Sentinel SE-1 by - LAMAX Electronics
Sentinel SE-1 by
Quick starting guide
The new
to be line
original b
should be
space for
Bluetooth 2.1
Micro SD card
Micro USB
FM radio
Audio imput
LED flashlight
Bottom overview
Next / Volume +
Back side
Front side
Back side
LED light
Previous / Volume Play / Pause / Handsfree
FM radio
Switch On/Off to turn on/off the device
Press – Go to
Previous / previous track
Volume -
Press – Go to
the previous
Press – Go
to previous
Hold – Decrease volume
Press – Stop /
Start playback
Play /
Incoming call:
Press – Answer call
Hold – Reject
Next /
Volume +
Press – Go to
the next track
Press – Turn
radio On / Off
Hold – Search
for stations
Press – Go to
next station
Press – Stop /
Start playback
Press – Go to
the next track
Hold – Increase volume
Press – Go to next mode
Press to turn LED light On/Off
Overview of voice alerts:
„Power on“ - the device was turned on.
„Bluetooth mode. Pair the device.“ - The unit is in Bluetooth mode and is ready for pairing.
„Paired“ - it has been successful paired with a Bluetooth
„Radio“ - the device is in FM radio mode.
„Audio imput“ - The unit is in playback mode, ready to
play audio recordings from device connected via the
3.5mm jack.
„SD card“ - the device is ready to play tracks from a micro
SD card.
Pairing with a Bluetooth device:
Press „M“ to go to Bluetooth mode. Speaker can be paired
with a device which supports Bluetooth 2.1 or higher.
In the list of active devices the Sentinel SE-1 is displayed
as „SE-1 by LAMAX Beat“.
Once paired, you will hear the notification „Paired“.
If the device is disconnected or the connection is lost you
will hear „Bluetooth mode. Pair the device”.
FM radio mode:
Go to mode by pressing „M“.
Connect the micro USB cable, which acts as an antenna.
To find all available stations hold down the „Play / Pause
/ Handsfree“ button. The device will then scan FM
frequencies and store all stations found.
You can then navigate between the stations using the
„Previous“ and „Next“.
Playback audio files from the micro SD card:
Enter mode by pressing „M“. Speaker announces „SD
Sentinel SE-1 then plays the MP3s stored on the micro
SD card.
Audio imput:
After connecting the audio cable to the AUX jack, it plays
music from any connected device.
Using handsfree:
To use this feature, you must have the Sentinel SE-1
paired via Bluetooth with a smartphone.
Calls can be accepted / rejected in the standard way
on the phone or accepted by pressing the „Handsfree“
button and rejected by holding the „Handsfree“ button.
LED light:
Pressing the „Light“ button turns the LED light on / off.
The speaker can be charged using the included micro
USB cable from any charger with a USB output or from
any computer equipped with a USB output. Charge the
device only under supervision.
Full English manual can be downloaded from here:
Die Bedienungsanleitung in Deutsch können Sie von hier runterladen:
Mode d‘emploi en français à télécharger ici:
Český manuál ke stažení zde:
Slovenský manuál na stiahnutie tu:
Instrukcja obsługi w języku polskim do pobrania tutaj:
Használati útmutató:
Srpski priručnik možete preuzeti ovde:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF