Clipsal Datacomms Active Series
Clipsal Datacomms
Active Series
10/100 Mbps Fast Ethernet Switches Series
Media Converter Series
CLIPSAL DATACOMMS ACTIVE SERIES
10/100 Mbps
Fast Ethernet Switches Series
The Clipsal Datacomms 10/100 Base Switches Series is a simple, high speed
networking solution designed for growing businesses. It’s powerful enough to
support your needs. New applications provide outstanding network availability,
and help ensure access to the network from anywhere. The 10/100 Base
Switches Series lets you scale your network as your requirements change.
For the Clipsal Datacomms 5 and 8 port 10/100 Base Switches, the ‘Easy to
install and use’, ’Compact-sized design’ and ‘Simple Troubleshooting’ concepts
provide a very cost-effective series which offers 10/100 Mbps auto-negotiating
full-duplexing Ethernet ports.
The LEDs on the front panel allow network administrators to inspect the
network status and easily diagnose problems. In addition, the 24-port
Switch provides MDI auto detection. The 10/100 Base Switches Series help
administrators get rid of complicated switching management by providing
simple and easy installation and administration.
TECHNICAL SPECIFICATIONS
MODEL
95ESW16P10/
Standard Compliance IEEE 802.3 10 Base-T,
IEEE 802.3u 100 Base-TX
Ports
16
Network Speed
TP: Auto-Negotiation, 10/20Mbps,
Switching Topology
Store and Forward
Filtering/
100Mbps: 1488000 packets/second
Forwarding Rate
10Mbps: 14880 packets/second
MAC entry
8K-entry
LED indicator/port
3 (Link / Act, 100Mbps, FDX / COL)
Data Buffer
32K per port
Power Supply
100-240VAC auto-sensing
Operation
Temperature: 0-50˚C (Operating),
Environment
-30-70˚C (Storage)
Dimensions (mm)
400 x 172 x 45
Network Media
100 Base-TX: RJ45 STP/UTP, Category 5 Cable
10 Base-T: RJ45 STP/UTP Category 3-5 Cable
Certification
FCC class A, CE, CISPR Class A VCCI-I
Safety
UL, TUV/GS (EN60950)
MODEL
Standard Compliance
Ports
LED display
Dimensions (mm)
Power Requirement
Temperature
Humidity
Emission
Safety
95ESW5P10/
IEEE 802.3 10 Base-T,
IEEE 802.3u 100 Base-TX
5-STP
One for Power, Three for Speed
Link / Active and FDX / COL per port
171 x 100 x 28
7.5VDC, 800mA
0-50˚C (Operating), -10-70˚C (Storage)
10-80% non-condensing
(Operating and Storage)
FCC class A, CE
Depends on power adaptor
95ESW24P10/
IEEE 802.3 10 Base-T,
IEEE 802.3u 100 Base-TX
24
TP: Auto-Negotiation, 10/20Mbps,
Store and Forward
100Mbps: 1488000 packets/second
10Mbps: 14880 packets/second
4K-entry
3 (Link / Act, 100Mbps, FDX / COL)
32K per port
100-240VAC auto-sensing
Temperature: 0-50˚C (Operating),
-30-70˚C (Storage)
400 x 172 x 45
100 Base-TX: RJ45 STP/UTP, Category 5 Cable
10 Base-T: RJ45 STP/UTP Category 3-5 Cable
FCC class A, CE, CISPR Class A VCCI-I
UL, TUV/GS (EN60950)
95ESW8P10/
IEEE 802.3 10 Base-T,
IEEE 802.3u 100 Base-TX
8-STP
One for Power, Three for Speed
Link / Active and FDX / COL per port
171 x 100 x 28
7.5VDC, 800mA
0-50˚C (Operating), -10-70˚C (Storage)
10-80% non-condensing
(Operating and Storage)
FCC class A, CE
Depends on power adaptor
PRODUCT FEATURES:
• complies with IEEE802.3u, 100Base-TX, IEEE802.3
10Base-T standards
• 100Base-TX Fast Ethernet Switch
• 24 port models, Filtering / Forwarding rate for 100Mbps is
148800pps and that for 10Mbps is 14880pps
• 802.3x full-duplex flow control, half-duplex back-pressure flowcontrol to prevent packet lost for 16 and 24 ports switches.
CUSTOMER BENEFITS:
• In the 24 ports model, users do not have to worry if the cable
connected is a straight through or crossover cable
• By using Store & Forward technology, a faster error recovery rate
can be achieved than if using cut-through technology
• Network Bandwidth will be optimised by eliminating erroneous
packets through Runt and CRC filtering.
MODEL: 95ESW16P10/
MODEL: 95ESW24P10/
MODEL: 95ESW5P10/
MODEL: 95ESW8P10/
26 Clipsal Solutions
CLIPSAL DATACOMMS ACTIVE SERIES
Media Converter Series
Clipsal Datacomms Media Converters are designed to connect copper and fibre
optic media. They provide a simple and easy way to extend the connection
distance between Fast Ethernet UTP networks via optical fibre cabling, without
performance degradation. Clipsal Media Converters are an ideal solution for
extending distances between servers and workgroups located on different
floors or different buildings.
PRODUCT FEATURES:
MODEL: 95MC100FXST
• converts 100 Base-TX STP interface to 100FX(ST/SC)
interface. The fibre port of a converter operates at 1300mm
and uses SC, ST connectors..
CUSTOMER BENEFITS:
• users can extend the copper networks limited distance by
using the fibre network.
• easy product installation and management.
TECHNICAL SPECIFICATIONS
MODEL
95MC100FXST
Protocol
IEEE 802.3u, 100 Base-FX, 100 Base-TX
Connectors and Cables
Twisted Pair STP
Multi-mode Fibre
RJ45, Category 5 (EIA/TIA 568)
50/125µm, 62.5/125µm
Support Distances
Twisted Pair STP
Multi-mode Fibre
Dimensions
Weight
Power
100m / 328ft.
412m / 1,350ft. (Half-Duplex), 2km / 1.2mi. (Full-Duplex)
70mm(L) x 94mm(W) x 26mm(H)
210g (net)
5V DC, 1A, max.
100TX100FX ST MULTIMODE FIBRE CONVERTER
Environmental
Temperature
Humidity
0-40 ˚C
0-90% (non-condensing)
Clipsal Solutions
27
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising