EPICON STAND_UserManual_B.indd - D

EPICON STAND_UserManual_B.indd - D
Item No. 951045-0-0B
DALI EPICON STAND
MANUAL
DALI Denmark +45 9672 1155
www.dali-speakers.com
UK
TABLE 1
Item
FIGURE 1
Pcs.
DE
DK
Place your speaker carefully on top of the DALI EPICON STAND, and connect speaker and
amplifier/receiver.
WARNING: When attaching the speaker to the stand, be careful not to damage the speaker
drivers, by pressing the front grille.
1
FIGURE 4
FIGURE 5
Use the enclosed 3 screws to fix the DALI
EPICON 2 or DALI EPICON VOKAL to the stand.
Place the DALI EPICON STAND upright, and
insert your loudspeaker cable into the hole at
the back of the stand. Run the cable through
the stand, and pull it from underneath the base.
4
3
1
DA
LI E
PIC
MA ON ST
NU
AN
AL
D
Package contents
Congratulations with your new DALI EPICON STAND.
Unpack all the parts and make sure that all parts are present (see table 1). Be careful not to
damage the parts during handling. Keep the packaging materials should your stand need to be
relocated or serviced.
FIGURE 2
FIGURE 3
Position your DALI EPICON STAND in the desired location on the floor, and make sure that it stands
steadily without rocking.
Note: In general DALI speakers are constructed from our Wide Dispersion principle meaning that
they should not be toed in, but positioned parallel to the rear wall.
Cleaning
Do not use agents containing alcohol when cleaning your stands, use normal mild household
cleaning agents on a well wrung cloth.
Enjoy your new DALI EPICON STAND.
The spikes included should be screwed into the
four threaded holes in the base of each stand.
Make sure that the spikes sit tightly.
Using spikes is an ideal solution when
your DALI EPICON STAND is to be placed
on a carpet.
2
WARNING: Spikes may damage the floor!
The spikes can be fitted with the floor
protection pads.
Alternatively, if the stand is to be placed on a
surface that can be damaged by spikes – e.g.
a wooden floor – we recommend that you use
the premounted rubber bumpers instead of
spikes.
TABLE 2 - EPICON STAND TECHNICAL SPECIFICATIONS
EPICON STAND
Dimensions (Without spikes) (H x W x D) [mm]
531 x 275 x 401
Dimensions (H x W x D) [inches]
20.91 x 10.83 x 15.79
Weight [kg/lb]
Accessories
10.4/22.9
DALI SPIKE SET, Manual, 3 x M6 screw
All technical specifications are subject to change without notice.
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising