that show
signs of leaking, deformation, discoloration, or other
abnormalities. Use only designated chargers to recharge
rechargeable batteries and do not attempt to recharge
non-rechargeable Li-ion or alkaline batteries. Do not
short batteries or store them with metallic objects. Failure to observe these precautions could result in the
batteries overheating, igniting, rupturing, or leaking,
causing fire, burns, or other injury.
Use only batteries or AC power adapters specified for
use with this camera. Do not use voltages other than the
power supply voltage shown. The use of other power
sources can cause a fire.
If the battery leaks and fluid gets in contact with your
eyes, skin or clothing, flush the affected area with clean
water and seek medical attention or call an emergency
number right away.
Do not use the charger to charge batteries other than
those specified here. The supplied charger is for use
only with batteries of the type supplied with the
camera. Using the charger to charge conventional
batteries or other types of rechargeable batteries
can cause the battery to leak, overheat or burst.
12
CAUTION
Do not cover or wrap the camera or the AC power adapter
in a cloth or blanket. This can cause heat to build up
and distort the casing or cause a fire.
When you are cleaning the camera or you do not plan to
use the camera for an extended period, remove the battery and disconnect and unplug the AC power adapter.
Failure to do so can cause a fire or electric shock.
When charging ends, unplug the charger from the power
socket. Leaving the charger plugged into the power
socket can cause a fire.
Technical Notes
12
CAUTION
When a memory card is removed, the card could come
out of the slot too quickly. Use your finger to hold it and
gently release the card. Injury could result to those
struck by the ejected card.
Request regular internal testing and cleaning for your
camera. Build-up of dust in your camera can cause a
fire or electric shock. Contact your FUJIFILM dealer
to request internal cleaning every two years. Please
note that this service is not free of charge.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
The Battery and Power Supply
Note: Check the type of battery used in your camera and read ■ Storage
the appropriate sections.
Performance may be impaired if the battery is left unused
The following describes the proper use of batteries and how for extended periods when fully charged. Run the battery
to prolong their life. Incorrect use can shorten battery life or flat before storing it.
cause leakage, overheating, fire, or explosion.
If the camera will not be used for an extended period, remove the battery and store it in a dry place with an ambient
Li-ion Batteries
temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do
Read this section if your camera uses a rechargeable Li-ion
not store in locations exposed to extremes of temperature.
battery.
■ Cautions: Handling the Battery
The battery is not charged at shipment. Charge the battery
• Do not transport or store with metal objects such as neckbefore use. Keep the battery in its case when not in use.
laces or hairpins.
■ Notes on the Battery
• Do not expose to flame or heat.
The battery gradually loses its charge when not in use. • Do not disassemble or modify.
Charge the battery one or two days before use.
• Use with designated chargers only.
Battery life can be extended by turning the camera off when • Dispose of used batteries promptly.
not in use.
• Do not drop or subject to strong physical shocks.
Battery capacity decreases at low temperatures; a depleted • Do not expose to water.
battery may not function when cold. Keep a fully charged • Keep the terminals clean.
spare battery in a warm place and exchange as necessary, • The battery and camera body may become warm to the
or keep the battery in your pocket or other warm place and touch after extended use. This is normal.
insert it in the camera only when shooting. Do not place the ■ Disposal
battery in direct contact with hand warmers or other heating Dispose of used batteries in accord with local regulations.
devices.
AC Power Adapters (Available Separately)
■ Charging the Battery
Use only FUJIFILM AC power adapters designated for use
Charge the battery in the supplied battery charger. Charging with this camera. Other adapters could damage the camera.
times will increase at ambient temperatures below +10 °C • The AC power adapter is for indoor use only.
(+50 °F) or above +35 °C (+95 °F). Do not attempt to charge • Be sure the DC plug is securely connected to the camera.
the battery at temperatures above +40 °C (+104 °F); at tem- • Turn the camera off before disconnecting the adapter. Disperatures below +5 °C (+41 °F), the battery will not charge.
connect the adapter by the plug, not the cable.
Do not attempt to recharge a fully charged battery. The bat- • Do not use with other devices.
tery does not however need to be fully discharged before • Do not disassemble.
charging.
• Do not expose to high heat and humidity.
The battery may be warm to the touch immediately after • Do not subject to strong physical shocks.
• The adapter may hum or become hot to the touch during
charging or use. This is normal.
use. This is normal.
■ Battery Life
If the adapter causes radio interference, reorient or relocate
At normal temperatures, the battery can be recharged about •
the receiving antenna.
300 times. A noticeable decrease in the length of time the
battery will hold a charge indicates that it has reached the
end of its service life and should be replaced.
224
For Your Safety
Using the Camera
Trademark Information
such as the sun in a cloudless sky. Failure to observe this Digital Split Image is a trademark or registered trademark
precaution could damage the camera image sensor.
of FUJIFILM Corporation. xD-Picture Card and E are
• Strong sunlight focused through the viewfinder may dam- trademarks of FUJIFILM Corporation. The typefaces included
age the panel of electronic viewfinder (EVF). Do not aim herein are solely developed by DynaComware Taiwan Inc.
the electronic viewfinder at the sun.
Macintosh, Mac OS, and macOS are trademarks of Apple
Inc. in the U.S.A. and other countries. Windows is a regisTake Test Shots
tered trademark of Microsoft Corporation in the U.S.A. and
Before taking photographs on important occasions (such as
other countries. Adobe, the Adobe logo, Photoshop, and
at weddings or before taking the camera on a trip), take a
Lightroom are trademarks or registered trademarks of Adobe
test shot and view the results to ensure that the camera is
Systems Incorporated in the U.S.A. and other countries.
functioning normally. FUJIFILM Corporation can not accept
Wi-Fi® and Wi-Fi Protected Setup® are registered trademarks
liability for damages or lost profits incurred as a result of
of the Wi-Fi Alliance. The SDHC and SDXC logos are tradeproduct malfunction.
marks of SD-3C, LLC. The HDMI logo is a trademark. All other
Notes on Copyright
trade names mentioned in this manual are the trademarks or
Unless intended solely for personal use, images recorded registered trademarks of their respective owners.
using your digital camera system cannot be used in ways
Electrical Interference
that infringe copyright laws without the consent of the ownThis camera may interfere with hospital or aviation equiper. Note that some restrictions apply to the photographing
ment. Consult with hospital or airline staff before using the
of stage performances, entertainments, and exhibits, even
camera in a hospital or on an aircraft.
when intended purely for personal use. Users are also asked
to note that the transfer of memory cards containing images Color Television Systems
or data protected under copyright laws is only permissible NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in the U.S.A.,
within the restrictions imposed by those copyright laws.
Canada, and Japan. PAL (Phase Alternation by Line) is a color
Handling
television system adopted mainly in European countries and
To ensure that images are recorded correctly, do not subject
China.
the camera to impact or physical shocks while images are
being recorded.
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera file format in which
Liquid Crystal
information stored with photographs is used for optimal colIn the event that the display is damaged, care should be takor reproduction during printing.
en to avoid contact with liquid crystal. Take the urgent action
indicated should any of the following situations arise:
IMPORTANT NOTICE: Read Before Using the Software
• If liquid crystal comes in contact with your skin, clean the Direct or indirect export, in whole or in part, of licensed softarea with a cloth and then wash thoroughly with soap and ware without the permission of the applicable governing
running water.
bodies is prohibited.
• If liquid crystal enters your eyes, flush the affected eye with
clean water for at least 15 minutes and then seek medical
assistance.
• If liquid crystal is swallowed, rinse your mouth thoroughly
with water. Drink large quantities of water and induce vomiting, then seek medical assistance.
Although the display is manufactured using extremely
high-precision technology, it may contain pixels that are
always lit or that do not light. This is not a malfunction, and
images recorded with the product are unaffected.
• Do not aim the camera at extremely bright light sources,
Technical Notes
12
225
NOTICES
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Please read the “Safety Notes” and make sure you understand them before using the camera.
Perchlorate Material—special handling may apply. See:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate
For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Contains IC : 7736B-02000003
Contains FCC ID : W2Z-02000003
FCC Statement: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Technical Notes
12
226
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This
device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the U.S.
Government.
The exposure standard for wireless device employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are
conducted using standard operating positions accepted by
the FCC with the device transmitting at its highest certified
power level in all tested frequency bands.
Notes on the Grant: To comply with Part 15 of the FCC Rules,
this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord.
A lithium ion battery that is recyclable powers
the product you have purchased. Please call
1-800-8-BATTERY for information on how to
recycle this battery.
For Your Safety
For Customers in Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
Industry Canada statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference,
including interference that may cause undesired operation
of the device.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter,
except tested built-in radios. The County Code Selection
feature is disabled for products marketed in the US/ Canada.
Radiation Exposure Statement: The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no
proof, however, that these low power wireless devices are
absolutely safe. Low power Wireless devices emit low levels
of radio frequency energy (RF) in the microwave range while
being used. Whereas high levels of RF can produce health
effects (by heating tissue), exposure of low-level RF that does
not produce heating effects causes no known adverse health
effects. Many studies of low-level RF exposures have not
found any biological effects. Some studies have suggested
that some biological effects might occur, but such findings
have not been confirmed by additional research. GFX 50S
has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and
meets RSS-102 of the IC radio frequency (RF) Exposure rules.
Disposal of Electrical and Electronic Equipment in Private Households
In the European Union, Norway, Iceland and
Liechtenstein: This symbol on the product, or in
the manual and in the warranty, and/or on its
packaging indicates that this product shall not
be treated as household waste. Instead it should
be taken to an applicable collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences to the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
This symbol on the batteries or accumulators indicates that those batteries shall not be treated
as household waste.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your
local requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling this
product, please contact your local city office, your household
waste disposal service or the shop where you purchased the
product.
In Countries Outside the European Union, Norway, Iceland and
Liechtenstein: If you wish to discard this product, including
the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal.
In Japan: This symbol on the batteries indicates
that they are to be disposed of separately.
Technical Notes
12
227
Be sure to read these notes before use
Safety Notes
WARNING
• Make sure that you use the lens correctly. Read these safety
notes and the camera Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
Do not
immerse
About the Icons
The icons shown below are used in this document to indicate
the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is
used incorrectly as a result.
Do not
disassemble
This icon indicates that death or serious injury can result if the information is ignored.
This icon indicates that personal injury or
CAUTION material damage can result if the information is ignored.
Do not touch
internal
parts
WARNING
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an
action that must be performed (“Required”).
Technical Notes
12
228
Do not immerse in or expose to water. Failure to observe this precaution can cause a fire or electric
shock.
Do not disassemble (do not open the case). Failure
to observe this precaution can cause fire, electric
shock, or injury due to product malfunction.
Should the case break open as the result of a fall or other
accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or
in injury from touching the damaged parts. Remove
the battery immediately, taking care to avoid injury
or electric shock, and take the product to the point
of purchase for consultation.
Do not place on unstable surfaces. The product may
fall, causing injury.
Do not view the sun through the lens or camera viewfinders. Failure to observe this precaution can cause
permanent visual impairment.
CAUTION
Do not use or store in locations that are exposed to
steam, or smoke or are very humid or extremely dusty.
Failure to observe this precaution can cause fire or
electric shock.
Do not leave in direct sunlight or in locations subject to
very high temperatures, such as in a closed vehicle on
a sunny day. Failure to observe this precaution can
cause fire.
Keep out of the reach of small children. This product
could cause injury in the hands of a child.
Do not handle with wet hands. Failure to observe this
precaution can cause electric shock.
Keep the sun out of the frame when shooting backlit subjects. Sunlight focused into the camera when the
sun is in or close to the frame can cause fire or burns.
When the product is not in use, replace the lens caps and
store out of direct sunlight. Sunlight focused by the
lens can cause fire or burns.
Do not carry the camera or lens while they are attached
to a tripod. The product can fall or strike other objects, causing injury.
For Your Safety
European Union Regulatory Notice
This product complies with the following EU Directives:
• RoHS Directive 2011/65/EU
• RE Directive 2014/53/EU
Hereby, FUJIFILM Corporation declares that the radio
equipment type FF160005 is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address: http://www.fujifilm.com/
products/digital_cameras/gfx/fujifilm_gfx_50s/pdf/index/
fujifilm_gfx_50s_cod.pdf
This compliance is indicated by the following conformity
marking placed on the product:
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth).
IMPORTANT: Read the following notices before using the camera’s built-in wireless transmitter.
Q This product, which contains encryption function developed in the United States, is controlled by the United
States Export Administration Regulations and may not
be exported or re-exported to any country to which the
United States embargoes goods.
network.. FUJIFILM does not ac• Use only as part of a wireless network
cept liability for damages resulting from unauthorized use.
Do not use in applications requiring a high degree of reliability, for example in medical devices or other systems that
may directly or indirectly impact human life. When using
the device in computer and other systems that demand a
greater degree of reliability than wireless networks, be sure
to take all necessary precautions to ensure safety and prevent malfunction.
• Use only in the country in which the device was purchased. This
device conforms to regulations governing wireless network
devices in the country in which it was purchased. Observe
all location regulations when using the device. FUJIFILM
does not accept liability for problems arising from use in
other jurisdictions.
• Wireless data (images) may be intercepted by third parties. The
security of data transmitted over wireless networks is not
guaranteed.
• Do not use the device in locations subject to magnetic fields,
static electricity, or radio interference. Do not use the transmitter in the vicinity of microwave ovens or in other locations subject to magnetic fields, static electricity, or radio
interference that may prevent reception of wireless signals.
Mutual interference may occur when the transmitter is
used in the vicinity of other wireless devices operating in
the 2.4 GHz band.
• The wireless transmitter operates in the 2.4 GHz band using DSSS
and OFDM modulation.
Wireless Network Devices: Cautions
• This device operates on the same frequency as commercial, educational, and medical devices and wireless transmitters. It also oper-
ates on the same frequency as licensed transmitters and special unlicensed low-voltage transmitters used in RFID tracking
systems for assembly lines and in other similar applications.
• To prevent interference with the above devices, observe the following precautions. Confirm that the RFID transmitter is not in
operation before using this device. Should you observe that the device causes interference in licensed transmitters used
for RFID tracking, immediately stop using the affected frequency or move the device to another location. If you notice that
this device causes interference in low-voltage RFID tracing systems, contact a FUJIFILM representative.
This sticker indicates that this device operates in the 2.4 GHz band using DSSS and OFDM modulation and may cause interference at distances of up to 40 m.
2.4DS/OF4
Technical Notes
12
229
Product Care
To ensure continued enjoyment of the product, observe
the following precautions.
Camera body: Use a soft, dry cloth to clean the camera body after
each use. Do not use alcohol, thinner, or other volatile chemicals,
which could discolor or deform the leather on the camera body.
Any liquid on the camera should be removed immediately with
a soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then gently wipe with a
soft, dry cloth. Any remaining stains can be removed by wiping
gently with a piece of FUJIFILM lens-cleaning paper to which a
small amount of lens-cleaning fluid has been applied. To prevent
dust entering the camera, replace the body cap when no lens is
in place.
Image sensor: Multiple photographs marred by spots or blotches in
identical locations may indicate the presence of dust on the image sensor. Clean the sensor using D USER SETTING > SENSOR
CLEANING.
Technical Notes
12
230
Cleaning the Image Sensor
Dust that can not be removed using D USER SETTING >
SENSOR CLEANING can be removed manually as described below.
O Note that there will be a charge to repair or replace the image sensor
if it is damaged during cleaning.
1
Use a blower (not a brush) to remove
dust from the sensor.
O Do not use a brush or blower brush.
Failure to observe this precaution
could damage the sensor.
2
Check whether the dust has been successfully removed. Repeat Steps 1 and 2 as necessary.
3
Replace the body cap or lens.
Technical Notes
12
231
Firmware Updates
Updates to product firmware may result in changes not
described in the manual. For more information, visit:
http://www.fujifilm.com/support/digital_cameras/software
Checking the Firmware Version
O The camera will only display the firmware version if a memory card is
inserted.
1
Turn the camera off and check that a memory card is inserted.
2
Turn the camera on while holding the DISP/BACK button. The
current firmware version will be displayed; check the firmware version.
3
Turn the camera off.
Technical Notes
12
232
Troubleshooting
Consult the table below should you encounter problems
using your camera. If you don’t find the solution here, contact your local FUJIFILM distributor.
Power and Battery
Problem
Solution
• The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 27).
The camera does not
turn on.
• The battery is inserted incorrectly: Reinsert in the correct orientation (P 30).
• The battery-chamber cover is not latched:
Technical Notes
Latch the battery-chamber cover (P 30).
The monitor may not turn on if the camera is turned off
The monitor does not
and then on again very quickly. Press the shutter button
turn on.
halfway to activate the monitor.
• The battery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera immediately before taking a picture.
• There is dirt on the battery terminals: Clean the terminals
The battery runs down with a soft, dry cloth.
quickly.
• ON is selected for G AF/MF SETTING > PRE-AF: Turn
PRE-AF off (P 99).
• The battery has been charged many times: The battery has
reached the end of its charging life. Purchase a new battery.
The camera turns off
The battery is exhausted: Charge the battery or insert a fulsuddenly.
ly-charged spare battery (P 27).
Reinsert the battery in the correct orientation and make
Charging does not start.
sure that the charger is plugged in (P 27, 30).
Charging is slow.
Charge the battery at room temperature.
12
233
Problem
Solution
• There is dirt on the battery terminals: Clean the terminals
The charging lamp
blinks, but the battery
does not charge.
with a soft, dry cloth (P 30).
• The battery has been charged many times: The battery has
reached the end of its charging life. Purchase a new
battery. If the battery still fails to charge, contact your
FUJIFILM dealer (P 218).
Menus and Displays
Problem
Solution
Select ENGLISH for D USER SETTING > a
Display is not in English.
(P 38, 148).
Shooting
Problem
Solution
• The memory card is full: Insert a new memory card or delete
pictures (P 32, 129).
• The memory card is not formatted: Format the memory card
(P 146).
• There is dirt on the memory card contacts: Clean the contacts
Technical Notes
12
with a soft, dry cloth.
No picture is taken when
The memory card is damaged: Insert a new memory card
•
the shutter button is
(P 32).
pressed.
• The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 27).
• The camera has turned off automatically: Turn the camera on
(P 35).
• You are using a third-party mount adapter: Select ON for
SHOOT WITHOUT LENS (P 165).
Mottling (“noise”)
Gain is increased to aid composition when the subject is
appears in the monitor
poorly lit and aperture is stopped down, which may result
or viewfinder when
in noticeable mottling when images are previewed in the
the shutter button is
displays. Images taken with the camera are unaffected.
pressed halfway.
The camera does not
The subject is not suited to autofocus: Use focus lock or manual
focus.
focus (P 78).
234
Troubleshooting
Problem
Solution
• The subject’s face is obscured by sunglasses, a hat, long hair, or
other objects: Remove the obstructions (P 100).
• The subject’s face occupies only a small area of the frame:
Change the composition so that the subject’s face occupies a larger area of the frame (P 100).
• The subject’s head is tilted or horizontal: Ask the subject to
hold their head straight (P 100).
• The camera is tilted: Keep the camera level.
• The subject’s face is poorly lit: Shoot in bright light.
The selected subject is closer to the center of the frame
Wrong subject is
than the main subject. Recompose the picture or turn
selected.
face detection off and frame the picture using focus lock
(P 78).
The battery is exhausted: Charge the battery or insert a fulThe flash does not fire.
ly-charged spare battery (P 27).
• The subject is not in range of the flash: Position the subject in
range of the flash.
The flash does not fully
The flash window is obstructed: Hold the camera correctly.
•
light the subject.
• Shutter speed is faster than the sync speed: Choose a slower
shutter speed (P 54, 60, 244).
• The lens is dirty: Clean the lens (P 189).
• The lens is blocked: Keep objects away from the lens
(P 41).
Pictures are blurred.
• s is displayed during shooting and the focus frame is displayed in red: Check focus before shooting (P 42).
• Shutter speed is slow and the ambient temperature is high: This
is normal and does not indicate a malfunction.
• Pixel mapping is required: Perform pixel mapping using
H IMAGE QUALITY SETTING > PIXEL MAPPING
Pictures are mottled.
(P 95).
• The camera has been used continuously at high temperatures or
a temperature warning is displayed: Turn the camera off and
wait for it to cool down (P 35, 241).
No face is detected.
Technical Notes
12
235
Playback
Problem
Solution
The pictures were taken with a different make or model of
Pictures are grainy.
camera.
Playback zoom is
The pictures were created using RESIZE or with a different
unavailable.
make or model of camera.
• Playback volume is too low: Adjust playback volume
(P 152).
No sound in movie
• The microphone was obstructed: Hold the camera correctly
during recording.
playback.
• The speaker is obstructed: Hold the camera correctly during
playback.
Some of the pictures selected for deletion are protected.
Selected pictures are not
Remove protection using the device with which it was
deleted.
originally applied (P 133).
The battery-chamber cover was opened while the camFile numbering is
era was on. Turn the camera off before opening the batunexpectedly reset.
tery-chamber cover (P 169).
Connections
Problem
The monitor is blank.
No picture or sound
on TV.
Technical Notes
12
Both the TV and camera
monitor are blank.
The computer does not
recognize the camera.
Can not transfer RAW or
JPEG files to computer.
236
Solution
The camera is connected to a TV: Pictures will be displayed on
the TV instead of in the camera monitor (P 16, 208).
• The camera is not properly connected: Connect the camera
properly (P 16, 208).
• Input on the television is set to “TV”: Set input to “HDMI”
(P 16, 208).
• The volume on the TV is too low: Use the controls on the television to adjust the volume (P 16, 208).
The display mode selected with the VIEW MODE button is EVF
ONLY + E: Put your eye to the viewfinder or use the
VIEW MODE button to choose another display mode.
Be sure the camera and computer are correctly connected
(P 211).
Use MyFinePix Studio to transfer pictures (Windows only;
P 211).
Troubleshooting
Wireless Transfer
For additional information on troubleshooting wireless connections, visit: http://digital-cameras.support.fujifilm.com/app?pid=x
Problem
Problem connecting or
uploading pictures to
smartphone.
Solution
• The smartphone is too far away: Move the devices closer
(P 210).
• Nearby devices are causing radio interference: Move the cam-
era and smartphone away from microwave ovens or cordless phones (P 210).
• The smartphone is connected to another device: The smartphone and camera can connect to only one device at a
time. End the connection and try again (P 210).
• There are several smartphones in the vicinity: Try connecting
Can not upload images. again. The presence of multiple smartphones can make
connection difficult (P 210).
• The current image is a movie or was created on another device and can not be uploaded to a smartphone
(P 210).
Select ON for D CONNECTION SETTING > WIRELESS
SETTING > RESIZE IMAGE FOR SMARTPHONE H.
Smartphone will not
Selecting OFF increases upload times for larger images; in
display pictures.
addition, some phones may not display images over a certain size (P 172).
Technical Notes
12
237
Troubleshooting
Miscellaneous
Problem
Solution
• Temporary camera malfunction: Remove and reinsert the
battery (P 30).
• The battery is exhausted: Charge the battery or insert a
fully-charged spare battery (P 27).
• The camera is connected to a wireless LAN: End the con-
The camera is unresponsive. nection.
• The controls are locked: Press and hold the MENU/OK button to unlock the controls (P 5).
• Tethered shooting is in progress: Camera controls can
not be used while tethered shooting is in progress.
Choose a different operating mode (P 174).
The camera does not func- Remove and reinsert the battery (P 30). If the
problem persists, contact your FUJIFILM dealer.
tion as expected.
No sound.
Adjust the volume (P 151).
The EVF is not correctly attached: Slide the EVF on until it
The EVF does not turn on.
clicks into place (P 11).
Technical Notes
12
238
Warning Messages and Displays
The following warnings appear in the display.
Warning
Description
Low battery. Charge the battery or insert a fully-charged
i (red)
spare battery.
Battery exhausted. Charge the battery or insert a fulj (blinks red)
ly-charged spare battery.
The camera can not focus. Use focus lock to focus on ans (displayed in red with
other subject at the same distance, then recompose the
red focus frame)
picture.
The subject is too bright or too dark and the picture will be
Aperture or shutter
over- or under-exposed. Use the flash for additional lightspeed displayed in red
ing when taking photographs of poorly-lit subject.
FOCUS ERROR
LENS CONTROL ERROR Camera malfunction. Turn the camera off and then on
TURN OFF THE CAMERA again. If the message persists, contact a FUJIFILM dealer.
AND TURN ON AGAIN
The shutter can only be released when a memory card is
NO CARD
inserted. Insert a memory card.
• The memory card is not formatted or the memory card has been
formatted in a computer or other device: Format the memory
card using D USER SETTING > FORMAT.
CARD NOT INITIALIZED • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated,
format the card. If the message persists, replace the card.
• Camera malfunction: Contact a FUJIFILM dealer.
Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera on.
LENS ERROR
If the problem persists, contact a FUJIFILM dealer.
Technical Notes
12
239
Warning
Description
• The memory card is not formatted for use in the camera: Format the card.
• The memory card contacts require cleaning or the memory card
CARD ERROR
PROTECTED CARD
BUSY
b MEMORY FULL
WRITE ERROR
FRAME NO. FULL
Technical Notes
12
240
is damaged: Clean the contacts with a soft, dry cloth. If the
message is repeated, format the card. If the message persists, replace the card.
• Incompatible memory card: Use a compatible card.
• Camera malfunction: Contact a FUJIFILM dealer.
The memory card is locked. Unlock the card.
The memory card is incorrectly formatted. Use the camera
to format the card.
The memory card is full and pictures can not be recorded.
Delete pictures or insert a memory card with more free
space.
• Memory card error or connection error: Reinsert the card or
turn the camera off and then on again. If the message
persists, contact a FUJIFILM dealer.
• Not enough memory remaining to record additional pictures:
Delete pictures or insert a memory card with more free
space.
• The memory card is not formatted: Format the memory card.
The camera has run out of frame numbers (current frame
number is 999-9999). Format the memory card and select
RENEW for D SAVE DATA SETTING > FRAME NO..
Take a picture to reset frame numbering to 100-0001, then
select CONTINUOUS for FRAME NO..
Warning Messages and Displays
Warning
Description
• The file is corrupt or was not created with the camera: The file
can not be viewed.
READ ERROR
• The memory card contacts require cleaning: Clean the con-
tacts with a soft, dry cloth. If the message is repeated,
format the card. If the message persists, replace the card.
• Camera malfunction: Contact a FUJIFILM dealer.
An attempt was made to delete or rotate to a protected picPROTECTED FRAME
ture. Remove protection and try again.
The picture is damaged or was not created with the camera.
CAN NOT CROP
Print orders can contain no more than 999 pictures. Copy
any additional pictures you wish to print to another memoDPOF FILE ERROR
ry card and create a second print order.
The selected picture can not be rotated.
CAN NOT ROTATE
Movies can not be rotated.
F CAN NOT ROTATE
The picture can not be printed using DPOF.
CAN NOT SET DPOF
F CAN NOT SET DPOF Movies can not be printed using DPOF.
F CANNOT EXECUTE Red-eye removal can not be applied to movies.
Red-eye removal can not be applied to pictures created
m CANNOT EXECUTE with other devices.
Turn the camera off and wait for it to cool. Mottling may
p (yellow)
increase in pictures taken when this warning is displayed.
Turn the camera off and wait for it to cool. While this warning is displayed, movies can not be recorded, mottling may
p (red)
increase, and performance, including frame advance rate
and display quality, may drop.
Technical Notes
12
241
Memory Card Capacity
The following table shows the recording time or number
of pictures available at different image sizes. All figures are
approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be
stored. The number of exposures or length remaining may
not diminish at an even rate.
Capacity
Photos
Movies *
T
O 4∶3
RAW (UNCOMPRESSED)
RAW (LOSSLESS COMPRESSED)
i1080/29.97P, 25P, 24P, 23.98P
8 GB
16 GB
SUPER
SUPER
FINE FINE NORMAL FINE FINE NORMAL
254
381
607
524
785
1253
66
127
137
265
26 minutes
54 minutes
51 minutes
105 minutes
h720/29.97P, 25P, 24P, 23.98P
* Use a UHS speed class 1 card or better. Individual movies can not exceed 30 minutes in length.
O Although movie recording will continue without interruption when the file
size reaches 4 GB, subsequent footage will be recorded to a separate file
which must be viewed separately.
Technical Notes
12
242
Specifications
System
Model
Product Number
Effective pixels
Image sensor
Storage media
Memory card slots
File system
243
Technical Notes
FUJIFILM GFX 50S
FF160005
Approx. 51.4 million
43.8 mm × 32.9 mm Bayer array with primary color filter
FUJIFILM-recommended SD/SDHC/SDXC memory cards
Two SD memory card slots (UHS-II compliant)
Compliant with Design Rule for Camera File System (DCF),
Exif 2.3, and Digital Print Order Format (DPOF)
File format
• Still pictures: Exif 2.3 JPEG (compressed); RAW (original RAF
format, uncompressed or compressed using a lossless algorithm; special purpose software required); RAW+JPEG available; TIFF (RGB)
• Movies: H.264 standard with stereo sound (MOV)
• Audio (voice memos): Stereo sound (WAV)
Image size
O 4∶3 (8256 × 6192)
Q 4∶3 (4000 × 3000)
O 3∶2 (8256 × 5504)
Q 3∶2 (4000 × 2664)
O 16∶9 (8256 × 4640)
Q 16∶9 (4000 × 2248)
O 1∶1 (6192 × 6192)
Q 1∶1 (2992 × 2992)
O 65∶24 (8256 × 3048)
Q 65∶24 (4000 × 1480)
O 5∶4 (7744 × 6192)
Q 5∶4 (3744 × 3000)
O 7∶6 (7232 × 6192)
Q 7∶6 (3504 × 3000)
RAW (8256 × 6192)
TIFF (8256 × 6192)
Lens mount
FUJIFILM G mount
Sensitivity
• Still pictures: Standard output sensitivity equivalent to ISO
100 – 12800 in increments of ⁄ EV; AUTO; extended output
sensitivity equivalent to ISO 50, 25600, 51200, or 102400
• Movies: Standard output sensitivity equivalent to ISO 200–6400
in increments of ⁄ EV
Metering
256-segment through-the-lens (TTL) metering; MULTI, SPOT,
AVERAGE, CENTER WEIGHTED
Exposure control
Programmed AE (with program shift); shutter-priority AE; aperture-priority AE; manual exposure
Exposure compensation • Still pictures: −5 EV – +5 EV in increments of ⁄ EV
• Movies: −2 EV–+2 EV in increments of ⁄ EV
12
System
Shutter speed
Mode P
MECHANICAL
SHUTTER
4 s to ¼ s
E-FRONT CURTAIN
SHUTTER
ELECTRONIC
SHUTTER
MECHANICAL +
4 s to ⁄ s
ELECTRONIC
E-FRONT CURTAIN +
ELECTRONIC
Continuous
Other modes
Time
Bulb
60 min. to
¼ s
60 min. to
¼ s
Max. 60 min.
60 min. to
⁄ s
60 min. to
⁄ s
Max. 60 min.
• Available frame advance rates (JPEG): 3.0 fps
• Approximate maximum number of shots per burst: 25
O The frame rate varies with shooting conditions and
the number of images recorded. In addition, the
frame rate and number of frames per burst may
vary depending on the type of memory card used.
Focus
• Mode: Single or continuous AF; manual focus with focus ring
• Focus-area selection: SINGLE POINT, ZONE, WIDE/TRACKING
• Autofocus system: TTL contrast-detect
White balance
Custom 1, Custom 2, Custom 3, color temperature selection,
auto, direct sunlight, shade, daylight fluorescent, warm white
fluorescent, cool white fluorescent, incandescent, underwater
Off, 2 sec., 10 sec.
• MODE: TTL MODE (FLASH AUTO, STANDARD, SLOW SYNC.),
MANUAL, MULTI, OFF
• SYNC. MODE: 1ST CURTAIN, 2ND CURTAIN, AUTO FP(HSS)
• RED EYE REMOVAL: e FLASH+REMOVAL, L FLASH,
d REMOVAL, OFF
Accessory shoe with TTL contacts; supports sync speeds as
fast as ⁄ s
X contact; supports sync speeds as fast as ⁄ s
Provided
Self-timer
Flash mode
Technical Notes
Hot shoe
Sync contact
Sync terminal
12
244
Specifications
System
Viewfinder
LCD monitor
EVF-GFX1 interchangeable electronic viewfinder (supplied)
• Rear monitor: 3.2-in/8.1 cm, 2360k-dot color LCD touch
screen with 3-way tilt
• Shoulder monitor: 1.28-in/3.25 cm, 128 × 128-dot memory
LCD monitor
h 720/29.97P
Movies (with stereo i 1080/29.97P
i 1080/25P
h 720/25P
sound)
i 1080/24P
h 720/24P
i 1080/23.98P
h 720/23.98P
Input/output terminals
Microphone connector ⌀3.5 mm mini-stereo jack
Headphone
⌀3.5 mm mini-stereo jack
Digital input/output USB3.0 High-Speed; Micro USB connector (Micro-B)
HDMI output
HDMI Micro connector (type D)
Remote release
⌀2.5 mm 3-pole mini jack
connector
DC IN
Provided
Technical Notes
12
245
Power supply/other
Power supply
Battery life
• NP-T125 rechargeable battery (supplied with camera)
• AC-15V AC adapter (available separately)
• Battery type: NP-T125
• Photographs: The number of frames varies with the option
selected for AUTO POWER SAVE:
Camera battery alone
AUTO POWER SAVE
LCD
ON
Approx. 400
OFF
Approx. 340
EVF
Approx. 400
Approx. 340
Technical Notes
With battery grip
AUTO POWER SAVE
LCD
EVF
ON
Approx. 800
Approx. 800
OFF
Approx. 660
Approx. 660
• Movies: The length of footage that can be recorded varies
with the movie mode:
Continuance
Actual Battery life of
Battery life of movie
Mode
movie capture
capture
i
Approx. 145 minutes
Approx. 70 minutes
CIPA standard, measured in mode P, using fully charged battery (NP-T125), GF63mmF2.8 R WR lens, and SD memory card.
Note: Battery life varies with battery charge level and will decline at low temperatures.
Camera size
147.5 mm × 94.2 mm × 91.4 mm (41.6 mm excluding projections,
(W × H × D)
measured at thinnest part)/5.81 in. × 3.71 in. × 3.60 in. (1.64 in.)
Camera weight
Approx. 740 g/26.1 oz., excluding battery, accessories, and
memory card
Shooting weight Approx. 825 g/29.1 oz., including battery and memory card
Operating conditions • Temperature: −10 °C to +40 °C/+14 °F to +104 °F (+5 °C to
+40 °C/41 °F to 104 °F when battery is charging)
• Humidity: 10% to 80% (no condensation)
12
246
Specifications
Wireless transmitter
Standards
IEEE 802.11b/g/n (standard wireless protocol)
Operating frequency 2,412 MHz–2,462 MHz (11 channels)
Access protocols
Infrastructure
EVF-GFX1 interchangeable electronic viewfinder
Type
OLED
Size
0.5-in/1.3 cm
Pixel count
Approximately 3.69 million dots
Magnification
0.85× with 50 mm lens (35 mm format) at infinity and diopter set to −1.0 m−1
Diagonal angle of Approximately 40° (horizontal angle of view approximately 33°)
view
Diopter adjustment −4 to +2 m−1
Eye point
Approximately 23 mm
Dimensions
53.6 mm × 36.4 mm × 80.1 mm/2.11 in. × 1.43 in. × 3.15 in.
(W × H × D)
Weight
Approx. 95 g/3.35 oz.
NP-T125 rechargeable battery
Nominal voltage
10.8 V
Nominal capacity
1250 mAh
Operating
−10 °C to +40 °C/+14 °F to +104 °F
temperature
Dimensions
36.0 mm × 54.4 mm × 26.0 mm/1.4 in. × 2.1 in. × 1.0 in.
(W × H × D)
Weight
Approx. 81 g/2.9 oz.
Technical Notes
12
247
Specifications
BC-T125 battery charger
Rated input
100 V – 240 V AC, 50/60 Hz
Input capacity
23 –31 VA
Rated output
12.6 V DC, 800 mA
Supported batteries NP-T125 rechargeable batteries
Charging time
Approx. 140 minutes (+25 °C/+77 °F)
Operating
+5 °C to +40 °C/+41 °F to +104 °F
temperature
Dimensions
71.4 mm × 97.0 mm × 34.2 mm/2.8 in. × 3.8 in. × 1.4 in.,
excluding projections
(W × H × D)
Weight
Approx. 120 g/4.2 oz.
Weight and dimensions vary with the country or region of sale. Labels, menus,
and other displays may differ from those on the actual camera.
O Specifications and performance are subject to change without notice.
FUJIFILM will not be held liable for any errors this manual may contain.
The appearance of the product may differ from that described in this
manual.
Technical Notes
12
248
MEMO
249
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising