MRD410B/F7
Owner’s Manual
Guide D’utilisation
Manual del Usuario
EN
MRD410B/F7
Home Theater System
FR
ES
INTRODUCTION
CONNECTIONS
PLAYBACK
Read your Owner’s Manual first for
quick tips that make using your
Magnavox product more enjoyable.
If you have read assistance,
you may access our online help at
http://www.funai-corp.com
or call
1-800-605-8610
while with your product
(and Model / Serial number)
FUNCTION SETUP
OTHERS
© 2010 Funai Electric Co., Ltd.
INTRODUCTION
Safety Instructions
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.
Model No.:
Serial No.:
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated“dangerous voltage”within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The important note is located on the rear or bottom of the
cabinet.
The symbol for CLASS ll (Double Insulation)
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the
authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
2
EN
INTRODUCTION
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Laser radiation when open. Do not stare into beam.
LOCATION: Inside, near the BD mechanism.
EN
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 7.8 inches (20cm) or more around this apparatus.
CONNECTIONS
To Avoid the Hazards of Electrical Shock and Fire
INTRODUCTION
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
• Do not handle the AC power cord with wet hands.
• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
FUNCTION SETUP
Dew Condensation Warning
PLAYBACK
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
* - Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
OTHERS
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) BD/DVD player, please contact our customer service center.
ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the
U.S. Department of Energy helping us all save money and protect the environment
through energy efficient products and practices.
EN
3
INTRODUCTION
Contents
INTRODUCTION
Safety Instructions ........................................................................2
Supplied Accessories ...................................................................5
Trademark Information ...............................................................5
Features ............................................................................................6
Symbols Used in this Manual ....................................................6
Front Panel.......................................................................................7
Rear Panel.........................................................................................7
Remote Control..............................................................................8
Front Panel Display.................................................................... 10
CONNECTIONS
Placing the Speakers ................................................................. 11
Connection to the TV ................................................................ 11
Connecting Speakers and Subwoofer ................................ 14
Connecting Audio from Cable Box/Recorder/Game
Console or TV .......................................................................... 15
Connecting Portable Media Player ...................................... 16
Connecting FM Radio Antenna ............................................. 16
Finding the Video Channel on Your TV .............................. 17
PLAYBACK
Information on Playback.......................................................... 18
How to Insert a Disc................................................................... 21
Reading the SD Memory Card ............................................... 21
Selecting the Media Mode ...................................................... 22
Playing Back a BD or a DVD .................................................... 23
Playing Back an Audio CD or a Disc with MP3 /
Windows Media™ Audio / JPEG Files ............................. 24
Kodak Picture CD........................................................................ 25
Fast Forward / Fast Reverse .................................................... 26
Slow Forward Playback ............................................................ 26
Step by Step Playback .............................................................. 26
Repeat Playback.......................................................................... 26
Program Playback ...................................................................... 27
Random Playback....................................................................... 28
Adjusting the Picture ................................................................ 28
PIP (BONUSVIEW) Setting ........................................................ 29
Camera Angle .............................................................................. 29
Search ............................................................................................. 30
Switching Subtitles .................................................................... 31
Switching Audio Soundtrack ................................................. 31
Setting the BD Audio Mode.................................................... 32
Volume Control........................................................................... 33
Selecting Surround Mode ....................................................... 33
Selecting Sound Effect Mode................................................. 33
Switching Active Source Mode ............................................. 34
Sleep Timer................................................................................... 34
Play from Portable Media Player........................................... 34
Radio Operations........................................................................ 35
4
FUNCTION SETUP
How to Navigate through the Setup Menus.....................36
List of Setup Menus....................................................................36
TV Aspect .......................................................................................42
Audio Output ...............................................................................42
Parental...........................................................................................44
HDMI CEC.......................................................................................44
One Touch Play......................................................................44
Standby ....................................................................................44
System Information..............................................................44
Software Update .........................................................................45
Current Version......................................................................45
Disc Update.............................................................................45
Initialize ..........................................................................................45
OTHERS
Troubleshooting..........................................................................46
Glossary ..........................................................................................47
Language Code List....................................................................49
Specifications ...............................................................................50
Maintenance.................................................................................51
LIMITED WARRANTY .................................................back cover
EN
INTRODUCTION
Supplied Accessories
Owner’s Manual
Quick Sta
rt Guide
EN
remote control × 1
(NC000UD)
AA (1.5V) battery × 2
video cable
FM wire
1 center, 2 front,
(WPZ1520TM002/ antenna
2 rear speakers and
WPZ152SCP003) (WX1E9000-081) 1 subwoofer
Owner’s Manual
(1VMN29273)
Quick Start Guide
(1VMN29274)
Trademark Information
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Windows Media and the Windows
logo are trademarks or registered
trademarks of Microsoft Corporation
in the United States and/or other
countries.
is trademark of Eastman Kodak Company.
FUNCTION SETUP
“Blu-ray Disc” and
Java and all other Java trademarks and logos
are trademarks or registered trademarks of
Sun Microsystems, Inc. in the United States
and/or other countries.
are trademarks.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent
of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly
prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein
without the obligation to notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without the
express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
5
OTHERS
© 2010 Funai Electric Co., Ltd.
EN
PLAYBACK
Manufactured under license under U.S. Patent #'s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and the Symbol are
registered trademarks, & DTS-HD, DTS-HD Advanced Digital
Out and the DTS logos are trademarks of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
“BONUSVIEW” is trademark of Blu-ray Disc Association.
CONNECTIONS
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks
of Dolby Laboratories.
INTRODUCTION
is a trademark of DVD Format/Logo Licensing
Corporation.
INTRODUCTION
Features
Blu-ray Disc
You can enjoy Blu-ray Disc which is capable of storing five
times more data than a conventional DVD.
BD-Java
With some BDs which support Java applications, you can
enjoy the interactive functions such as games or interactive
menus.
Full high-definition video playback
Watch movies in the highest picture quality available for your
HDTV. This unit offers full high-definition video playback up to
1080p resolution with multi-channel surround sound
capabilities for an amazing viewing experience. A highly
detailed picture and increased sharpness delivers a more trueto-life picture.
DVD upscaling for enhanced picture quality
Your current DVD will look even better than before thanks to
video upscaling. Upscaling will increase the resolution of
standard definition DVD to high definition up to 1080p over
an HDMI connection. The picture will be less jagged and more
realistic for a near high definition experience.
Enjoy your content on different kinds of media
Full backwards compatibility with DVD, CD and SD card
ensures that you can continue to enjoy your current audiovideo collection. Additionally, you can view JPEG digital
pictures or listen to MP3 or Windows Media™ Audio music
files.
Listen to rich multi-channel surround sound
Multi-channel surround sound, which recognizes real-to-life
sound and makes you feel like you are really there.
PIP (BONUSVIEW)
Some BD-videos have the PIP function which enables you to
display the secondary video in the primary video. You can call
up the secondary video by pressing [MODE] whenever the
scene contains the secondary video.
Pop-up menu
Some BD-video have pop-up menu which is a navigation
menu that can be called up and be operated on the TV screen
without interrupting playback. You can call up the pop-up
menu by pressing [POP MENU / MENU]. Contents in the
pop-up menu vary depending on the disc.
Playing back contents from an SD Memory Card
You can play back MP3 / WMA / JPEGs stored in an SD
Memory Card.
You can store picture-in-picture commentary, subtitles or
other extras for BD-ROM Profile 1 ver.1.1 files in an SD Memory
Card and play back with the BD-video.
Easy and Simple Connection to Your HDTV Via
HDMI
Connect this unit to your HDTV with one single HDMI (HighDefinition Multimedia Interface) cable. It is recommended to
use a High Speed HDMI Cable for better compatibility. The
high definition video output signal will be transferred to your
HDTV without conversion to analog signals, so you will get
excellent picture and sound quality, completely free from
noise.
Thanks to other multiple outputs, you can also easily connect
to your home theater system or amplifier.
HDMI Deep Color
Deep Color reduces posterization effect of the playback
image. Refer to “HDMI Deep Color” in “FUNCTION SETUP” on
page 37.
HDMI CEC (Consumer Electronics Control)
This unit supports HDMI CEC, which allows integrated system
control over HDMI and is part of the HDMI standard.
This function may not work properly on some devices.
HDMI 1080p24 output (BD only)
This unit is equipped with a feature which can provide
smooth movement during playback of film originated
material with the frame rate of 24 frames per second with
progressive scan. (Available only when the TV is connected by
an HDMI cable and compatible with 1080p24 frame input.)
Refer to “HDMI Video Resolution” in “FUNCTION SETUP” on
page 37.
Copyright protection system
To play back the digital video images of a BD / DVD via an
HDMI connection, it is necessary that both the unit and the
TV (or an AV amplifier) support a copyright protection
system called HDCP (high-bandwidth digital content
protection system). HDCP is copy protection technology
that comprises data encryption and authentication of the
connected AV device. This unit supports HDCP. Please read
the operating instructions of your TV (or AV amplifier) for
more information.
Symbols Used in this Manual
To specify which media type each function is applicable to, we
put the following symbols at the beginning of each item to
operate.
Symbol
Description
Description refers to BD-video and BD-RE
(ver.2.1) / BD-R (ver.1.1/1.2/1.3) recorded in
BDMV format
Description refers to DVD-video
Description refers to audio CD / DTS-CD
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and SD Memory Card with MP3 files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and SD Memory Card with
Windows Media™ Audio files
Description refers to BD-RE/-R,DVD-RW/-R,
CD-RW/-R and SD Memory Card with JPEG files
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
6
EN
INTRODUCTION
Front Panel
1 2
3
4*
5
6
7
8 9* 10
EN
STANDBY/ON
VOLUME
OPEN/CLOSE
PLAY
STOP
SD CARD
SOURCE
MP3 LINE-IN
12
11
(*) The unit can also be turned on by pressing these buttons.
1.
4.
5.
6.
VOLUME K / L button
• Press to adjust the volume.
8. STOP C button
• Press to stop playback.
9. PLAY B button*
• Press to start or resume playback.
10. SOURCE button
• Press to switch the active source mode.
11. MP3 LINE-IN jack
• Use to connect your portable audio player with
3.5mm stereo audio cable.
12. SD CARD slot
• Insert an SD Memory Card and play back the
contents in it.
CONNECTIONS
3.
7.
INTRODUCTION
2.
Note
• This unit will be turned into the standby mode
automatically after 25 minutes of no action.
PLAYBACK
STANDBY/ON Q button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Press and hold for 10 seconds to shut down the unit.
• This button lights up in red when the unit is in
standby mode and turns off when the power is on.
STANDBY/ON indicator
• This indicator lights up in red when the power is in
the standby mode.
Disc tray
• Place a disc after opening the disc tray.
OPEN/CLOSE A button*
• Press to open or close the disc tray.
Infrared sensor window
• Receive signals from your remote control so that you
can control the unit from a distance.
Display
• Refer to “Front Panel Display” on page 10.
Rear Panel
1
2
3
AUDIO IN
AUX
5 6 7
FM
ANT
75Ω
FUNCTION SETUP
HDMI OUT
SPEAKERS(4Ω)
4
DIGITAL COMPONENT VIDEO OUT
AUDIO IN
Pr
Y
Pb
SUBFRONT
WOOFER CENTER
REAR
VIDEO OUT
FRONT
8
EN
6. DIGITAL AUDIO IN (Coaxial) jack
• Use to connect an other device with a digital audio
coaxial output jack with a digital audio coaxial cable.
7. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video
inputs with a component video cable.
8. VIDEO OUT jack
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with a video cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
7
OTHERS
1. AC power cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
2. 5.1ch Audio Out jacks (SPEAKERS (4Ω))
• Use to connect supplied 5.1ch speakers.
3. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
4. AUDIO IN (AUX) jacks
• Use to connect an other device with audio out jack
with an audio cable.
5. FM ANT 75Ω jack
• Use to connect the supplied FM wire antenna.
INTRODUCTION
Remote Control
9.
31
1
2
3
30*
29
28
10.
11.
12.
13.
4
5
6
27
7
26
8
25
9
24
10
23
11
12*
13
14
15
16
17
22
14.
15.
16.
21
20
19
18
17.
18.
19.
(*) The unit can also be turned on by pressing these buttons.
1. STANDBY/ON Q button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
2. DISPLAY button
• Press to display the on-screen display menu.
3. SUBTITLE button
• Press to display the subtitle menu.
4. Number buttons
• Press to enter the title, chapter, track or file number.
• Press to enter values in the input field.
5. SEARCH button
• Press to display the search menu.
6. RED / GREEN / BLUE / YELLOW button
• Press to select items on some BD menus.
• When file list / thumbnail list is shown, press to
switch between pages.
7. TOP MENU button
BD:
• Press to display the top menu.
DVD:
• Press to display the title menu.
8. K / L / s / B buttons
DISC:
• Press to select items or settings.
RADIO:
• Press up or down to tune the radio frequency.
• Press left or right to start auto search.
8
20.
21.
22.
23.
SETUP buttons
• Press to display the setup menu.
VOL. + / – button
• Press to adjust the volume.
E (reverse) button
• During playback, press to fast reverse the playback.
B (play) button*
• Press to start playback or resume playback.
H (skip) button
• During playback, press once to return to the
beginning of the current title, chapter or track.
• During playback, press twice to return to the
previous title, chapter or track.
• During the JPEG playback, press to return to the
previous file.
C (stop) button
• Press to stop playback.
F (pause) button
• Press to pause playback.
• When playback is in pause mode, press repeatedly
to forward the playback step by step.
AUDIO button
DISC:
• Press to select the audio channel (such as audio
languages).
RADIO:
• Press to switch between stereo and mono mode.
SURROUND button
• Press to select surround mode.
SOUND MODE button
• Press to select a sound effect mode.
MUTE button
• Press to mute the volume.
MODE button
• During BD or DVD playback, press to display the
setting for the picture adjustment.
• During BD playback, press to turn the picture-inpicture feature on or off (only applicable to BD-video
which supports the PIP function).
• During the JPEG playback, press to display menus for
changing the visual effect for switching the image or
changing the size of the image.
• In stop mode with BD inserted, press to display a
menu for setting the BD audio mode.
• In stop mode with audio CD or MP3 / WMA / JPEG
files inserted, press to display menus for program and
random playback.
G (skip) button
• During playback, press to skip to the next title,
chapter, track or file.
D (forward) button
• During playback, press to fast forward the playback.
• In pause mode, press to slow forward the playback.
SOURCE ⴐ / ⴑ button
• Press to switch the active source mode;
"Disc / SD", “Aux”, “Coaxial”, “MP3 Line-in” or “FM”.
EN
INTRODUCTION
2
Note
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the
following:
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc) batteries.
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that
are not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public rules that apply in your country or area.
(Refer to page 3.)
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
Using a Remote Control
1
2
SD CARD
16 feet
(5 m)
EN
VOLUME
OPEN/CLOSE
30˚
30˚
23 feet
(7 m)
STOP
PLAY
SOURCE
MP3 LINE-IN
16 feet
(5 m)
9
Line
Eith
Abo
Belo
OTHERS
STANDBY/ON
Make sure to match + and - on the batteries to the
marks indicated in the battery compartment.
FUNCTION SETUP
2 Insert batteries.
Remote Control Usage Guidelines:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7 m)
- Either side of the center: approx. 16 feet (5 m) within 30°
- Above: approx. 16 feet (5 m) within 15°
- Below: approx. 10 feet (3 m) within 30°
PLAYBACK
1 Open the cover.
EN
1
CONNECTIONS
Installing the Batteries in the Remote Control
Install AA (1.5V) battery × 2 matching the polarity
indicated inside battery compartment of the remote
control.
3 Close the cover.
INTRODUCTION
24. RETURN button
• Press to return to the previously displayed menu
screen.
25. OK button
• Press to confirm or select menu items.
26. POP MENU / MENU button
BD:
• Press to display the pop-up menu.
DVD:
• Press to display the disc menu.
27. CLEAR button
DISC:
• Press to clear the information once entered or to
cancel the programming for audio CD, etc.
RADIO:
• Press to erase the selected preset station.
28. ANGLE button
• Press to access various camera angles on the disc.
• Press to rotate the JPEG files clockwise by 90
degrees.
29. REPEAT button
• Press to toggle between various repeat modes.
30. OPEN/CLOSE A button*
• Press to open or close the disc tray.
31. SLEEP button
• Press to set the sleep timer.
INTRODUCTION
Front Panel Display
1
2
3
4
* Brightness of the display can be adjusted. Refer to “Panel Display” in “List of Setup Menus” on page 40.
1.
2.
3.
4.
Displays repeat icon. (Appears during repeat playback.)
Displays media mode icon (disc mode or SD card mode).
Displays playback status icon. Refer to table A below.
Displays source mode status (refer to table B below) or information such as title number, elapsed playing time,
repeat type, menu type, etc.
<Table A>
<Table B>
Playback
status icon
Mode
Playback is in progress
• When switching the source mode, the following will be
displayed.
Display
Mode
“Disc / SD” mode
Stop mode
“Aux” mode
Pause mode
Fast forward mode
Tuning radio station (in FM mode)
Fast reverse mode
Tuning radio station (in FM mode)
Slow forward mode
“Coaxial” mode
“MP3 Line-in” mode
“FM” mode
(Frequency of radio station will
be displayed.)
e.g.)
Disc is being played back.
Indicating the current title number and the elapsed time.
Current chapter is in chapter repeat mode during playback of disc.
Loading a disc and the unit is in Disc / SD card mode.
Dolby Digital audio is being played back during playback of disc.
DTS audio is being played back during playback of disc.
10
EN
CONNECTIONS
Placing the Speakers
Make the following connection to ensure an optimum sound experience.
EN
REAR
LEFT
FRON
T
LEFT
CENT
ER
FRON
T
RIGHT
INTRODUCTION
SUB
REAR
RIGHT
WOO
FER
1 Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45
CONNECTIONS
degrees from the listening position.
2 Place the center speaker above the TV or the main unit so that the center channel’s sound is localized.
3 Place the rear speakers at normal listening ear level facing each other.
4 Place the subwoofer at the corner of the room. Otherwise, keep it at least one meter away from the TV.
Note
FUNCTION SETUP
Connection to the TV
1
Choose the appropriate connection, then proceed to the corresponding
instruction (A, B or C) on the pages 12-13.
Best
(Supports up to 1080i, 1080p, 1080p/24 resolution.)
HDMI cable
HDMI IN
High
Definition
TV
Go To
A
No analog audio connection required.
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.
High Speed HDMI Cable (also known as HDMI category 2 cable) is recommended for better compatibility.
EN
11
OTHERS
Your TV
Video
Audio
PLAYBACK
• The placement diagram shown here is only a guideline that provides great system performance. You may find other
placement choices that are more suitable for your room layout that provide the sound experience you enjoy.
• To avoid magnetic interference, never position the front speakers too close to your TV.
• The rear speakers are labeled as REAR LEFT or REAR RIGHT.
• The front speakers are labeled as FRONT LEFT or FRONT RIGHT.
• For speaker setup, refer to “Speaker Setup” on pages 39-40.
CONNECTIONS
Better (Supports up to 1080i resolution.)
COMPONENT
VIDEO IN
Y
Your TV
Video
High
Definition
TV
PB/CB
Component video cable
Go To
PR/CR
B
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Basic (Supports only 480i resolution.)
Your TV
Standard
Definition
TV
VIDEO IN
Video
Video cable
Go To
C
• Connect this unit directly to the TV. If the video cables are connected to a VCR, pictures may be distorted due to the
copy right protection system.
Supplied cables used in this connection are as follows:
• Video cable x 1
2
Connect the cables by following the descriptions below.
HDMI Connection
Your TV
A
HDMI OUT
SPEAKERS(4Ω)
FM
ANT
75Ω
DIGITAL COMPONENT VIDEO OUT
AUDIO IN
Pr
Y
Pb
SUBFRONT
WOOFER CENTER
HDMI OUT
12
AUDIO IN
AUX
REAR
VIDEO OUT
FRONT
HDMI cable
HDMI IN
EN
CONNECTIONS
Component Video Connection
B
Your TV
HDMI OUT
AUDIO IN
AUX
DIGITAL COMPONENT VIDEO OUT
AUDIO IN
FM
ANT
75Ω
SPEAKERS(4Ω)
Pr
EN
Y
Pb
SUBFRONT
WOOFER CENTER
REAR
VIDEO OUT
FRONT
COMPONENT
VIDEO IN
Y
PB/CB
PR/CR
Component video cable
C
Your TV
HDMI OUT
SPEAKERS(4Ω)
AUDIO IN
AUX
FM
ANT
75Ω
INTRODUCTION
Standard Video Connection
DIGITAL COMPONENT VIDEO OUT
AUDIO IN
Pr
Y
Pb
REAR
FRONT
VIDEO OUT
Video cable
CONNECTIONS
SUBFRONT
WOOFER CENTER
VIDEO IN
HDMI Mode and Actual Output Signals
You can change the resolution of the video signal being output from the HDMI OUT jack in the setup menu.
For details, refer to “HDMI Video Resolution” on page 37.
EN
13
OTHERS
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• To output the audio signals from the HDMI OUT jack, set “Audio Output” to “HDMI Normal” or “HDMI LPCM” in the
setup menu. (refer to page 42.)
• The audio signals from the HDMI OUT jack (including the sampling frequency, the number of channels and bit
length) may be limited by the device that is connected.
• Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). While
connected to a device such as a projector, audio will not be output from the HDMI OUT jack.
• When this unit’s HDMI OUT jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an
HDMI-DVI converter cable, the signals are output in digital RGB.
FUNCTION SETUP
Note
PLAYBACK
Copyright protection system
To play back the digital video images of a BD-video or DVD-video via an HDMI connection, it is necessary that both the
player and the display device (or an AV receiver / amplifier) support a copyright protection system called HDCP (highbandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption
and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of
your display device (or AV receiver / amplifier) for more information.
CONNECTIONS
Connecting Speakers and Subwoofer
HDMI OUT
SPEAKERS(4Ω)
AUDIO IN
AUX
FM
ANT
75Ω
DIGITAL COMPONENT VIDEO OUT
AUDIO IN
Pr
Y
Pb
SUBFRONT
WOOFER CENTER
REAR
VIDEO OUT
FRONT
SPEAKERS(4Ω)
SUBFRONT
WOOFER CENTER
SUBWOOFER
FRONT CENTER
REAR
REAR RIGHT
FRONT
REAR LEFT
FRONT RIGHT
FRONT LEFT
1 Connect the speaker cables to the matching color sockets on the speakers.
2 Connect all the speakers and subwoofer to the matching sockets at the rear of the main unit.
Make sure that the colors of the cables and sockets are matched.
Note
• To prevent unwanted noise, never place the speakers too close to the main unit, subwoofer, AC power adapter, TV or
any other radiation sources.
14
EN
CONNECTIONS
Connecting Audio from Cable Box/Recorder/Game Console or TV
• This unit provides analog and digital audio connection. You can connect the audio output from an audio / video device
(e.g. DVD Recorder, VCR, Cable / Satellite Box, game console or TV) to this Blu-ray Disc Home Theater in order to enjoy
the multi-channel surround sound capabilities.
EN
Cable / Satellite Box
AUDIO IN
AUX
Audio cable
Your TV
L
AUDIO OUT
or
R
HDMI OUT
SPEAKERS(4Ω)
AUDIO IN
AUX
FM
ANT
75Ω
DIGITAL COMPONENT VIDEO OUT
AUDIO IN
Pr
Y
Pb
SUBFRONT
WOOFER CENTER
REAR
FRONT
VIDEO OUT
Digital audio coaxial cable
DIGITAL OUT
DVD Recorder / VCR
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
CONNECTIONS
• Use an audio cable (not supplied) to connect the AUDIO IN (AUX) jacks on the main unit to the AUDIO OUT jacks on the
connected device.
• Use a digital audio coaxial cable (not supplied) to connect the DIGITAL AUDIO IN (Coaxial) jack on the main unit to the
DIGITAL OUT (Coaxial) jack on the connected device.
INTRODUCTION
DIGITAL
AUDIO IN
Note
PLAYBACK
• To listen to the audio output from these connections, select “Speakers” in “Audio Output” (refer to page 42) and
change the active source mode to the connected input. (Refer to “Switching Active Source Mode” on page 34.)
FUNCTION SETUP
OTHERS
EN
15
CONNECTIONS
Connecting Portable Media Player
STANDBY/ON
VOLUME
OPEN/CLOSE
PLAY
STOP
SD CARD
SOURCE
MP3 LINE-IN
MP3 LINE-IN
MP3
Connect a 3.5mm stereo audio cable(not supplied) to the MP3 LINE-IN jack on this unit and the headphone jack
on your portable media player.
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Note
• To playback the audio from your portable media player, refer to “Play from Portable Media Player” on page 34.
Connecting FM Radio Antenna
FM
ANT
75
HDMI OUT
AUDIO IN
AUX
SPEAKERS(4Ω)
FM
ANT
75Ω
DIGITAL COMPONENT VIDEO OUT
AUDIO IN
Pr
Y
Pb
SUBFRONT
WOOFER CENTER
REAR
FRONT
VIDEO OUT
1 Connect the supplied FM wire antenna to the FM ANT 75Ω jack on this unit.
2 Extend the FM antenna and fix its ends to the wall for optimum reception.
Note
• For better FM stereo reception, connect an external FM antenna (not supplied).
• Place the antenna away from your TV, VCR or other radiation source to prevent any unwanted interference.
• For FM radio playback, refer to “Radio Operations” on page 35.
16
EN
CONNECTIONS
After you have completed all the connections, you must find the correct video channel (external input channel) on your TV.
Finding the Video Channel on Your TV
1
2
3
After you have made all the necessary connections, press [STANDBY/ON Q] to turn
on the unit.
EN
Turn on your TV.
Press the button on the TV’s remote control that accesses the external input
channel. It may be labeled “SOURCE”, “AV” or “SELECT” (refer to your TV’s user
manual).
INTRODUCTION
CONNECTIONS
Note
• If the TV is connected by an HDMI cable, it may take a while for the opening picture to come up.
PLAYBACK
FUNCTION SETUP
OTHERS
EN
17
PLAYBACK
Information on Playback
Before you start playing back a disc, read the following information.
Playable Discs and Files
Note for SD Memory Cards
This unit is compatible to play back the following discs / files.
To play back a disc / file, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos.
Other disc types are not guaranteed to play back.
Playable discs
Logos
Blu-ray Disc
- BD-video (single / dual layer)
- BD-RE ver. 2.1 (single / dual layer)
(Recorded in BDMV format)
- BD-R ver. 1.1 / 1.2 / 1.3 (single / dual
layer) (Recorded in BDMV format)
(Unclosed discs may not be played
back.)
• This unit supports SD Memory Card with FAT12/
FAT16 file system, and SDHC Memory Card with FAT32
file system.
• This unit does not support NTFS file system.
• This unit may not read SD Memory Cards formatted
on a computer. If that is the case, please reformat the
SD Memory Cards in this unit and try again.
• This unit does not support miniSDHC and microSDHC
Memory Card.
• For miniSD Card and microSD Card, an adapter is
necessary.
miniSD Card
adapter
miniSD Card
microSD Card
adapter
microSD
Card
• Portions of this product are protected under
copyright law and are provided under license by
ARIS / SOLANA / 4C.
• Please keep the SD Memory Cards in their cases when
you are not using them.
• Do not try to open or modify the card.
• Do not touch the terminal surface with your fingers or
any metals.
• Do not attach additional labels or stickers to cards.
• Do not remove the label of the SD Memory Cards.
• This unit recognizes up to 8 characters of file name in
the SD Memory Card. Characters after 8th will not be
displayed.
DVD-video
DVD-RW
DVD-R
CD-DA (audio CD)
Unplayable Discs and Files
CD-RW
CD-R
Kodak Picture CD
-
DTS-CD
Playable files
MP3
Windows Media™ Audio
JPEG
Readable cards
Media
BD-RE/-R
DVD-RW/-R
CD-RW/-R
SD Memory Card (including SDHC)
miniSD Card
microSD Card
The following discs will not be played back in this unit.
• CD-ROM
• CD-I (compact disc-interactive)
• DVD-RAM
• VSD (video single disc)
• DVD-audio
• Video CD
• HD DVD
• SVCD
• Unfinalized disc
• BD-RE (ver.1.0)
• BD-RE (ver.2.1) (Recorded in BDAV format)
• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format)
• BD / DVD / CD / SD Memory Card contains DivX® files.
• BD / DVD hybrid disc (played back as a BD-video only)
• DVD-RW/-R recorded in non compatible recording
format.
• Super Audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density Super Audio CD
layer cannot be heard.
• Playability of dual discs are not guaranteed.
• This unit cannot play back the disc contents protected by
Windows Media™ Digital Rights Management (DRM).
Playable files / data
SD Memory Card (8 MB - 2 GB)
MP3, Windows Media™
SDHC Memory Card (4 GB - 8 GB) Audio, JPEG, picture-inpicture commentary,
miniSD Card (8 MB - 2 GB)
subtitles or other extras for
microSD Card (8 MB - 2 GB)
BD-ROM Profile 1 ver.1.1
18
EN
PLAYBACK
Color Systems
On-Screen Display
BD-video and DVD-video are recorded in different color
systems throughout the world. The most common color
system is NTSC (which is used primarily in the United
States and Canada).
This unit employs NTSC color system, so the disc you play
back must be recorded in the NTSC system. You cannot
play back the disc recorded in other color systems.
You can check information about the current disc by
pressing [DISPLAY].
To call the on-screen display menu, press [DISPLAY]
during playback. Every time you press [DISPLAY], the
information changes. Depending on the media, available
information varies.
EN
Region Codes
BD-video
off A Title / Chapter information
A Title information (elapsed time)
A Title information (remaining time)
A Decoding format information A off
INTRODUCTION
DVD-video
off A Chapter information (elapsed time)
A Chapter information (remaining time)
A Title information (elapsed time)
A Title information (remaining time)
A Decoding format information A off
Structure of Disc / SD Memory Card Contents
The contents of BD / DVD are generally divided into titles.
Titles may be further subdivided into chapters.
CONNECTIONS
This unit has been designed to play back
BD-video with region “A” and DVD-video
with region “1” or “ALL”. You cannot play
back BD-video or DVD-video that are
labeled for other regions. Look for the
symbols on the right on your BD-video or
DVD-video.
If these region symbols do not appear on
your BD-video or DVD-video, you cannot
play back the disc in this unit. The letter or
number inside the globe refers to region
of the world. A BD-video or DVD-video
labeled for a specific region can only be
played back in the unit with the same
region code.
Track information (elapsed time)
A Track information (remaining time)
A Disc information* (elapsed time)
A Disc information* (remaining time)
A Track information (elapsed time)
(* not available during program / random playback)
chapter 1
title 2
chapter 2 chapter 3
track 1
track 2
track 3
track 4
track 5
EN
file 2
off A File information A File name information A off
folder (group) 2
folder (group) 1
file 1
off (File information (elapsed time))
A File name information
A Tag information (title name)
A Tag information (artist name)
A off (File information (elapsed time))
OTHERS
Data discs or SD Memory Cards containing MP3 / WMA /
JPEG are divided into folders, and the folders are
subdivided into files.
MP3 / WMA / JPEG
off (File information (elapsed time))
A File name information
A off (File information (elapsed time))
FUNCTION SETUP
audio CD are divided into tracks.
audio CD
PLAYBACK
BD / DVD
title 1
chapter 1 chapter 2
file 3
file 4
file 5
19
PLAYBACK
Chapter information
Disc information
<Title / Chapter information for BD>
1
2
1
1/10
3
4
2
<Chapter information for DVD>
1
2
3
4
5
6
6
3/5
0 : 01 : 02
3/5
0 : 01 : 02
0 : 00: 51
T
Current track number / Total number of tracks
Elapsed time (or remaining time) of the current disc
1
File_name_001
1
Media icon and file name
: MP3 files
: WMA files
: JPEG file
Tag information
Title information
2
1 / 14
File name information
Current title number
Current chapter number / Total number of chapters
Current repeat setting (Only when repeat setting is
active)
(C: Chapter repeat, T: Title repeat)
Indicates that the multi camera angle images are
available on the scene
Current playback status
Elapsed time (or remaining time) of the current
chapter
1
2
T
1
2
1
5
<Title name information>
1
1
2
TITLE
Current title number / Total number of titles
Elapsed time (or remaining time) of the current title
<Artist name information>
Track / File information
1
2
3
4
20
2
1
2
3
1 / 14
0 : 00: 51
SD
4
G
Current track (file) number / Total number of track
(file)
Elapsed time (or remaining time) of the current
track / file
(except for JPEG files)
Indication of SD Memory Card playback
Current repeat setting
(Only when repeat setting is active)
(T: Track repeat, G: Group repeat,
A: All repeat)
ARTIST NAME
1
2
Title name based on tag information of current
Windows Media™ Audio file
Artist name based on tag information of current
Windows Media™ Audio file
Decoding format information
1
Dolby Digital
1
Decoding format
EN
PLAYBACK
2
How to Insert a Disc
1
2
Press [OPEN/CLOSE A] to open the
disc tray.
Use [K / L] to select “SD Card”,
then press [OK].
Media Select
EN
Disc
SD Card
Place the disc on the disc tray with its
label side facing up.
• Media filter screen will appear.
• When the SD Memory Card contains only
one type of file, skip to step 4.
3
Align the disc to the
disc tray guide.
Audio
Picture
Press [OPEN/CLOSE A] to close the
disc tray.
It may take a while to load the disc.
• If you press [OK] on the desired file,
playback will start.
If no disc is in operation, “Media Select” screen
will appear on the TV screen.
VOLUME
OPEN/CLOSE
SD CARD
STOP
MP3 LINE-IN
VOLUME
SD CARD
SD Memory Card
EN
PLAY
SOURCE
• The “Media Select” screen will disappear under the
conditions listed below:
- when the screen saver is activated.
- when [RETURN] is pressed.
- when the setup menu is called up.
• If the “Media Select” screen disappears before you
make the selection, refer to “Selecting the Media
Mode” on page 22.
• Do not remove the SD Memory Card or turn the unit
to the standby mode while the contents of the card
are in playback. It may result in malfunction or loss of
the card’s data.
• Do not delete the folders or files in the SD Memory
Card with your computer. This unit may not read SD
Memory Cards formatted on a computer.
• If a folder or file name includes one of the following
unrecognizable characters, the folder or file name
may not be displayed correctly.
- Unrecognizable characters : . , " = + [ ] ; / \ : | ¥
• The system can recognize up to 999 folders / 9,999
files for SD Memory Card.
• The 10th and deeper hierarchies cannot be displayed
for SD Memory Card.
• For an SD Memory Card, extensions other than listed
below cannot be recognized.
- MP3 : “.mp3”
- WMA : “.wma”
- JPEG : “.jpg”
21
OTHERS
Insert an SD Memory Card, with the
label side facing up, into the SD
CARD slot until it clicks.
Note
FUNCTION SETUP
You can play back the MP3 / WMA / JPEG files in an SD
Memory Card.
With the SD Memory Card, you can also enjoy the special
additional contents for BD-ROM Profile 1 ver.1.1 which can
be downloaded from the Internet. You can store the
contents on an SD Memory Card via computer and play
them back with the BD-video. For more information about
the special additional contents, please refer to the
instruction book that came with the disc.
PLAYBACK
To remove the SD Memory Card:
In stop mode, gently push in the SD Memory
Card, then pull it out slowly.
Reading the SD Memory Card
STANDBY/ON
Use [K / L] to select a desired track,
folder or file, then press [OK].
Use [s / B] to go back and forward
between the hierarchies.
CONNECTIONS
4
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray.
Remove the disc.
Press [OPEN/CLOSE A] to close the disc tray.
1
INTRODUCTION
Please select the media to play back.
• Make sure the disc is compatible with this unit.
(Refer to page 18 for the list of compatible discs.)
3
Select the type of the file you want
to play back in the media filter
screen. Then press [OK] to display
the file list.
PLAYBACK
Selecting the Media Mode
For the playback media to be read by this unit, the correct media mode should be selected. You can switch the media
mode by following the steps below. “Media Select” is available only when an SD Memory Card is inserted and this
unit is in Disc / SD card mode.
1
2
In stop mode, press [SETUP].
Use [K / L] to select
[OK] .
, then press
Quick
Media Select
Disc
Audio Output
Speakers
HDMI Video Resolution Auto
3
Component Output
480i
Player Menu
English
Use [K / L] to select “Media Select”.
Quick
Media Select
Disc
Audio Output
Speakers
HDMI Video Resolution Auto
4
5
Component Output
480i
Player Menu
English
Press [OK] repeatedly to select the
desired media.
Press [SETUP] to exit.
• Selected media mode is now activated.
Note
• Even if you set the media mode to “SD Card”, the
setting will be switched to “Disc” in following cases :
- If you turn the unit into the standby mode.
- If you change the active source mode to “Aux”,
“Coaxial”, “MP3 Line-in” or “FM” mode.
22
EN
PLAYBACK
Playing Back a BD or a DVD
efore
ou
egin
1
2
3
4
Press [STANDBY/ON Q].
EN
Turn on the TV and select the
appropriate input on the TV to
which the unit is connected.
Insert a disc (refer to “How to Insert a
Disc” on page 21 ).
Playback may start automatically.
INTRODUCTION
If not, press [B (play)].
Some discs may show a title or a disc menu.
In such case, refer to “Using the Title / Disc /
Pop-up Menu” on page 24.
Resume-On-Stop mode
If a playback is in Resume-On-Stop mode, when you press
[B (play)] next time, the playback will start from the point
where it has been stopped.
•
may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this
unit.
• During the playback of 2-layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you play back BDvideo and DVD-video with disc menu. Refer to the
manual accompanying the disc for details.
• Set “Still Mode” setting to “Field” in “Video” menu if
pictures in the pause mode are blurred. Refer to “Still
Mode” on page 38.
EN
23
OTHERS
Note
FUNCTION SETUP
• Resume playback may not be available for the BD that
supports Java applications (BD-Java).
• In the “Disc” mode, the resume information will be
cleared when;
- [C (stop)] is pressed while in the Resume-On-Stop
mode.
- the parental level is changed.
- the disc tray is opened.
• In the “SD Card” mode, the resume information will be
cleared when;
- [C (stop)] is pressed while in the Resume-On-Stop
mode.
- the SD Memory Card is removed.
- the unit is turned into the standby mode.
PLAYBACK
Note
CONNECTIONS
To pause playback:
Press [F (pause)].
To return to the normal playback:
Press [B (play)].
To stop playback:
Press [C (stop)].
Playback will be in Resume-On-Stop mode.
PLAYBACK
Using the Title / Disc / Pop-up Menu
Many of BD-video and DVD-video discs contain title menu
(BD-video / DVD-video), disc menu (DVD-video) or pop-up
menu (BD-video) which guides you through the available
functions in the disc. The contents of the menus may differ
depending on the discs.
Title menu (BD-video / DVD-video)
1 Press [TOP MENU].
2 Use [K / L / s / B] to select an item, then press
3
[OK].
Press [TOP MENU] to exit.
Disc menu (DVD-video)
1 Press [POP MENU / MENU].
2 Use [K / L / s / B] to select an item, then press
3
[OK].
Press [POP MENU / MENU] to exit.
Playing Back an Audio CD or a Disc
with MP3 / Windows Media™ Audio /
JPEG Files
Before you begin, make sure the correct media mode is
selected. Refer to “Selecting the Media Mode” on page 22.
1
Insert an audio CD or a disc with
MP3, WMA or JPEG files.
2
Select the type of the file you want
to play back in the media filter
screen. Then press [OK] to display
the file list.
3
Use [K / L] to select a desired track,
folder or file, then press [OK].
Use [s / B] to go back and forward
between the hierarchies (only for
MP3 / WMA / JPEG files).
Pop-up menu (BD-video)
• Media filter screen will appear.
• For audio CD and a disc contains only one
type of file, skip to step 3.
• If you press [OK] on the desired file, playback
will start.
This is a special feature available for some BD-videos.
When you press [POP MENU / MENU], a menu pops out
on the TV screen during play back.
1
1 During the playback of BD-video, press
2
3
2
3
4
5
6
- - / 20
[POP MENU / MENU].
Use [K / L / s / B] to select an item, then press
[OK].
Press [POP MENU / MENU] to exit.
File List
JPEG_Disc
Folder_1
Folder_2
Folder_3
JPEG_A
JPEG_B
JPEG_C
JPEG_D
Note
• Contents of menus and corresponding menu
operations may vary among discs. Refer to the
manual accompanying the disc for details.
Page Up
Page Down
Media Mode
e.g.) JPEG
1
2
3
Track information
File information
“CD-DA” will be displayed.
Current Disc or folder name will be
displayed.
List of the track number and time.
List of the file / folder names in the
current folder / disc
4
Operation
guide
5
Current page / Total page number
Playback status
6
24
:
audio CD
MP3 / WMA / :
JPEG
audio CD
:
MP3 / WMA / :
JPEG
audio CD
:
MP3 / WMA / :
JPEG
: Press [RED] to go to the previous
page.
Press [GREEN] to go to the next page.
Press [YELLOW] to select “Media
Mode”
EN
PLAYBACK
Icons:
Kodak Picture CD
: Folder
: audio CD tracks
: MP3 files
: WMA files
This unit can also run JPEG files stored on Kodak Picture
CD. You can enjoy picture images on the TV set by playing
back the Kodak Picture CD. This unit conforms to ver.7.0 of
Kodak Picture CD. For details of Kodak Picture CD, contact
a shop that provides developing service of Kodak Inc.
1
: JPEG files
1
Press [C (stop)] to stop playback.
64
2
1
2
3
4
Page Next
3
File information
Current page / Total page number
Operation guide: Press [BLUE] to go to the previous
page.
Press [YELLOW] to go to the next
page.
Playback status
2
Use [K / L / s / B] to select a
desired file to be played back, then
press [B (play)] or [OK].
• An image will be played back from the
selected file and go to the next one in turn.
Press [C (stop)] to stop playback.
To return to the first item:
Press [TOP MENU].
OTHERS
3
FUNCTION SETUP
• Unrecognizable characters will be replaced with
asterisks.
• Some unplayable folders or files may be listed due to
the recording status.
• High-resolution JPEG files take longer to be
displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back in this unit.
• The system can recognize up to 255 folders / 999 files
for CD, 999 folders / 9,999 files for BD and DVD.
• The 9th and deeper hierarchies cannot be displayed
for CD. The 10th and deeper hierarchies cannot be
displayed for BD and DVD.
• For the SD Memory Card playback, refer to “Reading
the SD Memory Card” on page 21.
• Extensions other than listed below cannot be
recognized.
- MP3 : “.mp3”
- WMA : “.wma”
- JPEG : “.jpg”/ “.jpeg”
• With regard to the multi-border BD-RE/-R,
additionally recorded sections cannot be recognized.
• With regard to the multi-border DVD-RW/-R,
additionally recorded sections may not be
recognized.
Page Prev
PLAYBACK
Note
CONNECTIONS
<MP3/Windows Media™ Audio>
• Sampling
: 32 kHz, 44.1 kHz or 48 kHz
frequency
• Constant bit rate : 112 kbps - 320 kbps (MP3),
48 kbps - 192 kbps
(Windows Media™ Audio)
<JPEG>
• Upper limit
: 2,560 x 1,900 dots (sub sampling is
4:4:4)
5,120 x 3,840 dots (sub sampling is
up to 4:2:2)
• Lower limit
: 32 x 32 dots
• File size of image : 12 MB
maximum
4
Thumbnail
Pictures
It is recommended that files to be played back in this
unit are recorded under the following specifications:
EN
When Kodak Picture CD is inserted
in this unit, Kodak Picture CD menu
will appear automatically on the TV
screen.
INTRODUCTION
4
EN
To return to the file played last:
Press [POP MENU / MENU].
25
PLAYBACK
Tips for JPEG / Kodak Picture CD Playback
• The selected file will be played back and go to the
next file in the current hierarchy in turn every 10
seconds.
• Every press on [ANGLE] will turn the image
clockwise by 90 degrees when an image is displayed.
• To change the visual effect for switching the
playback image, press [MODE] once, then use
[s / B] or [OK] to switch between “Cut In/Out” and
“Fade In/Out”.
• During JPEG / Kodak Picture CD playback, press
[MODE] twice to change the size of the playback
image, then use [s / B] or [OK] to switch between
“Normal” (100 %) and “Small” (95 %). The size change
may have no effect on some files (e.g. files with a
small picture size).
Step by Step Playback
1 In pause mode, press [F (pause)] repeatedly.
2
Every time you press [F (pause)], playback will
advance one step at a time.
Press [B (play)] to return to normal playback.
Note
• Only step by step forward is available.
• Set “Still Mode” setting to “Field” in “Video” menu if
pictures in step by step playback mode are blurred.
Refer to “Still Mode” on page 38.
Fast Forward / Fast Reverse
Repeat Playback
Available repeat functions vary depending the discs.
1 During playback, press [D (forward)]
repeatedly for fast forward.
During playback, press [E (reverse)] repeatedly
for fast reverse.
Every time you press [D (forward)] or
[E (reverse)], the playback speed will change.
2 Press [B (play)] to return to normal playback.
Note
• For BD and DVD, speed changes in 5 different levels.
• For audio CD, MP3 and Windows Media™ Audio,
speed changes in 3 different levels.
• For audio CD, fast forward / fast reverse search
between different tracks are not available during
program and random playback.
• For MP3 and Windows Media™ Audio, fast forward /
fast reverse search between different files are not
available.
Slow Forward Playback
1 During playback, press [REPEAT] repeatedly to
select the desired repeat mode.
Repeat mode
Chapter repeat
The current chapter will be played
back repeatedly.
Title repeat
The current title will be played back
repeatedly.
Track repeat
Available media
The current track will be played back
repeatedly.
Group repeat
The current folder will be played
back repeatedly.
All repeat
All tracks or files in the media will be
played back repeatedly.
1 During playback, press [F (pause)], then press
[D (forward)].
Note
Every time you press [D (forward)], playback
speed will change.
• The repeat setting will be canceled when you stop
playback.
• The chapter, title, track or group repeat will be
cleared when moving to another chapter, title, track /
file or folder.
• Chapter and title repeat are not available with some
scenes.
• When the repeat setting is set for a MP3 or WMA
folder (file), the repeat setting will be canceled if you
select other MP3 or WMA folder (file) to playback.
2 Press [B (play)] to return to normal playback.
Note
• Slow motion speed changes in 3 different levels.
• Only slow forward is available.
• Set “Still Mode” setting to “Field” in “Video” menu if
pictures in the slow forward playback mode are
blurred. Refer to “Still Mode” on page 38.
26
EN
PLAYBACK
3 Press [B (play)] to start program playback.
Program Playback
• The program playback will start.
2 / 16
You can play back the disc/card in your desired order.
1 In stop mode, press [MODE].
2 Use [K / L] to select a track / folder / file, then
2
4
9
11
12
14
8
press [OK].
1
2
3
4
5
6
- - / 16
Program
CD_DA
Page Up
Page Down
0:36
1:14
0:45
0:50
0:53
0:20
0:54
2
4
9
11
12
14
8
Page Down
1:14
0:50
1:14
0:50
0:53
0:54
0:36
Page Prev
To exit from the program playback mode:
• Press [RETURN] in stop mode.
Note
7
Page Next
8
3
5
6
8
“CD-DA” will be displayed.
Current Disc, SD Memory Card,
or folder name will be displayed.
Track / Folder / File list in the
original order.
Track / File list in the
programmed order.
Cumulative playback time of all tracks in the
programmed list. (audio CD only)
Playback status
Current page / Total page number
OTHERS
Operation Guide: Press [RED] to go to the previous
page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
Press [BLUE] to go to the
previous page in the
programmed list.
Press [YELLOW] to go to the next
page in the programmed list.
• For MP3, WMA or JPEG files, use [K / L] to select a
folder, then press [OK] first, and then use [K / L] to
select a file, then press [OK].
• Press [CLEAR] to erase the last file of the program.
• Use [K / L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the program.
• The programmed tracks / files is displayed in the right
hand screen.
• Use [s / B] to go back / forward between the
hierarchy of folders.
EN
FUNCTION SETUP
7
Track information
File information
PLAYBACK
4
audio CD
:
MP3 / WMA /
:
JPEG
audio CD
:
MP3 / WMA /
:
JPEG
Track / Folder / :
File list
Programmed list :
• During program playback, press [C (stop)] once to
set the resume point, and then press [B (play)] to
resume program playback from where [C (stop)]
was pressed (audio CD) or from beginning of the file
where [C (stop)] was pressed (MP3 / WMA / JPEG).
• During program playback, press [C (stop)] twice to
display the program screen. To go back to the normal
program playback, press [RETURN] to exit from the
program screen, then press [B (play)].
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the program, press
[REPEAT] repeatedly until “
Track” appears
during playback. To repeat the entire program, press
[REPEAT] repeatedly until “
All” appears during
playback.
• Playback from a desired track / file and random
playback are not available during program playback.
• Press [MODE] to switch to the random playback mode.
• The program will be cleared when;
- the unit is turned into the standby mode.
- the media mode is switched to the other mode.
- the disc / card is removed. (as for “Disc” mode, just
opening the disc tray will clear the program info.)
CONNECTIONS
2
EN
0 : 26 : 24
1:14
0:50
1:14
0:50
0:53
0:54
0:36
0 : 26 : 24
e.g.) audio CD
1
Total
INTRODUCTION
8
9
10
11
12
13
14
Total
0 : 01 : 05
Program
CD_DA
27
PLAYBACK
Random Playback
Adjusting the Picture
This function shuffles the playback order of tracks / files.
You can adjust the picture quality.
1 In stop mode, press [MODE] twice.
1 During playback, press [MODE] repeatedly
1
2
3
4
5
6
2
- - / 16
Random
CD_DA
1
2
3
4
5
6
7
Total
1 : 13 : 29
Black Level
Noise Reduction
0:36
1:14
0:45
0:50
0:53
0:20
0:54
Black level
Page Down
e.g.) audio CD
audio CD
MP3 / WMA /
JPEG
audio CD
MP3 / WMA /
JPEG
Track / File list
: Track information
: File information
4
Operation
Guide
: Press [RED] to go to the previous
page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
5
Total playback time of all tracks. (audio CD only)
Playback status
2
3
6
On
Off
e.g.) DVD-video
1
until
appears.
Use [K / L] to select your desired item, then
use [s / B] to adjust the setting.
You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can
select “On” or “Off”.
“On” : Makes the dark parts brighter.
“Off” : Shows the original picture as recorded.
Noise reduction (DVD-video only)
: “CD-DA” will be displayed.
: Current Disc, SD Memory Card, or
folder name will be displayed.
: Track / File list in the original order
will be displayed.
2 Press [B (play)] to start random playback.
Reduces the noise of the playback picture.
“Off” : Shows the original picture as recorded.
“1” : Executes 3D noise reduction which detects and
deletes the noise by comparing each picture
frames.
“2” : Executes MPEG noise reduction which reduces
the block noise and mosquito noise on the
subtitle on movie.
“3” : Executes both MPEG noise reduction and 3D
noise reduction.
3 Press [RETURN] to exit.
To exit from the random playback mode:
• Press [MODE] in stop mode.
Note
• During the random playback, press [C (stop)] once
to set the resume point, and then press [B (play)] to
resume random playback from where [C (stop)] was
pressed (audio CD) or from beginning of the file
where [C (stop)] was pressed (MP3 / WMA / JPEG).
• To repeat the current track / file in the random
selection, press [REPEAT] repeatedly until
“
Track” appears during playback. To repeat the
entire random selection press [REPEAT] repeatedly
until “
All” appears during playback.
• Playback from a desired track / file is not available
during random playback.
• In stop mode, press [RETURN] to switch to the
program playback mode.
• For a disc containing mixed MP3 and Windows
Media™ Audio files, random playback of those files
will be performed.
28
Note
• The setting will remain the same even if the unit is
turned to the standby mode.
• “Black Level” is not effective under the following
conditions.
- When the picture is output from HDMI OUT jack.
- When the picture is output from COMPONENT
VIDEO OUT jacks with “Component Output” set to
“480p / 720p / 1080i”.
EN
PLAYBACK
PIP (BONUSVIEW) Setting
Some BD-video have the PIP function which enables you
to display the secondary video in the primary video. You
can call up the secondary video by pressing [MODE]
whenever the scene contains the secondary video.
Camera Angle
Some BD-video and DVD-video contain scenes which have
been shot simultaneously from various angles. You can
change the camera angle when
appears on the TV
screen.
EN
1 During playback, press [ANGLE].
• The selected angle will be displayed on the display
bar at the top of the TV screen.
primary
video
1/3
INTRODUCTION
secondary
video
2 Use [K / L] to select your desired angle.
Note
• If “Angle Icon” setting is “Off” in “Others” menu,
will not appear. Refer to page 40.
1 During playback, press [MODE] repeatedly
until the PIP function appears.
CONNECTIONS
2 Use [K / L] to select the secondary video you
want.
• The secondary video will be displayed and the
secondary audio will be output.
• Use [s / B] to switch between current setting and
“Off”.
3 Press [RETURN] or [MODE] to remove the PIP
information.
PLAYBACK
Note
FUNCTION SETUP
• The secondary audio will not be output when the
secondary audio is set to “Off” or when “BD Audio
Mode” is set to “HD Audio Output”. Refer to
“Switching Audio Soundtrack” on page 31 and
“Setting the BD Audio Mode” on page 32.
OTHERS
EN
29
PLAYBACK
Using [the Number buttons] (Direct Search)
Search
Using [H / G (skip)]
1 During playback, press [G (skip)] to move to
the next track / title / chapter / file. Press it
repeatedly to skip to subsequent tracks. Press
[H (skip)] once to go back to the beginning of
the current track. Press it repeatedly to go to
the previous tracks.
• For JPEG files, press [H (skip)] to go back to the
previous file.
Note
• For BD and DVD, if title contains no chapters,
[H / G (skip)] changes the title.
• For JPEG files, [s / B] is also available.
Title Search
In stop mode, enter the title number you want to
search using [the Number buttons].
Playback of the title will start in a few seconds.
Chapter Search
During playback of a title, enter the chapter number
you want to search using [the Number buttons].
Playback of the chapter will start in a few seconds.
Track / File Search
Enter the track / file number you want to search using
[the Number buttons].
Playback of the track / file will start in a few seconds.
Note
• As for the BD-video, how it performs will be strongly
determined by the disc, and may not perform as
described here.
Using [SEARCH]
By using [SEARCH], you can select the following search
modes.
Search mode
Available media
/
Chapter / Title search
Track search
Time search
1 During playback, press [SEARCH] repeatedly
until your desired search mode appears.
2 Enter the desired chapter, title, track, file
number or time to search for using
[the Number buttons].
• Chapter, title, track or time search will start.
• Press [CLEAR] to erase an incorrect input.
Note
• During program and random playback, search
functions are not available except the search using
[H / G (skip)].
• Time search is available only in the same track, file or
title.
• For BD, chapter and time search are available only
during playback.
30
EN
PLAYBACK
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Some BD and DVD may have subtitles in 1 or more
languages. For commercially available discs, the
supported languages can be found on the disc case.
Follow the steps below to switch the subtitle languages
during playback.
1 During playback, press [SUBTITLE].
2 Use [K / L] to select “Primary Subtitle”,
“Secondary Subtitle” or “Subtitle Style”, then
press [OK].
Switching Audio Soundtrack
Some BD and DVD contain multiple audio streams. Those
are often in different audio languages or audio formats.
For BD, available audio varies depending on “BD Audio
Mode” setting. Refer to page 32 for more information.
1 During playback, press [AUDIO].
2 Use [K / L] to select “Primary” or “Secondary”
audio to set, then press [OK].
Primary
1
2 ENG/11
2 ENG/11
Subtitle Style
2/25
“Primary Subtitle”
“Secondary Subtitle”
3 Use [K / L] to select your desired subtitle or
Dolby D
Multi-ch
/3
2
ENG
Dolby D+
Multi-ch
/3
“Primary”
: Sets the audio for the primary video.
“Secondary” : Sets the audio for the secondary video.
3 Use [K / L] to select your desired audio stream
channel.
• For “Secondary”, use [s / B] to switch between
current audio setting and “Off”.
CONNECTIONS
“Subtitle Style”
: Sets the subtitle for the
primary video.
: Sets the subtitle for the
secondary video.
: Sets style of the subtitle.
ENG
Secondary
4 Press [AUDIO] to exit.
style.
• Use [s / B] to switch between current subtitle
setting and “Off”.
4 Press [SUBTITLE] to exit.
1 During playback, press [AUDIO].
2 Use [K / L] to select your desired audio stream
1
ENG
/4
3 Press [SUBTITLE] to exit.
ENG
Dolby D 3/2.1ch
48k
/3
e.g.) DVD-video
• For audio CD, you can select following options.
“Stereo” : Both right and left channels are active
(stereo).
“L-ch” : Only left channel is active.
“R-ch” : Only right channel is active.
FUNCTION SETUP
• Use [s / B] to switch between current subtitle
setting and “Off”.
1
PLAYBACK
channel.
1 During playback, press [SUBTITLE].
2 Use [K / L] to select your desired subtitle.
3 Press [AUDIO] to exit.
Note
OTHERS
• Some discs will only allow you to change the
subtitles from the disc menu or pop-up menu. Press
[TOP MENU] or [POP MENU / MENU] to display the
disc menu or pop-up menu.
• If 4-digit-language code appears in the subtitle
menu, refer to “Language Code List” on page 49.
• If the disc has no subtitle language or subtitle style,
“Not Available” will be displayed on the TV screen.
• During playback of the secondary video, the primary
subtitle setting is not available except when there is
no subtitle for the secondary video.
• If you select a language that has a 3-letter-language
code, the code will be displayed every time you
change the subtitle language setting. If you select
any other languages, “---” will be displayed instead.
(Refer to page 49.)
EN
INTRODUCTION
Primary Subtitle
Secondary Subtitle
EN
31
PLAYBACK
Note
• The secondary audio will not be output when the
secondary video is not displayed or when “BD Audio
Mode” is set to “HD Audio Output”. (For some BD,
secondary audio will be output even when
secondary video is off.)
• The sound mode cannot be changed during
playback of discs not recorded in multiple audio.
• Some discs allow changing the audio language
setting on the disc menu. (Operation varies
depending on the discs. Refer to the manual
accompanying the disc.)
• [AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).
• If you select a language that has a 3-letter-language
code, the code will be displayed every time you
change the audio language setting. If you select any
other languages, “---” will be displayed instead.
(Refer to page 49.)
• If 4-digit-language code appears in the audio menu,
refer to page 49.
• If the disc has no audio language, “Not Available” will
be displayed on the TV screen.
• For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
Setting the BD Audio Mode
There are 2 options for the “BD Audio Mode” setting; either
by setting the output to the secondary and interactive
audio accompanied by the primary audio or by setting
only the primary audio. Depending on the setting of the
mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS, or DTS-HD output changes between multi LPCM and
Bitstream.
1 In stop mode with BD inserted, press [MODE].
2 Use [K / L] to select your desired setting.
BD Audio Mode
Mix Audio Output
“Mix Audio Output”:
If it is available, BD-video’s secondary and interactive
audio will be output with the primary audio.
• The secondary audio is the audio for the secondary
video (Director’s comment etc.) and the interactive
audio is the audio for the interactive application
(Button click sounds etc.).
“HD Audio Output”:
Only the primary audio will be output. Set this mode in
order to output , Dolby Digital Plus, Dolby TrueHD, or
DTS-HD audio of BD through HDMI connection.
3 Press [RETURN] to exit.
Note
• In “Mix Audio Output” mode, if there is no secondary
and interactive audio, the audio will be output as
“HD Audio Output” mode.
• You can also set “BD Audio Mode” from the setup
menu. Refer to page 39.
• Refer to “Audio Output” on page 42 for how BD
Audio will be output.
32
EN
PLAYBACK
Volume Control
You can control the volume level of the audio output from
5.1ch speakers.
To increase or decrease the volume level :
Press [VOL. + / –].
• The volume level will increase or decrease, every time
you press [VOL. +] or [VOL. –].
• The volume level will be displayed on the front panel
display.
To turn off the volume temporarily :
Press [MUTE].
• To restore the volume, press [MUTE] again or press
[VOL. + / –].
• “MUTE” will be displayed on the front panel display.
• This function is only available for the audio output
from 5.1ch speakers.
• Pressing [VOL. + / –] does not work while the setup
menu is displayed.
• If you turn up the volume too much, the audio may
get distorted. To enjoy clear sounds, please turn
down the volume.
Select the sound effect mode for the audio output from
5.1ch speakers to suit your video or music.
1 During playback, press [SOUND MODE] repeatedly
to select the desired sound effect mode.
Video
Off
Action
Rock
Drama
Jazz
Concert
Classic
Sports
Sports
Description
Turns off the sound effect
mode.
Enhanced low and highrange. Ideal for action
movies and rock or pop
music.
Clear mid and high-range.
Ideal for drama movies
and jazz music.
Neutral sound. Ideal for
live concerts and classical
music.
Moderate mid-range and
surround effects for clear
vocals and the
atmosphere of a live sport
venue.
Note
PLAYBACK
• In disc or SD card mode, pressing [SOUND MODE]
does not work while in the Resume-On-Stop mode.
• In FM mode, pressing [SOUND MODE] does not
work when no audio is being input.
• Pressing [SOUND MODE] does not work during
playback of JPEG files.
• This function is effective only for the audio output
from 5.1ch speakers.
• The volume will be restored if you press
[SOUND MODE] when the audio is muted.
FUNCTION SETUP
OTHERS
Note
• The availability of surround sound modes will
depend on the audio source.
• In disc or SD card mode, pressing [SURROUND] does
not work while in the Resume-On-Stop mode.
• In FM mode, pressing [SURROUND] does not work
when no audio is being input.
• Pressing [SURROUND] does not work during
playback of JPEG files.
• This function is effective only for the audio output
from 5.1ch speakers.
• The volume will be restored If you press
[SURROUND] when the audio is muted.
• For mulch-channel audio, “Multi ch Stereo”, “Dolby
Pro Logic II Movie” or “Dolby Pro Logic II Music”
cannot be set.
EN
CONNECTIONS
Off
Selecting Surround Mode
Select the surround mode for the audio output from 5.1ch
speakers.
1 During playback, press [SURROUND] repeatedly to
select the desired surround mode.
“Off”:
Turns off the surround mode.
“2.1ch Stereo”:
Set the surround mode to “2.1ch Stereo”.
(2.1ch Stereo sound from front left/right speakers.)
“Multi ch Stereo”:
Set the surround mode to “Multi ch Stereo”.
(5.1ch stereo sound from 5.1ch speakers.)
“Dolby Pro Logic II Movie”:
Set the surround mode to “Dolby Pro Logic II Movie”.
(Dolby Pro Logic II 5.1ch surround sound.)
“Dolby Pro Logic II Music”:
Set the surround mode to “Dolby Pro Logic II Music”.
(Dolby Pro Logic II 5.1ch surround sound.)
Music
EN
INTRODUCTION
Note
Selecting Sound Effect Mode
33
PLAYBACK
Switching Active Source Mode
You can change the active source mode to the desired
external audio inputs and enjoy audio from the connected
device with the multi-channel surround sound capabilities.
1 Press [SOURCE ⴐ / ⴑ] .
• “Input Select” screen will appear.
2 Use [K / L] to select the desired source mode, then
press [OK].
“Disc / SD ":
Set the active source mode back to this unit.
“Aux”:
Set the active source mode to the AUDIO IN(AUX) jacks.
“Coaxial”:
Set the active source mode to the DIGITAL AUDIO IN
(Coaxial) jack.
“MP3 Line-in”:
Set the active source mode to the MP3 LINE-IN jack.
“FM”:
Set the active source mode to the FM ANT 75Ω jack.
Play from Portable Media Player
Simply connect your portable media player (e.g. MP3
player) to this unit to enjoy superior sound quality from
your music collections.
1 Connect your portable media player to the MP3
LINE-IN jack on this unit.
• Refer to “Connecting Portable Media Player” on
page 16.
2 Turn on your portable media player.
3 Press [SOURCE ⴐ / ⴑ] .
• “Input Select” screen will appear.
4 Use [K / L] to select “MP3 Line-in”, then press [OK].
5 Start play music on your portable media player.
Note
• Control playback is only possible on the portable
media player.
• Stop playback on the portable media player before
you switch to other source mode.
Sleep Timer
The sleep timer enables the unit to switch to the standby
mode automatically after the selected preset time.
To set the sleep timer :
Press [SLEEP] repeatedly to select the desired preset
time.
“SLP OFF”:
Turns off the sleep timer.
“SLP 15”:
Set the preset turn-off time to 15 minutes.
“SLP 30”:
Set the preset turn-off time to 30 minutes.
“SLP 60”:
Set the preset turn-off time to 60 minutes.
“SLP 90”:
Set the preset turn-off time to 90 minutes.
“SLP 120”:
Set the preset turn-off time to 120 minutes.
“SLP 150”:
Set the preset turn-off time to 150 minutes.
To check or change the setting :
Press [SLEEP] once to display the remaining time.
To change the setting, press [SLEEP] repeatedly until your
desired preset time is displayed.
To cancel sleep timer :
Press [SLEEP] repeatedly until “SLP OFF” is displayed.
Note
• The sleep timer will be activated even if the unit is in
operation.
• Pressing [SLEEP] does not work while the setup
menu is displayed.
34
EN
PLAYBACK
Radio Operations
Guide to the FM Radio Screen
1
By connecting the supplied FM wire antenna, you can
listen to FM radio on this unit.
FM
Presetting Radio Stations
4 Press [s / B].
Note
• While auto tuning, audio will be muted until this unit
finds a radio station with sufficient signal strength.
1 Follow steps 1) to 2) in “Presetting Radio Stations”
2
Note
6
Stereo
EN
FM
Received
-- 105.00MHz
+ 0.1MHz
- 0.1MHz
Tuninggng +
Tuning+
Prev
1
2
3
4
5
6
7
8
Next
08
09
10
11
12
13
14
100.00Mhz
101.50Mhz
102.50Mhz
103.50Mhz
104.50Mhz
107.50Mhz
87.50Mhz
Page Prev
Page Next
7
8
FM icon / Audio mode (Stereo or Mono mode)
Current status
Frequency of current radio station
Button guide for tuning
Preset station list
Playback status
Current page / Total page number
Operation Guide : Press [RED] to go to the previous
station in the preset station list.
Press [GREEN] to go to the next
station in the preset station list.
Press [BLUE] to go to the
previous page in the preset
station list.
Press [YELLOW] to go to the next
page in the preset station list.
Deleting a Preset Radio Station
1 Follow steps 1) to 2) in “Presetting Radio Stations”
on page 35.
2 Use [RED] / [GREEN] / [BLUE] / [YELLOW] to select the
desired preset station.
3 Press [CLEAR].
• The selected station is deleted from the preset station
list.
EN
OTHERS
• You can also select the preset station by :
- Entering the desired preset station number using
[the Number buttons].
- Pressing [SEARCH] and then enter the desired
preset station number using
[the Number buttons].
• You can change the audio mode(stereo or mono
mode) by pressing [AUDIO] repeatedly.
FUNCTION SETUP
on page 35.
Use [RED] / [GREEN] to select the desired preset
station.
• This unit will tune to the selected preset radio station.
• To go to the previous / next page of the preset station
list, press [BLUE] / [YELLOW].
5
PLAYBACK
Listening to a Preset Radio Station
4
CONNECTIONS
5
• This unit will start tuning automatically until a radio
station with sufficient signal strength is found.
• If necessary, repeat press [s / B] again until you find
the desired radio station.
• To fine-tune the reception of a weak station, press
[K / L] repeatedly until an optimal reception is found.
Press [OK].
• The radio station is added to the preset station list.
3
INTRODUCTION
When you access radio mode for the first time, follow the
instruction to store a radio station to your preset station
list. You can store up to 40 FM radio stations in the
memory.
1 Connect the supplied FM wire antenna to the FM
ANT 75Ω jack on this unit.
• Refer to “Connecting FM Radio Antenna” on page 16.
2 Press [SOURCE ⴐ / ⴑ].
• “Input Select” screen will appear.
3 Use [K / L] to select “FM”, then press [OK].
2
35
FUNCTION SETUP
In the setup menu screen, you can access various kinds of menus, and customize them as you prefer.
To call up the setup menu screen, press [SETUP]. Then follow the instructions below to navigate through the screen.
< Setup menu screen >
1
Quick
2
1
2
3
Media Select
Disc
Audio Output
Speakers
HDMI Video Resolution
Auto
Component Output
480i
Player Menu
English
4
3
4
Quick menu
Contains only the frequently used menus.
Custom menu
Contains all the available setup menus.
Initialize menu
Contains the menus that relates to the initialization of
the unit or the SD card.
Menu window
Displays the available items for the selected menu.
How to Navigate through the Setup Menus
•
•
•
•
•
Use [K / L] to move the highlight up and down.
Press [OK] to access the options of an item, to switch settings, or to confirm the selection.
Use [s / B] to switch settings in some menus.
Press [RETURN] to go back to the previous screen.
Press [SETUP] to exit.
List of Setup Menus
Items with (*) can be accessed from “Quick” menu also.
The items highlighted in grey are the default setting.
Category
Language
Menus / Options
Audio
Custom
Subtitle
Disc Menu
36
Original
English
French
Spanish
German
Italian
Swedish
Dutch
Russian
Off
English
French
Spanish
German
Italian
Swedish
Dutch
Russian
English
French
Spanish
German
Italian
Swedish
Dutch
Russian
Chinese
Chinese
Japanese
Korean
Danish
Finnish
Norwegian
Icelandic
Hungarian
Romanian
Chinese
Japanese
Korean
Danish
Finnish
Norwegian
Icelandic
Hungarian
Romanian
Japanese
Korean
Danish
Finnish
Norwegian
Icelandic
Hungarian
Romanian
Turkish
Description
Turkish
Greek
Irish
Portuguese
Polish
Czech
Slovak
Bulgarian
Other
Turkish
Greek
Irish
Portuguese
Polish
Czech
Slovak
Bulgarian
Other
Greek
Irish
Portuguese
Polish
Czech
Slovak
Bulgarian
Other
Sets the audio language for BD-video
or DVD-video playback.
“Original”:
Activates the disc’s original language.
“Other”:
If you select “Other”, enter 4-digitcode for the desired language (refer to
page 49). Only the languages
supported by the disc can be selected.
Sets the subtitle language for BDvideo or DVD-video playback.
“Other”:
If you select “Other”, enter 4-digitcode for the desired language (refer to
page 49). Only the languages
supported by the disc can be selected.
Sets the language for disc menu.
“Other”:
If you select “Other”, enter 4-digitcode for the desired language (refer to
page 49). Only the languages
supported by the disc can be selected.
EN
FUNCTION SETUP
Category
Language
Auto (XXX)
English
Français
Español
Component Output*
Reduces the posterization effect of the
playback picture.
“Auto”:
Reduces the posterization effect by
automatically outputting up to 36 bit
color whenever the unit recognizes
the connected display device supports
Deep Color feature.
“Off”:
Outputs the standard 24 bit color.
Sets resolution for component output
picture.
FUNCTION SETUP
Sets the optimum progressive mode
for the image material output from
HDMI OUT jack and COMPONENT
VIDEO OUT jacks.
“Auto”:
The progressive mode will detect 24frame film material (movies) and
automatically select appropriate
progressive mode.
“Video”:
Suited for playing back video material
discs (TV shows or animation).
PLAYBACK
Progressive Mode
480i
480p
720p
1080i
Auto
Video
Sets the resolution of the video signal
being output from the HDMI OUT jack.
“Auto”:
HDMI video resolution will be selected
automatically depending on the
connected HDMI device.
EN
CONNECTIONS
16:9 Wide
TV Aspect
• Refer to page 42 for 4:3 Pan & Scan
more information. 4:3 Letter Box
16:9 Squeeze
HDMI Video
Auto
Resolution
480p
• This feature is
available only when
the display device is
connected by an
HDMI cable.
HDMI Deep Color
Auto
• This feature is
Off
available only when
the display device is
connected by an
HDMI cable, and
when it supports
Deep Color feature.
Description
Sets the language for player menu.
(on-screen display menu)
“Auto”:
Activates the Get & Set Menu
Language function (refer to page 44).
• “Auto” is available only when “HDMI
CEC” is set to “On”.
• Inside the parentheses next to “Auto”
will be currently selected language.
Sets the aspect ratio of the playback
image to fit your TV.
INTRODUCTION
Custom
Video
Menus / Options
Player Menu*
OTHERS
EN
37
FUNCTION SETUP
Category
Menus / Options
Still Mode
Auto
Field
Frame
Custom
Video
Description
Adjusts picture resolution and quality in
still mode.
“Auto”:
Automatically selects the best
resolution setting (“Frame” or “Field”)
based on the data characteristics of the
pictures.
“Field”:
Stabilizes the pictures, although the
picture quality may become coarse due
to the limited amount of data. Select
“Field” when the pictures are still
unstable even if “Auto” is selected.
“Frame”:
Displays relatively motionless pictures
in higher resolution. “Frame” improves
the picture quality, although it may
unstabilize the pictures due to alternate
output of 2-field data.
• An individual picture on the TV screen
is called “Frame”, which consists of
two separate images called “Field”.
Some pictures may be blurred at the
auto setting in “Still Mode” setting
due to their data characteristics.
Note for “HDMI Video Resolution” and “Component Output”
• Even if you set “HDMI Video Resolution” setting to “Auto”, when this unit is connected to a DVI compatible display
devices with an HDMI-DVI cable, 480p signal will be output.
• Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.
• You cannot change the video resolution during Blu-ray Disc playback. To change the resolution, stop playback.
• In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High Speed
HDMI Cable is recommended) and select “Auto” if the connected TV is compatible with 1080p24 frame input.
• Even if the connected TV is compatible with 1080p24 frame input and you set “HDMI Video Resolution” setting to
“Auto”, when the contents of the disc are not compatible for 1080p24 frame, 1080p60 frame will be output.
• If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output” setting,
press and hold [PLAY B] on the front panel for more than 5 seconds. Both settings will be reset to the default
automatically.
• For video resolution of the component output, you can only select the video resolution which is currently output
from HDMI OUT jack or “480i” if HDMI cable is connected.
• If you change “HDMI Video Resolution” setting or set the setting to “Auto”, the video resolution for the component
output will be switched to “480i”.
• If you play back copy-protected DVD-video, 480p signal will be output from COMPONENT VIDEO OUT jacks, when
“Component Output” setting is set to “720p” or “1080i”.
• With some copy-protected BD-video, the video image may only be output from HDMI OUT jack.
• Refer also to your TV's manual.
38
EN
FUNCTION SETUP
Category
Audio
Menus / Options
BD Audio Mode
Custom
Center
0~7
Width
Dimension -3~3
Panorama
On
Off
Off
Manual
Auto
OTHERS
39
FUNCTION SETUP
“Off”:
Deactivates the Test Tone.
“Manual”:
Allows you to manually select the
speaker to test.
“Auto”:
Automatically tests all speakers.
• To stop the test tone, press
[RETURN].
Front Lch
default is 0 Sets the volume level for each
Center
default is 0 speaker to get ideal audio balance.
Subwoofer
default is 0
-10dB
default is 0
Front Rch
~
Surround
+10dB default is 0
Rch
default is 0
Surround
Lch
Default
Sets the volume level of all
speakers to the default setting.
Test Tone
PLAYBACK
Surround Effects
Speaker Setup
• Sets the surround
• This feature is
effect of audio when
available only when
“Audio Output” is set the setting of
surround mode is set
to “Speakers”.
to “Dolby Pro Logic II
(Refer to page 42.)
Movie” or “Dolby Pro
Logic II Music”. (Refer
to “Selecting
Surround Mode” on
page 33.)
Channel Level
• Tests or sets the
volume for each
speaker.
EN
CONNECTIONS
EN
Speakers
HDMI Normal
HDMI LPCM
For BD, selects whether to output
the secondary and interactive
audio with primary audio if it is
available or only the primary audio.
Refer to “Setting the BD Audio
Mode” on page 32.
“Mix Audio Output”:
The audio for the secondary video
and the interactive application will
be output together with the audio
for the primary video.
“HD Audio Output”:
Outputs only the primary audio.
Set this mode in order to output
Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS or DTS-HD
audio of BD through HDMI
connection.
“Speakers”
Audio will be output from the
5.1ch speakers.
“HDMI Normal”
The Multi-channel audio signals
are output from HDMI OUT jack
with Bitstream or LPCM depending
on the material.
“HDMI LPCM”
The Multi-channel or stereo audio
signals are output from HDMI OUT
jack with LPCM.
default is 3 Adjust the sound balance between
center and front speakers.
default is 0 Adjust the sound balance between
front and rear speakers.
“On”:
Sets the sound of center speaker to
have surround-sound effect.
“Off”:
Sets the sound of center speaker to
normal.
INTRODUCTION
Audio Output*
• Refer to page 42 for
more information.
Description
Mix Audio Output
HD Audio Output
FUNCTION SETUP
Category
Audio
Menus / Options
Delay Time
Speaker Setup
• This is a parameter
• This feature is
for optimizing the
available only when
“Audio Output” is set timing at which the
sound outputs from
to “Speakers”.
the speakers
(Refer to page 42.)
according to the
distance from the
listening position.
Distance
Description
Feet
Meters
Front
Center
Surround
Feet :
0 ~ 15
Meters :
0 ~ 4.5
Default
DRC
Custom
Password input field
Parental
• Refer to
page 44 for
more
information.
On
Off
BD Rating Level
DVD Rating Level
Password Change
Others
Angle Icon
On
Off
Panel Display
Auto
Bright
Dimmer
On
HDMI CEC
• This feature is
Off
available only when
the display device is
connected with an
HDMI cable, and
when it supports
HDMI CEC feature.
• Refer to page 44 for
more information.
Disc
Media Select*
SD Card
Software Update
Current Version
• Refer to page 45 for
more information.
Disc Update
40
All
Age Setting
All
8 [Adult]
to
1 [Kid Safe]
Password input field
Sets the unit of measure for
“Delay Time”.
default is 3 Sets the distance from the
default is 3 listening point to each speaker to
default is 3 get the ideal delay time.
• If you change the setting of
“Front”, the setting of “Center”
and “Surround” will be set to the
same setting automatically.
• If you set “Front” to 0 ft (0m),
you can only select 0 ft (0m) for
“Center” and “Surround”.
• Difference of the values among
“Front” and “Center” cannot
exceed 5 ft (1.5m).
Sets the unit of measure and all
delay time settings to the default
setting.
Sets whether to compress the
range of sound volume (dynamic
range control) when Dolby Digital,
Dolby Digital Plus or Dolby
TrueHD audio is played back.
Sets the rating level for the BD
playback.
Sets the rating level for the DVD
playback.
Sets the new password for
“Parental” setting.
Sets whether to display the angle
icon on the TV when playing back
the scene with various angles.
Sets the brightness of the front
panel display.
“Auto”:
Front panel display gets darker
during playback.
“Bright”:
Front panel display gets brighter.
“Dimmer”:
Front panel display gets darker.
Sets whether to utilize the HDMI
CEC function.
Select the media to play back.
No
Yes
Indicates the current firmware
version.
Allows you to update this unit’s
firmware using a disc.
EN
FUNCTION SETUP
Category
Initialize
No
Yes
Format SD No
Card
Yes
Erase Saved No
BD-ROM
Yes
Data
(Player)
Erase Saved No
BD-ROM
Yes
Data (SD
Card)
Menus / Options
Setup
Description
Resets all the settings, except for
“Parental” to the factory default.
Re-formats SD card.
• Refer to page 45 for more information.
Re-formats local storage (Player)
used for BD-Java.
EN
Re-formats local storage (SD card)
used for BD-Java.
INTRODUCTION
CONNECTIONS
PLAYBACK
FUNCTION SETUP
OTHERS
EN
41
FUNCTION SETUP
TV Aspect
A “Custom”
[SETUP]
A
A “TV Aspect”
“Video”
Use this feature to adjust the aspect ratio of the video source which is different from your TV’s ratio to fit your TV monitor
without distorting the picture. Descriptions of each setting are as follows:
Video source
Your TV
4:3
Option
4:3 Letter Box
Description
To enjoy 16:9 picture on 4:3 monitor:
16:9 picture is scaled down until both sides of the picture fits the 4:3 TV.
4:3 Pan & Scan
To enjoy 16:9 picture on 4:3 monitor:
Both sides of the picture are trimmed to fit the 4:3 TV without distorting
the aspect ratio of the picture.
16:9 Wide
To enjoy 16:9 picture on 16:9 monitor:
Select this setting when you want to enjoy 16:9 picture on the 16:9 TV.
16:9 Squeeze
To enjoy 4:3 picture on 16:9 monitor:
Use this setting to display 4:3 picture on the 16:9 TV without distorting
the aspect ratio of the picture.
16:9
16:9
4:3
Audio Output
[SETUP] A “Custom”
A
“Audio”
A “Audio Output”
If you set to “Speakers” :
The audio output from the 5.1ch speakers differs depending on the audio source and the setting of surround mode.
(Refer to “Selecting Surround Mode” on page 33.)
If you set to “HDMI Normal” or “HDMI LPCM” :
Refer to the table below for the audio output from HDMI OUT jack.
“Audio Output” setting A
“BD Audio Mode” setting A
Media
ª
Audio Source
ª
Dolby Digital
Dolby Digital Plus
BD-video
Dolby TrueHD
42
“HDMI Normal”
“HDMI LPCM”
“HD Audio
“Mix Audio
“HD Audio
“Mix Audio
Output”
Output”
Output”
Output”
Which audio format can be output depends on the compatibility of the
connected device.
Dolby Digital
Dolby Digital
or
or
Multi LPCM
Multi LPCM
Multi LPCM
Multi LPCM
or
or
or
or
Mute
Mute
Mute
Mute
Dolby Digital Plus
or
Dolby Digital
Dolby Digital
or
or
Multi LPCM*1
Multi LPCM*1
Multi LPCM*1
Multi LPCM*1
or
or
or
or
Mute
Mute
Mute
Mute
Dolby TrueHD
or
Dolby Digital
Dolby Digital
or
or
Multi LPCM*2
Multi LPCM*2
Multi LPCM*2
Multi LPCM*2
or
or
or
or
Mute
Mute
Mute
Mute
EN
FUNCTION SETUP
“Audio Output” setting A
“BD Audio Mode” setting A
Media
ª
Audio Source
ª
DTS®
BD-video
DTS-HD®
Dolby Digital
DTS®
LPCM
Analog audio
FM
Analog audio
FUNCTION SETUP
External audio input
(AUX / MP3 LINE-IN)
PLAYBACK
External audio input
(DIGITAL AUDIO IN)
EN
CONNECTIONS
Dolby Digital
DTS®
LPCM
DTS-CD
DTS®
Audio CD
PCM
MP3
MP3
Windows Media™ Audio WMA
DVD-video
“HDMI LPCM”
INTRODUCTION
LPCM
“HDMI Normal”
“HD Audio
“Mix Audio
“HD Audio
“Mix Audio
Output”
Output”
Output”
Output”
Which audio format can be output depends on the compatibility of the
connected device.
DTS®
DTS®
or
or
Multi LPCM
Multi LPCM
Multi LPCM
Multi LPCM
or
or
or
or
Mute
Mute
Mute
Mute
DTS-HD®
or
DTS®
DTS®
or
or
Multi LPCM*3
Multi LPCM*3
Multi LPCM*3
Multi LPCM*3
or
or
or
or
Mute
Mute
Mute
Mute
Multi LPCM
Multi LPCM
Multi LPCM
Multi LPCM
or
or
or
or
Mute
Mute
Mute
Mute
Dolby Digital, Multi LPCM or Mute
Multi LPCM or Mute
DTS®, Multi LPCM or Mute
Multi LPCM or Mute
2ch LPCM or Mute
2ch LPCM or Mute
DTS®, Multi LPCM or Mute
Multi LPCM or Mute
2ch LPCM or Mute
2ch LPCM or Mute
2ch LPCM or Mute
2ch LPCM or Mute
2ch LPCM or Mute
2ch LPCM or Mute
Dolby Digital
or
Multi LPCM
Multi LPCM
or
or
Mute
Mute
DTS®
or
Multi LPCM
Multi LPCM
or
or
Mute
Mute
2ch LPCM
2ch LPCM
or
or
Mute
Mute
2ch LPCM
2ch LPCM
or
or
Mute
Mute
2ch LPCM
2ch LPCM
or
or
Mute
Mute
*1) Only the independent substream is decoded.
*2) Only the Dolby Digital substream is decoded.
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the
“HD Audio Output” even if the “BD Audio Mode” is set to “Mix Audio Output”.
• If you unplug the HDMI cable when “Audio Output” is set to “HDMI Normal” or “HDMI LPCM”, the audio will be output
from 5.1ch speakers.
EN
43
OTHERS
*3) Only the core substream is decoded.
FUNCTION SETUP
Parental
[SETUP]
HDMI CEC
A “Custom”
A “Parental”
Some BD-videos or DVD-videos feature a parental lock
level. Playback will stop if the ratings exceed the levels you
set, it will require you to enter a password before the disc
will play back. This feature prevents your children from
viewing inappropriate material.
1 Use [K / L] to select “
2
3
4
”, then press [OK].
• Password input field appears.
If a password has not been set, follow A).
If a password has already been set, follow B).
If you want to change the password, follow B) and
C).
If you forget the password, follow D).
A) Enter 4 digit password using
[the Number buttons].
• “4737” cannot be used.
B) Enter 4 digit password.
C) Select “Password Change”, then press [OK]. Enter
the new password.
D) Enter “4737”. Current password and “Parental”
settings are now cleared. Enter a new password.
Select the desired item to set the rating level for,
then press [OK].
Select the desired rating level, then press [OK].
<BD rating level>
All
Sets no limit.
Age Setting Allows you to enter the age to limit, and
prohibits the playback of a disc whose
rating level exceeds the age setting
entered here.
• Enter the age as a 3-digit-number.
(e.g., For age 15, enter [0], [1], [5].)
<DVD rating level>
All
8 [Adult]
7 [NC-17]
6 [R]
5 [PGR]
4 [PG-13]
3 [PG]
2 [G]
1 [Kid Safe]
Parental control is inactive; all discs can be
played back.
DVD software of any grades (adult /
general / children) can be played back.
No one under 17 admitted.
Restricted; under 17 requires
accompanying parent or adult guardian.
Parental Guidance Recommended.
Unsuitable for children under 13.
Parental Guidance suggested.
General audience.
Suitable for children.
[SETUP]
A “Custom”
A “Others”
A “HDMI CEC”
You can control all HDMI CEC compatible components
connected via an HDMI cable by simple button operations
of the remote control of this unit. In order to enable the
function, you need to set “HDMI CEC” to “On”.
One Touch Play
When the operations with following buttons of the remote
control of this unit are performed, the TV will automatically
be turned on and switched to the appropriate input
channel.
Buttons for one touch play:
- [B (play)], [H (skip)], [G (skip)],
[the Number buttons], [DISPLAY], [SETUP], or
[SOURCE ⴐ / ⴑ]
- [TOP MENU], or [POP MENU / MENU] (when a disc is
inserted in the unit)
Standby
When you press and hold [STANDBY/ON Q] for 2 seconds,
it turns off the power of the TV first and then turns off the
power of this unit.
When the connected HDMI CEC compatible display device
is turned off, this unit may also turn off together.
System Information
Get & Set Menu Language
The unit recognizes the OSD language set for the TV and
automatically sets the same language as the player menu
language (OSD menu language) for this unit.
• This feature is available only when “Auto (XXX)” is
selected in “Player Menu” in the setup menu. (Refer to
page 37.)
Note
• For external input mode, “One Touch Play” is not
available.
To Cancel Parental Lock Temporarily
Some discs allow you to cancel the parental lock
temporarily. With those discs, the message below will
appear when you try to play them back.
“Enter current password.”
Follow the instruction which appears on the TV screen to
cancel the parental lock.
44
EN
FUNCTION SETUP
Software Update
Initialize
Initialize the setting or SD Memory Card.
Current Version
You can confirm the current firmware version.
1
2
3
4
5
6
In stop mode, press [SETUP].
Use [K / L] to select , then press [OK].
Use [K / L] to select
1 In stop mode, press [SETUP].
2 Use [K / L] to select , then press [OK].
3 Use [K / L] to select a desired option, then press
[OK].
, then press [OK].
Note
• Please visit www.magnavox.com to download the
latest firmware version.
Disc Update
You can update the firmware by using disc.
4
6
Note
• The setting for “Parental” will not be reset.
Caution
• Do not remove the SD Memory Card while executing
the “Format SD Card” or the “Erase Saved BD-ROM
Data (SD Card)”. It damages the card.
OTHERS
Note
• You can check the current firmware version in
“Current Version” in “Software Update” menu.
• Please do not unplug the AC power cord while
executing “Disc Update”.
• All settings will remain the same even if you update
the firmware version.
EN
FUNCTION SETUP
5
• Confirmation message will appear.
Use [K / L] to select “Yes”, then press [OK].
• Disc tray will open automatically.
• Insert the firmware update disc created at step 1 and
then press [OPEN/CLOSE A].
After completing loading disc, confirmation
message will appear.
Use [s / B] to select “Yes” and press [OK] to start
updating.
• It may take a while to complete the updating.
After the disc update finishes, this unit will restart
and eject the disc automatically.
5
• Final confirmation message will appear. Select “Yes”,
then press [OK].
Press [SETUP] to exit.
PLAYBACK
2
3 Use [K / L] to select “Disc Update”, then press [OK].
4 Press [OK]. (For “Setup” and “Format SD Card” only)
CONNECTIONS
1 Prepare a firmware update disc:
INTRODUCTION
“Setup”:
Resets the setup menu to the default.
“Format SD Card”:
(Available only when an SD Memory Card is
inserted.):
Initializes the SD Memory Card. After confirmation
message appears, use [K / L] to select “Yes”, then
press [OK].
“Erase Saved BD-ROM Data (Player)”:
Clears the data saved for the BD-ROM contents, such
as BD-ROM game scores, from this player.
“Erase Saved BD-ROM Data (SD Card)”:
(Available only when an SD Memory Card is
inserted.):
Clears the supplemental data for the BD-ROM
playback, such as subtitle data, from the SD Memory
Card.
Use [K / L] to select “Software Update”, then press
[OK].
Use [K / L] to select “Current Version”, then press
[OK].
Press [OK] or [RETURN] to exit.
Please access www.magnavox.com, and download
the latest firmware to a blank disc by following the
direction described on the site.
• Use a blank disc and download one firmware per a
disc.
• For more details on how to download the firmware,
please refer to the site.
Follow steps 1 to 4 in “Current Version” on page 45.
EN
45
OTHERS
Troubleshooting
If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the
following checklist.
Problem
No power
No sound or picture
-
No audio / video signal on the
display device via HDMI cable
-
Distorted picture
-
Completely distorted picture
or black / white picture with
BD / DVD
No sound or distorted sound
No audio signal from the
loudspeakers of the TV
connected via an HDMI cable
No audio from the speaker
system
No 5.1-channel audio from the
speaker system
-
Picture freezes momentarily
during playback
Disc cannot be played back
SD Memory Card cannot be
read
No return to start-up screen
when disc is removed
The unit does not respond to
the remote control
Buttons do not work or the
unit stops responding
46
-
Solution
Check if the AC cord is properly connected.
Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.
Check if the connected TV is turned on.
Check if the connections are made securely and correctly.
Check whether the connected TV or other device supports HDCP. (This unit will not
output a video signal unless the other device supports HDCP.)
Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of other connected device.
If the unit is connected to the unauthorized display device with an HDMI cable, the
audio / video signal may not be output.
Perform an HDMI cable hotplug, wherein you disconnect the HDMI cable from the TV
and this unit and then reconnect it to both the devices while they are powered on.
Ensure that your HDMI cable is certified.
Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
Connect this unit directly to the TV. If the audio / video cables are connected to a
VCR, pictures may be distorted due to the copy right protection system.
Make sure the disc is compatible with this unit.
Adjust the volume.
Check the settings in “Audio” menu.
Set “Audio Output” to “HDMI Normal” or “HDMI LPCM” in the settings menu.
Ensure that the TV's speakers are turned on in the TV menu.
Ensure that the TV speakers are not muted.
Increase the volume level of the speaker system.
Set “Audio Output” to “Speakers” in the setup menu.
Make sure that audio is not muted.
Make sure you have selected the correct active source for external audio input.
Does the disc contain 5.1-channel audio?
The 5.1-channel audio is not available when the disc does not contain it.
Set “Audio Output” to “Speakers” in the setup menu.
Make sure that the surround mode is not set to “2.1ch Stereo”.
When listening to a stereo (2 channel) source, press [SURROUND] and select
“Dolby Pro Logic II Music” or “Dolby Pro Logic II Movie” to upmix the stereo source
to 5.1 channel surround.
Check the disc for fingerprints / scratches and clean with a soft cloth wiping from
center to edge.
Clean the disc.
Clean the disc.
Ensure the disc label is facing up.
Check if the disc is defective by trying another disc.
Cancel the ratings control or change the control level.
Insert a correct disc that can be played back on this unit.
The format of the card does not match that accepted by this unit or the card is not
compatible.
Reset this unit by turning it off, then on again.
Aim the remote control directly at infrared sensor window on the front panel.
Reduce the distance to infrared sensor window.
Replace the batteries in the remote control.
Re-insert the batteries with their polarities (+ / - signs) as indicated.
To completely reset the unit, press and hold [STANDBY/ON Q] on the front panel
for 10 seconds to shut down the unit or unplug the AC cord from the AC outlet for
15-20 seconds.
EN
OTHERS
Problem
The unit does not respond to
some operating commands
during playback
The unit cannot read BD /
DVD/ CD
Angle does not switch
Playback does not start when
the title is selected
The password for rating level
has been forgotten
Radio reception is poor
Solution
- Operations may not be permitted by the disc.
Refer to the instructions of the disc.
- Condensation? (Let sit 1 or 2 hours)
- You are attempting to playback a disc other than one with one of the Logos on
page 18.
- Wipe the dirt off the disc or replace the disc.
- The angle cannot be switched for BD / DVD which do not contain multiple angles.
In some cases multiple angles are only recorded for specific scenes.
- Check the settings in “Parental” menu.
- Enter the default password “4737”, then your forgotten password will be cleared.
INTRODUCTION
- If the signal is too weak, adjust the antenna or connect an external antenna for
better reception.
- Increase the distance between this unit and your TV or VCR.
- Tune in to the correct frequency.
- Place the antenna further away from any equipment that may be causing the
interference.
Note
CONNECTIONS
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this
manual for details on correct operations.
• Some functions are prohibited on some discs.
Glossary
Chapter
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.
Just as a book is split up into several chapters, a title on a
BD-video or DVD-video is usually divided into chapters.
See also “Title”.
Component Video Output
Aspect Ratio
Each signal of luminance (Y) and component (PB/CB, PR/CR)
is independent to output so that you can experience
picture Color as it is.
Also, due to compatibility with progressive video (525p/
480p), you can experience higher-density picture than that
in interlace (525i/480i).
BD-Java
With some BD which support Java applications, you can
enjoy the interactive functions such as games or
interactive menus.
Blu-ray Disc is a next generation optical video disc which is
capable of storing much more data than a conventional
DVD is. The large capacity makes it possible to benefit
from the features such as high-definition videos, multichannel surround sounds, interactive menus and so on.
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-todigital converter, generating a stream of numbers. On
playback, a digital-to-analog converter generates an
analog signal based on these numbers. See also “Sampling
Frequency” and “Analog Audio”.
47
OTHERS
Blu-ray Disc (BD)
Digital Audio
FUNCTION SETUP
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen is
almost square); widescreen models are 16:9 (the TV screen
is almost twice as wide as it is high).
PLAYBACK
Analog Audio
EN
EN
OTHERS
Dolby Digital
Region Code
The system to compress digital sound developed by Dolby
Laboratories. It offers you sound of stereo (2ch) or multichannel audio.
Regions associate discs and players with particular areas of
the world. This unit will only play back discs that have
compatible region codes. You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Dolby Digital Plus
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital. Blu-ray Disc supports 7.1 multi-channel
surround sound output.
Dolby Pro Logic II
Dolby Pro Logic II technology processes any high quality
stereo (two-channel) movie and music audio into five
playback channels of full-bandwidth surround sound.
A matrix surround decoding technology, Dolby Pro Logic II
detects the directional cues that occur naturally in stereo
content and uses these elements to create a five-channel
surround sound playback experience.
Dolby TrueHD
Dolby TrueHD is a lossless coding technology developed
for next generation optical discs. Blu-ray Disc supports 7.1
multi-channel surround sound output.
DTS® (Digital Theater System)
DTS® is a multi-channel surround sound system. By
connecting to DTS decoder, you can enjoy movie dynamic
and realistic sound like movie theater. DTS surround
sound technologies were developed by DTS, Inc.
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling in
one second defines as sampling frequency. The higher the
rate, the better the sound quality.
Title
A collection of chapters on BD-video or DVD-video. See
also “Chapter”.
Track
Audio CD use tracks to divide up the content of a disc. The
BD-video or DVD-video equivalent is called a chapter. See
also “Chapter”.
Windows Media™ Audio
Windows Media™ Audio is the audio compressing
technology developed by Microsoft. You can copy
Windows Media™ Audio files on BD-RE/-R, DVD-RW/-R,
CD-RW/-R or SD Memory Card from a computer and play
them back on this unit.
DTS-HD®
DTS-HD® is a lossless coding technology developed as an
extension of the original DTS Coherent Acoustics format.
Blu-ray Disc supports 7.1 multi-channel surround sound
output.
HDMI (High-Definition Multimedia Interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.
JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still picture files. You can
copy JPEG files on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD
Memory Card from a computer and play back the files in
this unit.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory
Card from the computer and play back the files on this
unit.
PCM (Pulse Code Modulation)
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality that requires a lot
of data compared to formats such as Dolby Digital and
MPEG audio. For compatibility with digital audio recorders
(CD, MD and DAT) and AV amplifiers with digital inputs,
this unit can convert Dolby Digital, DTS, and MPEG audio
to PCM. See also “Digital Audio”.
48
EN
OTHERS
Language Code List
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
F-H
Faroese
Fiji
Finnish [FIN]
5261
5256
5255
Language
Code
Language
Code
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
Slovak [SLO]
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
6565
6557
6558
6561
5165
6567
6569
6568
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5861
5847
5868
5860
5866
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
O-R
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese
[POR]
Quechua
RhaetoRomance
Romanian
[RUM]
Russian [RUS]
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
OTHERS
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
6149
6164
6159
6247
6265
5247
6258
6266
Note
• If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every
time you change the audio or subtitle language setting on page 31. If you choose any other languages, “---” will be
displayed instead.
EN
EN
FUNCTION SETUP
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Code
PLAYBACK
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian [BUL]
Burmese
Byelorussian
Language
CONNECTIONS
Code
INTRODUCTION
Language
49
OTHERS
Specifications
Signal system
Power requirements
Power consumption
Total output power (Amplifier)
Dimensions (width x height x depth)
Weight
Operating temperature
Operating humidity
General
NTSC Color
120 V AC, 60 Hz
70 W (standby: 0.6 W)
Home theater mode: 1000 W
FTC* output power : 700 W
*(Main Ch @ 1 kHz within 10% THD, Sub Ch 60 Hz within 2.5% THD)
17.2 x 2.4 x 11.7 inches (435 x 59 x 297 mm)
Total weight: 27.56 lbs. (12.50 kg)
Main unit: 8.16 lbs. (3.70 kg)
41°F (5°C) to 104°F (40°C)
Less than 80 % (no condensation)
500 mVp-p (75Ω)
System: Full range satellite
Impedance: 4Ω
Frequency response: 180 Hz ~ 20 kHz
Dimensions: 3.9 x 5.1 x 4.0 inches (100 x 130 x 100.5 mm)
Weight: front - 1.19 lbs. (0.54 kg)
rear - 1.13 lbs. (0.51 kg)
Center speaker
System: Full range satellite
Impedance: 4Ω
Frequency response: 180 Hz ~ 20 kHz
Dimensions: 3.9 x 5.1 x 4.0 inches (100 x 130 x 100.5 mm)
Weight: 1.61 lbs. (0.73 kg)
Subwoofer
Impedance: 4Ω
Speaker drivers: 6.5 inches (160 mm) woofer
Frequency response: 60 Hz ~ 150 Hz
Dimensions: 5.9 x 12.2 x 12.1 inches (149.5 x 310.5 x 308 mm)
Weight: 8.29 lbs. (3.76 kg)
Rear
Front
Terminals
SD card slot
slot x 1
MP3 LINE-IN jack
mini jack x 1
Analog audio output
(SPEAKERS (4Ω))
Front and rear speakers
Video output
RCA jack x 1
Component video output
RCA jack x 3
Analog audio input
(AUX)
RCA jack x 2
Digital audio input (Coaxial)
RCA jack x 1
HDMI output
HDMI jack x 1
RADIO
FM ANT 75Ω jack × 1
1 Vp-p (75Ω)
Y: 1 Vp-p (75Ω)
PB: 700 mVp-p (75Ω)
PR: 700 mVp-p (75Ω)
L/R:2 Vrms (47kΩ)
500 mVp-p (75Ω)
Video: 480p, 720p, 1080i, 1080p, 1080p24 / Audio
Tuning range: FM 87.5 - 108 MHz (100kHz)
Antenna terminal: 75Ω (unbalanced)
Note
• The specifications and design of this product are subject to change without notice.
50
EN
OTHERS
Maintenance
Servicing
• Please refer to relevant topics on “Troubleshooting” on
page 46 before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn the unit to the standby mode, unplug the
power plug, and please contact 1-800-605-8610 or visit :
www.magnavox.com/support
IR signal check
• If the remote control is not working properly, you can use
a digital camera (including a cellular phone with built-in
camera) to see if it is sending out an infrared signal.
With a digital camera
(including built-in cell phone cameras):
Point a digital camera towards the
remote control. Push any button on the
remote control and look through the
digital camera. If the infrared light
appears through the camera, the remote
control is working.
CONNECTIONS
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
EN
INTRODUCTION
Cleaning the cabinet
• Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean
the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the
unit.
Disc handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not
used.
• Note that discs with special shapes (heart-shaped discs,
octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to playback such discs, as they may
damage the unit.
Cleaning the disc lens
• If this unit still does not perform properly although you
refer to the relevant sections and to “Troubleshooting” in
this manual, the laser optical pickup unit may be dirty.
Consult your dealer or an authorized service center for
inspection and cleaning of the laser optical pickup unit.
PLAYBACK
FUNCTION SETUP
OTHERS
EN
51
LIMITED WARRANTY LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship
as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any
product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI SERVICE CORPORATION
Tel: 1-800-605-8610
www.magnavox.com/support
2200 Spiegel Drive Groveport, OH 43125
E1S10UD
1VMN29273 (((((
Printed in China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising