Stereo Audio Extender CAT5 Analog Balun 3.5mm RJ45 Remote

Stereo Audio Extender CAT5 Analog Balun 3.5mm RJ45 Remote
3.5mm Stereo Audio Extender via CAT5 up to 300 Feet
XTENDEX®
Extend analog stereo audio speakers up to 300 feet away from an audio source.
„„
„„
„„
„„
Transmits an analog stereo audio signal over one CAT5/6/7 cable.
Transmitter and receiver baluns are interchangeable.
No power supply is necessary.
Supports Plug-n-Play specification.
Specifications
Local & Remote Unit
„„
„„
„„
One male 3.5mm TRS stereo audio plug for connecting to a source or
speakers/receiver.
One female RJ45 connector for sending/receiving analog stereo audio.
Bandwidth: 10Hz to 50kHz ±3dB
Dimensions
„„
Local and remote unit WxDxH: 0.91x1.38x0.44 in (23x35x24 mm)
with 4-inch (101-mm) male 3.5mm stereo audio cable attached.
Regulatory Approvals
„„
TAA compliant
XTENDEX® ST-C5SA-LC
*The transmitter looks the same as the receiver
• No power supply
• Compact size
The XTENDEX® 3.5mm Stereo Audio Extender transmits analog stereo
audio signals up to 300 feet using single CAT5e/6/7 cable. Each extender
consists of two interchangeable units that can be connected to a 3.5mm
stereo audio source and 3.5mm stereo audio speakers or receiver.
Warranty
„„
Two years.
Cables
„„
Use CAT5e/6/7 straight through cable for TIA/EIA-568B wiring
terminated with standard RJ45 connectors (not included).
Configuration and Cable Illustrations
3.5mm gender
changer
(not included)
ST-C5SA-LC
Transmitter
CAT5e/6/7 Cable
(Extends up to 300 feet)
ST-C5SA-LC
Receiver
PC
Speakers
PC
Audio Source
R
NETWORK
TECHNOLOGIES
INCORPORATED
1.800.RGB.TECH (800.742.8324)
To l l F r e e : U S & C a n a d a
330.562.7070
International calls
© 2017 NTI. All rights reserved.
330.562.1999
Worldwide fax
sales@ntigo.com
www.networktechinc.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising