SWR2100P Series Leaflet

SWR2100P Series Leaflet
L2 SWITCH
Simple L2 network switch with PoE
Yamaha LAN Monitor
A simple L2 switch “SWR2100P series” can supply power as well as audio and
control signals to a PoE-compliant Dante device such as the paging station
microphone “PGM1” through just one ethernet cable.
Since the power supply and the network wiring can be combined, the number
of cables being used can be reduced, and the connection distance can be
extended, so the degree of freedom of Dante device installation is increased and
construction flexibility is further improved.
Yamaha LAN Monitor can check the Yamaha network switch status and control it
remotely. Therefore, it is useful for trouble shooting.
ice
Off
Checkable Status:
Port Status, Bandwidth Usage and PoE Powered State
Controllable Function:
Reboot device connected with PoE port remotely by turning off and on PoE port.
System Requirements:
OS: Windows 10/8/7
CPU:32-bit:2GHz or faster Intel Core/Pentium/Celeron family processor
64-bit:Processor that supports Intel64 (however, the program will run in a
32-bit mode)
HDD:200MB or more free space (not including the Dante Controller)
Room 1
Detects the error
(loop occurrence.
equipment failure).
Yamaha LAN Monitor
SWR2100P-10G
MCP1
Room 2
Room 5
MCP1
MCP1
Room 3
Room 6
MCP1
MCP1
MTX5-D
XMV8140-D
Monitor and reboot the
terminal (PoE only).
Room 4
Information Center
MCP1
PGM1&PGX1
Specifications
Items
External dimensions
(W x D x H, Unit: mm)
Weight
Standard
LAN port
SWR2100P-5G
220 x 250 x 40.5
(Without any protrusion or feet)
220 x 250 x 40.5
(Without any protrusion or feet)
1.8 kg
1.6 kg
IEEE802.3 (10BASE-T/100BASE-TX/1000BASE-T)
Number of ports
Ports available for PoE power supply
PoE standards
10 ports
5 ports
9 ports (port 1–9)
4 ports (port 1–4)
IEEE 802.3at
Power supply system
Maximum
power supply
SWR2100P-10G
Alternative A
Per port
30W (Varies depending on the power consumption class of each connected device.)
All ports
70W
Compatible PoE powered devices
PoE powered devices that comply IEEE 802.3af standards or IEEE 802.3at standards
Status indicators
POWER, PoE LIMIT, LINK/ACT, SPEED, PoE STATE (x31)
POWER, PoE LIMIT, LINK/ACT, SPEED, PoE STATE (x16)
CONFIGURATION switches for modifying the settings (L2MS switch, Flow control switch, Auto MIDI/MIDI-X switch,
Loop detection switch, energy save mode switch)
Switches
Power supply voltage, frequency
AC100 V to 240 V, 50 Hz/60 Hz
Ambient temperature 0 to 40 °C
Operating
environment
Ambient humidity
15 to 80% (no condensation)
Storage environment
Ambient temperature: -20 to 50 °C
Ambient humidity: 10 to 90% (no condensation)
Power consumption
90 W
Life
86 W
10 years
Accessories
Owner’s Manual; power cord; power cord clamp; feet
Controls and Connectors
n SWR2100P-10G
1
n SWR2100P-5G
3
2
5
4
1
6
7
3
2
5
4
6
7
1
POWER indicator
2
PoE LIMIT indicator
3
LINK/ACT indicator
4
SPEED indicator
5
PoE STATE indicator
6
LAN ports
7
CONFIGURATION switch
The functions which can be set via the CONFIGURATION switches are as follows.
No. Setting function
CONFIGURATION switches
OFF
ON
1
L2MS (Layer 2 Management Service) function
Disabled
Enabled*
2
Flow control
Disabled
Enabled*
3
Auto MDI/MDI-X
Disabled
Enabled*
4
Loop detection function
Disabled*
Enabled
5
Low power consumption mode
Disabled*
Enabled
* This is the factory default setting.
RK-SWR rack mount accessory
Use this rack mount accessory to mount the unit in a 19-inch rack.
P.O.BOX1, Hamamatsu Japan
*All specifications are subject to change without notice.
*All trademarks and registered trademarks are property of their respective owners.
www.yamahaproaudio.com
LPA673
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising