user guide
USER
GUIDE
Thank you for purchasing a Danew product. Your DSlide Has been designed to
offer you a unique game experience on a touch tablet.
Before using your device, read carefully the use instructions exposed throughout
this manual.
It aims at familiarizing you with the technical features of your DSlide in order to
make its use easier.
NOTE : All information presented in this manual and on the box were current
at the time of printing. However, as we are permanently enhancing our products
through software updates, this manual and the box might not present all the
functions of your actual product.
Pictures are for illustration purpose only and are not contract-binding.
2
DSLIDE 1017
3
CONTENTS
P.6
1 - INTRODUCTION
P.6
P.7
Features
Buttons and device parts
P.8
2 - GETTING STARTED
P.8
P.9
P.11
P.13
P.15
P.16
P.18
Switch-on / Switch-off
Lock screen and power saving mode
Home screen and settings
Using the home screen
Sections and shortcuts on the home screen
USB connection
Reset
Using the touch screen
Data storage and file management
P.19
3 - INTERNET
P.19 Network connections
P.20 Wi-Fi configuration
4
P.20 Ethernet connection
Internet research
P.21 Internet navigation
Bluetooth
P.22
4 - TROUBLESHOOTING
P.24
5 - SUPPORT & WARRANTY
5
1
INTRODUCTION
FEATURES
Screen
Resolution
Processor
RAM
Internal memory
Network
Camera / Webcam
Battery
Multimedia
Speaker
G-sensor
Connectors
Dimensions
Weight
6
Touch capacitive 10.1’’ IPS
1280 x 800 px
RK 3126 Quadcore 1.3GHz
1 GB DDR3
32 GB Flash
Wifi 802.11 b/g /n
2 Mpx / 2 Mpx
5000m Ah Li-polymer
Formats supported by Android™
FM radio tuner
2 x 1 Watt
Yes
Micro USB OTG function
Micro SDHC card port
3.5 mm audio output jack
240.8 x 167.5 x 8.7 mm
524 g
BUTTONS & PARTS OF THE DEVICE
3.5 Audio Jack
Micro USB
Micro SD Port
Camera
ON/
OFF
Volume
+/ Microphone
Speaker
Speaker
Webcam
7
2
1
Switch-on
2
Switch-off
GETTING STARTED
Long pressing the ON/OFF button (3 seconds) will start your DSlide. The screen
plays an animation of Danew’s logo before loading the Android interface.
To switch off your DSlide, press the ON/OFF button (for approximately 3
seconds), screen switched on, the following screen (Fig 1) will appear :
When the battery is low, the device will automatically shutdown to save power.
8
3
Lock screen & power saving mode
A) Lock screen
When the device is on, short pressing the ON/OFF button will switch-off the
screen and enable the power saving mode or lock (after a period of inactivity, the
screen will automatically shutdown).
When this mode is enabled, the applications in use will not be closed.
The Wifi connection is automatically stopped in standby mode. It will
automatically be restored when you leave the screen saver.
Pressing again the ON/OFF button will display the lock screen. To unlock the
DSlide, slide your finger upwards.
9
B) Power saving
To optimize your tablet’s battery life, we recommend to follow the following tips :
•Screen
Do not use a 100% luminosity. The screen of your tablet is an energy consuming part
(when it is switched on).
In most cases, a 50% luminosity allows a sufficiently comfortable operation. To
change the luminosity, go to the point 6 of this manual.
To optimize the battery, it is also recommended to set the automatic standby mode
(in the case of inactivity). The shorter this period is, the better your battery life. To set
the standby period, go to the « Settings/Display/Sleep » menu.
•WiFi
The wifi connection is also an energy consuming part of your device. To optimize
your battery life, it is recommended to disable the Wifi connection when it is not
being used. For example, when your are watching a video of playing sound on your
tablet, you should disable the Wifi connection, you will then save up to 30% of your
battery life.
Click here to
enable/disable the
Wifi connection
10
4 Home screen & Settings
Back Button
Home Button
Open application
Application Button
Volume - Button
Volume + Button
11
Enables to configure Wifi
settings
View your Wifi Data usage
Brightness/Sleep/Wallpaper
Volume & sound environment
settings
Storage devices management &
memory status
Enable or disable Geolocalisation services
Accounts management
(Gmail, Facebook ...)
Configure Language/Keyboards/
Voice research
Date/Time/Timezone
settings
Information on the firmware
version
12
Applications management
View the battery power
Configure security settings of
your tablet
5
Using the home screen
a) When you are in the home screen, you can rotate your DSlide 90°. The
display will automatically adjust by switching from Landscape to Portrait and
vice-versa. You can display applications (shortcuts, Widgets…) on the home
screen.
b) Clicking on the “applications menu” button
applications installed on the tablet.
will display the list of
13
c) Install shortcuts / Widgets on the main interface screens.
A. To install shortcuts :
Drag & drop icons from the « applications » section to the main interface screen.
To do so, open the applications menu, then click and hold the icon pressed with
your finger.
B. To install Widgets :
Drag & drop icons from the « Widgets » section to the main interface screen. To
do so, on the main screen, click and hold your fingertip until the Widget menu
(see below) appears, then select the Widget with your fingertip holding down.
To delete an item from the desktop, click on the icon (or Widget) to select then
move the icon to the icon of the «Cross» format as shown below.
14
d) To close running applications
Click on the
“Open application(s) ” to view the list of running applications. To
close the application(s), hold your fingertip and slide the small application window
(to the right or the left).
6 Sections & shortcuts on the home screen
The home screen « Home » allows you to operate your tablet in different ways.
1) Note at the bottom of the screen an area with virtual shortcuts (Volume -/+ ;
Open application(s) ; Home ; Back)
2) A fixed dock where you can place your favorite applications for quick access.
3) The clock on the upper right corner of the screen. Press and hold the clock,
and slide downwards to view 2 sections.
Sliding downwards for the first time will display the notifications section. Slide
downwards again to view the quick settings section (Wifi ; Brightness ; Rotation
; Settings ; Battery level ; Airplane mode...).
15
To delete a notification, slide it to the right or the left.
7
USB Connection
When the DSlide is switched on and connected to a computer, a USB icon
appears on the notifications bar in the upper right corner.
Connecting to a computer enables you to synchronize content between your
device and your computer. You can also view the contents of the internal
memory and the memory card.
8 Reset
When the DSlide is not responding to your commands, it is likely that the system
encountered a problem. A system reset is then necessary. Using a thin object,
press the Reset button until the device restarts (your data will not be deleted).
9 Using the touch screen
Your DSlide is equipped with a fully touch interface. The basic movements are
explained below.
16
Select
Click once on an application, menu or option to run or
select them.
Hold
Maintain your finger pressing a selected item on the screen
for more than 2 seconds.
Move
Move a selected item on the screen.
Double-click
Click twice and quickly on an item on the screen.
Scroll
Move the finger quickly in the direction of the desired
movement.
Zoom
Place your thumb and forefinger on the screen.
Separate to zoom in and bring closer to zoom out.
17
10 Storage & File management
There are many applications called « File Browsers » that enable you to
manage your files (audio, video, documents and photos).
Internal Memory
SD memory card
Android supports different storage methods like memory cards, internal memory as
well as USB devices.
Applications are installed to the internal memory by default which provides the
biggest storage capacity.
You can use this space to create folders and organize your personal files.
The file manager also enables you to manage contents located on a memory card
(microSD) as well as a USB device.
Besides the internal memory, you can also create folders to organize your files.
18
3
INTERNET
1 Network Connections
Your DSlide can connect to Wi-Fi b/g/n networks as well as Ethernet networks
(option : needs a Usb Ethernet adapter sold separately)
To view the settings, click on the « Application menu » button
select “Settings”
then
On the new screen, click on “Wireless and networks” to access the connection
menu.
19
2 Wi-Fi Configuration
Click on «Wi-Fi» to access the Wi-Fi interface of the DSlide.
On this new interface, the Wi-Fi module starts a scan to reasearch available
Wi-Fi networks.
The list of nearby detected networks is displayed on the right, select the
Wi-Fi network corresponding to your router by clicking on its name. An icon
indicating the power of the signal is displayed on the right of the network
name.
Once the network name selected, a new window is displayed and prompts for
a manual entry of the password.
Click on «Login»
Once the connection established, the
Wi-Fi icon appears in the task bar.
3 Ethernet Connection
Your DSlide can also connect to Internet through a Ethernet cable. You need
a Usb Ethernet adapter to connect to the USB port of your tablet (sold
separately). Once connected to Ethernet, the configuration will be performed
automatically.
4 Internet
Once the connection established, you can surf the internet. To do that,
return to the main interface. Click on “Google Search” to enable the virtual
keyboard.
20
5
Internet Navigation
2
3
4
1
6
5
7
1 - Open a new tab
2 - Close the tab
3 - Return to the previous page or go to the next page
4 - Reload the web page. To abort reloading the page, click on
5 - Address bar. Click on this area to view the virtual keyboard and start an
internet research.
6 - To view the browser menu, click on the
right corner.
icon located at the upper
7 - Save to favorites the web page displayed.
6
Internet Navigation
To configure Bluetooth.
Click on
>
> Wireless and networks tab > Bluetooth
Enable Bluetooth to view the list of enabled and detected devices, the
bluetooth icon
will appear in the task bar.
Select the desired device to start Bluetooth pairing.
21
4
TROUBLESHOOTING
1
Charging
problem (does
not hold charge,
does not charge,
charging blocked
at X %...)
Try another charger (with the same connector
and voltage and current as the original). If you
don’t have another charger, try charging through
the USB cord of your computer. Keep the tablet
in charge for at least 4h on a wall socket and
more than 6h on the USB port of the computer.
2
Wifi connection
problem
Enable the Wifi in the «settings» menu of the
tablet. If the Wifi does not start ... restart the
tablet then retry (Reset the tablet). If the problem persists, proceed to System recovery (1).
3
No sound ;
Speaker problem ;
Headset problem
if no sound is emitted throught the speaker,
connect your headset to check the sound. If no
sound, proceed to System recovery (1).
4
Touch screen
not responding;
some areas do
not function on
the touch screen,
click on the wrong
place
Check all the touch screen areas for operation.
If the screen does not respond or malfunctions,
proceed to System recovery (1).
22
5
Tablet blocked at
the start screen ;
OS problem
If the tablet is held at start up on the Danew or
DSlide screen, proceed to System recovery (1).
6
Black screen The tablet can’t
start.
Do a « Reset » of the device. Otherwise,
connect the tablet to the wall socket and charge
it. Make sure the charge indicator lights (depending on the model). Allow to charge for at least
2 hours on a wall socket and more than 4h on
a USB port. If the problem persists, proceed to
System recovery (1).
(1)To recover the tablet, go to the section Support and Drivers & Manuals of the
website www.danew.com.
23
5
SUPPORT & WARRANTY
For firmware updates, please visit our website www.danew.com, then go to the
Support and Drivers & Manuals section.
To take advantage of the manufacturer warranty and the dedicated technical support,
please register the product(s) purchased during the month following the purchase date
: Go to www.danew.com, then to the Support & Product registration section
For customer service requests, you should first contact the technical support in order
to get the Return Merchandise Authorization RMA number. Returns without RMA
number previously obtained will not be accepted. Danew reserves the right to verify
that device malfunction is not a result of improper use or manipulation by the user.
Our technical support team will answer your questions from :
- Monday to Thursday, from 9h00 to 13h00, from 14h00 to 18h
- Friday from 9h00 to 13h00, from 14h00 to 17h.
TECHNICAL SUPPORT 0899 782 728 (from France)
Product with 1 year warranty and accessories with 1 month warranty starting from the purchase date.
Declaration of Conformity
Danew hereby declare, that the product above is in compliance with the essential requirements of the R&TTE Directive (1999/5/EC)
0700
24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising