From Midrange System Wiring Mid
SPECIFICATIONS
FEATURES
R152-S
PRIME Components
Built-In Tweeter Crossover
R1652-S
Nominal Diameter - inch (mm)
5.25 (133)
6.5 (165)
Description
2-Way Component 2-Way Component
Nominal Impedance (ohms)
4Ω
4Ω
Frequency Response (Hz)
58Hz-20kHz
55Hz-20kHz
Crossover Frequency (Hz)
12kHz
12kHz
6dB/octave Butterworth Crossover HP (High Pass)
HP (High Pass)
Voice Coil Diameter - inch (mm)
1.04 (26.5)
1.04 (26.5)
Fs - Free Air Resonance (Hz)
72Hz
59Hz
Qts
0.94
0.70
Vas - cu. ft. (Liter)
0.22 (5.8)
0.61 (15.5)
Xmax - inch (mm)
0.07 (1.7)
0.20 (5.2)
SPL (dB @ 1w/1m)
85dB
89dB
Power Handling-Watts (RMS / MAX) 40W / 80W
40W / 80W
Mounting Diameter-inch (mm)
4.76 (121)
5.71 (145)
Mounting Depth-inch (mm)
1.91 (48)
2.17 (55)
Includes Grille/Trim Ring
YES
YES
Grille/Trim Ring Diameter-inch (mm) 6.10 (154.6)
7.01 (178)
Grille/Trim Ring Height-inch (mm)
0.70 (17)
0.67 (17)
For the R152-S and R1652-S, a HP (High-Pass)
crossover is integrated into the tweeter housing.
This crossover allows for easy connection of the
full component system. Just jump wires from the
secondary terminals on the mid-range/woofer to
the tweeter terminals, see diagram below.
NOTE:
The tweeter has an integrated 6dB/octave HP
crossover.The mid-range/woofer has natural roll-off
characteristics exhibit great acoustic crossover filtering.
See figures on following pages.
R1T-S
1.0 (25)
Tweeter Kit
4Ω
2.5kHz-22kHz
12kHz
HP (High Pass)
0.55 (13.9)
2.6kHz
–
–
–
72.5dB
40W / 80W
1.83 (46) (Flush Mount)
0.76 (19) (Flush Mount)
YES
2.13 (54)
0.29 (7)
Specifications subject to change without notice.
WIRING
1.
Use illustration for proper connection.
2.
Be sure to maintain speaker polarity.
4.
Connect secondary tabs on Mid-Range/Woofer to Tweeter.
3.
System Wiring
Connect primary tabs on Mid-Range/Woofer to Amplifier.
NOTE:
The tweeter has an integrated 6dB/octave HP crossover.The
mid-range/woofer has natural roll-off characteristics exhibit
great acoustic crossover filtering.
Striped
Tweeter
(built-in 6dB
crossover)
From Midrange
Mid-Range
Woofer
From Amplifier
1/4”
(0.25”)
3
3/16”
(0.18”)
SPECIFICATIONS
3.83
(97mm)
6.10
(154mm)
3.83
(97mm)
0.70
(17mm)
0.67
(17mm)
6.10
(154mm)
0.70
(17mm)
0.67
(17mm)
Specifications subject to change without notice.
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising