SK All-In-One Series Mega-pixel Pan/tilt IP Network Camera

SK All-In-One Series Mega-pixel Pan/tilt IP Network Camera
SK All-In-One Series
Mega-pixel Pan/tilt
IP Network Camera
Plug&Play H.264 wireless IP cameras
View on iPhone/iPad and Android
The IP Camera is designed for all day video surveillance on your iPhone/iPad
and Android mobiles/pads. The setup is truly 1-2-3 :
1. Connect the camera to the network
2. Download the app into your iPhone/iPad or Android
3. View video by the camera ID/password
The push notification is supported, so that you will get the notification from your
iPhone/iPad and Android once there is any events detected through the PIR body
sensor or sound detector on the camera, even when your mobile is on sleep mode.
The pan/tilt functions allow the mobile user to pan./tilt the camera through a
finger move on the mobile screen. You could monitor the whole room with a single
camera.
The SD card recording is supported, and you could playback the recorded video
on your iPhone/iPad and Android. You could also do the SD card recording only when
there is PIR or sound detection to save the SD card storage size. The PIR and sound
detected recording has a 5 seconds pre-recording, so that you will always catch the
critical moment.
The NAS and cloud storage is supported. You can record the video files into any
normal NAS devices or to your Dropbox account. And you can playback those
recorded video files remotely on your mobile devices or computers.
For day & night usage, there are two video sensors/lens on the camera, one for
day and one for night. The day lens and night lens focus are separately tuned for day
light and Infra Red light for best video quality. No ICR, no mechanical problem.
Two-way audio is supported. You can monitor the synchronized video/audio and
talk to or warn the people around the camera from your iPhone/iPad and Android once
you got the push notification. There is a built-in speaker and a speaker jack is
provided so that you could connect any high power speaker to the camera for your
needs.
The WPS(WiFi Protected Setup) is supported. You could set up the WiFi
connection of the camera with the router by clicking the WPS button on the camera
and on the router at the same time. No more complicated WiFi configuration.
An infrared thermometer is provided. You could monitor the temperature of the
environment of the camera. And you could setup the camera to trigger alarm when the
environment temperature is out of a specified range.
The IP camera is ideal for securing small businesses, home offices and
residences. The IP Camera is a perfect replacement of the alarm system and baby
monitor in your house and shop. .
Features
 Plug & play by ID/password, no IP address or DNS settings.
 H.264 video compression




















Mega-pixel for up to 1280x800 resolution at 30 fps.
Pan/tilt control.
Two sensors/lens for day and night separately.
PIR body detection, effective distance – 7 meters.
Two way audio.
Infrared thermometer and temperature alarm control.
SD card video recording with 5 seconds of pre-recording..
802.11 n wireless with WEP and WPA/WPA2 security support.
WPS (WiFi Protected Setup) support.
Triple video streaming on PC, mobile and SD card recording.
Night mode control – support automatic, manual and scheduled
modes.
Connect up to 20 users simultaneously
Bundle with free video management software.
Push notification on iPhone/iPad and Android for PIR, temperature
and sound detection.
Email/ftp alarm message for PIR and sound detection.
Event scheduling.
Video recording on NAS device.
Cloud Storage on Dropbox.
Internal real time clock
Watchdog function to prevent system failure.
Specifications
Models
Mega-pixel with Pan/tilt
Power
DC 12V, 1A
Processors
Network interface
RISC CPU, hardware video processing and compression.
Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45
Wireless interface
IEEE 802.11n 90 - 150 Mbps
IEEE 802.11g 6 - 54 Mbps
IEEE 802.11b 1 - 11 Mbps
Transmit power: 14.5dBm typically @ 802.11g
17.5dBm typically @ 802.11b
Receiver sensitivity: 54Mbps: Typical -73dBm @ 10%
PER
11Mbps: Typical -86dBm @ 10%
PER
Antenna gain: 1.8 dBi
Pan/Tilt control
Image sensor
PIR sensor
Infrared thermometer
Light sensitivity
Lens
Buttons
Indicators
Pan viewing range 180° ( -90° ~ 90° )
Tilt viewing range 90° ( 0° ~ 90° )
RGB Mega 1/4 inch CMOS
Day and night separate sensors
Automatic exposure control, automatic white balance,
automatic gain control, automatic brightness control.
Effective distance – 7 meters
Infrared
Range: -40 ~ 115 °C, accuracy:+-0.5°C
Field of view : 90 degree
0.2 Lux ( IR LED off )
0 Lux (with 10 meters IR LED on)
Automatically turn on the IR LED on low light
environment.
4.2 mm, F2.4, viewing angle: 62°, fixed iris.
focus range: 30 cm to infinity
Day and night separate lens
One reset button, to factory default settings
One WPS button for automatic WiFi setup
One LED for Internet connection status indication
Video compression
One LED for Ethernet connection indication
One LED for SD card recording indication
H.264, baseline profile level 3.1
Video streaming
Separate frame rate/resolution/bandwidth settings
for PC and mobile.
Video settings
Resolution: (WXGA)1280x800, 1024x768, VGA(640x480),
QVGA(320x240)
Bandwidth : 64k, 128k, 256k, 512k, 768k, 1M, 1.2M, 1.5M, 2M, 3M
bps
Frame rate : 1~5, 10, 15, 20, 25, 30 fps
Audio
Security
Installation,
management and
maintenance
Web browsing
Built-in microphone for audio monitoring
Built-in 0.5W speaker for alarm and half-duplex two-way
audio.
Speaker jack for external speaker
Audio compression: G.711
Web management username/password protection
Video display ID/password protection
WiFi WEP and WPA/WPA2 security mode
Plug & play by ID/password.
Video management software-CamView for video access
and multi-camera management
Firmware upgrades via FTP
Built-in web server for standard web browser access
Video display on IE browser
Video snapshot on any browser
Supported protocols
IPv4, HTTP, TCP, ICMP, RTSP, RTP, UDP, RTCP,
SMTP, SNTP, FTP, DHCP, ARP, DNS, PPPoE, etc.
Accessories (included)
Video management
Power adaptor, RJ45 Ethernet cable, quick installation
guide, CD with installation software and User’s Manual,
ID/Password card.
Surveillance software for viewing and archiving up to 36
Alarm and event
cameras
Up to 20 simultaneous unicast users
(depends on video settings)
Events triggered by PIR and sound detection
management
Email/ftp alarm message
software
Users
Push notification on iPhone/iPad and Android devices.
Dimensions (HxWxD)
124 x 91 x 100 mm,
and weight
Approvals
350 g, camera body only
EMC - CE, FCC Part 15 Subpart B Class B
Wireless RF - CE, FCC Part 15 Subpart C
Power supply: CE, FCC, UL, EN 60950
Operating conditions
0-50 °C
Humidity 20 – 80% RH (non-condensing)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising