WIFI-FHD Digital Sports Camera Trademarks All brand and product

WIFI-FHD Digital Sports Camera Trademarks All brand and product
WIFI-FHD Digital Sports Camera
Trademarks
All brand and product names are trademarks or registered
trademarks of Maka GPS Technologies Group. In association with
Maka GPS Technologies Private Limited (Singapore), Maka GPS
Technologies Sdn. Bhd. (Malaysia), Maka Technologies Group
(H.K.) Limited. and Maka Corporation USA Inc.
The information in this manual is subject to change without notice.
www.makagps.com
4/2016. R1.1
1
© 2016 Maka Technologies Group. All Rights Reserved.
Safety information
To prevent injury to yourself and others or damage to your device, read the
safety information about your device before using the device.
Warning
Failure to comply with safety warnings and regulations can cause serious
injury or death.
Do not use damaged power cords or plugs, or loose electrical sockets
Unsecured connections can cause electric shock or fire.
Do not touch the car charger with wet hands or disconnect the charger by
pulling the cord
Doing so may result in electrocution.
Do not bend or damage the car charger
Doing so may cause electric shock or fire.
Do not use your device while it is charging or touch your device with wet
hands
Doing so may cause electric shock.
Do not short-circuit the charger or the device
Doing so may cause electric shock or fire, or the battery may malfunction or
explode.
2
© 2016 Maka Technologies Group. All Rights Reserved.
Use manufacturer-approved batteries, chargers, accessories, and
supplies
Using generic batteries or chargers may shorten the life of your device or
cause the device to malfunction. They may also cause a fire or cause the
battery to explode.
Use only Maka GPS Technologies Group-approved battery and charger
specifically designed for your device. Incompatible battery and charger can
cause serious injuries or damage to your device.
Maka GPS Technologies Group will not be responsible for the user’s safety
when using accessories or supplies that are not approved by Maka GPS
Technologies Group.
Do not drop or cause an impact to the charger or the device.
Handle and dispose of the device and charger with care
Never dispose of the battery or device in a fire. Never place the battery or
device on or in heating devices, such as microwave ovens, stoves, or
radiators. The device may explode when overheated. Follow all local
regulations when disposing of used battery or device.
Never crush or puncture the device.
Avoid exposing the device to high external pressure, which can lead to an
internal short circuit and overheating.
Protect the device, battery and charger from damage
Avoid exposing your device and battery to very cold or very hot
temperatures.
Extreme temperatures can damage the device and reduce the charging
capacity and life of your device and battery.
3
© 2016 Maka Technologies Group. All Rights Reserved.
Prevent the battery from coming into contact with metal objects, as this can
create a connection between the + and – terminals of your battery and lead
to temporary or permanent battery damage.
Never use a damaged charger or battery.
Do not bite or suck the device or the battery
Doing so may damage the device or result in an explosion or fire. • Children
or animals can choke on small parts.
If children use the device, make sure that they use the device properly.
Do not handle a damaged or leaking Lithium Ion (Li-Ion) battery
For safe disposal of your Li-Ion battery, contact your nearest authorised service
centre
4
© 2016 Maka Technologies Group. All Rights Reserved.
Caution
Failure to comply with safety cautions and regulations can cause injury or
property damage
Do not use your device near other electronic devices
Most electronic devices use radio frequency signals. Your device may interfere
with other electronic devices.
Do not expose the device to heavy smoke or fumes
Doing so may damage the outside of the device or cause it to malfunction.
Do not use your device near devices or apparatuses that emit radio
frequencies, such as sound systems or radio towers
Radio frequencies may cause your device to malfunction.
If you notice strange smells or sounds coming from your device or the
battery, or if you see smoke or liquids leaking from the device or battery,
stop using the device immediately and take it to a Maka Service Centre
Failure to do so may result in fire or explosion.
For your own safety, do not operate the controls of the product while
driving.
Two window mounts are needed when using the recorder in a car. Make sure
that you place the recorder in an appropriate place, so as not to obstruct the
driver’s view.
Make sure that no object is blocking the camera lens and no reflective
material appears near the lens.
Please keep the lens clean. If the car’s windscreen is tinted with a dark solar
film coating, it may affect the recording quality..
5
© 2016 Maka Technologies Group. All Rights Reserved.
Do not store your device in very hot or very cold areas. It is recommended
to use your device at temperatures from 0 °C to60 °C and humidity from
10% to 80%
Doing so may cause the screen to malfunction, result in damage to the device,
or cause the battery to explode.
Do not use your device or applications for a while if the device is
overheated
Prolonged exposure of your skin to an overheated device may cause low
temperature burn symptoms, such as red spots and pigmentation.
Install mobile devices and equipment with caution
Ensure that any mobile devices or related equipment installed in your
vehicle are securely mounted.
Avoid placing your device and accessories near or in an airbag deployment
area. Improperly installed wired equipment can cause serious injury when
airbags inflate rapidly.
Do not drop your device or cause impacts to your device
Your device may be damaged or may malfunction.
If bent or deformed, your device may be damaged or parts may malfunction.
Ensure maximum battery and charger life
Avoid charging your device for more than a week, as overcharging may
shorten battery life.
Over time, unused device will discharge and must be recharged before use.
Disconnect the charger from power sources when not in use.
6
© 2016 Maka Technologies Group. All Rights Reserved.
Leaving batteries unused over time may reduce their lifespan and
performance. It may also cause the batteries to malfunction or explode, or
cause a fire.
Your device may wear out over time. Some parts and repairs are covered
by the warranty within the validity period, but damages or deterioration
caused by using unapproved accessories are not.
Do not disassemble, modify, or repair your device
Any changes or modifications to your device can void your manufacturer’s
warranty. If your device needs servicing, take your device to an
authorised Maka Service Centre and Manufacturer Authorised Service
Personnel (MASP).
Do not disassemble or puncture the battery, as this can cause explosion or
fire.
Turn off the device before removing the battery. If you remove the battery
with the device turned on, it may cause the device to malfunction.
When cleaning your device, mind the following
Wipe your device or charger with a towel or an eraser.
Do not use chemicals or detergents. Doing so may discolour or corrode the
outside the device or may result in electric shock or fire.
Do not distribute copyright-protected material
Do not distribute copyright-protected material without the permission of the
content owners. Doing this may violate copyright laws. The manufacturer is not
liable for any legal issues caused by the user’s illegal use of copyrighted
material.
7
© 2016 Maka Technologies Group. All Rights Reserved.
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product
and its electronic accessories (e.g. charger, headset, USB cable) should not be
disposed of with other household waste.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of
waste and recycle them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can
take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product and its electronic accessories should not
be mixed with other commercial wastes for disposal.
8
© 2016 Maka Technologies Group. All Rights Reserved.
Disclaimer
Some content and services accessible through this device belong to third
parties and are protected by copyright, patent, trademark and/or other
intellectual property laws. Such content and services are provided solely for
your personal non-commercial use.
You may not use any content or services in a manner that has not been
authorised by the content owner or service provider. Without limiting the
foregoing, unless expressly authorised by the applicable content owner or
service provider, you may not modify, copy, republish, upload, post, transmit,
translate, sell, create derivative works, exploit, or distribute in any manner or
medium any content or services displayed through this device .
“THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” MAKA GPS
TECHNOLOGIES GROUP DOES NOT WARRANT CONTENT OR SERVICES SO
PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE. MAKA
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO, WA RRANTIES O F MERCHANTABILITY OR FIT NESS FO R A
PARTICULAR PURPOSE. MAKA GPS TECHNOLOGIES GROUP DOES NOT
G UA RA NTE E THE AC CU RA CY, VAL I DI TY, TIME LI NES S, LE GA LITY, O R
COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH
THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE,
SHALL MAKA GPS TECHNOLOGIES GROUP BE LIABLE, WHETHER IN CONTRACT
O R T O RT, FO R A N Y D IRE C T, I N DI R E C T, I N C I D E NTA L, S PE CI A L O R
CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER
DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION
CONTAINED IN, OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY
YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.”
9
© 2016 Maka Technologies Group. All Rights Reserved.
Third party services may be terminated or interrupted at any time, and Maka
GPS Technologies Group makes no representation or warranty that any
content or service will remain available for any period of time. Content and
services are transmitted by third parties by means of networks and
transmission facilities over which Maka GPS Technologies Group has no
control. Without limiting the generality of this disclaimer, Maka GPS
Technologies Group expressly disclaims any responsibility or liability for any
interruption or suspension of any content or service made available through this
device.
Maka GPS Technologies Group is neither responsible nor liable for customer
service related to the content and services. Any question or request for service
relating to the content or services should be made directly to the respective
content and service providers.
10
© 2016 Maka Technologies Group. All Rights Reserved.
About this manual
This device provides high quality digital recording device using Maka’s high
standards and technological expertise. This user manual is specially designed to
detail the device’s functions and features.
Please read this manual before using the device to ensure safe and
proper use. Descriptions are based on the device’s default settings.
Images and screenshots may differ in appearance from the actual product.
Content may differ from the final product, or from software provided by
service providers and is subject to change without prior notice.
For the latest version of the manual, refer to the Maka website at
www.makagps.com.
Available features and additional services may vary by device, software.
Applications and their functions may vary by country, region, or hardware
specifications.
Maka is not liable for performance issues caused by applications from any
provider other than Maka.
Maka is not liable for performance issues or incompatibilities caused by not
installing the device as stated in this manual. Attempting to customize the
installation may cause the device or applications to work improperly. This
may result in device malfunctions and data corruption or loss. These actions
are violations of your Maka agreement and will void your warranty.
Default applications that come with the device are subject to updates and
may no longer be supported without prior notice. If you have questions
about an application provided with the device, contact Maka Service Centre.
11
© 2016 Maka Technologies Group. All Rights Reserved.
Table of Contents
1. Accessories list………………………………..……………………………13
2. General Precautions…………………...…………………………………....14-15
3. Introduction………………………………………………………………...16
4. Specification………………………………………………………………..17
5. Feature……………………………………………………………………...18-23
6. SD card installation/format………………………………………………....23-25
7. Camera Start up / Shut Down…………………....………………………… 25
8. Battery Installation……………………………………………………….…26
9. Battery charge……………………………………………………………….26
10. Mode Switch…………………………………………………………….…26
11. Settings………………………………………………………………….….27-42
11.1 Driving Recorder………………………………………………..27-32
11.1 Video Resolution………………………………………………..27-32
11.2 Looping Video…….………………………………………….....32-36
11.3 Time Stamp….………………………………………………….36-40
11.4 Exposure…………………………………………………...……41-42
11.5 Photo Resolution..………………………………………………41-42
11.6 Burst Photo………………………………………………...……41-42
11.7 Photo Interval……………………………………………...……41-42
11.1 Time Lapse (Photography).……………………………………..27-32
11.8 Continuous lapse..………………………………………………41-42
11.9 Power Frequency..………………………………………………41-42
11.10 Language...………………………………………………………41-42
11.11 Date/Time..………………………………………………………41-42
11.12 Sound Indicator.…………………………………………………41-42
11.13 Upside Down….…………………………………………………41-42
11.14 Screen Saver….…………………………………………….……41-42
11.15 Power Saver…..……………………………………………….…41-42
11.16 Reset…………...…………………………………………………41-42
12. Recording Playback Function………………………………………………42-43
13. Photography Viewback Function……………………………………………43
14. Manual file deletion…………………………………………………………44
14. Wifi Connection………………………….………………………………….44
16. Troubleshooting……………………………………………………………..44-45
12
© 2016 Maka Technologies Group. All Rights Reserved.
Accessories List
USB Data Cable
(For Charging and
Data Transfer)
Long Connector
with Screw
Short Connector
with Screw Type 1
Quick Release
Buckle with
Screw
Curved/Flat
Adhesive Mount
Bike Helmet
Bandage
Curve Release
Buckle
Adaptor
Connector
Short Connector
with Screw Type 2
Bike Roll Bar
Mount ( include
fixing screw)
Waterproof
Housing with
Device
Battery
(900mAh)
Operating Manual
Lens Cloth
13
© 2016 Maka Technologies Group. All Rights Reserved.
General Precautions
Please use this camera in accordance with the following security measures
to avoid damage.
Keep away from
fire or extreme
heat source
Keep away from
water
Do not Dismantle
Do not
Percussion
MicroSD Card
Device Charging
Battery
Do not use camera in hot environment. High
temperatures can deform the camera casing, causing
damage to the internal electronic components and
possibly making the camera malfunction.
Do not use camera near water. Any liquid into camera can
make electronic short circuit and even cause damage for
the camera.
Using of waterproof housing in any of the water
environment.
Do not dismantle the camera because it may lead to
damage and directly affect your warranty rights and
interests.
Do not drop or knock the machine intensely. Rough
handling will cause damage to the product components.
Using of specific MicroSD Card provided. Other types of
SD card used cannot be guaranteed to be normal
operation of the camera.
Do not store MicroSD card in or near to any intense
magnetic place in case of the storage data loss.
Inserting other small object into the SD card slot could
cause malfunction and damage the camera.
Do not use any unknown charger charging the camera.
Any non-authorize charger used may cause damage to
the camera component, probably permanent damage.
It will lead to rapid heating or even burning because of
using a non-authorize charger.
During charging process, please stop charging and
unplug the power immediately if notice in an event of
overheating, smoke, or odor in order to avoid any risk of
fire.
Do not use any non-authorize brands and types of
battery. It may cause damage or malfunction to the
14
© 2016 Maka Technologies Group. All Rights Reserved.
USB cable
Exception
handling
Safe storage
Keep away from
magnetic fields
camera or even cause a fire.
Do not modified or cut, pull hard or heavy compression on
the USB cable. It may cause damage to the USB cable.
Any strange sound, smell, abnormal heating, please
immediately remove the battery, unplug the USB cable
and inform your distributor for advised.
Do not keep the camera near extreme temperatures or
expose to direct sunlight. Please keep it in a cool, dry
environment for storage.
Do not place the camera near anything having strong
magnetic, such as magnets and motors. Also avoid using
the camera near anything emitting strong radio waves
and strong magnetic fields, which may cause product
failure, or damage the image and sound.
15
© 2016 Maka Technologies Group. All Rights Reserved.
3, Introduction







This camera is a type of high-end full HD sports camera,
which meet marketing demand and also it has the
industry-leading functions like digital video, photographs,
timing photography during video, video display, playback,
inverted photography, and document protection. 30m
waterproof water housing makes it more convenient for
taking wonderful video on and in the water.
Ultra-high-definition display can show clear photo effect
in video or playback.
Battery removable makes it easy to replace and prolong
usage life.
170 degrees A + grade high-resolution wide-angle lens
and HDMI high-definition output function.
Supports up to 32G memory card
Support recording video with different resolution, format
like 1080P, 720P and photograph mode like single shot,
continuous shooting, autodyne and timing photography.
It fulfills various function like driving record, outdoor
sports, home security, underwater recording etc. It meets
the photograph and video function at any place and at
any time.
16
© 2016 Maka Technologies Group. All Rights Reserved.
4、Specification
LCD Screen
Light Sensor
Solution/Sensor
Lens
WIFI
Language
Video Resolution
Video Format
Video compression formats
Photo resolution
Memory Card
Photo mode
Light frequency
USB
Power supply
Battery capacity
Charging time (shutdown
status)
Operating System (OS)
Dimensions
Weight
2.0’’ 320*240 LCD(dedicated outdoor products)
3MP CMOS Sensor
SPCA6330A/OV2710 (Omnivision)
170 degree FOV with A+ grade high resolution
Yes
Simplified Chinese, Traditional Chinese, English
1080FHD (1920*1080 30FPS )
720P
(1280*720
60FPS)
MOV
H.264
12M/8M/5M/2M
Micro SD 32GB(Class 6 an above)
single shot, continuous shooting, autodyne and
timing photography
50Hz/60Hz/Auto
USB2.0
5V (recommended charging power supply of 1A
during operating mode)
900MAH
3.5H(5V0.5A)
Microsoft windows XP/Vista/7/8 and above,
Mac6.0 and above
L59*W41* H30
45g (without battry)
60g(with battery)
110g (with battery and waterproof casing)
17
© 2016 Maka Technologies Group. All Rights Reserved.
5、Feature
The Front/Left and right side(with lens)
No.
Name
Function / Description
1
Mode
button/Power
On/Off button
2
Shooting Button
3
Up Button
1.
2.
3.
1.
2.
3.
1.
2.
3.
4
Down button
1.
2.
3.
4.
Switch on/ off ( long press for 3 to 5 seconds)
Menu button to toggle mode and setting
Exit button when entering into wrong setting
Recording Button
Confirm/Enter Button
Shooting Button
Selection button
4x Zoom-in Button when recording/Photoshot
(long press 2 to 3sec) follow by normal press to
zoom upon seeing the zoom icon appear
Playback/photo view button (quick press to
enter)
Selection button
Wifi on/off connection button
4x Zoom-out Button when recording/Photoshot
(long press 2 to 3sec) follow by normal press to
zoom upon seeing the zoom icon
Photo capture button during recording
18
© 2016 Maka Technologies Group. All Rights Reserved.
5
Lighting Indicator
Led
1.
2.
6
Lens
1.
7
SD card slot
8
USB Socket
Screen
capture
during
recording
and
photography
*Always keep the lens clean for clear quality
Please switch off the camera before insert the SD
card then play the camera.
1.
2.
9
HDMI
1.
2.
10
Light Indicator
LED
Red light without flasing indicate device on
Red light blinking indicate recording start
1.
2.
Insert USB cable into the socket for charging by
connecting with computer or power source
Check video and photo file by connecting
directly with computer
Using
an
HDMI cable can
transmit
uncompressed audio and video signals,
ensuring high-quality audio and video signal
transmission.
Check video and photo file by connecting
directly with computer
Blue light when in charging mode and recording
off
Blue light off when recording start
19
© 2016 Maka Technologies Group. All Rights Reserved.
Introduction for symbols shown
No.
1
Name
Mode
Function description
Current mode
Recording icon will be in Red
Record mode
2
Capacity
3
Capacity
Video capacity
Video balance
capacity
4
Current mode
5
Capacity
6
Capacity
7
Current mode
Time shown are recording
duration taken
Balance of the Sd card
capacity to record
Photo taking
Photo mode
8
Current mode
9
10
Battery
power
display
Resolution
11
Resolution
photo capacity
photo balance
capacity
Burst mode
Timer mode
power display
video resolution
photo resolution
Numbers shown are total
quantity of photo taken
Number shown are balance
of Sd card capacity can take
Continuous taking for
shoot
Time set for delay shoot
1
The remaining battery
capacity
1080P full HD mode make
video more clear
Higher resolution, more clear
photo
20
© 2016 Maka Technologies Group. All Rights Reserved.
6、SD Installation
Your device accepts memory cards with maximum capacities of 32 GB.
Depending on the memory card manufacturer and type, some memory cards
may not be compatible with your device.
Some memory cards may not be fully compatible with the device. Using an
incompatible card may damage the device or the memory card, or corrupt the
data stored in it.
Use caution to insert the memory card right-side up as shown in the image
below.
It is recommended to reformat a memory card every time images are
transferred from it to a computer, or at least once a month
Reformatting a memory card keeps future data and the structure of files stored
on it clean, helping to prevent error messages and missing images.
Reformatting also restores the memory card, which can prevent it from
becoming corrupted.
Removing the memory card
Before removing the memory card, first unmounts it for safe removal.
21
© 2016 Maka Technologies Group. All Rights Reserved.
On the device
1 Press on the Shooting Button to stop the device from recording
2 Press on the
MENU (On/Off) button to switch off the device
3 Pull out the memory card only until device fully shut down.
Do not remove the memory card while the device is transferring or accessing
information. Doing so can cause data to be lost or corrupted or damage to the
memory card or device. Maka GPS Technologies Group is not responsible for
losses that result from the misuse of damaged memory cards, including the loss
of data.
Formatting the memory card
You may choose to format your memory card on a computer or on the device.
On the device
1. Press on Shooting Button to stop the device from recording
2. Press on the MENU button
3. Press on MENU button to navigate to the function that shows
System
Setting
4. Press on Shooting Button to enter follow by MENU button, UP or Down
button to navigate to the function Format.
5. Press Shooting button to enter and UP/Down button to navigate
and press again Shooting button to confirm.
Before formatting the memory card, remember to make backup copies of all
important data stored on the device. The manufacturer’s warranty does not
cover loss of data resulting from user actions.
22
© 2016 Maka Technologies Group. All Rights Reserved.
7、Camera start up and shut down
Press and hold the Power button for a few seconds (3-5 sec) to turn on the
device. A welcome message will be displayed on screen as shown in the
image below.
To turn off the device, press and hold the Power button for a few seconds (3-5
sec) again to turn off the device. A goodbye message will be displayed on
screen as shown in the image below.
Curve Xtreme50 FHD WIFI Digital RoadcorderTM will be switch on and off
automatically if you have permanently connected it to the car charger.
8、Battery installation
a. Pull the battery cover forward to open
b. According to the signs marking for positive and negative
and the direction of the arrow, place the battery into the
camera rightly.
c. The battery power indicator: please refer to the icon display
on the bottom left of the screen.
d. Pull out the cover then can take the battery out.
23
© 2016 Maka Technologies Group. All Rights Reserved.
9、Battery charging
a. Install the battery into the camera.
b. Connect the camera with computer through data cable.
c. Connect the camera with the power adapter by getting
through power supply.
a、Long press the power button for 3~5 seconds for startup
b. Long press the power button for 3~5 seconds for shutdown
c. Indicator lights and LCD screen on means cameras are
power on and also get directly into video recording mode.
d. Indicator lights and LCD screen off means camera are
power off.
10. Mode Switch
Press the mode button when camera power on
11. Setting
Press MENU button to get into the mode setting interface
when camera power on. Then press Shoot button to enter. There
are 18 type of setting as shown below
24
© 2016 Maka Technologies Group. All Rights Reserved.
11.1 Driving Recorder
11.1.1 Press MENU or UP/Down button to select driving
recorder once get into setting interface.
11.1.2 Press Shooting button to select and confirm the
Yes/No
11.1.3 Press Menu or UP/Down button to select and
Shooting button to confirm and exit into setting interface.
11.2 Resolution setting
11.2.1 Press MENU or UP/Down button to select video
resolution once get into setting interface.
11.2.2 Press Shooting button to select and confirm the
video resolution.
,
11.1.3 When setting finished, press Shoot button to
confirm and return to the main setting interface
11.3 Loop Video setting
11.3.1 Press MENU or UP/Down button to select looping
video once get into setting interface
11.3.2 Press Shoot button to confirm and enter for
selection
11.3.3 Press MENU or UP/Down button to select looping
25
© 2016 Maka Technologies Group. All Rights Reserved.
time preferred
11.3.4 Press Shooting button to confirm the video cycle
time choose (Off, 2 minutes, 3 minutes, 5 minutes, 10
minutes) and exit to setting interface
11.4 Time Stamp
11.4.1 Press MENU or UP/Down button to select Time
Stamp once get into setting interface
11.4.2 Press Shoot button to confirm and enter for
selection
11.4.3 Press MENU or UP/Down button to select Date,
Time or Both
11.4.4 Press Shooting button to confirm selection for
video/photo to stamp with selection when in use
11.5
Exposure
11.5.1 Press MENU or UP/Down button to select Time
Stamp once get into setting interface
11.5.2 Press Shoot button to confirm and enter for
selection
11.5.3 Press MENU, UP/Down button to select exposure
compensation (Brightess +2 to Dark -2)
11.5.4 Press Shooting button to confirm the exposure
compensation data and exit to setting interface
26
© 2016 Maka Technologies Group. All Rights Reserved.
11.6 Photo resolution
11.5.1 Press MENU or UP/Down button to select Time
Stamp once get into setting interface
11.5.2 Press Shoot button to confirm and enter for
selection
11.5.3 Press MENU, UP/Down button to select resolution
for photo preferred (2M, 5M, 8M, 12M)
11.5.4 Press Shooting button to select and exit to setting
interface
11.7 Burst Photo – For usage during mode
This mode of usage will have 3 burst of photo taken when
pressing once Shoot button
11.8 Time Lapse – For usage during mode
This mode of usage will have selection of time delay before
each photo taken.
11.8.1 Press MENU or UP/Down button to select Time
Lapse once get into setting interface
11.5.2 Press Shoot button to confirm and enter for
selection
11.5.3 Press MENU, UP/Down button to select time lapse
for photo to be taken preferred (2s,3s,5s,10s,20s,30s,60s)
and exit back into setting interface
27
© 2016 Maka Technologies Group. All Rights Reserved.
11.9 Continuous lapse - For usage during mode
Continuous-lapse is link up with time lapse when a photo is
taken without pressing shooting button after first time was
press. It is always recommended to set as off. If happen to on
function will require to press Shooting button to stop.
11.9.1
Press MENU or UP/Down button to select
continuous lapse once get into setting interface
11.9.2 Press Shoot button to confirm and enter for
selection
11.9.3 Press MENU, UP/Down button for selection and
Shoot button to confirm and exit back into setting interface
11.10 Power Frequency
11.10.1 Press MENU or UP/Down button to select power
frequency once get into setting interface
11.10.2 Press Shoot button to confirm and enter for
selection
11.10.3 Press MENU, UP/Down button for selection (50Hz,
60Hz, Auto) and Shoot button to confirm and exit back into
setting interface
11.11 Language
11.10.1 Press MENU or UP/Down button to select
language once get into setting interface
11.10.2 Press Shoot button to confirm and enter for
selection
28
© 2016 Maka Technologies Group. All Rights Reserved.
11.10.3 Press MENU, UP/Down button for 15 selection
(eg. Eng,Ch) and Shoot button to confirm and exit back into
setting interface
11.11 Date & Time
11.11.1 Press MENU or UP/Down button to select date &
Time once get into setting interface
11.11.2 Press Shoot button to confirm and enter for
selection
11.11.3 Press UP/Down button to set the date base on
YY/MM/DD.
11.11.4 Press Shoot button to confirm when selection
done to go next selection.
11.11.5 Press Menu button to exit back into setting
interface once setting completed
11.12 Sound Indicator
11.12.1 Press MENU or UP/Down button to select sound
indicator setting interface.
11.12.2 Press Shooting button to confirm and enter
selection
11.12.3 Press Shooting button to select between on/off for
shutter sound
11.12.4 Press UP/Down button to toggle next selection for
start-up, Beep and volumed
11.12.5 Follow steps 11.12.3 and 11.12.4 till setting
complete
11.12.6 Press Menu button to exit back into setting
29
© 2016 Maka Technologies Group. All Rights Reserved.
interface once setting completed
11.13 Upside Down
This function will be use when using a car mount mounting
onto dashboard use for driving recording purposes
11.13.1 Press MENU or UP/Down button to select upside
down once get into setting interface
11.13.2 Press Shoot button to confirm and enter for
selection
11.13.3 Press UP/Down button for on/off selection and
Shoot button to confirm and exit back into setting interface
11.14 Screen Saver
This function enable user to off the screen auto at a
stimulate timing set in order not to distract driver
11.14.1 Press MENU or UP/Down button to select
Screen Saver once get into setting interface
11.14.2 Press Shoot button to confirm and enter for
selection
11.14.3
Press UP/Down button for selection
(off,1min,3min,5min) and Shoot button to confirm and exit
back into setting interface
30
© 2016 Maka Technologies Group. All Rights Reserved.
11.15 Power Saver
This function enable user to monitor and help keep track if
card is functioning or not in operation. Device will shut
down base on time set too if device is not in use for
recording to save power consume.
11.15.1 Press MENU or UP/Down button to select Power
Saver once get into setting interface
11.15.2 Press Shoot button to confirm and enter for
selection
11.15.3
Press UP/Down button for selection
(off,1min,3min,5min) and Shoot button to confirm and exit
back into setting interface
11.16 Reset
Resetting will set the device back to factory default mode
setting. New setting will be require to do after this process
is done.
11.16.1 Press MENU or UP/Down button to select reset
once get into setting interface
11.16.2 Press Shoot button to confirm and enter for
selection
11.16.3 Press UP/Down button for on/off selection and
Shoot button to confirm and exit back into setting interface
31
© 2016 Maka Technologies Group. All Rights Reserved.
12.
Recording Playback
When camera power on, press UP button to switch to file
playback interface, showing video/photo Icon.
12.1 Press Up/Down button to toggle to playback icon
12.2 Press Shoot button to enter playback file.
12.3 Press Up/Down button to toggle file for playback
selection
12.4 Press Shoot button to start playback
12.5 Press Menu button to go back video/photo and follow
by Up button to exit into live view
13.
Photo Playback
13.1 Press Up/Down button to toggle to photo icon
13.2 Press Shoot button to enter playback file.
13.3 Press Up/Down button to toggle file for viewing
13.4 Press Menu button to go back video/photo and follow
by Up button to exit into live view
14.
Files delete
14.1 Press Up/Down button to toggle to video/photo icon
you wish to delete files from
14.2 Press Shooting button to get into the playback or
viewing file
14.3 Press Up/Down to toggle file you wish to delete
14.4 Press and hold Up button once file is selected to be
delete. Message prompt or delete will shown.
14.5 Press UP/Down button to select choice and Shooting
32
© 2016 Maka Technologies Group. All Rights Reserved.
button to confirm.
14.6 Press Menu button to go back video/photo and follow
by Up button to exit into live view
15 Wifi Connection
Wifi connection Press down button once to activated.
To off Wifi, press and hold 3sec to disable.
For Apps compatible device as listed
Apple IOS
iPhone5, 5s, 6 (plus), 6s (plus)(IOS9)
iPad Air and Mini
Android
Android 4X Quad-core device
15.1 Download EZ iCam Apps
or Scan QR below
15.2 Activate device Wifi connection
15.3 Wifi connection (iCam-Curve Xtreme50) will be shown
on mobile
15.4 Default password is set as 1234567890
15,5 Once Wifi is pair enter apps to add device
(iCam-Curve Xtreme50) and your ready to go.
33
© 2016 Maka Technologies Group. All Rights Reserved.
15. Troubleshooting
Question
Reason
Solution
The captured image is not MicroSD card might be full.
stored
Image is not saved before the
power outage.
Make sure to stop recording
before shutting down.
All buttons are invalid
Press RESET button to restart
the DVR.
Check SD Card if Formatting
works normally
Procedural error or faulty
Operation
Check if Sd Card faulty
Device cannot be turn on Device might be loaded with
or charge
battery or charging connector
might be faulty
Make sure battery is loaded
and if after charging, immediate
shut down happen, battery or
connector might be faulty.
Charge the Battery.
Screen Auto power-off
Device might have low battery
with loaded battery
Screen Saver function is
enabled.
Press on any button disable the
screen saver mode.
Low Battery.
Charge the battery
Unable to record videos Memory card might be full.
1 Check your memory card’s
space. Delete files if required.
If loop recording has been
enabled, memory card might be 2 Reformat your Memory
corrupted.
card, if issue still persists,
replace a new memory Card
34
© 2016 Maka Technologies Group. All Rights Reserved.
Auto stop recording in
video mode
Encounter “file
error” when trying to
playback pictures
or
videos “card
Encounter
error” when pictures
or videos recording
Use a compatible SDHC
Get a microSD card that has
microSD card for HD video
minimum 8GB Class 10 speed.
recording.
MicroSD card might be
Reformat the memory card.
corrupted. There bad sectors in
the card.
MicroSD card might be
corrupted.
Reformat the memory card. If
issue still persist, replace a new
memory card.
No image
Cable plug might not be plugged Ensure AV/ HDMI cable is plug
is displayed on a
in properly.
into the TV properly.
high-definition TV screen
Wrong TV Input mode
Refer to the back panel of
your TV to track the correct TV
input. Make sure you have
selected
the correct
input.
Hazy Images
Lens might be dirty.
Check
if there
are fingerprints
or dust on the lens. Clean it with
a micro fabric cloth if necessary.
There are horizontal stripes This could be due to wrong
interference on the image light frequency setting
Please set according to the
local power supply
respectively; 50Hz or 60Hz.
For SG/MY: 50hz
35
© 2016 Maka Technologies Group. All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising