Topic: WiFi in Apple iOS via eduroam

Topic: WiFi in Apple iOS via eduroam
Informations- und Kommunikationstechnologie
E-Learning Service
________________________________________________________________
Guideline for WiFi
(State 8/2013)
Topic: WiFi in Apple iOS via eduroam
Requirements
Your device needs a firmware version of 2.0.2 or higher.
Step 1: Open Settings
Open the menu and choose the Settings. Then,
select the Wi-Fi settings.
Step 2: Choose network
Activate the WiFi connection if necessary and
select the eduroam network.
1
Informations- und Kommunikationstechnologie
E-Learning Service
________________________________________________________________
Step 3: Enter credentials
Enter your credentials here. To your HWR account
name, please add the domain “@hwr-berlin.de”.
Example: HWR account: „s_primus“
„s_primus@hwr-berlin.de”
Username:
Attention: The domain „hwr-berlin.de“ is the same
for all users. There is no „stud.hwr-berlin.de“.
Confirm the credentials by clicking Connect. The
connection will be established.
Hint: In case you are asked for a password only
but not for a username in this dialogue, you have
to reset the network settings via Settings
General
Reset
Reset Network Settings. Please note that by doing this,
you will also lose connection information for other WiFi networks (e.g. home
network).
Step 4: Accept Certificate
After successful input of your credentials, you have
to Accept the HWR certificate.
If everything worked out properly, a check mark
will appear next to the eduroam network entry.
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising